Any Specs On Msi's New Vid Card Series???

I was just curious on the new specs of the new cards that are coming out...

please go to:
http://www.msi.com.tw/program/products/vga/vga_index.php
and
http://www.theinquirer.net/?article=16115

Similar Messages

SATA & new vid card. Do I need a new PS?

The question(s).
Does a SATA drive need more power? I have an Athlon XP 1500 on a KM4M-V board w/512 ram. the PS is a 300W Silent X bought from Newegg 6 months back.
Does a dual vid card need more power?
The background.
I have been trying to fix a serious to random blue screen prob. It all started at some point while I was doing these upgrades.
1st - Install new 80G Seagate SATA drive. Works fine with the 64 mg.NVidia card that I have had for a year or so.
2nd - My son orders two Asus V9400X (Gforce4 MX4000) dual monitor vid cards (128 mg.). I take one. Everything seems fine with the Viewsonic 17" crt monitor.
3rd - New Neovo 19" LCD - last part.
The BSOD was really bad last week (I formatted & re-loaded the OS five times). Now it is just random. I pulled/re-seated cards, re-pluged plugs - helped but still have occasional blue screen.
Thanks for any help or ideas.

Not really, but an additional device always requires more power, especially during startup. Adding more devices always adds an accumulative power requirement.
Dual RAMDAC's do require a slight bit more power when operating in dual monitor mode, but nothing to speak of really.
Without the data the BSOD is giving, your power supply's make/model/specs (See Suggestions on posting and getting better answers at the top of this page for clarification on info.) it's all going to be guessing from here. My inclination is you are experiencing several problems, perhaps the power supply is now being pushed to it's limitations (see Is your problem caused by your PSU? )
Perhaps it is just a driver or OS issue. You can be running along just fine for a year or two, but adding new hardware and drivers, can push OS registry health over the edge. You may have to use a driver cleaner utility to remove the previous drivers completely before installing the new drivers. See http://www.drivercleaner.net

K7D Master keeps rebooting with new vid card

I had a GForce 4 ti 4600 128 MB and it ran stable for over a year. I just installed 2 different new videw cards had had the same results with both cards. When I installed the cards, they seemed to flake out and the screen would get worse and worse then the pc would reboot. I tried a GForce 5700 256 by gainward I think and now I have a GForce 5700 256 by MSI and having the same results. I just installed the latest drivers and the pic qit getting distorted but the pc will just reboot randomly after a few minutes of running. Sometimes 5 minutes sometimes 2.
Please help

http://www.msicomputer.com/product/detail_spec/product_detail.asp?model=K7D_Master_L
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=344&MODEL=MS-6501
What are your temps?
Remember to uninstall previous driver before installing a new one.

MSI N210-512D2 Vid card doesn't display graphics with MSI z77ma-g45 motherboard

New Motherboard: MSI z77ma-g45
New Card: N210-512D2
Does not display graphics.
I stick a HIS Radeon HD 5450 in the MB and its fine. I stick the N210-512D2 in a old dell and it's fine.
Whats making the N210-512D2 Card incompatable with z77ma-g45 motherboard?

Using it along an AMD card is quite useless and therefor results maybe wrong. Try the 210 alone in the other slot. Also please list system specs: >>Posting Guide<<

MSI's New Dominator & Apache Series Gaming Laptops Interview ..-with video

Let's see this fantastic video which is talking about msi new laptop GT70 Dominator and GE70 Apache. They intorduce the new features of GT70 and new design of GE70 in this new generation. Included SuperRaid2(SSD*3), SSE engine and 3K display....:o:o
source:newegg TV

i7 + gtx860m is no problem for all the pc games including crysis3 and bf4
the new launch nv 800m graphics is no wonder the most suitable platform for pc gamers.... (like me...haha)
Quote from: ginacheng;100875
GE60 Apache Pro Receives 4 out of 5 from CNET:cool:
[ATTACH=CONFIG]3667[/ATTACH]
Read the full article here: http://www.cnet.com/laptops/msi-ge60-apache-pro/4505-3121_7-35873286.html

K9N2 SLI PLAT 1 vid card for PhysX only make both cards run at 8x?

