Any suggestions when using PS Elements on iMac?

plan to use PS13 as photo editor, asking if anything I should be aware of with that and my iMac?
thanks,
Don

Many thanks Andaleeb - yes I have tried that and it seems only to add to the confusion - folders which in the Finder clearly show all my images are blank in PSE Organiser with the statement that they still have to be imported into PS Organiser. I guess that may be my fault because, due to the problems in locating files in Organiser I right clicked on them in the Finder and said 'open with PSE'. So in effect I bypassed PSE Organiser. But one would still have hoped that the folder hierarchy would be the same in Organiser and the Finder. Very confusing! I have never seen a program deal with folders etc in the way PSE does.
all the best
Sean

Similar Messages

  • When attempting to use Lightroom external editor program to edit a photo in Photoshop Elements 10, the photo does not open / appear on photoshop elements screen.  I don't have any problem with this when using Photoshop Elements 6 or Photoshop CS.  I'm usi

    When attempting to use Lightroom external editor program to edit a photo in Photoshop Elements 10, the photo does not open / appear on photoshop elements screen.  I don't have any problem with this when using Photoshop Elements 6 or Photoshop CS.  I'm using a Mac with Mountain Lion OS.  Any solutions?

    Adobe now hides the editor - what looks like it is not - you want the editor hidden in the support folder - see http://forums.adobe.com/message/3955558#3955558 for details
    LN

  • When using photoshop elements as editor in iPhoto the pic does not show up when PS opens

    When using photoshop elements as editor in iPhoto the pic does not show up when PS opens

    Ralph9430 offers a good suggestion.  But you may need to do this before taking his advice:
    Check in iPhoto's Preferences (which you can open from the iPhoto menu).  Look in General, and make sure "Connecting Camera Opens" is set to "Image Capture").
    If it is set to "iPhoto", you won't be able to get to Image Capture easily.

  • When phone not muted, why isn't there any audio when using facetime?

    When phone not muted, why isn't there any audio when using facetime?

    What version of iMovie?
    What camera?

  • I upgraded to Lion and then all video clips on for instance Youtube freeze every tenth second to buffer more data. I have a MacBook Pro and never had any problems when using Snow Leopard. Ulf Magnusson, Sweden

    I upgraded to Lion and then all video clips on for instance Youtube freeze every tenth second to buffer more data. I have a MacBook Pro and never had any problems when using Snow Leopard. Has Lion problems with this?
    Ulf, Sweden

    Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
    This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

  • When using mail on my iMac, my folders disappeared.  Using OS X Yosemite v 10.10.1 and Mail v 8.1 How do I get them back?

    When using mail on my iMac, my folders disappeared.  I am using OS X Yosemite v 10.10.1 and Mail v 8.1 How do I get them back?

    The mailbox list is divided into categories with headings in caps, such as ON MY MAC. When you hover the cursor over one of those headings (except for MAILBOXES), you should see the word Show or Hide on the right. Click Show. The  MAILBOXES category can't be hidden.
    In each category, the mailboxes are arranged in groups, such as Inbox. To the left of each group is a small disclosure triangle. If the triangle points to the right, click it so that it points down.

  • I cannot log onto the App Store, the page appears when I call it from the dock or the Apple menu. I can call the log-in box from the menu bar, but on signing in the spinning icon just keeps spinning,(not the beachball). Any suggestions? Using 10.6.7 and u

    I cannot log onto the App Store, the page appears when I call it from the dock or the Apple menu and I can call the log-in box from the menu bar, but on signing in the spinning icon just keeps spinning,(not the beachball).  Using 10.6.7 and up-to-date on all software. Any suggestions?

    Could be a third party app preventing you from being able to login.
    Mac App Store: Sign in sheet does not appear, or does not accept typed text
    If it's not a third party issue, follow the instructions here.
    Quit the MAS if it's open.
    Open a Finder window. Select your Home folder in the Sidebar on the left then open the Library folder then the Caches folder.
    Move the com.apple.appstore and the com.apple.storeagent files from the Caches folder to the Trash
    From the same Library folder open the Preferences folder.
    Move these files Preferences folder to the Trash: com.apple.appstore.plist and com.apple.storeagent.plist
    Same Library folder open the Cookies folder. Move the com.apple.appstore.plist file from the Cookies folder to the Trash.
    Relaunch the MAS.

