Any suggestions for an animation program using photographs that can be incorporated into iMovie or Final Cut express?

The MTS files will always be grayed out. Do not drill down into the folder structure. Select the top level of the AVCHD folder structure. If this is a hard drive it may take a very long time to load. People have reported 20 minutes to half an hour.
Other possible problems, conflicts with other software like Perian. Also if there is mixed media on the drive; media in different formats can make the directory unreadable. What are the exact specifications of your media? What settings are you using in FCE?

Similar Messages

How can I improve the sound in final cut express using my mic?

How can I improve the sound in final cut express using my mic?

I think you're in the wrong forum. This is the LiveType forum. There is no sound in LT.

Flip mino or flip ultra HD to use in imovie and final cut express

i am contemplating either flip mino HD, Flip ultra HD or creative vado HD. Which one has a good video quality and design style? Is it necessary for 2 hrs movie or actually i like the flip mino coz its slimmer but only takes 1 hr video. By the way, What kind of format the flip camcorder will save as coz someone says its .avi but some says Mp4 format? If in Mp4 format, is the quality still good? most of the time i will shoot in ultra hi definition setting. I will use imovie and final cut for edit and does the Flip compatible to imovie and Final cut? How about creative vado? any recommendation?
But most likely i will get the flip.

The Flip cameras are easy to use and pocketable.
Unfortunately it is their very simplicity that drastically limits what they can do.
They are OK for someone who wants to take daft pictures of their friends and post them on YouTube but for serious film-making they are non-starters.
They record low quality highly compressed video onto an internal memory.When you have shot your 60 minutes of video you can’t use the camera any more until you get it to a computer and download it.
The lens is a small aperture fixed focus with no zoom.
Actually to be correct there is a 2x digital zoom, but as we all know, digital zooms are a total waste of time and only reduce the quality still further. You can get the same effect by enlarging your picture 2x in the computer - not to be recommended.
So what at first sight, to the uninitiated looks like a very cheap camera, quickly turns out to be a very expensive toy.
Much better to buy a proper camera (which won't cost all that much more) like Skalicki suggests.

HT201272 I have deleted a song from my library and want to re-download it. When I access my purchased items in the iTunes store, the song has the 'purchased' button next to it and won't let me re-download. Any suggestions for things to try?

I have deleted a song from my library and want to re-download it. When I access my purchased items in the iTunes store, the song has the 'purchased' button next to it and won't let me re-download. Any suggestions for things to try?

While you can redownload most past purchases without charge, you can't redownload movies without paying again. See Downloading past purchases from the App Store, iBookstore, and iTunes Store: http://support.apple.com/kb/HT2519

What's the best camcorder for taking video to edit in final cut express?

I had a sony, but the file type was MTS and it required conversion to edit in Final Cut Express 3. So i sold it on ebay, and I'm looking to replace it. Does anyone have a set up that is easy to transfer HD video from their camera to their Mac, and edit those files right in Final Cut 3?
Thanks!
J

Not sure this is "rubbish" as you say Tom. FCE 4 has to take files directly from the camera. Works fine when I have the files I want to work with on the camera, does not work fine when I saved them to my hard drive, and want to import them later.
In case you don't believe my personal experience, here's another souce that has had the same conslusion:
"Incidentally, Final Cut Express will not transcode the native .MTS files directly; it needs to take the footage from the camcorder. However, a $30 utility called Voltaic can do the job outside Final Cut Express; it works on PowerPC Macs, too."
http://www.macworld.com/article/131409/2008/01/finalcutexpress4.html
To Mr. Fore, I believe you are correct, it works fine to pull right from the camera, no issue there. Issue comes in when I just want to dump video to my local hard drive and clean out the camera's hard drive so I can keep shooting, and come back at a later date to edit and clean up the old footage. I end up having to import everything from the camera to Final Cut Express 4, which is time consuming, rather than just drop the files on to my hard drive.
What I would like to know, is there a camcorder out there that saves files in a format that I can drop on my local hard drive, and then pull into FCE later. I would love to hear from someone who has done that, what camera they are using.