Hi all. I'm on the fence here as to what to buy. My current setup is (hopefully) displayed
in my signature.
Here is my concern as copied from the K9N2 Sli Platinum Manual:
"• 1 mazarine PCI Express x16 slot with x16 operation (PCI Express Bus SPEC V2.0 compliant)
• 1 light-blue PCI Express x16 slot with x8 operation (PCI Express Bus SPEC V2.0 compliant)
• When 2 PCI Express x16 slots are all installed, the PCIE x 16 lanes will auto arrange form x16/ x0 to x8/ x8. Do not use the light-blue slot when only one PCI Express x16 card is installed."
Is this normal for most SLI mainboards? I was thinking of upgrading in one of two ways:
1) Just purchase a 9600GT for PhysX only and pop it in the other PCIE 16x slot
OR
2) Go all out and buy another GTX 260 Core216 SC card, new Power Supply, and new PCIE Sound Card
and SLI the 2 cards together.
With option 1, will my GTX 260 get slowed to 8x ?? That may defeat my whole purpose for getting
another vid card and dedicate it for PhysX; would it slow the main card down enough to impact it greatly?
With Option 2, the reason for a new sound card is a second "2 slot" vid card means I'll only be able to use
one of the 2 PCI slots. Currently, I have a Fax Modem and a SB Audigy SE in them.
I use the modem on a regular basis to send/receive faxes, so I will have to replace the sound card.
Anybody know if a Creative Labs SB X-FI Titanium PCIe can fit in the 1x slot between 2 SLI'd Vid cards?
The 1x PCIE slot on this board is between the 2 16x slots, not the ideal spot I fear.
If it won't fit between, my ONLY other choice would be to use the on board sound, which I am
not fond of doing.
My whole intention here is to play Cryostasis better than it does now, AND hopefully be ready
for any newer games that incorporate PhysX. As it is now, I got Cryostasis free when I bought
my new vid card, nice of eVGA to do that
If I do this, I want it to be pretty future proof:
I don't want to make EITHER investment solely for one game only. I'd prefer to
go with option 2, but I REALLY don't want to find out AFTER I buy everything that
I can't fit the new sound card between the 2 SLI'd cards :(
Any help on this will be GREATLY appreciated,
thank you.

Quote
Is this normal for most SLI mainboards?
Yes it is
Quote
With option 1, will my GTX 260 get slowed to 8x ?? That may defeat my whole purpose for getting
another vid card and dedicate it for PhysX; would it slow the main card down enough to impact it greatly?
Yes, but that's not really slowdown read here: https://forum-en.msi.com/index.php?topic=115732.0

Help! Need a quick answer about motherboard + vid card

Hi everyone,
Okay I am pretty scared right now. I got a new vid card, the MSI n9008gt. I also got a 6pin PCI connector for my power supply to power the card. I have a 450watt power supply. And my motherboard is a GeForce7050M.
I put my card in, I attached the power supply to the card, and then plugged it in and pushed the power button.
I hear my motherboard fan, my HD, and the vid card fan. But no display, and nothing else... I think to myself, hmmm. So I unplug my card and take it out and use the intergrated card, and the fan starts up and my HD starts up, but still nothing happens. The motherboard doesn't even beep... Did I fry my motherboard....? :( This is what I fear the most.
(and no I'm not on that PC right now this is an older one.)

Quote from: asamkipas on 09-January-09, 01:27:27
haha I think it is the n9800gt catd...must be a typo
Oh please provide your full system spec
whoops, yeah it's the n9800gt. Typo.
Ok, my full system spec:
Processor    AMD Athlon 64 X2 Dual Core 5000+ Socket AM2
CPU Fan    AMD Original AM2 CPU Fan
Motherboard    ECS nVidia GeForce 7050M-M Motherboard
Memory    2GB DDR II 800 Memory 240 Pin (Major Brand) 　
Hard Drive    Western Digital 160GB 7200RPM 8MB Cache Serial ATA II
Optical Drive    LG 22X DVD RW + Dual Layer
Video    nVidia Geforce 7050 based with 2D/3D Graphic Engine up to 256MB Memory
Audio    Realtek ALC662 6-channel HD Audio
Network Card    Onboard 10/100 Network Card
Ports    6 USB 2.0 Ports, 1 Serial
Case    1285 Deluxe Black Tower Case
Power Supply    450 Watt Power Supply
(I just lazily copy and pasted, sorry for all the info hahaha)
But I'm figuring that I don't even hear the bios beeps, so the motherboard is just fried.

