Any suggestions? - optical connection fails to send any signal to hi fi

Analogue out of the airport express ran fine, & then I thought I'd do much better with an optical cable into my cambridge dacmagic!? No signal detected by the dac at all!! I've been checking that the toslink cable works (it does) etc, & had narrowed it down to either the mini-toslink adaptor or optical out of the AE as the source of difficulty. Any ideas?
Thanks, Jim, Melbourne.

I would recommend you to please get in touch with Authorized distributors they will help you.
http://www.xilinx.com/about/contact/authorized-distributors.html

Similar Messages

HT4623 The APP application on my iPad does not function properly - any downloads requested immediately fail and send me back to the main iPad screen. Any suggestions on how to fix this - all software has been updated to iOS 5.1.1 and no other updates are

The APP application on my iPad does not function properly - any downloads requested immediately fail and send me back tot he main iPad screen. Any suggestions on to hoe to fix this? The software has been updated to iOS 5.1.1, and no furthe updates are available.

This is my boilerplate response when app downloads are stalled or in the "waiting" mode. There are a bunch of things here to try.
Tap on the "installing" icon and see if you can pause the install, then tap on it again in order to resume the install.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download and install at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and see if the install resumes.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

Failed to send start signal for complete cluster, SLD may still be stopped.

Hello,
I am trying to create technical systems in the SLD on the portal (http://host:port/sld). It prompts me to start the SLD server by going to Administration.
When I click the button "Start Server" under Administration, I get this following error message:
"Failed to send start signal for complete cluster, SLD may still be stopped on other cluster nodes."
Can you please tell me what has to be done to successfully start the SLD server so that I can go ahead and add technical systems.
Thanks
Srinivas

Hi Siddarth,
I checked MMC. There is only one instance running.
Here is the structure in MMC.
Database
Instance 0
Instance 1
Instances are green and running.
Here is log on the server:
#28 12/12/2008 07:43:44.413 [SAPEngine_Application_Thread[impl:3]_15] FATAL com.sap.lcr.start.StartDirector: SLD start failure, unable to activate the SLD CIMOM. Check the log of the persistence medium for any errors. If the error is reproducible, please send a message to SAP. More...
#27 12/12/2008 07:43:44.397 [SAPEngine_Application_Thread[impl:3]_15] FATAL com.sap.lcr.objmgr.core.TransactionContainerChangeBuffer: Storing changes to cache failed. Please restart the application to reinitialize the cache.(Error: CIM_ERR_FAILED: Failed to initialize cluster notification sender.) More...
#26 12/12/2008 07:43:44.382 [SAPEngine_Application_Thread[impl:3]_15] ERROR com.sap.lcr.cimsrv.ClusterNotificationSender$JMSSender: Failed to initialize cluster notification sender. Please check your JNDI service and JMS provider for errors. More...
#25 12/12/2008 07:43:44.288 [SAPEngine_Application_Thread[impl:3]_15] ERROR com.sap.lcr.webui.CimIO: Failed to send start signal for complete cluster, SLD may still be stopped on other cluster nodes.
#24 12/12/2008 07:43:44.288 [SAPEngine_Application_Thread[impl:3]_15] ERROR com.sap.lcr.cimsrv.ClusterNotificationSender$JMSSender: Failed to initialize cluster notification sender. Please check your JNDI service and JMS provider for errors. More...
What could be the problem.

My iphone wont send mms, any suggestions?, my iphone wont send mms, any suggestions?

my iphone wont send mms, does anyone have any idea how to fix this?

Had same problem. After seeing another post, I disabled an app I was running called "onavo". Did the trick!! If you don't have it, I'd suggest it could be something similar? This was an app that reduced data usage in the background...

After updating iOS on my ipad I can no longer send emails.....I can still receive but not send???any suggestions?

After doing an iOS update on my ipad I can no longer send emails...I can still receive. my settings have not changed but I just can't send???any suggestions?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
The iPad's Mail app has no provisions for creating groups. However, you canuse a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

HT3228 Hi. I got an Apple iPad Air yesterday and quickly set it up. All seemed OK at first. However, I now find that I can send email messages well, but I cannot receive them. Any suggestions? Tony.

Hi. I got an Apple iPad Air yesterday and set it up. All seemed well at first. However I find that I can send emails but I can't receive them on my iPad. Any suggestions?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
The iPad's Mail app has no provisions for creating groups. However, you can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

My iPad 2 will receive Email but will not send it . Any Suggestions ?

I have recently acquired an iPad 2 which I have attempted to set up .
It will receive Email but will not send Email .In outgoing mail I have
SSL turned on and the server Port is 465 . I have previously tried Server Port 993
and Server Port 857 with negative results. Any suggestions ?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Macbook hangs when unlocking only when connected to university wifi. Any suggestions?

