Any suggestion​s on creating a new user account please? (thinpad x61 tablet, Vista Business edition)

I would appreciate any suggestions on creating/editing the user account on my second-hand thinkpad X61 tablet (running Vista Business) edition. I bought the laptop from ebay in Germany/Austria. When I switched it on, there were no options to create or edit a username. I have completed all the updates (Lenavo and Windows). I tried the following to add a new administrative account:
1, Control Panel then selecting User Accounts. A screen appears for a second and then disappears. 
2. I have also tried typing in sysdm.cpl in the command prompt, 
None of the above worked, as the screen does not appear at all. I have also tried allowing the automatic updates on, that does not work either. I was wondering if this is managed by the Think Vantage system. Not sure if this is relevant, the Vista Business language was set in German and I added a language pack via Vistalizator to turn it into English.
Any help with this issue would be appreciated. Many thanks in advance.

Hello,
Have you tried running the Local Users and Groups Manager (filename: LUSRMGR.MSC) to create a new user?  If so, were you able to create additional accounts through it?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
  Deutsche Community   Comunidad en Español Русскоязычное Сообщество

Similar Messages

  • Creating a new user account and transferring files from old account

    I am now having more problems than I can handle with my Leopard installation...problems such as applications that refuse quit no matter what ~ even after attempting force quit them and/or attempting to "sudo kill -9 PID", and now that I am having problems with Adobe Lightroom not even being able to remain open on my user account for more than 10 seconds max before it crashes without provocation (yet runs fine on a troubleshooting account I created on the same machine), I would now like to create a new user account on my MacPro Leopard 10.5.6 and transfer my files from the previous (problematic) user account, but I've never done so in the past...
    Can someone give me a basic rundown of how to go about doing this as a means of troubleshooting my current sickly user account (and if you could also please let me know which files I should avoid restoring to the newly created user account so that I don't screw that one up as well, I would appreciate it)
    Any suggestions would be greatly appreciated... Thanks!

    While logged into the troubleshooting account (assuming that it's an admin account—if not create a new one and log into it), backup the bad account's folder, delete the bad account, selecting the save data option (which is stored in /Users/Deleted Users/ as a disk image), recreate the bad account using the same username/password combo, log out and back into the recreated original account. If the problem's solved, open the saved data dmg file in /Users/Deleted Users/, open the /Library/Preferences/ folder from the saved data, open the current /Users/restored account/Library/Preferences/ folder, and slowly copy plist files from the saved data folder to the current one that don't exist in it. Log out and back in to ensure there's no conflict and things still work correctly. Resolving conflicts or identifying corrupt plist files is a laborious process. Good luck.
    See http://discussions.apple.com/thread.jspa?messageID=4703015 for more details on this process.

  • I have recently transferred data from my old PC to my new Mac Book Pro (Mavericks OS). Each transfer creates a new User account (titled 'Owner', 'Owner 1', etc).  I want to merge the files from these transfers into my main user account.  Help?

    I have recently transferred data from my old PC to my new Mac Book Pro (Mavericks OS). Each transfer creates a new User account (titled 'Owner', 'Owner 1', etc).  I want to merge / consolidate the files from these newly created User accounts into my main user account.  Is there a tutorial for this process, or any tips?  Anyone? 

    Four transfers.  After the initial attempt with Migration Assistant failed (after hours and hours of wifi transfer) I did "mini-transfers" of more manageable, smaller bits of files -- my music in one, photos in another, etc.  Since posting my question in this forum, i contacted Apple support, chatted with Angela, and she suggested getting an ethernet-USB adapter for my mac, connecting my external drive with ethernet and transferring files manually -- that is, NOT using the Migration Assistant at all.  She sent me this link to help:  Switch Basics: Migrate your Windows files to your Mac.  I appreciate your response, tho', Csound1! 

  • I can not create a new user account on eprint

    i can not create a new user account on eprint. I have been trying for over an hour and it repeats telling me that my email addresses are not entered correctly, however they match. ? 

