Any succesfull install of Forms6i in HTTPS mode ?

Has anybody succecfully installed Forms6i using OAS 4.0.8.0 on solaris in HTTPS mode.
If yes can you please advice on any major issues that you have faced.
We are trying to get this thing running, we have installed the certificates and everythinf runs fine on HTTP mode when using the secure socket the form is not displayed.
Any ideas what might be going wrong ?
Any help will be highly appreciated
Sunil

I have tried calling Oracle support but they do not have a clue. All they could help with was follow the installation instructions as no one has hands on experience of Forms 6i in HTTPS mode.
Cheers
null

Similar Messages

Cannot Install Windows 7 with AHCI mode

Hello,
Having just submitted a support ticket to MSI, I was curious to see if anyone else has experienced a similar issue or may be able to suggest a possible resolution.
I recently purchased a MSI Z87-G41 PC Mate for an htpc build.
I've ran into an issue of not being able to install Windows 7 Ultimate 64 bit onto my ANY SATA 3 hard drive with SATA mode - AHCI enabled in bios.
Main parts for the build are:
Motherboard: MSI Z87-G41 PC Mate
CPU: Intel Core i3-4130 3.4 3 FCLGA 1150
RAM: G.SKILL Ares Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600
PSU: Corsair Builder Series CX 600
OS HD: Crucial M500 SSD
During Windows install and selecting the SSD in which to install windows onto..
Windows will prompt with: “Windows cannot be installed to Disk x Partition x. (Show details)
Afterwards, I’ll select ‘Load driver’ and select the “Intel Rapid Storage Technology Driver for 8x series,” provided by MSI drivers download page. Confirmed as a valid driver for the SATA AHCI controller.
"Select the driver to be installed" lists: “Intel(r) 8 Series/C220 Chipset Family SATA AHCI Controller” Looks good, then progress...
Followed by clicking on next- “Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information.”
I've tried installing Windows 7 Ultimate 64 bit via USB drive and OEM disc to no avail.
Performed a test using the same install procedure with my primary desktop computer which uses a MSI z68A-GD65 (G3) motherboard (AHCI enabled.) I was able to install windows to my Crucial M500 SSD without issue.
Confirmed the issue occurs while testing with different hard drives. I have yet to be able to install windows with AHCI enabled on this motherboard.
HDDs tested include:
WD Black WD5002AALX 500GB
Seagate ST3100524AS 1TB
Once I change SATA mode from AHCI to IDE, I was able to install windows without the need of pre-loading the Intel 8 Series SATA/AHCI driver.
Afterwards having installed windows, I decided to test by switching SATA mode back to AHCI. Doing so will cause the machine to bsod upon booting to windows. Later, I performed the registry edit to change IDE to AHCI mode within windows. Followed by again enabling AHCI in bios.
I was able to boot while in AHCI mode temporarily a couple of times until this method stopped working. Any attempt past the bios post, windows will not boot.
I've also tested the manual and XMP profile RAM settings as suggested by the sticky'd thread here https://forum-en.msi.com/index.php?topic=178019.0
I would like to possibly resolve the issue in regards to utilizing AHCI mode for optimal performance for my hard drives and hot swap capability.
When I have more time, I suppose I can run a RAM test; but so far I simply believe it may just be a SATA controller or driver conflict with the motherboard.
tl;dr Cannot install Windows 7 onto any hard drive with AHCI enabled. Works fine with IDE mode.

