Any suggestions for an all-in-one "cable modem router print server" (N)

any suggestions for an all-in-one "cable modem router print server" (N)?

If that's a problem with your cable company, change the company.
If your cable company is not able to provide you with a cable modem which gets you full performance for their service why would you bother with that company or try to make it better than them?
If you subscribe to a 100 Mbit/s service they must be able to provide you with a modem that does 100 Mbit/s and be able to demonstrate you 100 Mbit/s on your cable.
If they are unable to provide you with a modem which does 100 Mbit/s and thus cannot demonstrate that the service they have installed in fact can do 100 Mbit/s but only give you a 50 Mbit/s because that's the best they have, why bother buying yourself a better modem to find out whether or not their service does what it promises or not??
In addition, an integrated device won't get you better performance. On the contrary, consumer devices are generally single CPU (and core) devices. It's usually running some Linux or similar. If a single process gets overloaded it can drag down the performance of the whole device. For instance, let's say there is a bug in the print server software of the router. You print something and it hangs and the print server process on the router runs wild. Now the CPU is fully loaded and the routing performance will go down. If there is a bug in the routing software it will bring down the whole device and you can't even print.
You'll get the best performance if you use dedicated devices because then one device cannot overload another. Get a modem. Get a wireless ethernet router. Get a printer with integrated print server. That's far better.
It's like the all-purpose audio device compared to components...

Similar Messages

I downloaded the software for my All in One B-209-a printer on my HP G72 Windows 7 64 bit notebook

I downloaded and then uninstalled the software and drivers for my Photosmart Plus M-209a per support instructions I know 25 times. When I go the Start then All Programs and click on HP I can't find the printer or the Solution Center.
I checked Devices an Printers and the printer is there and checked off. I'm trying to open the Solution Center and get this message saying that the software download was wasn't completed.
I know I downloaded and then uninstalled the software and drivers for my Photosmart Plus M-209a per support instructions, I know 25 times.
Need Help.
HP 72-B60 Notebook Windows 7 1st Edition and Photosmart Plus M-209a All in one. I've been working on these for 4 days. 2 hours here 4 hours there and so on.. I'm stumped.

I suggest trying to download via a browser other than the one you used.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Cannot display the screen of the macbook on TV. OS is Lion 10.7.2. Connection to the TV is over HDMI cable. TV shows only the backgroud picture of Lion. Do you have any suggestions for help ?

Cannot display the screen of my macbook on TV. OS is Lion 10.7.2. The Macbook is connected to the TV is over HDMI cable. TV shows only the backgroud picture of the Lion OS and reacts even to mission control. Do you have any suggestions for help ?

You have the display set in Extended Desktop mode. In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen. You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
Or if you want to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box.

I recently replaced the hard drive in my computer. I am afraid to download and reinstall itunes again because I worry about losing all the music I had on my iPod Nano. Any suggestions for solutions?

I recently replaced the hard drive in my computer. I am afraid to download and reinstall itunes again because I worry about losing all the music I had on my iPod Nano. Any suggestions for solutions?

The dragging does not work:
- Transfer iTunes purchases by:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
- For other music you will need a third-party program like one of those discused here:
Copy music
- Connect the iPod to your compouter and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up.
- Restore the iPod from that backup
Nothe that the backup that iTunees makes does not include synced media like apps nd music.

HT1338 My Mac book Pro is running very slow and the rainbow ball is appearing all the time. Any suggestions for clean up??

My Mac book Pro is running very slow and the rainbow ball is appearing all the time. Any suggestions for clean up?? I have the OS X Lion system.

As well as what a brody asked :
- do you need more RAM? (run Activity Monitor and see how much free RAM - green - is available)
- do you Restart fairly regularly, e.g. at least once a week, to clear out any swap or temporary files?
- do you need to do maintenance, e.g. clearing out caches and unused logs, etc?

My MacBook Pro is all of sudden having issues with pop up ads. I am running OSX 10.5.8. Any suggestions for fixing the problem?

All of a sudden I am getting TONS of pop up ads. I am on a Macbook Pro running OSX 10.5.8. Anyone have any suggestions for fixing the problem?

Take a look at my Adware Removal Guide.
(Fair disclosure: The Safe Mac is my site, and contains a Donate button, so I may receive compensation for providing links to The Safe Mac. Donations are not required.)