    I have tried to create an account via ePrintCenter and it seems that the published application has several flaws in interpreting the provided input.
    1) In the Filed for last Name I enter my last name, which consist of only Alph Characters. The form however thinks that there is some sort of special character and rejects my Input.
    2) E-Mail address. is not identical; OK, so I do a quick OCR on the E-Mail and guess what they are identical. Again the form Fails to recognize this.
    3) Enter a password (2 Fields) and a third is displayed which is marked as "*required" but is not labeled as to what the required info could possibly be. Or is it a 3 password confirmation box, who knows.
    All I know is that a simple registration is a major pain with this HP site.
    Any Help as to how to alleviate this would of course be greatly appreciated.

  • After creating a new user account, how do I move my files into the new user?

    I have an issue where my 'Desktop/Screensaver' prefs seem to be corrupt somehow. When I click on that icon in System Preferences, it stalls and I get the spinning ball, thus resulting in a force quit. After reading a Mac Format magazine where someone wrote in with a similar issue, they said to trash various prefs (did that and made no difference) and if that didn't work, try creating a New User account (therefore creating brand new system prefs) and move your stuff over.
    Well, I've created the New User account, but I can't figure out how to move/copy my stuff into the user folders. After copying and attempting to move stuff in, I see folders with a red circle with a white line through it (like a 'no entry' sign).
    Any clue as to how this can be done? All I'm trying to do is to reinstate the system prefs so they are not corrupt anymore on my log-in.

    No. Not the main Library folder. Make absolutely sure you are in the Home Library folder and not the main Library folder.
    Your Home Library folder is hidden in Lion. To get to it, in the Finder menu, select GO and hold the option key down. Select Library in the submenu. The Finder window will open in your Home Library. This is where your user prefs are stored.
    Once there, you will see the Preferences folder. Open it up, select all items within it and move them to the trash. You will need to restart in order for the new Finder preferences to be recreated.
    Once you restart, then you will be back to the default preferences to the system and all applications. And yes, it will affect all settings including your Dock, just as logging into a new user. You will have to reset everything there also.
    If you wish to do a selective method, instead of deleting all preferences, try deleting the one associated with your problem. Screen saver problems should be affected by the system preferences, so try deleting this:
    com.apple.systempreferences.plist
    com.apple.systempreferences.plist.lockfile
    Note that when you delete system file preferences, a restart will be required. For applications, just quit the application before trashing preference files.

  • Creating a new user account and curious log in behavior...

    First off I'd just like to apologize if that is not the correct place to be posting this, but after looking around I don't see a perfect fit for this topic anywhere, so I figured here should be okay. Also I want to apologize if this turns out to be a rather lengthy post, I just want to ensure that I supply all info...
    Okay, so about a month ago I recognized that my current user account is slowly but surely taking longer and longer to "boot up" after I put in my password and tell it to log in. What usually happens is that I click log in, the background image and taskbar almost immediately pop up but nothing else (finder icons, dock, and the multiple icons in the taskbar which include the airport signal, user name, bluetooth status, battery strength, volume, and my iChat and Adium status) the only things to immediately "activate" in the taskbar are the clock and spotlight.
    As of late when I log in something especially strange is happening in that after the 5 or so minutes it takes the dock, rest of taskbar, and finder icons to appear my PB will play the default Apple sound of me emptying trash, rather there is anything actually in the trash or not. It dosen't delete the objects in the trash (if any, as I usually keep it empty), just simply plays the sound. I'm not sure if it playing this sound ties in any with the lagging log in times, I just wanted to mention it as the log in times have slowed down considerably since this sound started.
    Bottom line given that there is no way that I know of fixing this problem, I am planning to simply create a new user account. Actually I have already created the new account (by the way, it logs in literally instantaneously, and does not make the strange trash being emptied sound) but was looking for info on how to get all of my files from one account to the other. Unfortunately for me everytime that I install a program and the dialog box pops up asking if you want to install it on all user accounts or just the current one I always click "just the current one" (please don't ask why, as there is seriously no reasoning to this at all...), so is there a way to transfer my current programs from one user account to the other without reinstalling??? It's actually not that many programs I'm talking about here (Shapeshifter, Xounds, XFactor, AIM, Adium, Cocktail, Toast, Popcorn, iPod Rip, and Office), I just figured that if I can simply transfer rather than reinstalling them, it would be a lot easier.
    However my 2 primary concerns are my iTunes and iPhoto libraries (3330 songs and 4182 pcitures respectively), considering that I've spent literally hours making countless playlist in iTunes, and countless folders, slideshows, and books in iPhoto, if I was to lose all this it would truly be a mess.
    I know I'm probably making a big deal out of this and it's an extremely easy and basic process, please just pardon this still pretty new Mac user and help me out:) Also if anybody else has experienced the log in slow down or strange trash being emptied sound I would be glad to hear your experiences.
    Thanks in advance!!!
    Mervyn