Can she use Final Cut Express 3.5?

My daughter, a journalism grad student, asked me to get Final Cut PRO for use in a class. I have new unopened Final Cut Express, v3.5 in hand. (Purchased a few years ago and never used it). Can she use this product? What will we lose with FCE?

Hello and welcome to the forum.
The suitability of FCE will largely depend on the media your daughter is working with. FCE works in fixed resolutions with a limited number of codecs. FCP is much more flexible in that regard, but is only available as part of the Final Cut Studio package. If she'll be using AVCHD media, she'll need to upgrade to FCE4.

How to convert MTS files for capture in Final Cut Express 4

*PLEASE HELP!!!* While waiting to buy my iMac I saved my Canon Vixia HF200 AVCHD video clips on a PC with backups stored on an external HD. I transferred these to my iMac and they are in .MTS format. I can not open them in either iMovie or Final Cut Express 4. I gather I need to convert the files somehow. What is the best way to do this? _Thank you for your help!_

Here are your options now that you just have the files...
http://discussions.apple.com/message.jspa?messageID=9966355#9966355
http://discussions.apple.com/thread.jspa?threadID=2073767&start=15&tstart=0
As Tom said, next time import directly from the volume rather than copying the .mts files.

Does anyone have any suggestions for Ad blocking? I'm getting a lot of pop up ads while using Facebook from Safari.

     I'm getting a lot of pop up ads. mostly while using Facebook. I'm running Safari on a Macbook Pro running Yosemite. Does anyone have any suggestions for an Ad blocker. I don't see anything in the App store.
      I can't swear to it but I don't recall this being a problem pre-Yosemite. I could be wrong. I haven't been real active on Facebook until recently. I see some third party apps out there but am alway wary of non approved software.
     Thanks
     Ron

You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Any suggestions for programs that can convert mpeg1 to a format that can be edited in iMovie Version 8.0.6 (821) and/or iMovie HD Version 6.0.3 (267.2) Thanks

Any suggestions for programs that can convert mpeg1 to a format that can be edited in iMovie Version 8.0.6 (821) and/or iMovie HD Version 6.0.3 (267.2) Thanks

Hi Mark
Was just looking for the answer to this exact question and I just found something that worked for me so don't know if it might be of use to you or you might have already solved your problem! Basically when I was in iMovie and I clicked to import movies from the computer into iMovie and I found the clip I wanted to import, there are a few options. I think it asked which Event I wanted to add it to but most importantly it asked me what file size I wanted...I had originally been clicking Large because it advised me to because it reduces the file size...but just on a chance there I selected 'Full - Original' for size and it imported perfectly into iMovie in it's original vertical form!
Hope this helps!
Bianca

My computer is functioning really slowly since downloading Mavericks. My programs lag opening if at all. Any suggestions for fixing this?

My computer is functioning really slowly since downloading Mavericks. My programs lag opening if at all. Any suggestions for fixing this?