** Update as of 6/3/2014 ** Issue resolved.
Received my replacement motherboard from RMA. Replacement is working without any issues with SATA mode set to AHCI.
Tested by running Windows 7 and Windows 8 install - both detected my SATA SSD and other HDDs as applicable drives to install Windows onto. Pre-loading the SATA controller drivers was not necessary. Windows boots up immediately without any delay now. Benchmarks are showing valid stats for SATA3 devices.
Also to note, the replacement motherboard came with bios version 1.5, compared the one I sent back which came with 1.6. In case if that had anything to do with it. Not going to risk updating the bios at this point.
Video of issue:
Benchmarks from the old motherboard on the Crucial M500 SSD taken with Crystal DiskMark
Benchmark from MSI Z87-G41 PC Mate (MS-750)
on SATA 3 port set to AHCI
CrystalDiskMark 3.0.3 x64 (C) 2007-2013 hiyohiyo
Crystal Dew World
* MB/s = 1,000,000 byte/s [SATA/300 = 300,000,000 byte/s]
Sequential Read : 264.792 MB/s
Sequential Write : 143.991 MB/s
Random Read 512KB : 250.614 MB/s
Random Write 512KB : 142.545 MB/s
Random Read 4KB (QD=1) : 24.176 MB/s [ 5902.3 IOPS]
Random Write 4KB (QD=1) : 82.152 MB/s [ 20056.5 IOPS]
Random Read 4KB (QD=32) : 210.018 MB/s [ 51274.0 IOPS]
Random Write 4KB (QD=32) : 134.663 MB/s [ 32876.6 IOPS]
Test : 100 MB [C: 35.4% (39.6/111.8 GB)] (x5)
Date : 2014/05/24 3:25:19
OS : Windows 7 Ultimate SP1 [6.1 Build 7601] (x64)
Benchmark from MSI Z87-G41 PC Mate (MS-750)
on SATA 3 port set to IDE
CrystalDiskMark 3.0.3 x64 (C) 2007-2013 hiyohiyo
Crystal Dew World
* MB/s = 1,000,000 byte/s [SATA/300 = 300,000,000 byte/s]
Sequential Read : 181.472 MB/s
Sequential Write : 141.275 MB/s
Random Read 512KB : 177.430 MB/s
Random Write 512KB : 141.393 MB/s
Random Read 4KB (QD=1) : 21.646 MB/s [ 5284.6 IOPS]
Random Write 4KB (QD=1) : 68.922 MB/s [ 16826.7 IOPS]
Random Read 4KB (QD=32) : 25.411 MB/s [ 6203.9 IOPS]
Random Write 4KB (QD=32) : 108.275 MB/s [ 26434.3 IOPS]
Test : 100 MB [C: 35.4% (39.6/111.8 GB)] (x5)
Date : 2014/05/24 3:41:42
OS : Windows 7 Ultimate SP1 [6.1 Build 7601] (x64)
Benchmark from MSI Z87-G41 PC Mate (MS-750) **Replacement from RMA**
on SATA 3 port set to AHCI
CrystalDiskMark 3.0.3 x64 (C) 2007-2013 hiyohiyo
Crystal Dew World
* MB/s = 1,000,000 byte/s [SATA/300 = 300,000,000 byte/s]
Sequential Read : 469.045 MB/s
Sequential Write : 138.655 MB/s
Random Read 512KB : 419.083 MB/s
Random Write 512KB : 135.032 MB/s
Random Read 4KB (QD=1) : 26.454 MB/s [ 6458.5 IOPS]
Random Write 4KB (QD=1) : 89.189 MB/s [ 21774.7 IOPS]
Random Read 4KB (QD=32) : 252.818 MB/s [ 61723.0 IOPS]
Random Write 4KB (QD=32) : 129.909 MB/s [ 31716.1 IOPS]
Test : 100 MB [C: 37.1% (41.5/111.8 GB)] (x5)
Date : 2013/03/10 10:02:50
OS : Windows 7 Ultimate SP1 [6.1 Build 7601] (x64)

Problem Installing Virtual PC for XP Mode in Win 7 Pro(64) SP1

XP Mode has successfully installed, but Virtual PC has not. Installing Virtual PC requires only a Windows Update, so I downloaded the correct file -- Windows6.1-KB958559-x64-RefreshPkg.msu. When I try to install it I get that this update is already installed
on my computer, but I still don't have Virtual PC.
What now?
Thanks for any guidance that can be offered.
Rob

