Any std report in Capacity Planning showing only dispatched orders/opns ?
Hi CRP gurus:
Does SAP has any standard report/transaction in Capacity Planning that shows (or has a selection for showing) only "dispatched" orders/opns ?
- Chetan
Chetan,
Use transaction COOIS. In this choose Operations, System status as DSPT at operation level, enter plant and execute. You will get only orders and the operations which are dispatched in this plant.
You can navigate to the capacity planning table from the selected records through order change.
Hope this is ok with you,...reward points..and close.
Regards
Ram
Similar Messages
-
Is thr any std report to find vendor excise details
Guru's
is thr any std report to find vendor excise details like CST,LST,ECC no.
Plz guide
Thamks in advancego to SE16
enter table name J_1IMOVEND enter
remove Maximum No. of Hits
press F8
Shift+ F8
click spreed sheet
give file name and select path
save
ur excle file is ready
reward if usefull -
Is ther any std report to know the overdue purchase order?
Hi,
Is ther any std report to know the overdue purchase order based on the delivery date.
regards,
vimalhi,
I don't think there is any report for your requirement...Pls contact ABAPer for the requirement...and refer the following reports and tables:
reports: ME2N/ME2M/ME2L
tables : EKET: delivery schedules for PO...
Regards
Priyanka.P -
Capacity planning and schedulng production order based on availabe capacity
Hi Gurus,
I am trying to use capacity planning, when the production order is created it takes the order start date as the requirement date. Then when i do he capaity check it says capaity not available. After finite scheduling again it proposes to shift operations by certain days.
I need the capity to be check in MRP and the palled orders to have start dates based on aviable capity, currenty all the palled orders are starting on the requirement date irresptive of avaiabe capaity. I tried using finite scheduling option in MD02 still it does not take in to account exsting production orders for giving dates of the planned orders.
Regards
AbhiDear Abhishek,
1) This is Std SAP of MRP, only material Av check will be carried out in MRP & create procurement
Proposals
2) Capacities will not Checked ( consider ) in MRP in Std R/3
3) Your Need can be only met through APO
Regards
Madhu -
Is there any standard report which give all info about purchase order.
hi
is there any standard report which give all information about purchase order.
i need following information from Purchase Order.
Vendor No, vendorname, PO No, basic Excise insurance Frieght.
Thanks.Hi,
Following are reports for PO list.
ME2C Purchase Orders by Material Group
ME2J Purchase Orders for Project
ME2K Purch. Orders by Account Assignment
ME2L Purchase Orders by Vendor
ME2M Purchase Orders by Material
ME2N Purchase Orders by PO Number
Message was edited by:
Vigneswaran S -
Is there any standard report for capacity of machines used /ideal
Hi,,
i am interested in knowing any standard report which tells us how long is my machine ( work center) ideal and how many hours i have used during a period of say one month.
how can we use capacity planning and work scheduling in repetitive manufacturing . pls tell me a the procedure to be followed.
thanks in advance
regards
madan mohanHi,
thanks for your reply . but i am not able to get a report on total capacity available in the last month and capacity i have utilized for that month . so that i can derive my work center ideal time during that past month.this gives the time i have kept the machine ideal . Is there any standard report meeting this requirement.
pls give me some solution
regards
madan -
VL10E report should show only sales order with complete stock
Hello Friends,
I have to make-to-order scenario. While creating a sales order the system proposes a delivery date based on the inhouse production day maintained in the material master.
In VL10E the system gives list of Sales Order for which delivery is due on that particular date. It does not check whether actually the material is really available on that date for the concerned sales order.
Is there any scope ( any config change or user_exit) which will show only the sales order with complete stock confirmed through production order in the VL10E report.
Regards
DebeshHi,
Check userexit LV50R_VIEWG02. If CF_SUBRC = 1 you will not see it in the list. For this purpose in the interfase you have the information in IS_VBEP. Set a break-point and check the conditions.
