Any steps for Setting up NetTalk on M20

I notice there is a method to set up xbox for use on cisco valet router m20 by accessing the router page and tweaking some of the settings.
Is there a similar method to dedicate one of the router ports for use by NetTalk?
I have inconsistent performance and think the router may need tweaking.
I think NetTalk can be set to 4.2.2.2 (or something to this effect)
If anyone is interested in what I am experiencing - when NetTalk is plugged into the router, the led light for the port is blue while the other leds stay green. Which I think is correct and a good thing.
However, sometimes the NetTalk goes off line and i have to disconnect it from the router to re-establish connectivity.
And sometimes all the ledsl turn blue and requires that i unplug the NetTalk gadget from the router and reset everything.
Update to above post:
The following response was provided to me by NetTalk Support. Can anyone help me execute the steps below?
" Hello,
We believe a port change in your unit may alleviate your current issue. Please, if possible, place your DUO on the DMZ option of your router by logging into the router interface and placing the DUO's IP into the DMZ.
Alternatively you can port forward Port 80 TCP to the IP of the DUO. This will allow us to gain access to the DUO via the public IP from our end and allow us to make the necessary port change. Let us know when this is done.
Once this is done please visit http://www.canyouseeme.org/ and check to see if port 80 is visible. If it is visible then generally we should be able to access your unit."
Solved!
Go to Solution.

@ HDNUT
Well, if you are using (or want to use ) nettalk directly from your router, there is no problem with configuring the router with placing the nettalk ip in DMZ.
If setting up a DMZ dedicated to for the NetTalk device doesn't improve your situation, you will likely need to send the unit in for replacement or get your money back from the retailer due to the device being incomptable with your system. My suggestion is to get your money back and try something else.
(Unfortunately, I waited too long for the NetTalk people to help me and i forfeited my option to return the inoperational device for a refund. NetTalk finally sent me a firmware update which killed the device DEAD. It required a number of emails and then threats and many weeks to finally get them to issue a replacement. To date, i havent received one yet and it may not still work when i do. So i recommend for you not to wait if device isn't working after setting up the DMZ.)
In any case, when the router no longer has NetTalk connected to it, you can remove the DMZ settings from via the router page.
The steps for configuring the DMZ are provided in this thread. (They were eventually provided to me by the NetTalk people and I saved them on this thread for others.)
Good Luck !
PS: A friend of mine has the same computer configuration as i do but uses OOMA VOIP with great success but its pricy.

Similar Messages

HT5463 I turn the do not disturb button on and I am not given any options for setting or calls allowed. Does anyon have a fix for this?

I turn the do not disturb button on and I am not given any options for setting or calls allowed. Does anyon have a fix for this?

Do Not Disturb and Notifications
Push notifications appear in Notification Center and alert you to new information, even when the
associated app isn’t running. Notifications vary by app, but may include text or sound alerts, and
a numbered badge on the app icon on the Home screen.
Turn off all notifications: Go to Settings and turn on Do Not Disturb. When it’s turned on and
iPhone is locked, all notifications and calls are silenced, but alarms will still sound. You can set the
following options in Settings > Notifications > Do Not Disturb:
• Automatically turn on Do Not Disturb: Set the starting and ending hours for when you don’t
want to be disturbed. iPhone turns on Do Not Disturb during these hours each day.
• Allow some phone calls during Do Not Disturb: When Do Not Disturb is on, calls are silently sent
to voice mail. To allow some callers to ring through, tap Allow Calls From. You can allow calls
from your Favorites list or other Contacts groups you define. For information about Favorites,
see Chapter 25, Contacts, on page 100.
• Allow persistant callers to ring through: Turn on Repeated Calls. If the same caller (based on
their Caller ID) calls you twice within three minutes, iPhone will ring.
Turn an app’s notifications on or off: Go to Settings > Notifications. Tap an item in the list, then
turn notifications on or off for that item. Apps that have notifications turned off appear in the Not in Notification centre

Any solution for setting up usb boot on Windows?

I really want to try this OS, and my computer cant boot from a DVD.
Is there any solution for setting up a bootable usb stick on Windows?
I tried programs that claimed they could open the Solaris .usb files, but they were unsuccessful.
Or maybe a Solaris developer could set up a .iso image thats suited for usbs? that would be the end to all this trouble.

Actually I managed to get it working in Virtual Box, by changing BIOS settings. I'm currently using Solaris to type this reply.
And it has made a good impression on me. Gnome desktop, apache web server included by default, workspaces viewable from desktop.
I would have preferred to boot it through USB, as Virtual Box is only feeding it 900mb of ram. But for now it will do.

HT201320 Any suggestions for setting up a telusplanet (server) email account on iphone 4s? Nothing seems to work.

