Any T.codes for Replenished and Non-Replenished Inventory Stock/Value ??

Hi
Are there any T.codes for getting the
1. Replenished Inventory value/stock
2. Non-Replenished Inventory Value/Stock in SAP-MM. ?
Thanks
Maruthi Ram

Hi,
For both you can check with T.Code:MD04, by selecting fields in "Collective access" tab and "filter" fields.
or
try with T.Code: MCBZ by giving different MRP types.
Regards.
Chinna
Edited by: Chinna Veerappa on Jan 23, 2009 5:46 AM

Similar Messages

  • Non valuated inventory stock value

    Dear Gurus
    how to get the value of the non valuated inventory stock, plant wise material wise, though it is being accounted to expenditure at the time of GR itself
    kind regards
    Prasad.J

    HI
    AS THE MATERIAL IS NON VALUATED U CANT GET THE VALUATION OF THE MATERIAL
    SO NO VLAUE OF STOCK CAN BE DETERMINED BY THE SYSTEM FOR THE NON VALUATED MATERIAL
    HOPE U R CLEAR ABOUT WHAT U ASK
    REGARDS
    KUNAL

  • Same tax code to inventorise and non-inventorise the excise

    hi
    My client want to use the same tax code to inventorise and non-inventorise the excise values.
    Requirement is as follows:-
    two plants- plant1 is excisable and plant2 is in excise free zone.
    tax code is T1 - 16 % BED + 2% ECS  + 1% SEcess
    they want to take the cenvat credit in case of plant 1 while doing procurement
    ans want to inventorise the excise on material cost in case of plant 2.
    I suggested them to use two different tax codes in which one is having the non inventorise condition types and other is having the inventorise condition types.
    but they want to use the same tax code
    Is it possible to do this ??
    Regards
    Anin

    Hello Anis,
    Use two different Tax code. Let's A for used as dedectable Tax(Convet Benefit)
    A should have Coditions like this 
    Deduct able tax:-
              JMOP    - IN BED Settoff %
              JEC1     - A/P Edu. Cess Settoff
              JSEP     - IN A/P H Ecess Setoff
              JVRD   - A/P VAT RM Deductable
    Also maintain its settoff 100% for all the condition Type.
    JMX1 --     IN: A/P BED setoff
    JEX1 ---      Ecess Setoff Sta
    JHX1     IN: A/P SECess SOTot
    Now for Non-deductable Tax(Inventrised) suppose ur Tax Code B
    B should have condition Like this
    JMIP   - IN BED
    JEC2 - A/P ECESS
    JSEI - H Ecss
    JVRN - Vat
    maintain the percentage in FV12.
    Now for CENVAT benefit, in J1ID, maintain Material And the Plant both for whom you want the benefit
    Hope Solve U !
    Regards,
    Pardeep Malik

  • Is there any transaction code for Report Designer,Query Designer and WAD

    HI Gurus,
    please tell me s there any transaction code for
    1 Report Designer
    2 Query Designer
    3 WAD
    Thanks in advance
    Prashant

    Hi Prashant,
    We don't have any Transaction Codes for these.
    Since these are installed along with the SAPLOGON BI components, it cannot be called using a standard transaction.
    You have to use only .
    Goto Start -> Programs -> Business Explorer -> Web Application Designer/Report Designer/Query Designer.
    Hope it helps.
    Reward with points if helpful.
    Regards
    Hemant Khemani
    Edited by: Hemant Khemani on May 16, 2008 5:39 PM

  • Report for Excisable and Non Excisable vendor

    Hello
    Is there any Std report is there....it can give us the list of Excisable and Non excisable Vendors based on the Perticular Purchase Orgnisation.
    Regards
    sapman man

    Hi
    I do not think in SAP this kind of report is available.
    what you can do , if your vendor master has different  accounting group for Excisable and Non excisable vendor then you can check in standard table of vendor master like LFA1  and LFM1 or create Z report or Query.
    Awaiting your feedback.
    Kishor Rudani