My computer is functioning really slowly since downloading Mavericks. My programs lag opening if at all. Any suggestions for fixing this?

My computer is functioning really slowly since downloading Mavericks. My programs lag opening if at all. Any suggestions for fixing this?

I installed it maybe 2 weeks ago, Here are my results:
Hardware Information:
    MacBook (13-inch, Late 2009)
    MacBook - model: MacBook6,1
    1 2.26 GHz Intel Core 2 Duo CPU: 2 cores
    2 GB RAM
Video Information:
    NVIDIA GeForce 9400M - VRAM: 256 MB
System Software:
    OS X 10.9.2 (13C1021) - Uptime: 0 days 22:44:15
Disk Information:
    TOSHIBA MK2555GSXF disk0 : (250.06 GB)
        EFI (disk0s1) <not mounted>: 209.7 MB
        Marshmallow (disk0s2) / [Startup]: 249.2 GB (125.02 GB free)
        Recovery HD (disk0s3) <not mounted>: 650 MB
    MATSHITADVD-R   UJ-898
USB Information:
    Apple Inc. Built-in iSight
    Apple Inc. Apple Internal Keyboard / Trackpad
    Logitech USB Receiver
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information:
Gatekeeper:
    Mac App Store and identified developers
Kernel Extensions:
    [kext loaded]    at.obdev.nke.LittleSnitch (4052 - SDK 10.8) Support
    [not loaded]    com.devguru.driver.SamsungACMControl (1.4.14 - SDK 10.6) Support
    [not loaded]    com.devguru.driver.SamsungACMData (1.4.14 - SDK 10.6) Support
    [not loaded]    com.devguru.driver.SamsungComposite (1.4.14 - SDK 10.6) Support
    [not loaded]    com.devguru.driver.SamsungMTP (1.4.14 - SDK 10.5) Support
    [not loaded]    com.devguru.driver.SamsungSerial (1.4.14 - SDK 10.6) Support
    [not loaded]    com.mobile-stream.driver.EasyTetherUSBEthernet (1.0.4 - SDK 10.4) Support
    [not loaded]    com.motorola-mobility.driver.MotMobileMS (1.0.0 - SDK 10.5) Support
    [not loaded]    com.motorola-mobility.driver.MotMobileMTP (1.2.2 - SDK 10.5) Support
    [not loaded]    com.motorola-mobility.driver.MotMobileUSB (1.2.2 - SDK 10.5) Support
    [not loaded]    com.motorola-mobility.driver.MotMobileUSBLAN (1.2.2 - SDK 10.5) Support
    [not loaded]    com.motorola-mobility.driver.MotMobileUSBLANMerge (1.2.2 - SDK 10.5) Support
    [not loaded]    com.motorola-mobility.driver.MotMobileUSBSwch (1.2.2 - SDK 10.5) Support
Launch Daemons:
    [running]    at.obdev.littlesnitchd.plist Support
    [running]    com.adobe.ARM.[...].plist Support
    [loaded]    com.adobe.fpsaud.plist Support
    [loaded]    com.adobe.versioncueCS4.plist Support
    [running]    com.autodesk.backburner_manager.plist Support
    [running]    com.autodesk.backburner_server.plist Support
    [failed]    com.autodesk.backburner_start.plist Support
    [loaded]    com.google.keystone.daemon.plist Support
    [running]    com.motorola-mobility.mmcfgd.plist Support
Launch Agents:
    [running]    at.obdev.LittleSnitchUIAgent.plist Support
    [loaded]    com.adobe.CS4ServiceManager.plist Support
    [running]    com.Affinegy.InstaLANa.plist Support
    [loaded]    com.google.keystone.agent.plist Support
    [loaded]    com.motorola.MDMUpdater.plist Support
    [running]    com.motorola.motohelper.plist Support
    [loaded]    com.motorola.motohelperUpdater.plist Support
User Launch Agents:
    [loaded]    com.adobe.ARM.[...].plist Support
    [loaded]    com.adobe.ARM.[...].plist Support
    [running]    com.akamai.single-user-client.plist Support
User Login Items:
    iTunesHelper
    Skype
    Dropbox
    Android File Transfer Agent
    GrowlHelperApp
    TWC-WiFi Menu
    KiesViaWiFiAgent
    KiesViaWiFiAgent
    fuspredownloader
Internet Plug-ins:
    o1dbrowserplugin: Version: 5.3.1.18536 Support
    Default Browser: Version: 537 - SDK 10.9
    AdobePDFViewerNPAPI: Version: 11.0.02 - SDK 10.6 Support
    FlashPlayer-10.6: Version: 13.0.0.206 - SDK 10.6 Support
    DivXBrowserPlugin: Version: 2.1 Support
    Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
    Flash Player: Version: 13.0.0.206 - SDK 10.6 Support
    QuickTime Plugin: Version: 7.7.3
    googletalkbrowserplugin: Version: 5.3.1.18536 Support
    iPhotoPhotocast: Version: 7.0
    AdobePDFViewer: Version: 11.0.02 - SDK 10.6 Support
    CouponPrinter-FireFox_v2: Version: Version 1.1.6 Support
    JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions:
    DivX HiQ: Version: 2.1.1.94
    DivX Plus Web Player HTML5 <video>: Version: 2.1.1.94
Audio Plug-ins:
    BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
    AirPlay: Version: 2.0 - SDK 10.9
    AppleAVBAudio: Version: 203.2 - SDK 10.9
    iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
    Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
    fbplugin_1_0_3: Version: (null) Support
3rd Party Preference Panes:
    Adobe Version Cue CS4 Support
    Akamai NetSession Preferences Support
    Flash Player Support
    Growl Support
Time Machine:
    Skip System Files: NO
    Auto backup: YES
    Volumes being backed up:
        Marshmallow: Disk size: 232.09 GB Disk used: 115.65 GB
    Destinations:
        Patrice [Local] (Last used)
        Total size: 465.44 GB
        Total number of backups: 42
        Oldest backup: 2012-07-09 21:31:08 +0000
        Last backup: 2014-04-28 23:46:05 +0000
        Size of backup disk: Adequate
            Backup size 465.44 GB > (Disk used 115.65 GB X 3)
    Time Machine details may not be accurate.
    All volumes being backed up may not be listed.
Top Processes by CPU:
         5%    WindowServer
         3%    plugin-container
         1%    firefox
         0%    ps
         0%    Dropbox
Top Processes by Memory:
    381 MB    firefox
    86 MB    plugin-container
    51 MB    Finder
    39 MB    WindowServer
    33 MB    softwareupdated
Virtual Memory Information:
    30 MB    Free RAM
    548 MB    Active RAM
    523 MB    Inactive RAM
    363 MB    Wired RAM
    1.04 GB    Page-ins
    151 MB    Page-outs