Installing Virtual PC requires only a Windows Update...
Kinda/sorta.
<QP>
To use Windows XP Mode, you need to download and install Windows XP Mode, and Windows Virtual PC, the program that runs virtual operating systems on your computer.
When you install a program in Windows XP Mode, the program becomes available for use in both Windows XP Mode and Windows 7.
To download and install Windows XP Mode
Go to the Windows XP Mode page in Download Center.
Under Quick Details, select your language.
Click Continue and follow the instructions on the screen to validate your copy of Windows 7.
Select a version of Windows XP Mode to install and click Install.
Note:              Windows XPMode_N versions don't include Windows Media Player.
Click Run in your browser's message bar, and follow the instructions on the screen.
When setup is completed, click Finish.
To download and install Windows Virtual PC
Go to the Windows Virtual PC page in Download Center
Under Quick Details, select your language.
Click Continue and follow the instructions on the screen to validate your copy of Windows 7.
Select a version of Windows Virtual PC to install and click Install.
Note: The x64 version works with 64-bit versions of Windows 7. The x86 version works with 32-bit versions of Windows 7. To find out if your PC is running 32- or 64-bit Windows 7, click the
Start button , right-click
Computer, and then click Properties. 32-bit and 64-bit information appears next to
System type.
Click Run in your browser's message bar, and follow the instructions on the screen.
Click Yes to install Update for Windows (KB958559).
If you accept the license terms, click I Accept.
After installation is complete, click Restart Now to restart your computer.
To set up Windows XP Mode for first use
Click the Start button , click
All Programs, click Windows Virtual PC, and then click
Windows XP Mode.
<figure class="embedObject"><figcaption class="caption">
Windows Virtual PC and Windows XP in the list of programs         </figcaption></figure>
If you accept the license terms, click I accept the license terms, and then click
Next.
On the Installation folder and credentials page, accept the default location where Windows XP Mode files will be stored, or choose a new location.
Type a password, type it again to confirm it, and then click Next.
On the Help protect your computer page, decide whether you want to help protect your computer by turning on automatic updates, and then click
Next.
Click Start Setup.
After setup is complete, Windows XP Mode opens in a separate window.
</QP>
Source & more:
http://windows.microsoft.com/en-us/windows7/install-and-use-windows-xp-mode-in-windows-7
~Robear Dyer (PA Bear) MS MVP-Windows Client since 2002 Disclaimer: MS MVPs neither represent nor work for Microsoft

JInititiator 1.3.1.22 and Internet Explorer 7.0 in HTTPS Mode Not Working

Anyone else having problems running Jinitiator 1.3.1.22 in Internet Explorer 7.0 in HTTPS mode? I'm getting the usual unhelpful java.lang.ClassNotFoundException:oracle.forms.engine.Main error.
Works okay in HTTP mode. Confirmed that JInititiator and the certdb.txt file were okay by connecting successfully with IE 6.0 in HTTPS.

