Any step to use new org with related shipping plant ?

Hi experts
now we need create sales order under one sales org A , and shipping plant is B.
Currently, This sales org A is not assigned to plant .
I hope to check for this target, if we only need assign this org to plant B, then we could place sales order under this org? 
Any other configure need be done? 
Thanks
ALice

Hi Alice
Do the following configuration and assignments
Step 1 : IMG -> Enterprise Structure -> Assignment -> Sales and Distribution -> Assign sales organization - distribution channel - plant
Step 2 : In OVL2 assign to the shipping point , loading group and shipping conditions assign the  delivering plant
Regards
Srinath
Edited by: sri nath on Jan 14, 2009 3:06 PM

Similar Messages

  • When i press any part at safari new tab with mackeeper open automatically

    when i press any part at safari new tab with mackeeper open automatically

    when i press any part at safari new tab with mackeeper open automatically

  • Using new trackpad with new iMac

    Using new trackpad with new iMac, but can't seem to get the "touch function" to work. I still have to press firmly and click on the trackpad to get response. The videos show "touch" while I  "firm press and click."  Checked speed, cleaned it, and reset. No luck?? Ideas? Even took back to Best Buy and seemed to work with their display...

    Assuming you are talking about tap to click, you would need to enable it. It is disabled by default. Go to settings and choose trackpad settings. Navigate to "Point and Click" tab and enable "Tap to Click".

  • Is there  any way to use osmf plugin with videodisplay component?

    Hello
    i use flex sdk hero (17689 build)
    i want to use OSMF plugin for the  captioning. i created object of media element with metadata for captioning plugin so  eventually i get object of CaptioningProxyElement type from mediaFactory ,  than i pass it to the source of videoDisplay> in source setter of videoDisplay setUpSource()  is called . in setUpSource  the type of source is checked and videoElement is created and assinged to videoPlayer( of type MediaPlayer) according  to the source type.The problem is that  my source is of type  CaptioningProxyElement (extended from MediaPlayer) so setUpSource ignores it , eventually not assining it to videoPlayer.  i can't extend VideoDispay and override source either , since videoPlayer is of type mx_internal , it's not accessible .
    thanks in advance.
    private function setUpSource():void
            // clean up any listeners from the old source, especially if we
            // are in the processing of loading that video file up
            cleanUpSource()
            // if was playing a previous video, let's remove it now
            if (videoPlayer.media && videoContainer.containsMediaElement(videoPlayer.media))
                videoContainer.removeMediaElement(videoPlayer.media);
            var videoElement:org.osmf.media.MediaElement = null;
            // check for 4 cases: streaming video, progressive download,
            // an IMediaResource, or a VideoElement. 
            // The latter 2 are undocumented but allowed for flexibility until we
            // can support OSMF better after they ship OSMF 1.0.  At that point, support
            // for a source as an IMediaResource or a VideoElement may be removed.
            if (source is DynamicStreamingVideoSource)
                // the streaming video case.
                // build up a DynamicStreamingResource to pass in to OSMF
                var streamingSource:DynamicStreamingVideoSource = source as DynamicStreamingVideoSource;
                var dsr:DynamicStreamingResource;
                // check for two cases for host: String and URL.
                // Technically, we only support URL, but we secretly allow
                // them to send in an OSMF URL or FMSURL here to help resolve any ambiguity
                // around serverName vs. streamName.
                if (streamingSource.host is String)
                    dsr = new DynamicStreamingResource(streamingSource.host as String,
                                                       streamingSource.streamType);
                else if (streamingSource.host is URL)
                    dsr = new DynamicStreamingResource(URL(streamingSource.host).host,
                                                       streamingSource.streamType);
                if (dsr)
                    var n:int = streamingSource.streamItems.length;
                    var item:DynamicStreamingVideoItem;
                    var dsi:DynamicStreamingItem;
                    var streamItems:Vector.<DynamicStreamingItem> = new Vector.<DynamicStreamingItem>(n);
                    for (var i:int = 0; i < n; i++)
                        item = streamingSource.streamItems[i];
                        dsi = new DynamicStreamingItem(item.streamName, item.bitrate);
                        streamItems[i] = dsi;
                    dsr.streamItems = streamItems;
                    dsr.initialIndex = streamingSource.initialIndex;
                    // add video type metadata so if the URL is ambiguous, OSMF will
                    // know what type of file we're trying to connect to
                    dsr.mediaType = MediaType.VIDEO;
                    videoElement = new org.osmf.elements.VideoElement(dsr, new RTMPDynamicStreamingNetLoader());
            else if (source is String)
                var urlResource:URLResource = new URLResource(source as String);
                videoElement = mediaFactory.createMediaElement(urlResource);
                // If the url could not be resolved to a media element then try
                // telling osmf the media is a video and try again.
                // We do not specify the media type as video the first time,
                // so we can have the chance to play audio.
                if (videoElement == null)
                    urlResource.mediaType = MediaType.VIDEO;
                    videoElement = mediaFactory.createMediaElement(urlResource);               
            else if (source is MediaResourceBase)
                videoElement = mediaFactory.createMediaElement(MediaResourceBase(source));
            else if (source is org.osmf.elements.VideoElement)
                videoElement = source as org.osmf.elements.VideoElement;
            // reset the visibilityPausedTheVideo flag
            playTheVideoOnVisible = true;
            // set up videoPlayer.autoPlay based on whether this.autoPlay is
            // set and whether we are visible and the other typical conditions.
            changePlayback(false, false);
            // if we're not going to autoPlay (or couldn't autoPlay because
            // we're hidden or for some other reason), but we need to seek
            // to the first frame, then we have to do this on our own
            // by using our load() method.
            if ((!autoPlay || !shouldBePlaying) && autoDisplayFirstFrame)
                load();
            // set videoPlayer's element to the newly constructed VideoElement
            // set the newly constructed videoElement's gateway to be the videoGateway
            videoPlayer.media = videoElement;
            if (videoElement)
                if (videoElement.getMetadata(LayoutMetadata.LAYOUT_NAMESPACE) == null)
                    var layout:LayoutMetadata = new LayoutMetadata();
                    layout.scaleMode = scaleMode;
                    layout.verticalAlign = VerticalAlign.MIDDLE;
                    layout.horizontalAlign = HorizontalAlign.CENTER;
                    layout.percentWidth = 100;
                    layout.percentHeight = 100;
                    videoElement.addMetadata(LayoutMetadata.LAYOUT_NAMESPACE, layout);
                if (videoElement && !videoContainer.containsMediaElement(videoElement) )
                    videoContainer.addMediaElement(videoElement);
            else
                // if our source is null, let's invalidateSize() here.
                // if it's a bad source, we'll get a playbackError and invalidate
                // the size down there.  If it's a good source, we'll get a
                // dimensionChange event and invalidate the size in there.
                invalidateSize();