So, when I am connected to some university's wifi, It takes longer than a minute to unlock the screen. The process goes something like this when the laptop is connected to university wifi:
1) I click to bring up the password
2) I type in the correct password and press enter
3) I wait for ~75 seconds
4) The screen unlocks
When I am connected to home wifi, or a different institution's wifi, or no wifi
1) I click to bring up the password
2) I type in the correct password and press enter
3) I wait for less than a second
4) The screen unlocks
The fact that I always wait 75 seconds (I just tested it 3 times), leads me to think it might be a timeout for something, but I'm stumped as to what the lock screen could be doing with the wifi!
Any suggestions?

This also happens for any check of my password (e.g. when I try to unlock system preferences). When it does, I am unable to use they keyboard for anything.
I also forgot to mention that my hard disk is encrypted with FileVault.

I can receive email on iphone 4s, but cannot send an email although my server is configured correctly. any suggestions

I can receive email on iphone 4s, but cannot reply or send an email although my server is configured correctly. any suggestions?

iOS:Unable to send or receive mail http://support.apple.com/kb/TS3899

Cannot get mail from yahoo, I have re set it up several times, any suggestions?

I cannot connect to the Yahoo server, any suggestions?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Or this - Delete the account in Mail and then set it up again.
 Cheers, Tom

Charter Cable can't get email on iPad. Any suggestions?

Charter Cable can't get email. Any suggestions?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
The iPad's Mail app has no provisions for creating groups. However, you can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Any suggestions for 3rd party plugins for Cross Dissolve, Film Dissolve & Dip to Black

I am using Cross Dissolve, Film Dissolve & Dip to Black on a premiere project (CS5.5 on Mac).
The results aren't smooth - between some clips, there's a banding on the clip.
I am looking for transitions that look professional like the ones seen in film trailers.
Any suggestions on 3rd party pluings and any other tips would be great help.
Thanks in advance. - renized

Thanks Shooternz & Steven.
Here are the details.
Footage is 4K RED (4096 x 2048) @ 24 fps, Audio 48000 Hz, 24 bit.
Timeline has R3D footage and a few DPX sequences rendered at 4K from After Effects (see below for After aEffects export settings)
Project Settings: MPF GPU Acceleration
Video Display: Timecode
Audio Display: Audio Samples
Sequence Settings: RED R3D 4K 16x9 24 preset.
Video Settings:
Frame Size: 409h x 2048
Frame Rate: 24 fps
Pixel Aspect Ratio: Square pixels (1.0)
Fields: no fields
Audio Settings:
Sample Rate: 48000 samples/second
Export Settings:
Format: MPEG2-DVD
Preset: NTSC Progressive Widescreen High Quality
Video:
Codec: MainConcept MPEG Video
QualityL 5
TV Standard: Automatic based on source
Frame rate: Automatic based on source
Field:order: Automatic based on source
Pixel Aspect ration: Automatic based on source
Render at Max Depth (unchecked) - since render was failing when I checked this.
Bitrate settings:
Bitrate Encoding: VBR 2 pass
Mim BTR: 7
Target BTR: 7.5
Max BTR: 8
M Frames: 3
N Frames: 12
Use Maximum render quality (unchecked) again becuse render failed when checked.
Audio:
Format: Dolby Digital
Codec: Dolby Digital
Frequency: 48khz
Birtate: 448 kbps
After Effects Settings to render DPX sequence:
Output Module:
Format: DPX/Cineon Sequence, Channels :
RGB, Depth: Trillions of colors
Color: PRemultiplied (matted)
Format Options: Cineon Settings
Units: 16-bpc(o-32768)
File Format: DPX)
Please let me know if I missed any inofrmation.
Thanks for taking time to look into this.
renized

When I start my MacBook I get a gray screen, I've tried safe start and it sounds like it's going to start and then shuts down. Any suggestions?

When I start my macbook I get the gray screen and gear. I've tried to safe start it and it sounds like it's going to start but then shuts down. I don't have any other products connected to it. Any suggestions?

Did you recently install any updates?
Do you have your original install discs?
~Lyssa

My iphone 4s without warning has powered off and will not power back up? any suggestions?

My iPhone 4s has just powered down without any previous indication of problems and will not power back up? Any suggestions?

Connect iPhone to Wall Charger for 10 minutes, it may turn ON itself. If still nothing keep on Charger and Reset, hold both home and power buttons for about 20 seconds until the iPhone begins to start.

HT4623 I don't have an option to update my iPad 3rd gen to iOS 7? Any suggestions

I don't have an option to download iOS 7 on my ipad 3rd gen. Any suggestions?

Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch
Make sure you have the Latest Version of iTunes Installed on your computer ( v 11.1)
iTunes free download from www.itunes.com/download

Any suggestions? - optical connection fails to send any signal to hi fi

Similar Messages

Maybe you are looking for