Thank you for a very informative response.
I installed 1.3.1.26 and get the same error when trying to connect to Forms in HTTPS mode.
I also verified I can download the frmall.jar file directly from the server.
Here's what I found in the OHS access log:
192.168.1.1 - - [14/Nov/2006:16:01:55 -0600] "GET /forms/lservlet HTTP/1.1" 200 223
192.168.1.1 - - [14/Nov/2006:16:02:04 -0600] "GET /forms/frmservlet?ok=OK+to+continue HTTP/1.1" 200 3931
192.168.1.1 - - [14/Nov/2006:16:02:04 -0600] "GET /forms/java/frmall_jinit.jar HTTP/1.1" 200 1188684
192.168.1.1 - - [14/Nov/2006:16:02:29 -0600] "GET /forms/java/java/awt/KeyboardFocusManager.class HTTP/1.1" 404 381
192.168.1.1 - - [14/Nov/2006:16:02:29 -0600] "GET /forms/java/java/awt/KeyboardFocusManager.class HTTP/1.1" 404 381
192.168.1.1 - - [14/Nov/2006:16:02:30 -0600] "GET /forms/java/java/awt/event/MouseWheelListener.class HTTP/1.1" 404 385
192.168.1.1 - - [14/Nov/2006:16:02:30 -0600] "GET /forms/java/java/awt/event/MouseWheelListener.class HTTP/1.1" 404 385
192.168.1.1 - - [14/Nov/2006:16:02:30 -0600] "GET /forms/java/oracle/forms/registry/Registry.dat HTTP/1.1" 200 4216
192.168.1.1 - - [14/Nov/2006:16:02:30 -0600] "GET /forms/java/oracle/forms/registry/default.dat HTTP/1.1" 404 379
Here's the corresponding entries from the OHS error log:
[Tue Nov 14 16:02:29 2006] [error] [client 192.168.1.1] [ecid: 4760584573966,1] File does not exist: c:/oracle/mid1012/forms/java/java/awt/KeyboardFocusManager.class
[Tue Nov 14 16:02:29 2006] [error] [client 192.168.1.1] [ecid: 4777764443166,1] File does not exist: c:/oracle/mid1012/forms/java/java/awt/KeyboardFocusManager.class
[Tue Nov 14 16:02:30 2006] [error] [client 192.168.1.1] [ecid: 4760584573982,1] File does not exist: c:/oracle/mid1012/forms/java/java/awt/event/MouseWheelListener.class
[Tue Nov 14 16:02:30 2006] [error] [client 192.168.1.1] [ecid: 4794944313801,1] File does not exist: c:/oracle/mid1012/forms/java/java/awt/event/MouseWheelListener.class
[Tue Nov 14 16:02:30 2006] [error] [client 192.168.1.1] [ecid: 4812124183473,1] File does not exist: c:/oracle/mid1012/forms/java/oracle/forms/registry/default.dat
Again, I can connect via HTTP mode. This only occurs when connecting via HTTPS.
Unfortunately, our customers must use HTTPS mode and I fear they will be forced to upgrade to IE7 within the next month.
Any suggestions you may have are most welcome. Thanks again for your quick response.
Jim

Problem installing Analysis Services in Tabular Mode

I am trying to install Analysis Services in Tabular mode to a server where I have already installed Analysis services in Powerpivot mode and in regular mode. I am following the instructions below and when I get to the screen below the tabular mode
option is greyed out. What do I need to do?
http://blog.quasarinc.com/ssas/installing-sql-server-2012-analysis-services-tabular-mode/

Hi Racand,
Which editions of SQL Server 2012 you are using? The Tabular option is only available for Enterprise and Business Intelligence editions. Please refer to the link below to see the details.
Features Supported by the Editions of SQL Server 2012
If you have any questions, please point it out.
Regards,
Charlie Liao
TechNet Community Support

FRM-92050 error when trying to open form after switching to HTTP mode

Hi all,
Yesterday, I installed Oracle Applications 11i on Red Hat Enterprise Linux ES 4 and forms were working correctly in the default mode, which is native (socket). Following steps 4 and 5 in [Doc 201340.1|https://metalink2.oracle.com/metalink/plsql/f?p=130:14:6398415066875997204::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,201340.1,1,1,1,helvetica], I enabled HTTP mode, and now my forms are not working. When I open a form now, I get this error:
FRM-92050: Failed to connect to the Server: /forms/formservlet:-1
Details...
Java Exception:
java.io.IOException: Negative content-length from http://...
I've searched MetaLink and the forums for this error and all the results I found deal with HTTP headers or cookies being corrupted, usually by an intermediate networking device (web proxy, web cache, SSL accelerator, etc.). I am not using anything of the sort - the client is connecting directly to the Oracle server.
I checked the Apache error log and this is what I see:
[Thu May 14 09:10:28 2009] [error] [client 10.11.1.114] client denied by server configuration: /work/oracle/viscomn/java/java
[Thu May 14 09:10:28 2009] [error] [client 10.11.1.114] client denied by server configuration: /work/oracle/viscomn/java/java
[Thu May 14 09:10:33 2009] [error] [client 10.11.1.114] File does not exist: /work/oracle/viscomn/java/oracle/forms/icons/oracle_logo_light.gif
[Thu May 14 09:10:33 2009] [error] [client 10.11.1.114] File does not exist: /work/oracle/viscomn/java/oracle/forms/icons/oracle_logo_light.gif
[Thu May 14 09:10:34 2009] [error] [client 10.11.1.114] File does not exist: /work/oracle/viscomn/portal/VIS_gen1-cs49/forms/formservlet
[Thu May 14 09:10:34 2009] [error] [client 10.11.1.114] client denied by server configuration: /work/oracle/viscomn/java/oracle/ewt
[Thu May 14 09:10:34 2009] [error] [client 10.11.1.114] client denied by server configuration: /work/oracle/viscomn/java/oracle/ewt
[Thu May 14 09:10:34 2009] [error] [client 10.11.1.114] File does not exist: /work/oracle/viscomn/java/oracle/ewt/alert/resource/AlertBundle_en_US.properties
I don't like the look of those "client denied by server configuration" messages. What's also odd is that the two files referenced by those messages do not exist on the file system:
[oracle@gen1-cs49 logs]$ cat /work/oracle/viscomn/java/java
cat: /work/oracle/viscomn/java/java: No such file or directory
[oracle@gen1-cs49 logs]$ cat /work/oracle/viscomn/java/oracle/ewt
cat: /work/oracle/viscomn/java/oracle/ewt: No such file or directory
Any ideas? Are there any other logfiles I should be checking?