I have been trying to set up Telus email account on my Iphone 4s with no success. Pop3 account on telusplanet server. Any suggestion?
Ron

This was by far the best tutorial I found for setting up my own personal mail server:
http://workaround.org/ispmail/squeeze
I couldn't recommend it enough. There are a few quirks in places with the version differences but some reading around will sort you out.
It's written in a very Archlinux style and explains the concept fantastically.
Last edited by jack.mitchell (2011-08-12 21:23:40)

Steps for setting up Siebel Collaboration

Hi,
If anyone has integrated Siebel with Microsoft SharePoint, I appreciate if you can please give me some information on where to start and the steps for accomplishing this. I am following the Collaboration Guide on bookshelf, but it looks to me as though there are several gaps between steps.
Please help.
Thanks in advance.

Hello,
The steps for integrating Siebel with Microsoft share point are mentioned in following article.
http://download.microsoft.com/download/9/8/c/98c37b5e-63de-48d3-bd03-2ebd76b94bbe/Integrating_Siebel_CRM_with_SharePoint_Server.pdf
You can also reffer following article for your clearification.
http://hosteddocs.ittoolbox.com/TechNote%2019%20-%20Siebel%20-%20SharePoint%20Integration%20FAQs.pdf
All The Best
Priyanka

HT1694 I have followed the steps for setting up my hotmail account but my ipad, iphone and mac but it keeps saying that either my username or password are incorrect

I dont know what else to do because i know that my password and email address are both correct because i logged in on outlook.com and they worked there
Any suggestions?

I was having the exact same problem until I found this website:
https://www.youtube.com/watch?v=ZOHX1-DUuPY
I followed the steps, and it worked!
Good luck!

Official Document for setting up BOE 3.1 SP3 with AD integration

Hi there,
I just wonder if there is any document that contains steps for setting up BOE3.1 SP3 AD integration on windows 2003 server.
Found this link earlier for the java flavour and would .net implementation be easier for the job...?
http://sboblog.infotrust.dk/index.php/2010/05/21/active-directory-sso-on-sap-businessobjects-xi-3-1/
Thanks.
C.

You would want the white paper in [KB 1476374 - **Best Practices** including Basic and Advanced AD Troubleshooting Steps for Manual Logon, NTLM, Kerberos and Vintela Single Sign On|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/oss_notes_boj/sdn_oss_boj_bip/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7b6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433373336333333373334%7d.do]
it's much more updated than the admin guide.
Regards,
Tim

Best Practice for Setting "parallelism" in RMAN

Can anyone share any wisdom for setting "parallelism" in RMAN? I seem to recall some relationship to the number of processor installed on the server, but I cannot find an authoritative reference.
J

As Werner already indicated, in your case you should set the parallelism to match the number of distinct physical drives in your array. Check Determining Channel Parallelism to Match Hardware Devices. When it come to parallelism, more is not always better. Parallelism can be a trial and error process and once you set the parallelism you should monitor your I/O.

What's the main principle for setting up enterprise structure?

Hi,All
are there any principle for setting up enterprise structure? take for example:different department ,different branch,or different palce?
and how about the relationship between company code and personal area?how about the relationship between them and organizational structure?
Thank u!

Enterprise Structure
To Portray the specific organizational structure of your business in the R/3 System.
To help you portray your company structure, different Accounting, Logistics and Human Resources organization units are provided.

API for setting Access points with PEAP programmatically

Dear Godly developers,
Would like to find out if there is any APIs for setting Access points with PEAP programmatically?
Regards
hAoZ

Thanks for your response. We don't have the Wireless LAN Controller installed and have only configured directly through the AP's, which don't seem to have any configuration changes regarding Aironet IE's. Is there a config change that needs to be made just on the AP's? Or is the Wireless LAN Controller software necessary to make this change?
Thanks again.

HT204053 I have an Apple ID, but when I try to sign in for icloud, from the control panel, it says that I have an Apple ID but I don't have one for icloud. I can't seem to find where I set up the account, even though I've gone thru the steps to "set up" i

I have an Apple ID that I use for itunes. I am trying to set up my icloud account. I have gone thru the steps to "set up" the icloud account. It only has me download the icloud control panel, then I'm supposed to sign into icloud, but then it tells me that I don't have an icloud account. I have looked all over the support area and it doesn't tell me how to get passed this problem. Any suggestions?

http://www.youtube.com/watch?v=gmOmd_WFp6o
This was helpful for getting icloud set up from my pc...but someone said that they had it on their pc and then it disappeared. Fun! Fun! Fun!

