Any suggested patches for CF9 communicating with SHA2

Hi. We are still running CF9 and have noticed that HTTPS calls to web services using the newer SHA2 algorithm fail. It appears that CF9 cannot support SHA2. Does anyone have a suggested patch for this issue. Obviously we need to upgrade to CF11, but that will take a couple weeks. Looking for an immediate work-around. We have two installations of CF9 - one enterprise and one standard edition. Any ideas?

Similar Messages

How to use Crossbow Xmesh WSN LabVIEW drivers for downstream communication with motes

Hello,
I am trying to use LabVIEW Crossbow Xmesh WSN driver for downstreaming commands but driver programs are not working.
I am interested in changing node (Iris mote with MDA300 board) update rate from LabVIEW program running on host PC .
I have used Set node update rate.vi with open stream.vi and start stream.vi in proper sequence and developed a program to change node update rate. When program is run no error is shown but node update rate is not changed.
Pl suggest what I should I do.
What is the function of WSN write VIs (WSN write Raw 1sensor1point). For what type of message this is used.
I want to actuate relay on MDA300 with mote id 2. What VIs (from driver ) I have to use and how to issue command related to it.
Incase any one can help I will be grateful
Roop

Hi Arjun,
I am sending you snap shot of VI developed to change node update rate.and also the heirarchy of drivers VIs used in the program for better understanding .
In case you can figure out why the command message send is unable to communicate with mote .
Also for downstream communication with motes the packet format used is described in Moteworks user manual from MiMSic.com
I think the developer of these drivers can help you out in solving my problem.
Thanks
Roop
Attachments:
sreenshot to arjun ni for checking downstream comm.doc ‏288 KB

Setup crypto for secure communication with other switches

What kind of code can be used to setup crypto for secure communication with other switches.

ok but is there any special code i need to write if i need to create a crypto secure communication between some particular switches.

Any Specific patches for General Ledger on Release 12.1.3

All -
I came to know we can migrate oracle apps *12.1.1 to 12.1.3* by implementing update pack - (*Patch 9239090*)
But are there any specific patches for General Ledger Module on release *12.1.3*
Please advise on this
Regards
VSH

I came to know we can migrate oracle apps *12.1.1 to 12.1.3* by implementing update pack - (*Patch 9239090*)
But are there any specific patches for General Ledger Module on release *12.1.3*
Please advise on thisPlease see the docs under the "2. Recommended Patching" section in (EBS R12 Period Close Advisor: General Ledger [ID 1359476.1]).
Also, please the docs referenced in these docs.
Planning Your Oracle E-Business Suite Upgrade from Release 11i to Release 12.1 [ID 987516.1]
E-Business Suite: Oracle Financial Control Information Center [ID 1207527.1] -- GENERAL LEDGER
Oracle Applications Current Patchset Comparison Utility - patchsets.sh [ID 139684.1]
My Oracle Support > Patches & Updates > Recommended/Latest R12 Patches
Thanks,
Hussein

Bought a new 64 GB 4S version, but "About" shows only 13,6 GB. Any suggestions except for hardware fault ??

Bought a new 64 GB 4S version, but "About" shows only 13,6 GB.
Any suggestions except for hardware fault ??

Bought a new 64 GB 4S version, but "About" shows only 13,6 GB.
Any suggestions except for hardware fault ??

Any suggestions Bluetooth for motor bike use

Any suggestions Bluetooth audio for motor bike use

http://en.wikipedia.org/wiki/List_of_mobile_network_operators_of_Europe#Spain
In choosing an operator and plan ask about roaming rates and what the costs are. Better still In Settings\\Cellular Data (appears when Caarrier is switched On) Keep roaming Off to avoid charges when out of range of your chosen network operator. Most PAYG operators can offer travel plans for set data usage - but check topup pricings and how to pay. Watch for hidden charges if using an intermediary - they may charge you service, commission and or currency exchange charges if doing the transaction for you. Having a direct dial number back to the UK within the same network may help keep costs down for international connections.
If holidaying at a hotel check with your travel operator who may have local knowledge of free wifi hotspots etc.
http://www.europa.uk.com/cgi-bin/ni_map_jpkd.pl?cust=jpkd_&cc=es&net=ai&opts=4
The link above was gained from tapping in <Spain v Network Coverage Map> its not a preference or a recommendation. A little research on your part is going to be called for, particularly if in the more mountainess areas.
1gig per day of data should give you plenty of flexibility. Watch out for unsecured networks on the continent - internet fraud is far higher abroad in Europe than it is in the UK. Also a good idea to passcode and code your Settings\Restrictions pages too with find my ipad enabled as a bit of extra comfort should the worst happen.
Spain is pretty censor free by comparison with many Euro countries, so moderate settings for content may give ou a higher level of explicitness than intended if your kids are browsing unsupervised.
Hope this helps you, Regards, Ct

Is there any trade in for ipad 3 with ipad 4

Can i know is there any trade-in available in SWITCH centre for ipad 3 with ipad 4 .. How much should i top up for it ?