First, login to System Administrator responsibility, then navigate to Concurrent > Manager > Administer > Processes > Internal Manager LogAh, OK - I was able to open the form and I see a table of managers and services and whatnot, and I see an entry for "Internal Manager", but I don't see any way to view the log. I even tried opening the details of the "Internal Manager" entry and the only button there is "Diagnostics".
Search for VIS_*.mgr -- Sorry for the typo!Ah, that would explain it. Here are the contents of the correct logfile:
[oracle@gen1-cs49 VIS_gen1-cs49]$ cat VIS_0514.mgr
========================================================================
Starting VIS_0514@VIS Internal Concurrent Manager -- shell process ID 4314
logfile=/work/oracle/viscomn/admin/log/VIS_gen1-cs49/VIS_0514.mgr
PRINTER=noprint
mailto=oracle
restart=N
diag=N
sleep=60 (default)
pmon=20 (default)
quesiz=1 (default)
Routine &ROUTINE has attempted to start the internal concurrent manager. The ICM is already running. Contact you system administrator for further assistance.afpdlrq received an unsuccessful result from PL/SQL procedure or function FND_DCP.Request_Session_Lock.
Routine FND_DCP.REQUEST_SESSION_LOCK received a result code of 1 from the call to DBMS_LOCK.Request.
Possible DBMS_LOCK.Request resultCall to establish_icm failed
The Internal Concurrent Manager has encountered an error.
Review concurrent manager log file for more detailed information. : 14-MAY-2009 11:06:48 -
Shutting down Internal Concurrent Manager : 14-MAY-2009 11:06:48
List of errors encountered:
_ 1 _
Routine AFPCSQ encountered an ORACLE error. .
Review your error messages for the cause of the error. (=<POINTER>)
List of errors encountered:
_ 1 _
Routine AFPCAL received failure code while parsing or running your
concurrent program CPMGR
Review your concurrent request log file for more detailed information.
Make sure you are passing arguments in the correct format.
The VIS_0514@VIS internal concurrent manager has terminated with status 1 - giving up.

Is there any PL/SQL interface in Forms10g Debug mode?

Dear gurus...
Since I've been debuuging Forms-10g, I've been looking for a SQL-PL/SQL interface like it was there in Forms-6i. It was very useful to have a look into database while debugging a form and test yours queries at runtime. So do u know that Is there any PL/SQL interface in Forms10g Debug mode?

Hello Suresh,
I think you could try to use new Oracle tool - Oracle SQL Developer v 1. It has PL/SQL reporting possibility, such as - Program Unit Components, Unit Line Counts, Search Source Code.
It is quite easy to develop and debug PL/SQL in JDeveloper environment, just review this tutorial: http://www.oracle.com/technology/obe/obe9051jdev/ide1012/plsqlobe/obeplsql.htm
If you need in depth analysis, you could use Oracle Enterprise Manager (installed with database) tuning services available through - Advisor Central. This is a user-friendly front-end for database dynamic views.
Regards,
Andrejus

13 in macbook pro (early to mid 2011) : after the update, computer freezes with spinning wheel every 30 seconds first with safari and now with all the applications. I don't have any programs installed and still had good enough memory on the RAM.

