Any support for papi in bpm 11g ?

Hi,
Request you to please let me know if there is any equivalent support to PAPI ( Process API in 10 g ) available in BPM 11g ?
thanks

Hi,
You should search the forum. This question has been asked many many times :)
for example in this thread : Supporting PAPI in Oracle BPM 11g ?
Hope this helps.
Kind Regards,
Nils

Similar Messages

  • Is there any support for JDBC

    Hey All,
    I've started working JDBC since few days and already had early hiccups !!!
    I installed Oracle * into my PC and wrote a simple code to connect to the database unfortunately it didn't connect
    Now I am not sure whether there is any support for JDBC in Oracle 8 or not
    I wonder how can I make sure that my Oracle 8 installed supports JDBC or not
    I use Oracle 8 , jdk1.4, and Winxp as my OS
    Messy

    Oracle supports JDBC at least as far back as 8.1.something; the Oracle JDBC driver is built on a private protocol that existed in at least 8.0, so I'd expect all 8x versions to support JDBC, more or less.
    http://www.oracle.com/technology/tech/java/sqlj_jdbc/htdocs/jdbc_faq.html
    http://www.oracle.com/technology/sample_code/tech/java/sqlj_jdbc/index.html
    http://www.oracle.com/technology/software/tech/java/sqlj_jdbc/index.html
    However, you may want to consider using a newer version of the Oracle database; you can download the latest, and a single-user-for-development-only license is free.
    http://www.oracle.com/technology/software/products/database/oracle10g/index.html

  • Is Their Any Support For Data Aware Routing Through The Coherence DataGrid?

    Hi all,
    Following paragraph describes the feature i m looking for(*Data Aware Nodes*)......
    The Function Service can transparently route behavior to one or more nodes in the cluster. In the case of Data Aware Functions, the behavior can be directly routed to the node(s) that hosts the data needed to execute the function in parallel, stream and aggregate the results substantially reducing the time taken to execute complex data intensive tasks.
    So please tell me is their any support for above said question. If this feature is their in coherence please help me with it's configuration and implementation as well.
    Thanx

    Hi JK thank you for your reply
    I want to achieve Data Aware Routing in Parallel Execution (Parallel Function Execution).
    Consider a case where i have three nodes (say Node A,B C) in coherence cluster with partitioned scheme. Now suppose we have Employee related objects stored in cache of Node A and Node C only, but not on Node B. Then i want to perform some operation on Employee objects only in parallel fashion.
    In coherence i ll achieve this using map.invokeAll(collectionKeys, agent);_ from client program.
    Now my question to you is, as my operations are based on Employee objects only which are stored on Node A & c. Then When i request parallel Execution from client program which will connect to Node A from our cluster, will it go to Node B where their is no Employee objects ??????
    Edited by: 981644 on Mar 6, 2013 7:52 PM

  • Is there any support for green screen

    I have a few questions
    -is there any support for green screen?
    -seems like none of the effects can be adjusted like in FCP 7?
    -the audio editing is very limited compared to FCP7?
    seems sooooo much is missing!
    Do you think there is a chance apple will offer a refund?

    Sorry to be annoying, but all of these things have been discussed in other threads here!

  • Any supports for SAP Business connector

    Hello!
    Has anyone knowledge in following areas:
    - Has the SAP Business connector still any supports?
    - What is the procedure to connect Lotus Notes and ERP 2005 (Do we need RFC-connects or RFC/BAPI?)
    - Which support package stack and which kernel version are mandatory for Source Release 4.6c?
    Thank you!
    regards
    Axel

    Hi,
    Fisrt of all pls don't cross post the same question(s) over different forums.
    The BC is still part of NW04s:
    http://help.sap.com/saphelp_nw70/helpdata/en/6f/1bd5c2a85b11d6b28500508b5d5211/frameset.htm
    You don't specfy what you want to do with Notes, so here are some links:
    http://help.sap.com/saphelp_nw70/helpdata/en/28/b7341c0f3e7a4494227dfaa130e520/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/e0/1059d2674d9f43907169400ac6618a/frameset.htm
    Eddy
    PS. Which type of SDN Ubergeek/BPX suit are <a href="/people/eddy.declercq/blog/2007/05/14/which-type-of-sdn-ubergeekbpx-suit-are-you">you</a>?
    Deadline: June 15th

  • Unix:  Any support for creating com objects?