I installed it maybe 2 weeks ago, Here are my results:
Hardware Information:
    MacBook (13-inch, Late 2009)
    MacBook - model: MacBook6,1
    1 2.26 GHz Intel Core 2 Duo CPU: 2 cores
    2 GB RAM
Video Information:
    NVIDIA GeForce 9400M - VRAM: 256 MB
System Software:
    OS X 10.9.2 (13C1021) - Uptime: 0 days 22:44:15
Disk Information:
    TOSHIBA MK2555GSXF disk0 : (250.06 GB)
        EFI (disk0s1) <not mounted>: 209.7 MB
        Marshmallow (disk0s2) / [Startup]: 249.2 GB (125.02 GB free)
        Recovery HD (disk0s3) <not mounted>: 650 MB
    MATSHITADVD-R   UJ-898
USB Information:
    Apple Inc. Built-in iSight
    Apple Inc. Apple Internal Keyboard / Trackpad
    Logitech USB Receiver
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information:
Gatekeeper:
    Mac App Store and identified developers
Kernel Extensions:
    [kext loaded]    at.obdev.nke.LittleSnitch (4052 - SDK 10.8) Support
    [not loaded]    com.devguru.driver.SamsungACMControl (1.4.14 - SDK 10.6) Support
    [not loaded]    com.devguru.driver.SamsungACMData (1.4.14 - SDK 10.6) Support
    [not loaded]    com.devguru.driver.SamsungComposite (1.4.14 - SDK 10.6) Support
    [not loaded]    com.devguru.driver.SamsungMTP (1.4.14 - SDK 10.5) Support
    [not loaded]    com.devguru.driver.SamsungSerial (1.4.14 - SDK 10.6) Support
    [not loaded]    com.mobile-stream.driver.EasyTetherUSBEthernet (1.0.4 - SDK 10.4) Support
    [not loaded]    com.motorola-mobility.driver.MotMobileMS (1.0.0 - SDK 10.5) Support
    [not loaded]    com.motorola-mobility.driver.MotMobileMTP (1.2.2 - SDK 10.5) Support
    [not loaded]    com.motorola-mobility.driver.MotMobileUSB (1.2.2 - SDK 10.5) Support
    [not loaded]    com.motorola-mobility.driver.MotMobileUSBLAN (1.2.2 - SDK 10.5) Support
    [not loaded]    com.motorola-mobility.driver.MotMobileUSBLANMerge (1.2.2 - SDK 10.5) Support
    [not loaded]    com.motorola-mobility.driver.MotMobileUSBSwch (1.2.2 - SDK 10.5) Support
Launch Daemons:
    [running]    at.obdev.littlesnitchd.plist Support
    [running]    com.adobe.ARM.[...].plist Support
    [loaded]    com.adobe.fpsaud.plist Support
    [loaded]    com.adobe.versioncueCS4.plist Support
    [running]    com.autodesk.backburner_manager.plist Support
    [running]    com.autodesk.backburner_server.plist Support
    [failed]    com.autodesk.backburner_start.plist Support
    [loaded]    com.google.keystone.daemon.plist Support
    [running]    com.motorola-mobility.mmcfgd.plist Support
Launch Agents:
    [running]    at.obdev.LittleSnitchUIAgent.plist Support
    [loaded]    com.adobe.CS4ServiceManager.plist Support
    [running]    com.Affinegy.InstaLANa.plist Support
    [loaded]    com.google.keystone.agent.plist Support
    [loaded]    com.motorola.MDMUpdater.plist Support
    [running]    com.motorola.motohelper.plist Support
    [loaded]    com.motorola.motohelperUpdater.plist Support
User Launch Agents:
    [loaded]    com.adobe.ARM.[...].plist Support
    [loaded]    com.adobe.ARM.[...].plist Support
    [running]    com.akamai.single-user-client.plist Support
User Login Items:
    iTunesHelper
    Skype
    Dropbox
    Android File Transfer Agent
    GrowlHelperApp
    TWC-WiFi Menu
    KiesViaWiFiAgent
    KiesViaWiFiAgent
    fuspredownloader
Internet Plug-ins:
    o1dbrowserplugin: Version: 5.3.1.18536 Support
    Default Browser: Version: 537 - SDK 10.9
    AdobePDFViewerNPAPI: Version: 11.0.02 - SDK 10.6 Support
    FlashPlayer-10.6: Version: 13.0.0.206 - SDK 10.6 Support
    DivXBrowserPlugin: Version: 2.1 Support
    Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
    Flash Player: Version: 13.0.0.206 - SDK 10.6 Support
    QuickTime Plugin: Version: 7.7.3
    googletalkbrowserplugin: Version: 5.3.1.18536 Support
    iPhotoPhotocast: Version: 7.0
    AdobePDFViewer: Version: 11.0.02 - SDK 10.6 Support
    CouponPrinter-FireFox_v2: Version: Version 1.1.6 Support
    JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions:
    DivX HiQ: Version: 2.1.1.94
    DivX Plus Web Player HTML5 <video>: Version: 2.1.1.94
Audio Plug-ins:
    BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
    AirPlay: Version: 2.0 - SDK 10.9
    AppleAVBAudio: Version: 203.2 - SDK 10.9
    iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
    Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
    fbplugin_1_0_3: Version: (null) Support
3rd Party Preference Panes:
    Adobe Version Cue CS4 Support
    Akamai NetSession Preferences Support
    Flash Player Support
    Growl Support
Time Machine:
    Skip System Files: NO
    Auto backup: YES
    Volumes being backed up:
        Marshmallow: Disk size: 232.09 GB Disk used: 115.65 GB
    Destinations:
        Patrice [Local] (Last used)
        Total size: 465.44 GB
        Total number of backups: 42
        Oldest backup: 2012-07-09 21:31:08 +0000
        Last backup: 2014-04-28 23:46:05 +0000
        Size of backup disk: Adequate
            Backup size 465.44 GB > (Disk used 115.65 GB X 3)
    Time Machine details may not be accurate.
    All volumes being backed up may not be listed.
Top Processes by CPU:
         5%    WindowServer
         3%    plugin-container
         1%    firefox
         0%    ps
         0%    Dropbox
Top Processes by Memory:
    381 MB    firefox
    86 MB    plugin-container
    51 MB    Finder
    39 MB    WindowServer
    33 MB    softwareupdated
Virtual Memory Information:
    30 MB    Free RAM
    548 MB    Active RAM
    523 MB    Inactive RAM
    363 MB    Wired RAM
    1.04 GB    Page-ins
    151 MB    Page-outs