After the update of my 13 in mac book pro (early to mid 2011) , it freezes every 30 seconds with the spinning wheel and now it just freezes. Ive never had this problem until I recently updated. Also, I just checked now for available update ( which there was one), the update would process till the last step and it shows it cannot be expanded? Now my computer wont even restart (just have a grey screen with a cursor). Can someone please tell me what the heck is going on with my computer?
I also checked the memory and it showed available memory was over 1.5 GB. I dont have any programms installed and do not have backup yet ( dont really need it anyways)
Problems: first with spinning wheel every 30 seconds and now whole computer just freezes when I restart, it only shows grey screen after the starting sound or it takes about 8 to 10 minutes to restart.
This ALL happened right after the update with google chrome crashing. I know my apple care plan expired so I cant even go to genius bar. Do you guys know how much it would cost to get it fixed ? Or any recommendations I can do to fix this?

Try a smc reset:
http://support.apple.com/kb/HT3964

How to set up Group Policy without any server installed

How to set up Group Policy on Win8 without any server installed?
I have set up 50 users on LAN and want to push softwares via one common point. From google I found to deploy Software using Group Policy. But then Group Policy occurs in Servers and I don't have any server set up.

Hello,
a Domain requires at least one Windows server OS machine which has Active Directory installed.
As previous already mentioned from SenneVL this also requires that computers are added to the domain and that you create user accounts in Active Directory users and computers which stores the account information in the Active directory database.
In your case with single computers each machine has its own database(SAM) which stores passwords etc. this is different in a domain.
Each computer has a local policy which will be overwritten from centrally managed policies from the domain.
"The common point would be my PC (Admin PC) ."
This machine can not be used for your needs with software installation for 50 computers.
"How To Use the Group Policy Editor to Manage Local Computer Policy."
This is about the local machine and you cannot manage them for other computers from your Admin PC.
"DOMAIN part: By default Microsoft takes everyone on Workgroup. Is that not a default DOMAIN? or should I make one lets say "ABC" on every PC ?"
NO, this is NOT a domain.
http://windows.microsoft.com/en-us/windows7/what-is-the-difference-between-a-domain-a-workgroup-and-a-homegroup
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Why is my Creative Cloud desktop app telling me I don't have any apps installed, when in fact I do?

Just noticed this forum so thought I'd post my question in here too...
So, I [think] I just downloaded the latest CC desktop app/manager and when it finished etc and opened up, it's now telling me that I don't have any apps installed. I do, I have PS, AI, InDesign etc etc etc.
Why is the new desktop app wrong all of a sudden? Why isn't it recognising what apps I have downloaded on my computer?
I've just installed PS 2014, expecting it to tell me 'you've already got this on your computer' but it didn't, I just carried on with the install as if I didn't already have it [it doesn't appear to of doubled up]...why isn't it 'synced', what am I missing?
Thanks in advance

uninstall your cc desktop app, clean and reinstall per, http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
or contact adobe support via chat/'contact us', Contact Customer Care

Forms 6i not working in HTTPS mode

We have installed OAS 4.0.8.0
We have downloaded the required certificates and installed them using the default Oracle documentation.
We cannot display a form using the secure port (8881).
Everything thing work with only the HTTP mode.
Can anybody help please.
null

Assuming you connected to the running form successfully, it sounds like your breakpoint is not being called. In other words, if you put a breakpoint in a trigger that isn't firing then the break will never occur. A simple test would be to add a break in the WHEN-NEW-FORM-INSTANCE trigger. Since this trigger cannot be avoided, control will quickly be passed to the debugger at startup. If this works then you can assume what I mentioned, which is that your other breakpoints are not being reached.
Just to be sure, I just tested the Debugger in Forms 11.1.2.1 on Windows and it appears to work correctly.