    I'm looking into migrating a CF 8 server from Windows to
    Unix. I see in the documentation for CreateObject that com objects
    are not supported on Unix, "Note: On UNIX, this function does not
    support COM objects."
    Obviously, this won't work on Unix: Note:
    <cfset image = CreateObject( 'com', 'ImageStoreCom.Image'
    )>
    But what about this, can I create a remote com object?:
    <!-- assume '172.0.0.1' is a windows machine with a
    registered com object on it -->
    <cfset image = CreateObject( 'com',
    'ImageStoreCom.Image', 'remote', '172.0.0.1' )
    Finally, if the example above is out of the question, are
    then any techniques for exposing a com object to CF on a Unix box?
    I'm wondering if maybe I could write a Java wrapper for the com
    object and expose it that way?
    Thanks for your help,
    DJ

    <ShotInTheDark>You might try wrapping your COM object
    in a .NET class then accessing your .NET class
    remotely.</ShotInTheDark>
    http://livedocs.adobe.com/coldfusion/8/htmldocs/help.html?content=dotNet_02.html#1160020

  • Any support for SecureSocket on iOS in AIR 3.2?

    Hi there,
    I'm developing an energy metering application where we currently support web browsers running Flash Player 11. The plan is to support the applicaton also on mobile devices and I was glad to see all the improvements in CS 5.5 for targeting both Android and iOS devices. One problem though, we are using the SecureSocket class for secure communication towards a server. Works perfect on Android devices, already with AIR 2.6. However, there doesn't seem to be any support on iOS for SecureSocket. Even with the latest AIR 3.1 release the .isSupported property returns a brutal FALSE when checked.
    Is there any information available on any time schedule for a SecureSocket class for iOS? I'm very much facing a dead end here, I have a perfect solution but can't make it work on the most important mobile platform for our customer (both iPhone and iPad).
    I would appreciate any information you may have in this matter.

    We added DHE support in ASA 8.4.4 (AFAIR) 9.1.2, but it's still not in on Anyconnect even in 3.1, at least the internal enhancement request is not fulfilled.
    If I may know, where is this quesiton coming from? We added Suite-B support to both AC and ASA (and IOS), I have not seen DHE mandated anywhere (granted I have limited visibility).
    http://www.cisco.com/en/US/docs/security/asa/asa91/release/notes/asarn91.html#wp685480

  • Any support for OneDrive like DropBox has for file link storage?

    Trying to add OneDrive to my File Link servers but no support for OneDrive yet. Any plans to add it to ThunderBird?

    Perhaps Microsoft will write an add-on as the community has done for dropbox.

  • Is there any support for Coursebuilder?

    Does Adobe provide any support or updates for the
    Coursebuilder extension?
    Thanks.

    Adobe doesn't own the Coursebuilder extension. When
    Macromedia was
    acquired, Macromedia sold Coursebuilder to Rapid Intake. They
    produced a
    Version 8 extension, but the last time I asked them, they
    were still working
    on the CS3 version.
    They have forums .. and I think there is one for this.
    http://www.rapidintake.com
    Nancy Gill
    Adobe Community Expert
    Author: Dreamweaver 8 e-book for the DMX Zone
    Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
    2003)
    Technical Editor: Dreamweaver CS3: The Missing Manual,
    DMX 2004: The Complete Reference, DMX 2004: A Beginner's
    Guide
    Mastering Macromedia Contribute
    Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
    Web Development
    "StanWelks" <[email protected]> wrote in
    message
    news:ftg8no$97h$[email protected]..
    > Does Adobe provide any support or updates for the
    Coursebuilder extension?
    >
    > Thanks.

  • Can't find any support for my Satellite P875

    Hi,
    I can't find any support about de P875 laptop (PSPLBE-01G00HFR)
    No product found in the support search tool. I just installed windows 8 on this laptop and I'm trying to install drivers but can't find them.
    Thx
    JP

    Win8 support and download page you can find on http://eu.computers.toshiba-europe.com/innovation/windows8_drivers.jsp?service=EU but all drivers, tools and utilities are not released until now.
    Have you used Toshiba upgrade assistant for Win8 installation?