Any suggestions for building a home network (in a modest...

Any suggestions for building a home network (in a modest 1600 sq. ft. home) with the following requirements...
1) Laptop(s) and PC share broadband (cable) internet connection
2) Access files on PC from laptop(s) and vice versa
3) PC and laptop(s) share printer (Canon Pixma 610)
4) Send media on PC to TV
5) Send music to wireless speakers (not purchased yet)
Note hardware specs:
A) One laptop runs on Windows XP and has an Intel PRO wireless 2915ABG network connection
B) PC runs Windows XP Media Center
I was thinking about the wireless N broadband router 300. From the experiences of the community, will I be able to achieve my goal? Beside a PC adapter, is there any other hardware I will need?
A couple other questions.
The router will likely be sitting right next to my PC. Does the PC need to have a wireless adapter or can it be wired from the router to the PC?
When will the media extender be available? Will it work with Windows XP?
Thank you.
Chris

I personally might not buy Wireless-N, but the idea of being on the bleeding edge is nice.
Anyway, whichever router you choose, you should be able to accomplish almost everything you need.
You'll be able to share your internet amongst all of the computers, and share files between them all. Local firewalls and permission settings on individual computers could potentially pose a problem.
Sending media to your TV may or may not be possible, depending on what other hardware you have. A router itself would not be able to do that, as a TV doesn't usually have any form of WiFi, but if you had a box connected to it for displaying content on the TV, you could do something like that...
Wireless speakers are generally a separate wireless system. As far as I know, there is a wireless transmitter that sits next to the amp (or other sound source), and broadcasts the music wirelessly to the speakers. You'd have to make sure the speakers and wireless router are on different channels as to not cause interference.
Don't know much about the media extender, but highly likely will be compatible with XP.