    Hi Mervin,
    Bottom line given that there is no way that I know of fixing this problem, I am planning to simply create a new user account.
    You can do that (but I wouldn't) this KB article outlines how:
    http://docs.info.apple.com/article.html?artnum=155373
    Basically you will copy the folders within your old home to replace the folders in the new home. Here is a list of specific folders if you decide to do that but a better solution would be to sort your existing user.
    Here where your important data is stored ("~" stands for "Home"):
    Your Data in Documents
    ~/Library/Application Support/AddressBook (copy the whole folder)
    ~/Library/Application Support/iCal(copy the whole folder)
    Also in ~ / Library/ Application Support (copy whatever else you need)
    ~ /Library/Keychains (copy the whole folder)
    ~/Library/Mail (copy the whole folder)
    ~/Library/Preferences/com.apple.mail.plist * This is a very important file which contains all email account settings and general mail preferences.
    ~ / Library/iTunes (copy the whole folder)
    ~ / Library/Safari (copy the whole folder)
    ~ / Library/iMovie (copy the whole folder)
    ~/ Pictures/iPhoto Library
    If you want cookies:
    ~/Library/Cookies/Cookies.plist
    ~/Library/Application Support/WebFoundation/HTTPCookies.plist
    so is there a way to transfer my current programs from one user account to the other without reinstalling???
    As for applications, they should all be in your Application folder(there is only one) and available to ALL users, unless you have put "limitations" or "parental controls" on the account.
    Now to the best course of action:
    To find the issue affecting your existing user account, follow these steps:
    Log back into your normal user account:
    1. Navigate to ~(yourhome/library/fonts - drag this folder to the desktop.
         • Restart and test your applications.
         • If they work start adding the fonts back few at a time.
    ( Likely suspects are Time RO & Helvetica Fractions, also if you do not use Classic you can trash the classic fonts.)
    2. Check Preferences Thoroughly;
         • Navigate to ~(yourhome/library/preferences drag this folder to the desktop.
         • Restart and test your applications.
         • If this works, save the old preferences folder somewhere else or on disk, name it "old prefs" .
    ** Note: A very important file is the "com.apple.Mail.plist" preference file located in the Preferences folder which contains all email account settings and general mail preferences (hold this one and replace if your problem is not with Mail).
    You'll have to go through some of your System Preferences and apps to set the preferences back to how you like them. (Or if you have the time and inclination, "cherry pick" through until you find the problem one or two.)
    3. Check Permissions Inside Home Folder
       • Navigate to yourhome/library.
       • Get Info (Command - i) on folders for apps you are having problems with.
       • Open the "Ownership & permissions" disclosure triangle.
       • Make sure you are the owner, with "read and write" access.
    • Click on "apply to all"
       • If this is correct, open the "Applications Support" folder and do the same      procedure (Command+I) for the folders with the names of the applications you are      having trouble with.
    Note:
    The reason to check this is because repairing permissions with Disk Utility doesn't touch permissions inside your home folder.
    If the isssue persists navigate to ~/library/caches and drag this folder to the trash, then log out and back or restart. There is no need to replace this folder.
    Good luck, let us know.

  • How to create a new user account?