    See my FAQ*:
    http://www.macmaps.com/macosxnative.html#SCANNER

  • Sync used new iPad with iTunes w/o setting as new device or restoring

    Hi,
    few weeks after using new iPad that never synced with iTunes (backing up to iCloud), i want to sync iBooks and Aperture photos from iTunes library.
    But, when i connect my iPad to iTunes using usb cable, there are only two choices: Set as new device or restore from older backup. I dont want to sync anything but iBooks and photos. What could i do?

    Hmm, is Whitson's iPad the current name of the device, or an earlier iPad? Does that image you've shown occupy the entire iTunes window or is the usual column of library sources and playlists shown down the left-hand side. If the list is there then the iPad should appear as a device that you can right/option/cmd-click on. Failing that with all your purchases having come from the store you should be able to set up as new device and then reacquire all your store content but that would lose any data and settings. I suppose that after restoring as new, then backing up to the machine, you could then try restoring the backup from the cloud, and then if needed go through the original process as I suggested.
    You might find that if you opt to set up as new nothing actually changes until you choose some content to sync, which may give you the opportunity to use the process I've previously outlined. Sorry I can't be clearer but I know that method has worked for a few people who have had to switch computers after a crash. I'm not personally familiar with the process under your precise circumstances.
    The "cut the cord" feature which allowed you to set up the device without connecting to a computer is all well and good but if you have to go through this sort of effort when the time comes that you want to hook up your device to a library on your computer it becomes a complete nightmare.
    tt2

  • Why not use "new" operator  with strings

    why we not use new when declaring a String .because in java String are treated as objects. we use new operator for creating an object in java .
    and same problem wiht array when we declare array as well as initialize .here we are alse not using new for array
    why

    Strings aren't just treated as objects, Strings are Objects.
    As for why not using new for Strings, you can, if you want.:
    String str = "this is a string";
    and
    String str = new String("this is a string");
    do the same thing (nitty-gritty low level details about literals aside). Use whatever you like, but isn't it simpler not to type new String(...) since you still need to type the actual string?
    As for arrays, you can use new:
    int[] ints = new int[10];
    or
    int[] ints = { 0, 1, 2, 3, ..., 9 };
    But the difference here is you are creating an empty array in the first one, the second creates and fills the array with the specified values. But which to you often depends on what you are doing.

  • Using new shufflw with itunes 6

    Can I use a brand new shuffle with itunes 6? I hate 7 but when I connect the shuffle it says it needs the itunes update to 7? Can I format the new shuffle for itunes 6? Thanks!

    New iPods need iTunes 7.0.2 minimum, to funcion properly.