Any suggestions for 3G service in Kenya?

Any suggestions for 3G service in Kenya?

If that's a problem with your cable company, change the company.
If your cable company is not able to provide you with a cable modem which gets you full performance for their service why would you bother with that company or try to make it better than them?
If you subscribe to a 100 Mbit/s service they must be able to provide you with a modem that does 100 Mbit/s and be able to demonstrate you 100 Mbit/s on your cable.
If they are unable to provide you with a modem which does 100 Mbit/s and thus cannot demonstrate that the service they have installed in fact can do 100 Mbit/s but only give you a 50 Mbit/s because that's the best they have, why bother buying yourself a better modem to find out whether or not their service does what it promises or not??
In addition, an integrated device won't get you better performance. On the contrary, consumer devices are generally single CPU (and core) devices. It's usually running some Linux or similar. If a single process gets overloaded it can drag down the performance of the whole device. For instance, let's say there is a bug in the print server software of the router. You print something and it hangs and the print server process on the router runs wild. Now the CPU is fully loaded and the routing performance will go down. If there is a bug in the routing software it will bring down the whole device and you can't even print.
You'll get the best performance if you use dedicated devices because then one device cannot overload another. Get a modem. Get a wireless ethernet router. Get a printer with integrated print server. That's far better.
It's like the all-purpose audio device compared to components...

Looking for a for an all-in-one printer that is compatible with greeting card programs...

looking for a for an all-in-one printer that is compatible with greeting card programs...my original one was an HP PSC 1510...replaced it with a Deskjet 1050 & it does not work...any suggestions?

I bought an epson xp650 a couple of months ago and cannot fault it. It does everything I require and it is the wifi model so I can print directly from my ipad/iphone. Not sure if you are asking about the colour of the unit or just to be able to print black and white, Obviously all printers will print black and white but just to give you a little more info the printer I bought is the white version and it looks really nice sat next to my imac 27''
Hope this helps.

Does anyone have any suggestions for Ad blocking? I'm getting a lot of pop up ads while using Facebook from Safari.

     I'm getting a lot of pop up ads. mostly while using Facebook. I'm running Safari on a Macbook Pro running Yosemite. Does anyone have any suggestions for an Ad blocker. I don't see anything in the App store.
      I can't swear to it but I don't recall this being a problem pre-Yosemite. I could be wrong. I haven't been real active on Facebook until recently. I see some third party apps out there but am alway wary of non approved software.
     Thanks
     Ron

You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Any Suggestions for CGI Script for Web Slide Slow?

Do you have any suggestions for creating a slideshow for my web site, 6 same-size jpgs that rotate automatically?
I think I prefer a cgi script. However, I've tried two that don't work on Firefox or Safari. One developer tells me that he can see the rotating photos.
I'm also open to software to create this. However, I'd prefer to use html code.
Of course, it must work cross platform.
Any suggestions?
G5 Quad; Mini Mac; PowerBook G3; iPods Mac OS X (10.4.8) Using Dreamweaver 8

Oh, what a beautiful baby! Is he/she yours?
She is mine. At least that's what the Mrs. tells me!
When you say gif, I am assuming that you mean the
format really must be gif and not jpg. Is that
correct?
Yes, the file is a GIF file. It's actually an animated GIF file, meaning that the images that you see are all frames of animation in a single GIF file. There are a lot of apps out there that can create animated GIFs. I happen to use Adobe ImageReady because that is what is on the hard drive.
Can you give me a hint about the dithering issue? Do
I dither or not dither, that is the question.
This is the major downside of the GIF format. It is a really old format...from back in the CompuServe bulletin board days...maybe older. Anyways, it is my understanding that GIFs can only hold information for 256 colors....any 256 colors, but no more and no less. So now in the days of "millions of colors" jpegs, you can imagine that a 256 color palette is limiting. But if the colors of your images are sufficiently close, its possible that 256 colors makes for perfectly acceptable images across all images. This is the one variable of converting images to GIF that can make it or break it for you. If your image has a pretty broad tonal range...like fleshtones or any other gradient...then 256 colors is going to represent things poorly. Then you will get dithering artifacts which is like averaging errors...colors are close...as close as possible...but not close enough to make a smooth gradation. Anyways, that's my layperson's understanding.
But for some images, it looks just fine.

