Any System Update for Ideapad U350 ?

Would like to ask whether is there any system update software for ideapad U350 ? I know there a system update 4.0 for thinkpad, Thanks

Seems to work OK on my system. It did identify two missing drivers and installed them.
The start-up time on the first run was very long 30 seconds or so with the splash screen only.
But it will start and subsequent starts are quicker.
Mats
Thinkpad T400s, X61s, X41, 600

Similar Messages

Im trying to update my ipod but when i go to the general there is no system update for me to click on. How do i update it without it being on there?

Im trying to update my ipod to ios 5 or later and when i go to general to try and update it, there is no system update for me to update it. I bought it used to i dont know if the person before me deleted it or how i go about getting system update back on there in order for me to proceed it the update. Any help would be great.

Note your iPod may not support iOS 5
To update
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes as far as your iPod model allows
iOS: How to update your iPhone, iPad, or iPod touch
A 1G iPod can go to iOS 2.2 via iTunes and iOS 3.1.3 via
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/touchLegacyLandingPage
A 2G to 4.2.1. Requires iTunes version 10.X. If a Mac it requires OSX 10.5.8 or later. With OSX 10.4.11 you can only go to iTunes 9.X which gets you as high as iOS 4.1
A 3G to 5.1.1 Requires iTunes version 10.5 or later
A 4G to 6.1.3 Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
Identifying iPod models

I cannot do a software update, I get as far as System Updates then when I choose it a message appears say "Check for update is not available at this time" but I have not had a system update for a good while now. I am on System version 6.16.211.XT912.Ve

I cannot do a software update, I get as far as System Updates then when I choose it a message appears say "Check for update is not available at this time" but I have not had a system update for a good while now. I am on System version 6.16.211.XT912.Verizon,en,US

Which phone model?

My ipad currently has ios 5.1.1 and won't recognize any available update for ios 6. I have tried on the ipad and connected to itunes and both say up to date. How to I update to ios 6?

My ipad currently has ios 5.1.1 and won't recognize any available update for ios 6. I have tried on the ipad and connected to itunes and both say up to date. How to I update to ios 6?

See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
     Device                                       iOS Verson
iPhone 1                                      iOS 3.1.3
iPhone 3G                                   iOS 4.2.1
iPhone 3GS                                 iOS 6.1.x
iPhone 4                                      iOS 6.1.x
iPhone 4S                                    iOS 6.1.x
iPhone 5                                      iOS 6.1.x
iPod Touch 1                               iOS 3.1.3
iPod Touch 2                               iOS 4.2.1
iPod Touch 3                               iOS 5.1.1
iPod Touch 4                               iOS 6.1.x
iPod Touch 5                               iOS 6.1.x
iPad 1                                          iOS 5.1.1
iPad 2                                          iOS 6.1.x
iPad 3                                          iOS 6.1.x
iPad 4                                          iOS 6.1.x
iPad Mini                                     iOS 6.1.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS to Version 6.0.x from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

HT4623 I have updated my iphone 5 with IOS7. Now there is an update 7.0.2 on my cell and the size of update file is showing around 21.0 MB. I tried to update it ITunes but it seems it is downloading the entire IOS. Is there any separate update for the sam

I have updated my iphone 5 with IOS7. Now there is an update 7.0.2 on my cell and the size of update file is showing around 21.0 MB. I tried to update it ITunes but it seems it is downloading the entire IOS. Is there any separate update for the same or I have to download the entire IOS again?

Well when you download the update with iTunes it will always download the whole new version (in your case 7.0.2) even if its just an bug fix. If you already have 7.0 download the update over-the-air.
You already wrote that the update is only 21 MB, so its not the whole firmware package of 7.0.2 you get with iTunes.

Any official Update for Flex Builder 3 to use Flash Player 10 Api?

Any official Update for Flex Builder 3 to use Flash Player 10
Api?
How can i use flash player's 10 features in flex builder 3?
Thanks

I was able to solve my problem by modifying the solution
offered in
this
technote.
The technote identifies a permissions problem with the
components directory of non-Safari browsers. In my case the
permissions problem appears to have been in the main
/Library/Internet Plug-Ins directory. What tipped me off to the
solution was the fact that after manually removing Flash
Player.plugin and flashplayer.xpt from the /Library/Internet
Plug-Ins directory, subsequent attempts to install Flash Player
resulted in the "Creating file: 1008:5, -5000 Access Denied Error"
I remembered seeing in the technote. Before removing these files,
the installer would just fail silently, perhaps because it saw
files it was going to install already living in the right place,
and furthermore had no permissions to alter the directory.
In any case, by making the permissions change recommended in
the technote to the /Library/Internet Plug-Ins directory, I was
able to install the plug-in, which gave me back access to Flash
content in all my browsers.
Hope this is helpful to someone else...
-Erik

Are there any firmaware updates for time capsule?