Any program for calling bapi from ABAP step by step

any program for calling bapi from ABAP step by step
points will be rewarded,
thank you,
Jagrut BharatKumar Shukla

Hi Jagrut,
BAPI stands for Business API(Application Program Interface).
A BAPI is remotely enabled function module ie it can be invoked from remote programs like standalone JAVA programs, web interface etc..
You can make your function module remotely enabled in attributes of Function module but
A BAPI are standard SAP function modules provided by SAP for remote access. Also they are part of Businees Objest Repository(BOR).
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects. You create business objects and those are then registered in your BOR (Business Object Repository) which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA. in this case u only specify the business object and its method from external system in BAPI there is no direct system call. while RFC are direct system call Some BAPIs provide basic functions and can be used for most SAP business object types. These BAPIs should be implemented the same for all business object types. Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs. Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
The following standardized BAPIs are provided:
Reading instances of SAP business objects
GetList ( ) With the BAPI GetList you can select a range of object key values, for example, company codes and material numbers.
The BAPI GetList() is a class method.
GetDetail() With the BAPI GetDetail() the details of an instance of a business object type are retrieved and returned to the calling program. The instance is identified via its key. The BAPI GetDetail() is an instance method. BAPIs that can create, change or delete instances of a business object type
The following BAPIs of the same object type have to be programmed so that they can be called several times within one transaction. For example, if, after sales order 1 has been created, a second sales order 2 is created in the same transaction, the second BAPI call must not affect the consistency of the sales order 2. After completing the transaction with a COMMIT WORK, both the orders are saved consistently in the database.
Create( ) and CreateFromData! ( )
The BAPIs Create() and CreateFromData() create an instance of an SAP business object type, for example, a purchase order. These BAPIs are class methods.
Change( )
The BAPI Change() changes an existing instance of an SAP business object type, for example, a purchase order. The BAPI Change () is an instance method.
Delete( ) and Undelete( ) The BAPI Delete() deletes an instance of an SAP business object type from the database or sets a deletion flag.
The BAPI Undelete() removes a deletion flag. These BAPIs are instance methods.
Cancel ( ) Unlike the BAPI Delete(), the BAPI Cancel() cancels an instance of a business object type. The instance to be cancelled remains in the database and an additional instance is created and this is the one that is actually canceled. The Cancel() BAPI is an instance method.
Add<subobject> ( ) and Remove<subobject> ( ) The BAPI Add<subobject> adds a subobject to an existing object inst! ance and the BAPI and Remove<subobject> removes a subobject from an object instance. These BAPIs are instance methods.
ex BAPI:
API_SALESORDER_CREATEFROMDAT1
BAPI_SALESORDER_CREATEFROMDAT2
You can get good help form the following links,
BAPI-step by step
http://www.sapgenie.com/abap/bapi/example.htm
list of all bapis
http://www.planetsap.com/LIST_ALL_BAPIs.htm
for BAPI's
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sappoint.com/abap/bapiprg.pdf
http://www.sappoint.com/abap/bapiactx.pdf
http://www.sappoint.com/abap/bapilst.pdf
http://www.sappoint.com/abap/bapiexer.pdf
http://service.sap.com/ale
http://service.sap.com/bapi
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
http://www.planetsap.com/Bapi_main_page.htm
http://www.topxml.com/sap/sap_idoc_xml.asp
http://www.sapdevelopment.co.uk/
http://www.sapdevelopment.co.uk/java/jco/bapi_jco.pdf
Also refer to the following links..
www.sappoint.com/abap/bapiintro.pdf
www.sap-img.com/bapi.htm
www.sap-img.com/abap/bapi-conventions.htm
www.planetsap.com/Bapi_main_page.htm
www.sapgenie.com/abap/bapi/index.htm
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://sap-img.com/bapi.htm
EG::
Here is the step by step procedure for creating BAPIs.
There are 5 different steps in BAPI.
- Create BAPI Structure
- Create BAPI Function Module or API Method.
- Create BAPI object
- Release BAPI Function Module.
- Release BAPI object.
Step1. Creating BAPI Structure:
- Go to <SE11>.
- Select Data Type & Enter a name.
- Click on Create.
- Note: Always BAPI should be in a development class with request number (Not Local Object).
- Select Structure & hit ENTER.
- Enter the fields from your database. Make sure that the first field is the Primary Key Field.
- Then SAVE & ACTIVATE.
Step 2. Creating BAPI module:
- Enter TR.CODE <SE37>.
- Before entering any thing, from the present screen that you are in, select the menu
Goto -> Function Groups -> Create Group.
Enter a name (Note: This name Must start with ZBAPI)
Let this screen be as it is and open another window and there, enter TR.CODE <SE80).
Click on the Third ICON that says Inactive Objects.
Select the group that you just created and click on Activate.
Notice that the group you created will disappear from the list of inactive objects.
- Go back to ><SE37> screen and enter a name and hit <ENTER>. Then enter the group name that you just created and activated.
NOTE: When you release a function module the respective group will be attached to that particular application. It cannot be used for any other application. NEVER include an already existing group that is attached to another module.
Now click on the first Tab that says [ATTRIBUTES] and select the radio button that says remote-enabled module since we will be accessing this from any external system.
Then click on the second tab that says [IMPORT].
Enter a PARAMETER NAME, TYPE and the structure you created in the first step. Also select the check box Pa. All remotely enabled functional modules MUST be Pa enabled, where Pa means Passed by Value and if you dont select Pa, then that means it will be passed by reference..
Then click on tab that says [EXPORT].
Enter the following as is in the first three fields
RETURN TYPE BAPIRETURN (These 3 field values are always same)
Here also select Pa meaning Pass by value.
Note: BAPIRETURN contains structure with message fields.
Then SAVE and ACTIVATE.
Step 3. Creating BAPI object:
- Enter Tr.Code <SWO1> (Note. It is letter O and not Zero).
- Enter a name and then click on create. Enter details.
NOTE: Make sure that that Object Type and Program name are SAME.
- Enter Application M, if you are using standard table Mara. If you are using your own database then select Z at the bottom.
- Then hit <ENTER>.
- Now we have to add Methods. High light METHODS and then select the following from the menu:
Goto Utilities -> API Methods -> Add Methods.
- Enter function Module name and hit <ENTER>.
- Select the second FORWARD ARROW button (>)to go to next step.
- Check if every thing looks ok and again click on FORWARD ARROW button (>).
- Then select YES and click on <SAVE>.
- Now on a different screen goto TR.CODE <SE37>. Enter Function Module name and select from the top menu Function Module -> Release -> Release.
- Goback to TR.CODE <SWO1>.
Here select the menu combination shown below in the same order.
- Edit -> Change Release Status -> Object Type Component -> To Implemented.
- Edit -> Change Release Status -> Object Type Component -> To Released.
- Edit -> Change Release Status -> Object Type -> To Implemented.
- Edit -> Change Release Status -> Object Type -> To Released.
- Then click on <SAVE>.
- Then click on Generate Button (4th button from left hand side looks like spinning wheel).
- Then Click on the button that says PROGRAM to see the source code.
To check if this is present in work flow goto TR.CODE <BAPI>.
Here it shows business object repository.
- First click on the middle button and then select ALL and hit ENTER.
- Goto tab [ALPHABETICAL] and look for the object that you created. This shows that the BAPI object has been created successfully
Reward pts if found usefull :)
regards
Sathish