  • Trying to use new nano with old mac

    Hi, I was wondering if someone could give me some advice.
    I recently received an ipod nano as a gift. Unfortunately, my ibook is from 2001, and i am still running the original OS 10.
    From what I have read in these discussion forums, it would probably not be wise for me to try to install OS 10.4 on my computer. However, I believe that OS 10.4 is needed for my computer to be compatible to my nano.
    I have hundreds of songs on my ibook, which I would really like to transfer to my new ipod. What can I do?
    thanx
    ibook Mac OS X (10.0.x)

    Apple's minimum specs for the Nano are 10.3.x basically because that was the first version of the MacOS to support USB 2. However, many people, including my wife, are using a Nano with computers that have USB 1. So the real limiting factor is what version of the OS your computer can comfortably run. I wouldn't recommend 10.4 but 10.3 is certainly doable. I know several people running around with the colored iBooks running 10.3. And certainly 10.2 is doable though I don't know if iTunes 6 will run on Jaguar.

  • Any way to use News Group Reader for Discussions?

    After the last few days of slow forums and the loss of notifications of posts... just curious. Is there any way to view these forums with a news group reader like Entourage or Halime or any Apple product?
    If not... it would be nice...

    Jefferis,
    Hopefully you will no longer need this as Apple Discussions performance has improved greatly, but I will point out that you can create RSS feeds from search queries.
    Unfortunately there has never been enough requests for newsgroup access for us to invest it. We get about one request per year.
    Kind regards,
    Mark
    Apple Discussions

  • Is there any way to use agfa snapscan with os lion

    Is there any way to use an old agfa snapscan with os lion

    See my FAQ*:
    http://www.macmaps.com/macosxnative.html#SCANNER

  • Any plan to release new reader with front light?

    I want to buy a new reader for my son.
    Since I'm quite happy with my sony ereader,
    I'm considering buying one from Sony,
    but my son insists that he should get one
    with front light.
    I wondering if there is any possibility that
    Sony releases one with front light in near future.

    Hello,
    We cannot speculate if a product will have functionality in the future that it currently does not have. We can only answer questions on drivers, products, and assistance with products that have already been released to the public and cannot provide an answer to future events, nor can we provide a guess when or if any of these features will be implemented.
    Thank you for your post.

  • ITunes won't recognise device using new PC with windows 8

    i have a new PC with windows 8. iTunes is loaded but it will not recognise any devices to sync or back up. Please advise. Thanks

    Start withiOS: Device not recognized in iTunes for Windows
    and then go toTroubleshooting issues with iTunes for Windows updates for more help.

  • Org unit relation ship periods

    Dear All,
    Scenario:-
    I have created a root or unit,under this root org unit i have created additional org units but the validity period box contains to validity periods are there.
    organisational unit  :
    Link text string :
    The above two will be displayed as Object period and relationship period on the screen.
    Here my doubt is if i enter the date for organisational unit beyond the root organisational unit its allowing but in case of link text string(relationship period) its not allowing.
    can any body explain the logic behind this issue.
    Thanks inadvance
    Regards
    Ananya.K

    Hi,
    System will allow you to create Any number of Org units as the sys doesnot know which is the root org unit , Sub unit  but when your maitaing relation ship it will check based the relation your goping to assign.
    Regards,
    Sri

  • Is there any way to use iPod touch with Win2000/SP4?

    Got an iPod touch for christmas... very cool. It doesn't synch with my computer... not so cool.
    The information I've found - compatibility chart at http://docs.info.apple.com/article.html?artnum=60971 - suggests that I'm SOL with Win2000 - it appears that I can't upgrade past iTunes 7.3 whereas 7.4 seems to be required for the Touch. Are there any hacks our ways around this, or am I just going to have to suck it up...? I don't like using sketchy pirated OS's but I'm not real excited about going out and buying a new OS either.

    There is no way for you to use iTunes with Win2K and the Touch. You can use 3rd party software, WinAmp, with a plug-in: http://www.winamp.com/ but this will not let you download upgrades and purchase 3rd party software for the Touch when it becomes available.

  • HT4864 Is there any way to use POP mail with iCloud?

    Hi newbie here, so be kind!  Just trying to set up iCloud on my new iPad, my iPhone 3G and my oldish Windows PC running Vista.  I have managed to get the iPad and iPhone running relatively well, but the real reason I wanted to synch all my devices was because I am buried beneath all the emails that I receive each day and cleaning them off three devices was a real hassle (1st world prob I know).  My PC is running Windows mail because I couldn't get Yahoo mail to run on POP or IMAP settings. So I have been happily downloading Yahoo mail (via) POP into Windows mail for a few years now.  However I have hit an Apple Support doc saying that I cannot use POP settings in iCloud (if you know what I mean), I have to use IMAP.  Can anyone help me with what settings I need to put in Windows Mail to make it sync with the mail client on my phone and iPad?
    Any help would be much appreciated.
    GB

    Gmail and all POP systems are not iCloud mail. iCloud mail ends with @mac, @me or @icloud.com, Gmail and POP systems are not handled by iCloud mail systems.

Maybe you are looking for