Any suggestions for improving my efficiency?

These are the two methods I've come up with to use what I have for making movies. One is for DVDs. The other is for making QuickTime MOV files for CDs. This is the process I have to use because we don't yet have our digital video camera that is firewire compatible with Final Cut.
For DVDs that will play in DVD players or media software on your computer:
1. I take the Video_TS folder and run it through DVD Imager (free, macupdate.com) which converts it into an IMG file.
2. I use the Apple Disk Utility (part of OS X) and burn the IMG file to a DVD.
Simple enough.
Making our recorded footage editable in Final Cut and then exporting as a QuickTime movie is a little more complicated. There may be a simpler way to do all this (like get a fire-wire FC-compatible camera I can capture footage from) but this is the process I finally got to work:
1. In the Video_TS folder are two VOB files. The larger one is the one that actually has your video on it. I use MPEG Streamclip (free, squared5.com) to remove the timebreaks (otherwise all you get is the poster frame) and convert it to a Quicktime MOV file. For settings, I just use Apple Video, 720x480 NTSC, and 30 fps. You need to buy the Apple Quicktime MPEG-2 Playback Component ($20, apple.com) for this free software to work.
2. Import the MOV file into Final Cut (I use Express which is $300 from apple.com) and do your editing and other yumminess. You'll need to render it first.
3. Export as an MOV file ... there's no .mov extension and the Info says it's a Final Cut Express Movie file, not a QT MOV which makes me nervous so I I open it in QuickTime Pro ($30, apple.com) and export it using the Movie to Quicktime Movie setting.
4. Then I burn my Quicktime movies to a CD.
Any suggestions for improving my efficiency?

"For DVDs that will play in DVD players..."
If what you want is just to make copies of a DVD you burned yourself (eg using iDVD or your DVD camcorder) there is a simpler way: just create an image of the DVD on your desktop using Disk Utility, and then burn it using Disk Utility.
You need to go into the process of copying the VIDEO_TS folder only if you want to make changes to it. For example you might need myDVDEdit, a very powerful free editor of the DVD structure (to change the menu button behaviour, or so). Or maybe if the image is of a different size, from a small DVD to a large one.
Piero

Usb for 1510 all-in-one printer causing problems with it accepting print jobs

I am having trouble downloading the driver for a 1512 all-in-one printer. It was working for about a week and it is not working now. I loaded the suggested driver 1510 all-in-one driver but when I get to plugging in the usb from my Windows 7 laptop to the printer, it does not feel it is connected. I can print items that I scan but am puzzled how it will not print. The only thing I have deduced is I need a new usb cable. I bought on ebay as I've always had good luck with hp products.
Sparky325

I decided that in spite of the fact that it had previously printed, I got another USB cord and used that and then the printer worked. The one I received with the printer must have been too loose to make a connection. This one feels snug when i need to print from my laptop. Thanks for your help. Sparky 325

Any suggestions for creating u201CCustom Measuresu201D ......

Hi SAP BPC guys,
could give me   Any suggestions for creating u201CCustom Measuresu201D for
§   Average to Daily
§   Average to Monthly
Thanks & Regards,

Celletti wrote:
In the text file the ~ ... | creates a radio button group and a #....| creates a checkbox group which all works fine. The problem I am having is with the more complicated options/addons such as having a choice between 0-n number of object 1 and/or object 2, having 0-4 powers out of a 7 checkbox power group, or having 0-n special units added to the squad that all are the same but all can have different powers/addons. I suspect you need to write a data model for the information you want to capture. Seems like you've made a pretty good start with your various types and capabilities, now you just need to extend that to your more esoteric stuff.
I'd also try to think about it a bit more generally, rather than applying it to a specific Swing component. For example:
A Radio button is a "one of many" choice (ie, a "Selector"), whereas a Checkbox is a "0 or many of many" (possibly with limits). If you think about it this way, you leave the decision of how to represent them until later on, which is usually good practise.
If you create a good model, you'll also be better prepared if you later decide to store these things in a database.
Winston

Any suggestions for an all-in-one "cable modem router print server" (N)

Similar Messages

Maybe you are looking for