    Hi,
    Could you point me to the document/maunal on
    how to create a new user account for OS X 10.4?
    I somehow couldn't find that from Apple web site.
    And I found one here:
    http://www.mcelhearn.com/article.php?story=2004110211244242
    and followed the instruction:
    # echo 'henry::512:512::0:0:Henry James:/Users/henry:/bin/bash' | sudo niload -v passwd /
    but nothing happened. Either this doesn't work with
    V10.4 (which I use), or I missed something.
    Any pointer would be much apprecaited.
    Thanks.
    Macbook Pro   Mac OS X (10.4)  

    Hi Allan and Simon,
    Thanks for your responses.
    Sorry I didn't make my question clear. I meant:
    "How to create a new user account with command line"?
    The GUI (System Preference) would work. But I'd like
    to how to do it from command line (just like on Unix).
    Any inputs would be appreciated.
    Thank you.
    Macbook Pro Mac OS X (10.4)
    Macbook Pro Mac OS X (10.4)

  • How do I create a new user account?

    I have a new iPod with a different iTunes account than my other devices.  How do I sync the iPod on my iMac with the songs/movies from its own iTunes account?  Do I need to create a new user profle on the computer for that?

    As you said, I recommend to create a new user account and create a new iTunes library on that user with the content of the iPod. If you sync it with your user account, you will get on the iPod the content from a different Apple ID and maybe content that you don't want.
    To create a new user account, open System Preferences > Users & Groups, and press the + button that it's below the left sidebar (where users are listed). Then, just follow the steps to set up the user account.
    Now, every time you start your Mac, OS X will ask you the user account you want to start OS X with

  • How do I create a new user account and migrate my data to it?

    I have problem with Adobe Bridge crashing when I exit Camera Raw.  I was advised by my local apple service store to create a new user account and test Bridge using the new account.  It works fine.  So what do I do now?  I don't know what in my account is causing the conflict but assume that the solution might be e newly setup user. 

    Checking the behaviour in another user account is a TEST, not a solution! You don't need to move everything over. Otherwise, every time you get a user account problem, you'll keep moving to a new user account again and again.
    If the problem does not occur in a new user account, then the cause is something IN your user account. This is usually a Preference file. Adobe Bridge seems to crash a lot, and it can usually be fixed by deleting the Bridge folder in <user>/Library/Application Support/Adobe/
    You can also try deleting the Bridge preference file, which will be in <user>/Library/Preferences, and called com.adobe.bridge5.plist (or similar).
    If that doesn't work, you can test removing a whole bunch of the various Adobe files in those folders. You can always put them back if they don't change anything. And you've got a backup, haven't you? ;-)

  • Can I Create a New User Account and Move Existing Account ???

    Lion was reinstal.
    I'm suspecting issue with one user account.
    Can I creat a new user account and move all my files to that new user?
    What are the impact?
    How about permissons on this files?
    What about the Library Folder?
    Thank you for your help and support.
    BigBlaze

    This should help you out after  you have created the new user account. You are trying to make it much more complex than it needs to be. Just follow the directions in:
    Transferring files from one User Account to another.

  • My friend gave his Macbook pro to me a month ago but he forgot his password. I want to log him out and creat a new user account of myself.

    my friend gave his Macbook pro to me a month ago but he forgot his password. I want to log him out and creat a new user account of myself.

    Did your friend also provided you with the original DVDs that came with the MacBook Pro?

  • Have recently had problems with itunes freezing on me so having done various things to rectify it im now going to try to create a new user account but where the heck do you find the start menu ?

    have recently had problems with itunes freezing on me so having done various things to remody it , im now going to try to create a new user account but i cant find where to start things ! ive been told to go to the start menu but where the heck is it ?

    Leigh...
    but cannot do this because I cannot access Mac App Store
    If you can't access the App Store from the Apple menu, Dock, or Applications folder installing the Mac OS X 10.6.8 Update Combo will reinstall the App Store for you.
    It's ok to do this even you are already running v10.6.8.
    Plants vs. Zombies, and that is all for additional software on here
    FYI:  Some third party software can cause issues with the App Store >   Mac App Store: Sign in sheet does not appear, or does not accept typed text
    Apple is not responsible for incompatibility isssues with third party software.