  • Invoice Posting using INVOIC02 Idoc for PO and Non-Po based invoices

    Hi All,
      We have a problem regarding posting Invoices using Idocs.
    We have po and non-po invoices coming frm thirdparty in the form of idoc files.
    We need a clarification whether Invoic02 idoc can handle both Po and Non Po Based invoices or threre are seperate idoc types or message types for Po and Non Po Invoices.
    Could any one give some inputs on Partner Profiles also for this senario.
    Please kindly reply as early as possible.
    Regards
    Anil Kumar K

    Hi
      I Got your name from this site.I would be very thankful if you can help me here.I am designing a EDI based invoice LIV.Is it possible to post some charges which are without PO reference but are coming in Vendor Invoices.Is it possible to post these kind of charges with EDI message INOIC01 or we have to post through FI posting.If possible through EDI in which segment of IDOC we will enter these charges with amt.Also is it possible to post credit memo also with EDI
    Thanks
    Sanjeev

  • Is there any transaction code for uploding logo in ALV reports.

    is there any transaction code for uploding logo in ALV reports.

    hi,
    call function 'REUSE_ALV_COMMENTARY_WRITE'
           exporting
                it_list_commentary = t_header.
                i_logo             = 'Z_LOGO'.
    endform.
    Upload Logo for REUSE_ALV_COMMENTARY_WRITE
    For those who wish to upload and use a picture in your ALV abap reports.
    Steps for uploading Logo :-:
    1. Goto the transaction OAER
    2. Enter the class name as 'PICTURES'
    3. Enter the class type as 'OT'
    4. Enter the object key as the name of the logo you wish to give
    5. Execute
    6. Then in the new screen select Standard doc. types in bottom window
    Click on the Screen icon
    Now, it will ask for the file path where you have to upload the logo
    7. Now you can use this logo in REUSE_ALV_COMMENTARY_WRITE
    or
    Import Logo and Background Picture for Reporting
    In this step, you can import a customer-specific logo and a background picture into the R/3 System. These will be displayed in the header area of reports in HR Funds and Position Management.
    From the SPRO:
    HR Funds and Position Management --> Dialog Control --> Customize Reporting Interface --> Import Logo and Background Picture for Reporting.
    Activities
    1. Enter the Name of your logo/background picture as an object key in the initial screen.
    2. Make sure that the class name is PICTURES, and the class type is OT.
    3. Choose Execute.
    4. Double-click the document type Picture on the Create tab page. A dialog box will appear in which you can enter the path in which the logo/background picture can be found.
    5. Enter the path and choose Open. The logo will be uploaded into the current R/3 System. If the logo/background picture is to be transported into other systems as well, choose Transport.
    6. Return to the initial screen and repeat the procedure after having entered the Name of your background picture as an object key.
    Please note that the logo/background picture can only be displayed in ALV-based reports with an HTML header. Manually programmed reports such as business distribution plans are not based on the ALV.
    If you have selected several initial objects, ALV-based reports in HR Funds and Position Management will automatically use a hiearchical-sequential display. A logo is not displayed here either. Note also that the logo cannot be printed (see print preview in program).
    Make sure that the logo does not exceed a height of 100 pixels because it would mean that the header of the report will be scrollable.

  • Development of Form for Returnable and Non-returnable material Gate pass

    Dear Experts,
    I am working with an Indian client impementing SAP PM. I need help in developing a form for Returnable and Non Returnable Gatepass. Requirements are below;
    RGP/NRGP should be made for all materials going out of the factory, irrespective of it being coded or not
    It should be plant specific
    It should have reference to material movement document for tracking purpose
    It should have details of vendor, transport company, vehicle number, permits if required, etc
    A Z report should give details of all RGP/NRGP based on material document number and date
    Please guide me based on your experience.
    Thanks,
    Boby

    Boby,
    This can be met. But before developing this, have you implemented the refurbishment process of PM module? This will really help in tracking the equipment and also for the development of RGP/NRGP.
    First you have to create a form for the gate pass  and have to create an enhancement in MIGO for triggering the RGP/NRGP, else you can also create a separate Z transaction code for printing the Gate pass. You will get all the fields like vendor, material, QTY, movement type from the MIGO GI document. 
    For the gate pass the MIGO document will be the reference all the times, you can also develop a Z report for the records for the gate pass.
    Regards,
    Praveen

  • Any sample code for an Extractor to read in a flat file?