No. Apple doesn't do trade ins.
They do have a recycle program which will offer you something for it but you can probably do better selling it on your own.
Allan

Any suggestions (luck) for a Mac/Sonos compatible NAS drive?

Any suggestions (luck?) fpr a Mac/SONOS compatible NAS drive?

I recommend Mac OS 7.6.1 on 68030 Macs. I have a Performa 405 that used to have a Revision B LC II logic board. I ran Mac OS 7.6.1 on that Mac right up until the logic board failed on me. It has since been upgraded to a LC III+ logic board. The Mac Color Classic or Mac Color Classic II are essentially all-in-one versions of the LC II & LC III+. The logic board specs are identical too except that the LC III+ is capable of running at higher resolutions than the Color Classic II due to the built in monitor it uses. You can also run System 6.0.8L if you have the original Color Classic. This is documented in 6.0.8L's Readme file too. Some games like Sierra On-Line's adventure games may run better in System 6 due to compatibility issues related to Mac OS 7.5.X. I know this because several of my adventure games have required patching/tweaking to make them run right (a Pre-Y2K date issue related to Mac OS 7.5.X's clock function).

Suggestion - App for older Lumias with WP 7.8

Well i like the clarity of playback on this phones (above average) but it would be nice to have an app for lets say only Tone control (Bass, Treble) to better manipulate with the sound. Many random headphones dont reproduce bass very well, and I guess this would help a lot of users to enjoy their music more. EQ would be nice too, but EO in global destroys the overall sound quality, and is a bit more complicated. I think and easy Treble/Bass correction app would be great if thats possible. And you still could make it Nokia Exclusive :-)

no worries mate . well here's how it goes: If you have an unbranded phone, then it is not tied to a network carrier. there are two types of unbranded phone, either a generic regional one, or a Country Variant one. in the case of a generic regional one, e,g. Australia, Nokia will provide the update to those devices. if the device is a Country Variant, then Nokia will provide the update to the local branch of the Nokia, and it is up to say Nokia Australia to APPROVE and release the update with their own customisations (certain apps, country regulations and law settings for things such as camera shutter sounds etc).
if your phone is a branded variant, then Nokia provides the update to the network carrier, and it is up to the network carrier to APPROVE the update or not, with their own custom wallpapers and random shishkebab that they choose to add.
Obviously in both cases, the local Nokia can say they don't want to approve the update, or the network carrier can say that they don't want to provide the update. This has been the case for many years with a lot of devices, not just Nokia's.
However, with the WP 7.8 and WP8 updates, and WP 7.5 before it, it appears Microsoft and its partners such as Nokia have been a lot stricter on network carriers and local branches, for them to actually approve the update and release it to customers. That is why on the announcement of the availability today of the WP 7.8 update, Nokia has stated that it should be available to everyone within three weeks, through both generic and network carrier variants.

Need API for Java communicating with RS232

Dear All,
I am a newbie to Java. I have a sensor connected to a microcontroller, and this microcontroller is also connected to a PC through the RS232 (COM 1). I have installed the Java Communications API "Javax.comm" on my PC and was able to run the "BlackBox" sample program. What I require is a simple Java program that will read and show the bytes comming through the COM1 port. If anyone has done anything similar or has an idea of how to go about it, could they please send me some example code, I would be very grateful. Or if anyone knows about any website with such similar examples i would be very grateful.
Thank you very much.
FREDERIC

Cross posted numerous times...
http://forum.java.sun.com/thread.jspa?threadID=634826

Patches for Solaris 9 with incompatible Packages

I have a Sun Sparc machine with Solaris 9 on it as oracle server. We added two patches (112233-11: SunOS 5.9:Kernel Patch and 111722-04: SunOS 5.9:MathLibrary(libm)patch). When I prepared the server for Oracle installation, I checked patch with command: $/usr/sbin/patchadd -p | grep <patch_number>. Then UNIX told me that these two patches have incompatible packages. 112233 got 12 incompatible packages and 111722 got 3 incompatible patches. My question is: does this incompatible packages affect Solaris 9 operation on the Sparc machine? How serious will it be? Thanks.