Are there any firmware updates for Time Capsule/Time machine?
I just had a new hybrid (SSD and spinning disk) drive (750 GB) installed on my MacBook Pro and used Boot Kamp to partition it and run Windows xp. Now, my previously working Time Machine won't function. It says the "sparsebundle" is open (or in use) preventing the back-up from working properly. When I try and remove and re-install Time Capsule as the disk to back-up to, it still doesn't work. My plan "B" is get a second Time Capsule and dedicate it to the MacBook. But, I fear I'll face the same problem.
When I open to reconfigure Time Machine, the Time Capsule disk is identified as the back-up, but it's also seen in the "available disks to use for back-up" along with with Boot Kamp disk which is part of the new SSD hybrid hard drive just installed. (Remember it's the partitioned part running Windows xp.)
I've unplugged/plugged-in the ethernet internet connection and the power cord many times to no avail. The message still says the sparsebundle is in the way.
Do you think deleting Boot Kamp disk from the list of available hard drives might solve the problem?
Bill in Tulsa

TM can only use AFP and only on disks formatted HFS+ (ie Mac Extended Journaled) so it should not bring up a boot camp partition as a possible destination at all .. but I have not done that seutp.
It says the "sparsebundle" is open (or in use)
That error is well known. It should simply required the TC to be restarted..
That sometimes gets things working where the simple restart won't.
I would recommend using short names, with no spaces and pure alphanumeric.
That is C9
http://pondini.org/TM/Troubleshooting.html
If you have a more complicated setup.. I would recommend firstly doing a TM reset in the computer.
See A4 in the same reference.
Do a verify then of the sparsebundle on the TC.. A5 but you might need to inherit the old backup if you want to continue an old backup.. A new hard disk will make the TM consider the old backup no longer belongs to the computer.. there is a UUID connection to the actual hard disk used in the backup.
Again read the info in pondini. B5 and B6.
The sparsebundle in use is C12 but there are a number of sparsebundle issues in section C.. C17 is another common issue.
Some of what you have done is not adequate.. eg disconnecting ethernet is not enough.. you need to reboot the TC.

HT1222 Are there any security updates for the Mac OS 10.4.11?

Are there any security updates for my G4 PowerPC OS 10.4.11?

No. Tiger is an obsolete and unsupported OS at this point. If there were any updates you would find them using Software Update.

Is there any system variable for this date format 01/21/2004 18:00:32

Hello,
Is there any system variable for this date format 01/21/2004 18:00:32
This is my Internal date format and my External date format is sy-datum.
How can I validate....any suggestions will be apprecaited!
Regards,
Kittu

Hello,
Thank you very much for your response!
My internal date format is 01/21/2004 18:00:32
and external date format on selection-screen is sy-datum.
My external format is stored in S_crtsp
and internal format is stored in L_crtsp. (01/21/2004 18:00:32)
I want to remove the time from the internal format and validate it aginst the external format.
Any suggestions or brief explonation is appreciated...I apprecaite the help soo far...
Regards,
Kittu

Are there any bios updates for my R7950?

the model is: R7950-2PMD3GD5/OC
The serial number is: 602-V276-01SB1203114737
Here is a link to my current bios version: http://puu.sh/27BUd
and for good measure also a screenshot of what gpu-Z gives me:

Hmm just posting my specs in the thread itself may have been a bit to much sticking to the hard facts but yea I would like to know if there is any bios update for my gpu, I have seen quite a few of these threads here before and I would like to see if I could also get a shiny new bios update for my card.

Trying to download latest operating system update for iPhone4. Received error 2001 and now iPhone 4 will not respond. Is there a fix?

Trying to download latest operating system update for iPhone 4. Received error 2001 and now iPhone will not respond. Can anybody suggest a fix?

tried restoring?

Any firmware updates for wrt160Nv2?

i was wondering if there have been any firmware updates for this router. right now my status is Firmware Version: v2.0.02.

Then Firmware on your Router is already the latest one i dont think you Router needs an Firmware upgrade.

System update for enhanced calling. Should I install it?

I had a LGG2 and I did the system upgrade a few months ago and it had screwed my phone up ended up having LG replace the phone. Now I have a system update that had been sent to me on this new phone. I have not installed it yet but it is already causing problems with my phone. It is slow to respond, it keeps turning my volume off on my ringer it freezes,and just shuts off. it started right after the update showed up on my phone. I can't imagine what problems will happen if I do install it. Any thoughts? It is obvious to me the system upgrades for this enhanced calling that is a problem. Any thoughts?

If you haven't installed the updates then your problems wouldn't be the update. I'd install it since it has already downloaded, or download if you haven't already. Honestly, install the update and disable the feature on your phone within the settings menu. Instead of having to go online to configure it, the update allows you to enable disable straight from the menu---settings screen. Try it if you want, it's great when it works, but also re-check your voice mail settings as the first time the update installed it changed my basic VM to basic visual vm. To use advanced calling or visual vm you must have data enabled always.

Are there any software updates for the ipod touch 1st generation?

I can't download any apps I want because the software isn't compatible!

Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

Install optional driver updates from Windows Update for IdeaPad Yoga 13?

Windows Update on IdeaPad Yoga 13 - Windows 8.1 (64-bit) suggests two optional updates:
Conexant - Audio Device - Conexant SmartAudio HD
10.01.2014
Intel Corporation - Graphics Adapter WDDM1.1, Graphics Adapter WDDM1.2, Graphics Adapter WDDM1.3 - Intel(R) HD Graphics 4000
Intel Corporation Graphics Adapter WDDM1.1, Graphics Adapter WDDM1.2, Graphics Adapter WDDM1.3 software update released in May, 2014
04.06.2014
Should I install those updates or should I keep the original drivers?
The original drivers from Lenovo "Drivers and software" section (http://support.lenovo.com/de_DE/downloads/detail.page?DocID=DS032590) seem to be older/outdated:
Conexant Audio Driver for 64-bit Windows
8.65.3.53 10/22/2013
Integrated Graphics Driver for 64-bit Windows
Windows 8.1 (64-bit)
9.17.10.2843 10/23/2012
Intel Video Driver for 64-bit Windows
10.18.10.3282 10/22/2013

Windows Update has now another update for "Intel Corporation Graphics Adapter WDDM1.1" and still no updates on the Lenovo site.
So I tried the the drivers from Windows Update and it seems that every thing is still working fine.

Any System Update for Ideapad U350 ?

Similar Messages

Maybe you are looking for