    Hi SAP gurus,
    Are there any sample code for an extractor to read in a flat file?
    Are there any documentation on custom coding an extractor to dump
    information into an info source?
    Are there any documentation on the pit falls and contraints using Solution
    Manager, the BI tools, particularly on the Info Source?
    Thanks,
    Steve

    Thanks Muppet Mark
    I forgot to mention that I had also tried just fileObject.read() as well and it didn't work either.  It was the same run on sentence result I got with the script I showed above.  Seems odd.  However, the \r instead of \n did the trick.  I had some recollection of another line feed character but couldn't remember what it was, so thanks for that.
    Doug

  • Example codes for each and every class in API

    hi,
    Is there any place where i can get example code for eacha and every class in java API.
    for eample...if i wanna find sample codes for all the clases in java.lang.*
    please let me know ASAP.
    thanks in advance

    Try this
    http://www.javaalmanac.com/egs/
    It's almost complete, but you could help mr. Patrick Chan to write more samples for the few classes left in the Java API...

  • Any Sample code for recording+playing streaming live video?

    Hi all,
    I'm new to FMS3,
    I wanna create a page for webcam live recording and playing,
    is there any sample code for reference (i can only found the code
    for live recording but do not have live record+play)?
    Many thanks.
    I have installed FMS3.0 and FME2.0 on my machine, so is it
    capable to do so?
    Many thanks.

    Thanks for your reply, but I have another question:
    My live file (test.flv) is recorded under this path:
    C:\xxxx\FMS3\applications\path\streams\_definst_\
    But seems FMS3 can only play video under this path:
    C:\xxxx\FMS3\applications\vod\media\
    My only success is on this source path rtmp://ip/vod/test in
    the component FLVPlayBack.
    So is it happen to all free version of FMS3 or I have to type
    sth more?
    Many thanks.

  • Example code for each and every class in java API

    hi,
    Is there any place where i can get example code for eacha and every class in java API.
    for eample...if i wanna find sample codes for all the clases in java.lang.*
    please let me know ASAP.
    thanks in advance

    Crossposted here: http://forum.java.sun.com/thread.jsp?thread=570264&forum=54&message=2820774

  • Lanuage codes for 'english' and 'english-2' must differ ERROR

    Hello, I'm trying to burn a single layer DVD for a clent of mine and whenever I pressthebuiold/format button a error that states: (lanuage codes for 'english' and 'english-2' must differ) pop up. I have been using DVD studio for some time now and have never ran into this. I don't belive I have changed any settings. anyone have any answers?
    thank you for your time
    Mike

    Hi Mike
    This is a common problem. You've added a second language by mistake and it's the same as the 1st one.
    Look at the bottom of your outline and you'll see "English" and "English-1". Delete "English-1" and re-build.

  • Whenever I go to iTunes with my iPod 5th generation 32 gb iPod Touch, running iOS 8.0.2, It tells me that the "Other" category is using up 14.59 gb of data. I have no clue why it says this and I have searched the internet for fixes and none worked.

    Whenever I go to iTunes with my iPod 5th generation 32 gb iPod Touch, running iOS 8.0.2, It tells me that the "Other" category is using up 14.59 gb of data. I have no clue why it says this and I have searched the internet for fixes and none worked. I have tried on a windows and a mac and noticed no change. I have tried restoring to a backup but that didn't help. I haven't had time to do a full restore but I will try if the problem persists.

    An "other" larger than about 1 1/2 GB indicates corrupted files.
    What is the Other on my iPhone and How to Remove It
    What is "Other" and What Can I Do About It?
    Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
    To restore from backup see:
    iOS: How to back up
    To restore to factory settings/new iPod see:
    iTunes: Restoring iOS software

  • Different segment in same document for leading and non-leading ledger

    Hi,
    Is it possible to have different segments derived in the same document for Leading and Non-leading ledgers.
    Is there an exit where we can substitute the segment originally derived so as to update only in one particular ledger
    Please suggest.

    Thanks Alex for your response.
    But would it be possible to update the segment only in one ledger, the other one carrying the default values coming from profit center?

Maybe you are looking for