Any Suggestions for CGI Script for Web Slide Slow?

Do you have any suggestions for creating a slideshow for my web site, 6 same-size jpgs that rotate automatically?
I think I prefer a cgi script. However, I've tried two that don't work on Firefox or Safari. One developer tells me that he can see the rotating photos.
I'm also open to software to create this. However, I'd prefer to use html code.
Of course, it must work cross platform.
Any suggestions?
G5 Quad; Mini Mac; PowerBook G3; iPods Mac OS X (10.4.8) Using Dreamweaver 8

Oh, what a beautiful baby! Is he/she yours?
She is mine. At least that's what the Mrs. tells me!
When you say gif, I am assuming that you mean the
format really must be gif and not jpg. Is that
correct?
Yes, the file is a GIF file. It's actually an animated GIF file, meaning that the images that you see are all frames of animation in a single GIF file. There are a lot of apps out there that can create animated GIFs. I happen to use Adobe ImageReady because that is what is on the hard drive.
Can you give me a hint about the dithering issue? Do
I dither or not dither, that is the question.
This is the major downside of the GIF format. It is a really old format...from back in the CompuServe bulletin board days...maybe older. Anyways, it is my understanding that GIFs can only hold information for 256 colors....any 256 colors, but no more and no less. So now in the days of "millions of colors" jpegs, you can imagine that a 256 color palette is limiting. But if the colors of your images are sufficiently close, its possible that 256 colors makes for perfectly acceptable images across all images. This is the one variable of converting images to GIF that can make it or break it for you. If your image has a pretty broad tonal range...like fleshtones or any other gradient...then 256 colors is going to represent things poorly. Then you will get dithering artifacts which is like averaging errors...colors are close...as close as possible...but not close enough to make a smooth gradation. Anyways, that's my layperson's understanding.
But for some images, it looks just fine.

Any suggestions for backing up a macbook? I think it's a Mac OX X v10.6?

Do you have any suggestions for backing up. I do not currently have a way to back up my laptop. I read many bad reviews for time machine. Is their a cheaper way to back up laptop (I assume it wouldn't be wireless like time machine)?