  • Performance problems when using Premiere Elements for photo slideshows

    Hello,
    I had been using Premiere Elements 9 (PE9) to make a simple slideshow for my parents from their vacation trip and I ran into some serious performance problems.  I had used it to create similar projects before, but not nearly as big.  This one is like 260 photos, so basically it is 260 seperate clips.  I have a POWERHOUSE workstation (see below) so it isn't my PC.  Even when PE9 crashes, looking at my performance monitor my CPU and RAM aren't even halfway being utilized.  I finally switched to Windows Movie Maker of all things and it worked seemlessly, amazing really.  I'm wondering if I was just using PE9 for something other than what it was designed for since there weren't really any video clips, just a ton of photos that I made into video clips, if that makes sense.  Based upon my experience with this so far, I can't imagine using PE9 anymore for anything really.  I might have the need for a more professional video editing program in the near future, although it does seem like PE has a lot of features.  How can I make sure it utilizes my workstation to its full potential?  Here are my specs:
    PC
    Intel Core i7-2600K 4.6 GHz Overclocked
    ASUS P8P67 Deluxe Motherboard
    AMD Firepro V8800 Video Card
    Crucial 128 GB SATA 6Gb/s Solid State Drive (Operating System)
    Corsair Vengeance 16GB (4x4GB) Memory
    Corsair H60 Liquid CPU Cooler
    Corsair Professional Series Gold AX850 Power Supply
    Graphite Series 600T Mid-Tower Case
    Western Digital Caviar Black 1 TB SATA III Hard Drive
    Western Digital Caviar Black 2 TB SATA III Hard Drive
    Western Digital Green 3 TB SATA III Hard Drive
    Logitech Wireless Gaming Mouse G700
    I don’t play any games but it’s a great productivity mouse with 13 customizable buttons
    Wacom Intuos5 Pen Tablet
    Yes, this system is blazingly fast.  I have yet to feel it slow down, even with Photoshop, Lightroom, InDesign, Illustrator and numerous other apps running at the same time.  HOWEVER, Premiere Elements 9 has crashed NUMERUOS times, every time my system wasn't even close to being fully taxed. 
    Monitors – All run on the ATI V8800
    Dell Ultra Sharp 30 inch
    Samsung 27 Inch
    HAANS-G 28 Inch
    Herman Miller Embody Ergonomic Chair (one of my favorite items)

    Andy,
    There ARE some differences between PrE and PrPro w/ an approved CUDA-capable and MPE hardware acceleration-enabled nVidia video card, but those differences show up ONLY in the quality of the Scaling. The processing overhead is almost exactly the same, when it comes to handling the extra pixels.
    As of PrPro CS 5, two things changed:
    The max. size of Still Images went up from 4096 x 4096 pixels, to quite a bit larger (cannot recall the numbers now).
    The Scaling algorithms have been improved, though ONLY with the correct nVidia cards, with MPE hardware support enabled.
    Now, there CAN be another consideration, between the two programs, in that PrPro CS 5 - CS 6, are 64-bit ONLY, so one benefits from the computer and OS to run it. PrE can be either 32-bit, or 64-bit, so one might, or might not, be taking advantage of the 64-bit program and OS. Still, the processing overhead will be almost identical, it's just that the 64-bit OS can spread it around a bit.
    I still recommend Scaling the large Still Images in PS, prior to Import, to keep that processing overhead as low as is possible. Scaled Still Images work just fine, and I have one Project with 3000+ Scaled Still Images, that edits just fine in PrPro, even on my older 32-bit workstation. Testing that same machine, and PrPro some years ago, I could ONLY work with up to 5 - 4096 x 4096 Stills, before things ground to a crawl.
    Now, Adobe AfterEffects handles large Still Images differently, so I just moved that test Project to AE, and added another 20 large Images, which edited just fine. IIRC, AE can handle Still Images up to 10K x 10K pixels, and that might have gone up, as of CS 5.
    Good luck, and hope that helps,
    Hunt

  • When using Photoshop Elements 9 as external editor my iPhoto version does not update

    I am using Photoshop Elements 9 as an external editor in iPhoto V9.4.2
    My photo's are Raw and they open in Elements fine for me to edit. When I go to save or exit I have problems. I get options to choose from - I am assuming that saving them as JPEG now they are edited is the best choice. However it shows me a file location where it will be saved and this is not the iPhoto libary. Even so, I save them where PSE wants to and when I go back to them in iPhoto they are not shown as edited (either in preview thumbnail or full version and regardless of which folder I look at them from). I shut iPhoto down and re-open and still they are not changed. I have watched the Adobe lesson on this and it is identical right up to the point of 'saving'. I have read other question on this and followed some advice but not getting the desired result of showing up in iPhoto still.
    Thank you.

    Are you using PSE and saving the edit as described below?
    Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
    1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    2 - double click on the thumbnail in iPhoto to open it in Photoshop.  When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done. 
    3 - however, if you get the navigation window
    that indicates that  PS wants to save it as a PS formatted file.  You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    NOTE: With Photoshop Elements  the Saving File preferences should be configured as shown:
    I also suggest the Maximize PSD File Compatabilty be set to Always.  In PSE’s General preference pane set the Color Picker to Apple as shown:
    Note:  to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
    OT

  • Script Error when using IE on my iMac

    Thanks to all the people that helped me with my previous problems.
    I have another problem though. When I'm using IE on my iMac, on about 80% of the pages I go to, it'll say "A script error occured. Some scripts on the affected page may not work correctly. Do you want to continue running scripts on the affected page?" then it asks for yes or no, and i choose yes. Some times the page will open correctly, but sites like www.aim.com will only display the background image, but no text. I can't even see any thing on www.apple.com (I'm using my PC right now). Is there some thing I can download to fix this problem? Thanks.