For more info check the Note 198137 - VL10: Customer-specific enhancements / user exits
I hope this helps you
Regards
Eduardo -
Is there any std SAP report which would show me the mtls on order from a particular vendor, with the cost of ordered mtls and also the scheduled dates for deliveries ?
ThanksUse report ME2L with ALLES as scope if list
-
Any Std Report to list POs for which IBD is created ?
Hi
Is there any std SAP report that tells us the list of PO numbers for which IBD has been created ?Hi,
Use Report ME2A - Monitor Confirmations
OR in ME2N, click on "Dynamic Selection" button and open "Purchasing Document Item" and double click on field "Confirmation control" and enter the selection criteria as per requirement and execute the report. -
Any good table for Capacity Planning?
HI all,
Is there any table for capacity planning?
we want to do some development to get capacity requirements data for each work center, don't like using CM01.
Thanks!
HarveyDear
Please find below SAP tables for CRP :
CRHD Workcenter Header Data
CRCA Workcenter Capacity Allocation
CRCO Workcenter Cost Center Assignment
CRHH Hierarchy Header
CRHS Hierarchy Structure
CRTX Workcenter Text
KAKO Capacity Header
KAZY Intervals of Capacity
Regards
JH -
Capacity Plan for Partially Confirmed Order
Hi Guys
Can any one please guide me on Capacity Planning (CM29) how to:
1. Plan to plan a partial order. Or in other terms: how to plan a part order in wk1 and rest in wk2
2. If the process order is partially confirmed, then how should supervisor re-schedule it again for later date!
3. Ideally what should be followed:
a. Schedule the Planned Order on CM29 and then Convert them to Process Order , OR
b. Convert the Planned Order and then Schedule the Process Order on the CM29 screen
Thanks in advance
-RahulHi Mehdi,
Once order status is PCNF you cannot create lot with inspection type as 03. You need to reverse all the confirmations/Goods issue and activate 03 inspection type in material master, maintain MIC related data in routing and do Read Master data. Then system will create inspection lot.
For 03 inspection type manually inspection lot cannot be created. Once order is released inspection lot will be automatically created by system.
Thanks & Regards,
Ramagiri -
Asset Depriciation details -monthwise in any Std Report?
Hi
Can any one give me Standard Report in Asset Management which gives the details of Depreciation calcuations monthwise for Assets.
pl help
thanx in advance
regards
SrihariHi,
if you mean how to calculate depreciation value for an asset, then you can check it on t-code AW01N. Go to Tab "Parameter", then click on button "Display Key". It will show the detail of depreciation key for an asset.
You will get more information for depreciation key on this link :
<a href="http://help.sap.com/saphelp_46c/helpdata/en/4f/71fd71448011d189f00000e81ddfac/frameset.htm"></a>
in ART0, for some depreciation report, it will only show the depreciation key. For Detail of the depreciation key, you can get it in configuration(t-code AFAMA) or AW01N.
hope it can help you.
Regards -
Std report to view planned price1, planned price date1 in view costing 2
Hello Guru
Is it possible to view planned price1, planned price date1 in view costing 2 in material master using standard SAP report when I select specific material and plant in selection screen ?
I really want standard SAP report but don't want to create my own query specific for this case
Any reply would be appreciated
ThanksHI,
In Table SE16N - MBEW you can get the planned price data.
Regards,
BK -
Create a Report with InfoPath to Show Only Some of Data in a Custom List
I have to create a report using InfoPath from a SharePoint 2010 custom list.
The report has 8 columns, and there will be four repeating? tables in it, each table including data that is filtered from the bigger list to meet two criteria. All the items in all four repeating tables will meet one of the criteria (Type of Task field
= Human Capital) and each of the other four repeating tables will be different depending on the contents of the Personnel Action Location field. Neither Type of Task or Personnel Action Location will be columns in the repeating tables.