Time Machine works. It's free (except for the external disk you need to store the backup on!).
You may be confusing Time Machine (the backup program builtin to Leopard and Snow Leopard) with the Time Capsule, an Apple wifi router with a hard drive built in.
Either way, remember that people only come here when they have problems - so you'll see people complaining about Time Machine not working, because they don't post when things just work.
I use Time Machine for all my Macs. Works really, really well.
Additionally, I also use Carbon Copy Cloner (donationware) to make occasional copies of my boot disks.

Cannot display the screen of the macbook on TV. OS is Lion 10.7.2. Connection to the TV is over HDMI cable. TV shows only the backgroud picture of Lion. Do you have any suggestions for help ?

Cannot display the screen of my macbook on TV. OS is Lion 10.7.2. The Macbook is connected to the TV is over HDMI cable. TV shows only the backgroud picture of the Lion OS and reacts even to mission control. Do you have any suggestions for help ?

You have the display set in Extended Desktop mode. In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen. You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
Or if you want to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box.

Any suggestions for improving my efficiency?

These are the two methods I've come up with to use what I have for making movies. One is for DVDs. The other is for making QuickTime MOV files for CDs. This is the process I have to use because we don't yet have our digital video camera that is firewire compatible with Final Cut.
For DVDs that will play in DVD players or media software on your computer:
1. I take the Video_TS folder and run it through DVD Imager (free, macupdate.com) which converts it into an IMG file.
2. I use the Apple Disk Utility (part of OS X) and burn the IMG file to a DVD.
Simple enough.
Making our recorded footage editable in Final Cut and then exporting as a QuickTime movie is a little more complicated. There may be a simpler way to do all this (like get a fire-wire FC-compatible camera I can capture footage from) but this is the process I finally got to work:
1. In the Video_TS folder are two VOB files. The larger one is the one that actually has your video on it. I use MPEG Streamclip (free, squared5.com) to remove the timebreaks (otherwise all you get is the poster frame) and convert it to a Quicktime MOV file. For settings, I just use Apple Video, 720x480 NTSC, and 30 fps. You need to buy the Apple Quicktime MPEG-2 Playback Component ($20, apple.com) for this free software to work.
2. Import the MOV file into Final Cut (I use Express which is $300 from apple.com) and do your editing and other yumminess. You'll need to render it first.
3. Export as an MOV file ... there's no .mov extension and the Info says it's a Final Cut Express Movie file, not a QT MOV which makes me nervous so I I open it in QuickTime Pro ($30, apple.com) and export it using the Movie to Quicktime Movie setting.
4. Then I burn my Quicktime movies to a CD.
Any suggestions for improving my efficiency?

"For DVDs that will play in DVD players..."
If what you want is just to make copies of a DVD you burned yourself (eg using iDVD or your DVD camcorder) there is a simpler way: just create an image of the DVD on your desktop using Disk Utility, and then burn it using Disk Utility.
You need to go into the process of copying the VIDEO_TS folder only if you want to make changes to it. For example you might need myDVDEdit, a very powerful free editor of the DVD structure (to change the menu button behaviour, or so). Or maybe if the image is of a different size, from a small DVD to a large one.
Piero

I would like to get certified for the SAP Crystal Reports. So, I would like to get some info about the currently available Certification Exams for Crystal Reports (2011/2013). Also, would greatly appreciate if you have any suggestions for thi

Hi,
I would like to get certified for the SAP Crystal Reports. So, I would like to get some info about the currently available Certification Exams for Crystal Reports (2011/2013). Also, would greatly appreciate if you have any suggestions for this Certification Exam preparation materials from another 3rd party or from SAP directly . I would like to prepare or get trained well before taking the exam as I see it costs around $500.
Thanks in advance for your help in this regard!
Sincerely,
J

Please search here.. Training and Certification Shop for your desired certification or training. Don't forget to set your location.
Please use some summarized title for your query.

Any suggestions for an animation program using photographs that can be incorporated into iMovie or Final Cut express?

Similar Messages

Maybe you are looking for