  • Any support for m2ts files?

    It seems this is a common problem with AVCHD, but will there be no support for importing m2ts files?  It sounds like we can import mts files from the camera, but not m2ts files (i.e. those mts files which have been downloaded from the camera to the computer already).  It always seems very silly to me, because who keeps all their video on their camera indefinitely?  Most of my video is m2ts on my computer already, so what I really want is compatibility with these files.  Is this a pipedream?

    Julie Kmoch wrote:
    Thanks for the feedback. I'll take it up with the video team as to whether we can open up to this file extension. In general, our focus is on video from DSLRs rather than camcorders, since that's where the vast majority of our customers are. But the line gets blurry with AVCHD which has a foot in both worlds.
    This is an endlessly tiresome and increasingly common phoned-in reaction from Adobe (in an "answered" thread).  For Adobe's developers to spend the two seconds it takes to include another file extension for recognition of the exact same file format is zero innovation and merely being responsive to a major customer concern.  It has nothing to do with the back-pocket excuse of steering Lightroom to "focus" on photography and less on video, and also nothing to do with the performance/speed/"zippiness" of the application.  Adobe is highlighting its launch of Lightroom 4 with an advertising manifesto that it improves video support (while asking for large upgrade payments).  Mixed messages combined with "we're not focusing on video" is insulting to Adobe's loyal customers.
    Support it, or not.  But if you market the product as supporting but refuse to follow through with zero-innovative fixes, then you are committing commercial fraud.

  • Is there any support for my iphone 3g?

    my iphone 3g is broken for a months ago and is there any doubts for me to send it to apple for fixing?

    Apple does not repair phones, they replace them. If the phone is under warranty and has a defect, they would replace it for free, however with a 3G, being out of warranty, the out of warranty replacement is $149/US. It may be a better idea and cheaper for you to Google a 3rd party repair service in your area that would probably do it a lot cheaper. The advantage to the Apple out of warranty replacement is that it will have a 90 day warranty on it.

  • Waiting to get any support for my filtrering coding problem

    Hi All
    i have post since long time a suggestion on aspnet.uservoice to create a tutorial to teach how we can filter the listview through many dropdownlists and i didnt get any answers even i have post some question on asp.net forum but it same nothing useful. I
    am really looking to send a private message to the Microsoft CEO and hopeful if i can know how i can send to him a message he may give may ask the developer to be more interesting with solving my problem as i am using c# 
    here is my post on uservoice:
    http://aspnet.uservoice.com/forums/228522-show-me-how-with-code/suggestions/6251064-listview-filtering
    and here i have upload a screen shot to explain more what i am looking for
    https://www.youtube.com/watch?v=wtGxymU_IHM&feature=youtu.be

    Hi msimo1,
    This forum is to discuss problems of C# development. Your question is not related to the topic of this forum.Thanks for your understanding.
    Best regards,
    kristin
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • It would appear that there is no longer any support for Acrobat Pro 9 for Mac. I keep getting a notice for updates but when I elect to do so, I get the message that I need to reinstall the program from the original program disks- which I no longer have.

    I’m debating whether to can the app, or just ignore, or turn off the updater. Suggestions?

    If you are at version 9.5.5 that was the end of the line for Acrobat 9.x.  You are correct that Acrobat 9 is no longer supported.  Adobe is only supporting Acrobat X and Acrobat XI at this time.
    If you need to reinstall Acrobat 9 though you can still download the installer bits here:  Download Adobe CS5 Free Trials – All Direct Links without Akamai | ProDesignTools
    Make sure to follow the directions carefully and sign into the Adobe Trials page first with your Adobe ID.

  • Is there any support for Canon 7D s-raw in Aperture 2?

    I'm using PowerBook G4, and I start to use Aperture 2. Aperture 2 supports the raw files, but does not support s-raw and m-raw. Can it be solved?

    You could try the free Adobe DNG converter (Adobe - Adobe Camera Raw and DNG Converter : For Macintosh), if it can convert your D600 raws. Aperture usually works with DNG files created by DNG converter, if the  “Convert to Linear Image” optionis  turned off.

Maybe you are looking for