Disabling an intergrated vid card

Ok just purchased a new vid card for my hp pavilion 6600f which is vista 64 bit based. I need to disable the intergrated vid card but i have no idea ive seen several sites that say shut off the switch on the mother board, otheres say delete the nvidia 7100 drivers...another says to do it from the bios..
i put in the new card, and started the computer and hit f10 and went to the bios part where i can change the vid to pci express. but i have to say im lost here any suggestions or web sites to what i can do. Im pretty much a non puter guru so ill need something in steps lol.

If you have changed it to PCI Express and there is no other setting referencing onboard graphics in the BIOS, then you have disabled the onboard graphics. All you need to do is install the latest drivers and software for your new card (from the website of ATI or Nvidia) and you're good to go.

Vid card help

I dont have alot of money and am looking to upgrade my vid card,
This what i am looking at. http://www.newegg.com/Product/Product.aspx?Item=N82E16814127481R
This is what i have. http://www.newegg.com/Product/Product.aspx?Item=N82E16814130082
Will the MSI Open box vid card run circles around the Gts 8800 320. Or any suggestions would be great. I have 100 us Dollar budget. Thanks
I Play medal of Honor 2010 everyday.

Don't know about running circles but I do suggest you check some comparisons here http://www.anandtech.com/bench/Product/178?vs=173
The site allows you to select 2 cards to compare. The list is not that comprehensive, but check it out and see how much performance difference there is between the cards.

New Video Cards- Motion Performance

Anyone have any early insight on the new video cards and their expected performance with motion? Do you guys think the nVidia will out perform the ATI? As I recall, in the last batch the x1900 was the strongest for Motion.
Here are the new available build options for Mac Pros:
ATI Radeon HD 2600 XT 256MB (Two dual-link DVI)
2 x ATI Radeon HD 2600 XT 256MB [Add $150]
NVIDIA GeForce 8800 GT 512MB (Two dual-link DVI) [Add $200]
3 x ATI Radeon HD 2600 XT 256MB [Add $300]
4 x ATI Radeon HD 2600 XT 256MB [Add $450]
NVIDIA Quadro FX 5600 1.5GB (Stereo 3D, two dual-link DVI) [Add $2850]
Message was edited by: lightmast

Some offline discussions and various lists of high end users indicate "no one knows yet." The new systems have not been tested by experienced users who can offer opinions I would trust. I'd certainly not rely on Apple's promises or claims. Give the motion graphics and video worlds a few months to play with them.
We also have no definitive answer to "Will any of these new cards work in older Intel Macs?" There is already uncertainty whether the newer form factor cards will work in the older form PCI slots. The mfrs a[[ear to suggest they will.
Save your money for a few more weeks!
bogiesan

No vga new viedo card,mother board,power supply and cable

persario sr550r no vga signal on monitor,new cable,new power supply,new viedo card,new mother board,still no vga signal,I have tested monitor it is good?Do you need to remove any viedo chip when installing new viedo card?I can rebuild a car from ground up!This computer is kicking my butt! help!!!

Terkemoma, welcome to the forum.
Don't let the computer KYB! We'll solve the problem.
First, however, I believe that there is another number in the model of the computer. Once I have the full model I will see what I can do to help you.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