How can I filter data from a custom list as it goes into a form?
Can I do this on fields that don't otherwise appear in the form?
If I can just figure out how do to one form, we can do many, many more, and finally really move over to SharePoint, but I just need to get the first one figured out please. Thanks!Hi,
If you would like to connect data to InfoPath form from SharePoint list, you could make use of Data Connection. You could locate it via InfoPath form > Data ribbon > Get External Data > From SharePoint List.
And here are the links to use it for your reference:
Add a query data connection > Step 1: Add a secondary data connection
http://office.microsoft.com/en-in/infopath-help/add-a-data-connection-to-a-sharepoint-document-library-or-list-HP010093160.aspx
SharePoint List Data Connections in InfoPath 2010http://blogs.msdn.com/b/infopath/archive/2010/05/06/sharepoint-list-data-connections-in-infopath-2010.aspx
Regards,
Rebecca Tu
TechNet Community Support -
Capacity Planning for all Sales Order Items
Sir,
A Sales Order have 4 different line items & need to produce on single work center.
In schedule line of sales order requirement dates are given priority wise.
After running the MRP I have observed that for all schedule lines, all planned ordered are starting on same date & time on the given capacity.
I need to level it manually.
Here I have few Question.
1) Can Capacities are Scheduled as per priority given in SO automatically.
2) Can revised availability dates will be reflected in SO.
3) Which reports will be useful for understanding consolidated availability date of material for given sales order/s.
RegardsDear ,
To answer the question for Capacity requirement planning on sales order I would say that MRP does only materials planning based on demand and reciept but never does Capacity Requirement Plannig .MRP generates Planned Order and susequently , production order can be genreted and farther you can carry out capacity requirement planning based on the work cente available capacity , requirement and load for those MTO orders .
But there are SAP business suit like APO-SNP APO PPDS which carriy our details scheduleing and caapcity check based on the demand situation : Sales Order ,Independent Order and does capcaity vaialbality chek for those demands while planning .
Now , here is the answer of your question :
1) Can Capacities are Scheduled as per priority given in SO automatically. : Not possible through SAP MRP but in APO-PPDS, APO-SNP-CTM , Herustic model .
2) Can revised availability dates will be reflected in SO. : It can be reflected as per the ATP chekc , Replishmenet Lead Time and re-scheduling horizon maintained in OPPQ-Carry all overall plant parametres.
3) Which reports will be useful for understanding consolidated availability date of material for given sales order/s. : You can check through MD04/MD05 or in sales order -Availaibility check -Schedule Line -Availaibility date .
Hope your are clear about the requirememt .
Regards
JH
Edited by: Jiaul Haque on Jun 5, 2010 1:59 PM
Edited by: Jiaul Haque on Jun 5, 2010 1:59 PM
Maybe you are looking for
-
Date + time with .dmp file name
I have created a batch file for full db export in Oracle 8.1.7.0.0, the batch file is taking full backup, but I want to append date and time with file name.. Edited by: oracleRaj on Sep 19, 2010 10:25 PM
-
Transfering data from I pod to computer to help orginize music
Hello, I would like to know how(if possible) to transfer data(song ratings/on the go play lists)to my computer to help me orginize my music files. Thanks in advance, Doja
-
How do I get my windows 8 computer to recognize my 6th gen ipod nano
how can i get my windows 8 computer to recognize my 6th gen ipod nano?
-
WebStart and application parameters
Ok, please forgive me if I'm being stupid. I saw the question on the JWS Unoffical FAQ but the answer is worded pretty oddly and I'm left a bit confused. ("You can add parameters as follows ... However, WebStart will then bomb badly, " etc) -- I need
-
Separate table and index data in RAC database
Hi Experts, Our database is Oracle11g RAC database. I need your expertise on this Do we need to retain the table and index data in two different tablespaces for performance perspective in RAC database too? Please share your practical experience-Thank