    Internet Explorer is no longer supported on the Mac. There are numerous alternatives like Wacom Mozilla, Netscape, iCab, Opera which are available for Mac OS 8.6.
    You may though find more and more websites which don't work properly on Mac OS 8.6. Disabling Javascript and Java will make many work better, though some buttons and menus may be missing. This is as much a problem of the webmaster not following the good practices of making the website accessible to all people who use it. http://www.anybrowser.org/ has a great website about writing websites following standards that are usable on all browsers, as well as letters you can write webmasters that aren't able to make their website visible on all browsers.
    Some alternative web browsers I've listed on http://www.macmaps.com/browser.html
    I'd add, Mac OS X has much better support of websites than Mac OS 8.6 or earlier, and if you are finding websites you use frequently don't support any Mac OS 8.6 web browser, it may be time for you to upgrade. The G3/233 iMac's maximum operating system is 10.3.9, though you must upgrade its firmware before attempting to install 10.2 or later.

  • Pictures print out dark when using Photoshop Elements

    I am using Photoshop Elements 6.   I pull my pictures up and they look beautiful on the monitor.  However when I print them out they come out much darker.  Has anyone else had this problem.  I even got a new printer because I was told it was probably the problem.  Still have the same issue.

    Donna,
    While you read up on color management (!!!), you may want to check the following:
    Reduce the brightness of your computer screen. The default setting may be sub-optimal.
    In Elements, go to Edit>color settings, and tick the option to optimize for computer screens
    In Elements, open a picture, then go to File>print. Look for "More options", go to the color management tab, and under color handling drop-down, select "printer manages colors"
    Suggest that you print from Editor, not from Organizer.
    HTH

  • Sony MDR-1RBT headphones have crackling or pops in audio when using bluetooth on my iMac - Mountain Lion

    I notice crackling noise or pops when I listen to music using my Sony MDR-1RBT bluetooth headphones with my 3.4GHz Intel Core i7 iMac running  OSX 10.8.5
    I do not hear the crackling when I listen to the headphones using my MacBook Pro 2.7GHz Intel Core i7 with OSX 10.8.5
    I also do not hear the crackling when using wired connection to the headphones.
    So it would seem that something with the Bluetooth on the iMac is the problem. But I have no idea how to troubleshoot this further.
    Does anyone have any ideas what the cause may be?
    I am pretty sure that it is not interference from another device because I can connect to my MacBook Pro in the same area as my iMac with no crackling

    Hi Michael Erb1,
    Thanks for using Apple Support Communities.  It may also be worth resetting the NVRAM of your iMac to see if that helps with the crackling:
    About NVRAM and PRAM
    http://support.apple.com/kb/HT1379
    Cheers,
    - Ari

  • Error Message when using Photoshop Element 9 sending email

    I was using Photoshop Element 9 sending email on Windows Live Mail.
    It was working perfect.
    A week ago, my computer had the problem and need to format and reinstall everything again.
    After that, when I used Photoshop Element 9 to send email using Windows Live Mail 2012.
    It came up error message in below:
    "Elements Organizer could not finish creating your E-mail message.
    Alternatively, you can use the Adobe E-mail Service via the Elements Organizer Preferences dialog."
    I don't want to use Adobe E-mail Service because it is very limited for email function such as attached another files or change email contents.
    Would you please give me some idea how to solve the problem ?
    Thanks,
    Joe

    Please refer the below link:
    http://forums.adobe.com/message/3284248#3284248
    http://helpx.adobe.com/photoshop-elements/kb/freeze-or-error-no-email.html
    -Harshit yadav

  • Any suggestions on using apple TV to display signage in a building

    We have several old flat screens we would like to repurpose in the building for signage. Any suggestions on how we can use apple tv to deliver this content? software requirements?

    The simplest method would be to use the screensaver. Initially you would need to use your computer to create a small photo album with the slides in and share them using homesharing to the Apple TV. The Apple TV is able to hold a small number of photographs in memory and so once you have set this up you don't really need your computer again unless you need to update the slides.
    Selecting a classic slideshow from the screensaver options, will give you access to both simple transitions and the ability to change the slide duration.

  • New GL FAGLB03 Abends when Using WBS Element as Additioanl Characteristic

    Hello All:
    I have added WBS Element as a Total Field to my ledger in FAGLFLEXT and it appears to be working.
    I have also configured it as an Additional Characteristic for displaying line items from New GL Balance Display transaction FAGLB03 however, when trying to drill down to the balance by characterisitc  WBS element, FAGLB03 abends saying that wildcard "*" (the default selection for Additional Characterisitcs on FAGBL03) is not numeric.
    When using tranaction FAGLL03 instead the system works fine and allows me to select by WBS using Dynamic Selection.
    I believe this may be a bug with FAGLB03 but would like to hear from others if they have experienced this or similar issue and/or if they know how I might solve it.
    Thanks!
    Gary

    Hi Amit Agarwal,
    I have a situation now, very similar as yours.
    We wish to get the postings from IVA to Original Cost Objects at JVA.
    Now the system brings just one Cost Object for IVA and all the other lines are without cost object splliting.
    We really need the split and we are with New GL.
    Could you help us?
    Thanks a lot for your help.
    Dante Souza

Maybe you are looking for