I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great

I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!

The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works. Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up. Try them again.
Google your particular isp, and ipad and many times you will find the exact settings needed for your isp. Or tell us here, and soneone else may be on the same isp. Some mail services need you to change a port, or have a unique name for the outgoing server.
Kep trying.

My wife and I share an iTunes account. Is there any way to set up a seperate one for her to sync her phone contacts, iCloud and music to without having to purchase all her music again and then share going forward?

My wife and I share an iTunes account. Is there any way to set up a seperate one for her to sync her phone contacts, iCloud and music to without having to purchase all her music again and then share going forward?
It would be so much easier having seperate accounts but we have hundreds of her purchased songs on my account and she would need to be able to access these from her account. Possible?
Also, if we bought a song in future we would want to be able to both have access to it.
Alternatively, what is the easy way to sync two distinctly different contact lists to one iTunes account?
Thank you in advance.

FYI: iTunes account (used to make purchases) is not the same as iTunes library (iTunes on your computer with music, movies, etc.).
ecbclb wrote:
Will we have to create a seperate account for her, or can we all have the same one?
You can but you will not be able to limit what she syncs.
I would like to avoid 'checking' and 'unchecking' individual songs every time one of us tries to synch our ipods to the library.
I don't recommend using (only) the checkmarks to select what to sync.
Each of you can create your own playlists then sync only those playlists.
Then add/delete from your own playlists to change iPod content.
The only time I uncheck items is if I rarely/never want to sync them to anything, such as Christmas music or old audiobooks.
I suggest you each have your own computer login account. Then everyone has their own contacts, calendars, and everything else.
You and your husband can share an iTunes library and let your daughter have her own.

"Blocked plug-in message" problem on my OS X 10.6.8. (Safari's 5.1.10). Any solutions for a non-techie (step 3 on Adobe Flash's instructions leads to dead end). Thanks.

"Blocked plug-in message" problem on my OS X 10.6.8 (Safari's 5.1.10). Any solutions for a non-techie (step 3 on Adobe Flash's instructions leads to dead end, i.e. product for sale). Thank you.

Prior to updating flash player, you must first uninstall all previous versions. Make sure you are downloading from the proper Adobe website = Adobe Flash Player Software
Flash Player Uninstaller
Repair permissions and restart your computer after the installations.

Any steps for Setting up NetTalk on M20

Similar Messages

Maybe you are looking for