  • Software Version 3.0 Fails-Reset Fails-Create a New User Account?

    Last night I purchased the new 3.0 software. After attempting to install my pc froze up. After about 20 minutes I no choice but to do a hard reset. I then got a message that I had to do a restore back to the factory setting-when attempting to do so-if failed as well.
    I called Support the first time who advised me that there was nothing I could and it was out of warranty (incorrect-I have a 2 year extended purchase) and to bring it to a store. Fortunately-I have one close by. I zipped over to the store only to be told there was no tech support due to the new iphone launch. Talk about great service. They finally got me someone who took it and apparatenly said he had restore it. He came out from the back and told me to uninstall and reinstall iTunes.
    I came home and the same process happened all over again.
    I had to call back support and was fortunate to get a very helpful, patient and great guy who told me I had to create a new user account 9i use Vista). Upon doing so i was able to get my touch restored.
    Why would I have to do this procedure? It took over 4 hours?

    Does anyone know what may have caused this? HELP!

  • Create a new user account without share the same apps

    Does someone knows how to create a new user without having to share the same apps that i have installed on mine user account?

    There are two Applications folder on the Mac. One is at Root and the other is in Home directory.
    Any applications in the Applications folder as Root level can be executed by all users of the Mac.
    Any applications in the Applications folder in your Home directory can only be executed by you.
    Why do you really care anyway?
    Allan

  • I created a new user account and then got rid of it - did I get everything?

    A couple wanted to use one computer - so I thought to make 2 user accounts so they could have separate email accounts and separate desktops - so things would be easier to look at.
    After I made the 2nd user account My "mac guru" said I made a huge mistake - and told me the multiple user accounts can really goof up the computer in his experience. He continued - that recovering information from such computers is insane and can cost $$$ should the drive break. So - no problem... I deleted the new user account I created... and they'll just use the computer the old fashioned way.
    However - are there any left over files that might have been created? I want to get rid of any left over files or anything else you can think of that might have been left behind by deleting the new user account.
    (You should know I inputed 2 email accounts for the second user - and email downloaded onto the computer, and I copied documents into the Documents folder. I am afraid there may be email mess left over - or are you sure the computer deleted everything when I told the computer to delete the user and the home folder?
    Thanks in advance!

    If you have deleted the account all the data are removed. Nevertheless, to be sure have a look at your /Users folder to see whether there's a folder named Deleted Users. Normally the home folder of any deleted user is moved into that folder. So to remove everything completely you have to erase the previous user's home folder from Deleted Users.
    But to speak frankly, I think there's absolutely nothing to worry about having more than one user account. I have multiple accounts on my machine and never experienced any problems so far. The core system of OS X is Unix and that's a _multiuser system by design_ ! It was created from the start with more than one user in mind. The files of each and every user are held strictly separate - the most obvious and straightforward consequence of that being the complex concept of permissions.
    So if there are more than one users who work with the computer it is reasonable for the admin to create an account for each one!
    floba

Maybe you are looking for

  • What can I do about spoofing

    My email address is being used for spoofing. What can I do?

  • FBRA / FB08 - vobelnr,fm_document_close. Error

    HI, I have implemented FM, Scenario is - PO- MIGO- MIRO & F-53 for payment, when i am making payment through F-53, i have cosidered a discount from the Vendor for round up purpose . at that time systeme is giving the warning message payments are not

  • Basic type, Idoc type, Message type

    hi, can anyone please explain me the exact difference between basic type, idoc type and message type... Thanks in advance, Krish

  • XML "container" elements and JAXB

    Hi, Does anyone know if there is a way to tell the JAXB compiler not to create classes for certain elements which are just containers for a collection of some other elements. For example, suppose the resultant XML (snippet) is like this: <library> <b

  • Background Jobs - Process Chains

    Hello, I want to schedule a background job for a process chain so that it triggers the process type and start executing... Can anyone please let me know how i can do it?