MSI NEW P.E. Series Video Card - GTX670 Power Edition 2GD5/OC with Twin Frozr 4

Glad to be back in the forum and I was been busy for awhile. By this time lots of PC hardware already came out especially from Nvidia. Just like today my share would be MSI's N670GTX PE 2GD5/OC video card.
First of all lets talk about the GTX670 GPU chip. This GPU is the younger sibling of GTX680 which uses the same 28nm GK104 chip but with one disabled shader cluster/core.The reference or standard GPU clock is 915Mhz with a turbo boost of 980 and as for the memory is concerned, it has a 256bit memory bus connected to a 2GB GDDR5 memory with speed of 6008Mhz. Just like with any Kepler based architecture, the card would also have all the goodies like "Adaptive V-Sync", "AA TXAA (Temporal Super Sampling)", supports "DX11.1" and improved 3D Vision Surround.
Moving on, let's check out now what MSI did with their GTX670 SKU based video card. The card is under a new Series named "Power Edition" (series comparison table below) and it comes factory overclocked from GPU clock of 915MHz to 1020MHz and Turbo boost of 980Mhz to 1080Mhz. It also comes with the 4th version of Twin Frozr Thermal Cooling design with a theme color of Black and Blue which matches the color of MSI's midrange to high-end motherboards as well. The dual 8cm PWM fan based cooler are equipped with Propeller Fan Blades which draws air better and now has the so called "Dust Removal Technology", basically as you startup your PC the fan will rotate counter clockwise for 30 seconds clearing the dust from the cooling heatsink. Adding a finishing touch, MSI equipped the video card with their Military Class III components ensuring the best performance, efficiency, higher overclocks and durability.
Additional Box Shots of the N670GTX PE OC
MSI Series Comparison Table
New Power Edition Series which is a notch higher than the basic Twin Frozr Series.
Below are some other basic specs of the card which not been mentioned above.
•CUDA Cores: 1344 Units
•Output: DisplayPort / HDMI / DL-DVI-I / DL-DVI-D
•Total Draw Power: 200W
•Card Dimension: 267x117x38mm
•DirectX: DX 11.1
•OpenGL: 4.2
•PCI Express: 3.0
•SLI: 3-Way Capable
•3D Vision Surround: 3 Output per Single Card
•Pure Video HD: Y
•HDCP: Y
•Minimum Power Requirement: 550W with 38A for the +12V Rail
Actual shot of the Rear Ports
The card is powered up by additional 2x 6Pin power connectors.
Five 8mm thick heatpipes design
In the future, there might be a GTX670 4GB GDDR5 version as you can see the empty spaces between the GPU memory chips
Bundled Accessories included in the package
•1x DVI to VGA Dongle
•2x 4 Pins Molex to 6 Pins VGA Power
•DVD Driver/Utility Disc
•Manual and Quick Guide
Test Sytem and Configuration
Processor: Intel i7 3770K @ Stock Speed / 4.8GHz / 4.849GHz
Cooler: Thermaltake Advanced Frio
Memory: 2x4GB Kingston HyperX DDR3 2133Mhz
SSD: Kingston HyperX 3K SSD 90GB
Motherboard: Z77A-GD80
Videocard: N670GTX Power Edition 2GB OC
PSU: Antec TPQ 1200
Softwares: Windows 7 64bit Ultimate, MSI Afterburner 2.2.2, Nvidia Forceware 304.48, GPU-Z 0.6.2, CPU-Z 1.60.1.x64, Futurmark Benchmark Softwares, HwBot Heaven DX11
Okey let the benchies begin 1st set of benchies @ stock settings
3dMark06 - 28799
Vantage - P31817
3dMark11 - P9530
Heaven DX11 - 1956.985
2nd Set - Processor @ 4.8GHz while the video card is still running at stock speed
3dMark06 - 35852 From the previous score of 28K it jumped to 35K. This is becuase 3dMark06, relies heavily on the clock frequency of the processor.
Vantage - P34377
3dMark11 - P9861
Heaven DX11 - 1986.539
3rd Set - i7 3770K @ 4.849GHz and the video card GPU clock @ 1070mhz with turbo boost at 1148Mhz and memory clock speed @ 1717MHz (6868Mhz effective rate)
3dmark06 - 36402
Vantage - P36194
3dMark11 - P10263
Heaven DX11 - 2140.223
That's it. I will share another hardware soon

@Bernhard
The card is not with me already :( it was just left for few days. Don't worry next time I will make some tests using Virtu MVP.
@Update
Afterburner 2.2.3 is already out and with this new version. You can overclock the PE better

MSI 990FXA stops at b2 with new gtx card

I just bought a new graphics card. The card is a palit GTX titan.
My specs is as follows:
AMD phenom 2 x6
MSI 990FXA GD65
Corsair h60 cooling
Antec 550Watt
120 SSD
Palit GTX titan
Now when I put my old card/'s in, it works perfectly fine, but when I have the titan in, it just stops at b2. Or when I combine the titan with my old GTX 460 it would just flash a bar in the top corner. My setup before used the GTX 460 as main card and GTX 285 as physics processor. This worked and still works, only when I insert with any combination and alone it does not go any further than the b2 code.
I need an answer urgently as I am using the unreal 4 engine and the older cards just does not work well, it is fairly slow. Any suggestions?? Thanx.