The syntax of ldapclient changed in Solaris 9 (at least by 9 12/03). You now specify it like this:
# ldapclient -v init -a profileName=cn=myProfile,ou=profile,dc=example,dc=comIf you're using Proxy Authentication add the following:
-a proxyDN=cn=proxyagent,ou=profile,dc=example,dc=com -a proxyPassword=ClearTextPWYou should have been able to create a profile (storing it in the DIT) when you ran idsconfig. If you took the default name of "default" (cn=default,ou=profile,dc=example,dc=com) you might not even have to specify the profile name to ldapclient.
To generate a new profile and store it in the DIT use:
$ ldapclient -vgenprofile -a profileName=cn=myProfile,ou=profile,dc=example,dc=com -a defaultSearchBase=dc=example,dc=com ...With your various attributes for your profile as specified in ldapclient(1M).
As for pam, you have to decide which you're going to use: pam_unix or pam_ldap. Note that the Solaris pam_ldap is very different from the PADL pam_ldap used under Linux and elsewhere (this makes it easy to find apparently conflicting advice).

Suggested concept for Grid Control with DataGuard solution

Hello,
I want a Disaster Recovery solution for OEM Grid Control with DataGuard but with only one OMS running. (11.1)
I have figured out the following.
Installation OEM Grid control om host A. Repository is created on Host A. Connection to database is done thru servicename DBGRDSRV on Host A
Installation OEM Grid control om host B. Repository is created on Host B. Connection to database is done thru servicename DBGRDSRV on Host B
I stop OMS on host B and I drop the database on Host B
Then....
I create a Dataguard configuration for DBGRDSRV, the prim database run on Host A en secondary on Host B
In case of a failure i switch the database. On host B i will have DBGRDSRV as the primary database
I start OMS on host B and the agent.
In case the failure is resolved i switch back eveything
Will thos concept work?
Do i get some troubles with the emkey, and if so, does anybody has a solution for this?
Any help is appreciated
Regards,
Jaap
Edited by: user9956284 on 28-jul-2011 10:44

Hi,
Please follow the document provided below:
How to Configure the OMS Connect String when Repository is in a Dataguard setup (Doc ID 1328768.1)
Let me know, if you are looking for the same document.
Best Regards,
Venkat

My iPhone 4s will not connect with my home WiFi network. I have ios6 on my phone. I have updated my IMac and my MacBook Pro with iOS 10.8.2. Anyone have any suggestions? It was connecting with no problems prior to updating my two computers.

My iPhone 4s will not connect with my home WiFi network. I have ios6 on my iPhone. The connection was working perfectly before I updated my IMac and my MacBook Pro to ios 10.8.2. I have had ios6 since I purchased the phone a couple of months ago. It searches for a network and finds them, but when it asks for my password, it will not accept the password. Have never had this happen before.

Hello krosebear,
Thank you for using Apple Support Communities.
If you are having difficulties connecting your iPhone to a Wi-Fi network, the following article should provide troubleshooting that should help you resolve the issue.
If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
Regards,
Jeff D.

Any best practice for Key Management with Oracle Obfuscation?

Hi,
I was wondering if anyone is aware if there are any best practices regarding key management when using Oracle's DBMS_OBFUSCATION_TOOLKIT? I'm particularly interested in how we can protect the encryption/decryption key that we would use.
Thanks,
Jim

Oracle offers this document, which includes a strategy for what you're after:
http://download-west.oracle.com/docs/cd/B13789_01/network.101/b10773/apdvncrp.htm#1006234
-Chuck

Software and Interface card required for DNP3 communication with a protection relay?

I am looking to build a SCADA Master to perform DNP3 communication between the Master and an Outstation device. I would like to know apart from the Ni - Industrial comm software is there any other Interface card I require to accomplish this task?

According to this article, that’s all you need. Just make sure you run applications as an administrator and that you don’t have any type of network restrictions. Since you have it installed, I encourage you to test the functionality/connectivity through the shipping examples, which are located on your hard disc at ...LabVIEW XXX\examples\DNP3 folder (also visible at the NI Example Finder). You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.
Alejandro | Academic Program Engineer | National Instruments

Any suggested patches for CF9 communicating with SHA2

Similar Messages

Maybe you are looking for