Has any one installed utl_dbws in 9.2.0.4

has any one installed utl_dbws in 9.2.0.4 with jdk 1.3
If so, how did you do it?
I get a run time error oracle/jpub/runtime/dbws/DbwsProxy could not be resolved
when i manually try to resolve it i track it down to a missing class
ORA-29521: referenced name java/util/logging/Level could not be
found
this class java/util/logging/Level does not apper in the javavm until 10.2 or possibly 10.1.
I have 9.2.0.4 database and jdk 1.3.
also I used -genmissing with the loadjava script and i still have the same problem.
I thought -genmissing was supposed to put a place holder in for missing classes,
but it did not.
Thanks for any help
jim

the message looks very much like the one posted at http://asktom.oracle.com/pls/ask/f?p=4950:8:5812357525663697256::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:16568950771220
b.t.w. i don't think that any packages are missing. it seems that the XML is invalid. Did you use dbms_output commands to show the generated XML?

Problem to install 5.5 in graphic mode

Hi,
on my X86/64-system I had already successfully unbreakable oracle enterprise linux version 4.8 in graphic mode.
But I tried since some days to install version 5.4 or 5.5. The system hanged or showed only a quadrat.
Any help?
Thank in advance
hqt200475

If you're the hacker type, then you can install OEL5, and via console mode install the latest proprietary nVidia driver for Linux (need to download and copy it onto the server first). This taints the kernel - but in my experience, the kernel drivers from nVidia are fairly robust and works well. The nVidia installer is also pretty seamless. Cannot recall ever having a problem with the installation. You may however need the kernel header source installed. But having that installed should be standard on servers in order to install kernel modules and drivers.

Installing in Firewire Target Disk mode

I know this is a kind of silly question, but is it advisable to install OS X on my iMac when it's booted into Firewire Target disk mode? I mean, would it get funky stuff in there that the iMac doesn't need if i install from, say, my PowerMac? I know it's quite possible to do this, as I used to do it when I had two identical iMacs. But those were, of course, identical, so the target machine had the same specs as the one that was installing.
Any thoughts?
Oh, and let me say a quick "hi" to all the regulars. I haven't really been on this baord too much the past year or so. Who's still around?

Hi, Trey.
I installed Tiger via Target Disk Mode, but my G3 has been having kernel panics in the couple weeks since the upgrade. On another post someone said that they'd heard that the Target Disc Mode can be a problem. So I'm checking the posts to find out more.
My G3 has a CD-R/W drive, so I didn't have an alternative, other than to buy an external drive, or to send Apple my commercial Tiger DVDs and pay them MORE to convert it to CDs. I just paid big bucks for the G5 a month before they came out with a cheaper upgraded version, which I am unhappy about. Of course those Tiger disks are for G5 ONLY, so I couldn't install to my G3 from them, so I coughed up the cash for the DVDs. I couldn't fathom giving them even more for a CD transfer.
Of course, if the G3 keeps crashing, and I hear from others that a direct install from CD may cure the problem, what choice will I have? As much as I've loved Apple over the years, there's starting to be a more corporate (and dare I say it, Gates-like) vibe from their method of doing business. Now the kid wants an iPod for Christmas, and I have to check those boards to see how they're performing. As helpful and fun as all this technology is, it is also quite stress-inducing...
Good luck with your upgrade! --kat
iMac G5 20" (ALS); 2G RAM | iMac G3 500MHz slot-load CD-R/W CRT; 1G RAM Mac OS X (10.4.3) Using Apple since IIe, and Macs since 1984
iMac G5 20" (ALS); 2G RAM | iMac G3 500MHz; slot-load CD-RW; 1G RAM Mac OS X (10.4.3) Using Apple since IIe, and Macs since 1984

How can I install photoshop cc on demo mode that was accicedentally uninstalled?

How can I install photoshop cc on demo mode that was accicedentally uninstalled?. When I try do do it, on adobe creative cloud appears as installed and there is no way to eliminate. Thank you.

Hi Ernesto Quino,
Puedes ingresar en www.creative.adobe.com e iniciar sesión con su ID de Adobe y haga clic en la pestaña 'Descargar'.
Usted encontrará la opción para descargar Photoshop CC.
gracias
Kapil

Any succesfull install of Forms6i in HTTPS mode ?

Similar Messages

Maybe you are looking for