Oky, I am back and still stuck on b2 I bought a 850 Watt power supply rated 80 plus. But still I get the same b2 problem. I have an old rig, core2duo 3Ghz, foxcon mBoard with 4 GB of DDR 3 Ram, and tested my GTX titan on that with my now old PSU 550 Watt Antec, just to be sure it is not my card, but it boots and seem to work fine. It is just when I connect it to my MSI rig that it gets stuck on b2 error code. Any other suggestions??

Question about new video card from MSI - R7750-PMD1GD5/OC

Hello Folks,
I am afraid I can't find an answer to this anywhere, so I have had to post, even though I bet that somewhere, someone has asked this question before !!!!
I changed by Base Unit PC but kept my old monitors because I like them. I run two Acer AL1917's in extended mode.
Well, thats the problem, I did with the old PC which had a graphics card with two DVI outputs and it was easy to do by using two DVI to VGA converters.
However, the new PC has in it an MSI R7750-PMD1GD5/OC which has only one DVI, one HDMI and one Display Port.
Now, I know what the DVI and HDMI Ports are but have no idea what the Display port is!
THE MAIN PROBLEM IS I CAN'T FIND A WAY TO RUN TWO VGA MONITORS IN EXTENDED MODE with these three outputs?
The monitors are VGA ONLY, so is there any way I can use this display card at all to run two vga monitors in extended mode or should I just eBay it !!!
At the moment I have swapped it out for an old Nvidia GeForce GTS 450 which works fine with two DVI's. But I was rather hoping to be able to use my new MSI card.
Is there any way I can do this please?
Many thanks for any help that anyone is able to give.
With best wishes to all for the New Year Ahead,
Trevor
The New box is:
Advent
DT2315
CPU Intel Core i7-3770 CPU at 3.4GHz Ivy Bridge
Max CPU Speed 3900
Memory DDR3 Dual 4x4GB (16G)
Hard Disks Seagate 1x1TB + 2x2TB
2 x Acer AL1917 19" Monitors. VGA connections only !!!

Thank you very much.
On order as we speak. !!!!
All this just for those extra few miles of visibility in MS Flight Simulator X
The only two games I ever play when I have time, probably Easter now, are the aforementioned MSFS and X-Plane !!!!
Very Sad LOL !!!
Still, we shall see. I didn't know it was as simple as a cable because I always thought vga is anologue and HDMI is Digital, n'er the twain shall mix without a converter LOL
Never mind, I love being proved wrong because it means I have learnt something more in this wonderful life
Thank you again, will report back
Best wishes,
Trevor
Make: Advent DT2325
BIOS: AMD 27/6/2012 - v1.2B6
CPU: Intel Core i7-3770 (3400.0 MHz) (Clocked @ 3.5GHz (3.9GHz Turbo))
Motherboard: Advent DT2 (Intel B75 (Panther Point-M Enahnced) (Ivy Bridge-DT) (USB-V3.0) (PCI-e-V3.0))
Memory: 16 GBytes (Dual-Channel) DDR3 SDRAM 666.7 MHz (PC3-10600)
Graphics: PNY Nvidia GeForce GTS 450 (1024 MBytes GDDR5 SDRAM)
HD1: Seagate ST1000DM003-9YN162 (953,869 MBytes (1000 GB))
HD2: Seagate ST2000DM001-9YN164 (1,907,729 MBytes (2000 GB))
HD3: WDC WD20EARS- 00MVWB0 (1,907,729 MBytes (2000 GB))
Sound: Intel Panther Point PCH - High Definition Audio Controller [C1]
Netowrk: RealTek Semiconductor RTL8168/8111 PCI-E Gigabit Ethernet NIC
Display 1: Acer AL1917
Display 2: Acer AL1917
O/S: Microsoft Windows 7 Ultimate (x64) Build 7601 Service Pack 1

New hdtv card from msi

I seen this ad on msi for digital@nywhere card. got the specs they looked good but i cant find where to buy it.if i type in card name it tells me no such product any one know of this card

Digital@nywhere:
http://www.msi.com.tw/program/products/multimedia/mut/pro_mut_detail.php?UID=602
if you want recommendations where to buy one, you'd better tell us where you are, or fill Location information in Profile
here's one in Australia:
http://www.i-tech.com.au/products/3671_MSI_Digital__nywhere__Digital_PCI_TV.asp

Any Specs On Msi's New Vid Card Series???

Similar Messages

Maybe you are looking for