Any thoughts on why lion won't load?

Any thoughts on why Lion won't load?

You'll need to give us a little more info to go on.  Are you able to download it from the App Store?  Are you having a problem installing it?  Have you installed it, but are having trouble with it starting?

Similar Messages

  • I have a 7 minute MP3 that I want to edit, however when I drag it into garageband it only pulls in the first 3:30.  Any thoughts on why?

    I have a 7 minute MP3 that I want to edit, however when I drag it into garageband it only pulls in the first 3:30.  Any thoughts on why?  At the 3:30 mark in the song there is a pause but then it starts back up but for some reason the program won't pull in the part of the song beyond the pause.   Thanks!

    Hello npatel1207,
    You may need to increase the duration of the project.
    GarageBand '11: Set the project length
    http://support.apple.com/kb/PH1832
    Cheers,
    Allen

  • Since being in Mexico both my iPad and iPhone seem to be using up their batteries more quickly.  Any thoughts on why that might be?

    since being in Mexico both my iPad and iPhone seem to be using up their batteries more quickly.  Any thoughts on why that might be?

    Did they drink the water? 
    Using the battery level meter in this manner is comparable to using your car's fuel gauge to calculate miles per gallon. The only thing that matters is the total amount of operating time from full charge to auto-shutdown.
    Use the wall-mount charger that came with the iPad or another 10W/12W Apple charger and, one at a time, charge both units overnight.  Do NOT use an iPod/iPhone (5W) charger.  Do NOT use a computer's USB port.  Then, operate it normally until auto shut-down (ignore any low level alerts that may appear).  An irony is that doing that test to determine the total operating time is also the procedure necessary to calibrate the battery level meter.
    I'm not claiming that you do not have a problem.  I am stating, however, that we don't yet know.  If the above test does, in fact, indicate a problem, read this.
    Also, according to Apple:
    Use Your iPad Regularly
    For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
    Elsewhere, Apple elaborates and explains that two half-discharges (or four quarter-discharges, etc.) equals one full discharge.

  • Any one knows why this won´t repair

    Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.

    any one knows why this won´t repair
    Because those messages only indicate that the current software is installed, which includes modifications to those files.
    (47669)

  • ITunes 11 previously imported a video file, which I loaded on to my iPod Nano, but I removed the file from the iTunes library and now it won't (re-)import the same video. Any thoughts on why not?

    iTunes 11 previously imported a video file, which I loaded on to my iPod Nano, but I removed the file from the iTunes library and now it won't (re-)import the same video.
    I'm using 2 PCs, each with video files (.MP4) on their respective hard drives, and also one external drive with other video files on that I move between the two devices.
    iTunes on one PC will (sometimes!) let me add video content from the external hard drive, which is clearly iTunes-compatible, because I can then copy it over to my iPod Nano. On the other PC, I couldn't load that same video from the external hard drive. But if I copied that same video on to the PC's internal hard drive first, then iTunes would let me import it. That was yesterday - now iTunes is refusing to load any files from the internal or external hard drive(s).
    Any thoughts or suggestions, please?

    So I tried copying the files from the external hard drive to a USB drive. I could import the video files from the USB drive!
    So then I tried importing the same files on to my PC's internal hard drive again. I could import the video files from the internal hard drive!
    So then I tried to import the very same files that failed to load on the very same PC previously. I could now import them!
    I still can't import from the external hard drive directly, though.
    I really don't think I like the process of importing things into iTunes very much... any suggestions on what's causing any of this behaviour would be very interesting.

  • Brand new Mac, had to erase drive through disk utility as time machine back up failed. Now disk utility only has the option to install Mountain Lion which my Mac won't allow. Anyone any ideas as my Mac won't load anything up but disc utility!

    Brand new Mac, had to erase drive through disk utility as time machine back up failed on initial setup, USB cable popped out Now can only access disk utility as won't load to log in screen. The only has the option in disc utility is to re-install Mountain Lion which my Mac won't allow or loading another time machine back up but after an hour of it processing, that didn't resolve the issue either! The time machine back up is the latest back up of my Mac Book Pro which was using OS X Maverix. I'm guessing I'm going to have to take my Mac to the store but that would be a hassle so does anyone have any ideas?

    Follow this guide using another Mac.
    Insert your newly created Mavericks USB into you Mac, press the power button and then hold down 'option,' until it gives you an option to boot from the USB. You will then be able to erase the internal disk with Disk Utility and reinstall Mavericks straight after.
    After that you should be able to use Migration Assistant to restore your applications and user data.

  • Any thoughts on why an iMac would be dropping its wifi connection?

    I've got an iMac that seems to be dropping the connection a couple times a day.  Also, when I start the computer from a shutdown state, it also doesn't find the wireless network.  Wish I could point to a cause. Just started happening in the last week or so.  Any thoughts?  Hardware issue?  Software?  Airport?  Similar problems, anybody?  Seems like I recall clearing from preference files in the past when something similar happened.

    you could be suffering from wireless interference.
    perhaps one of your neighbor's wireless networks is interfering with yours. download iStumbler and note the channels other networks in the vicinity are broadcasting on.
    change the channel your network is using as far away as possible from those.

  • Any thoughts on why my iTunes store is not loading images?

    Just started a week ago.  Itunes version is up to date.  Restarted the computer several times.  Macbook Pro.
    There are links there, because when I click on the big blank spots in the middle it takes me to a new page.
    Here's what it looks like:

    Still happening despite resetting the cache and trying other DNS servers.

  • Why Lion won't connect to Non Apple Timemachine servers via AFP...

    so far. Take a look at this. It may go a long way to help folk understand why it's broken.
    I wholeheartedly atribute this to a chap on trick77.com but I can confirm that my set up...
    HP Proliant 4 x 1 TB drives runing Ubuntu 8.04.2 with 4 shares for my Mac stuff under 'afp' and 1 share under 'smb' ,so my wifes Windows work laptop can be backed up. Since update to Lion on main Mini no Time Machine.
    I tried adding the line......uams_dhx_2_passwd.so......in Webmin but it did't work. I am sure a fix will be out soon so for time being I just back up important stuff either to good old cheap DVD discs and a USB drive.
    ==
    AFP network connections to many Linux-based NAS units aren’t working in Mac OS X Lion 10.7 developer preview. After hitting the connect button a message pops up saying:
    The version of the server you are trying to connect to is not supported. Please contact your system administrator to resolve the problem.
    The Time Machine backup feature present in many NAS obviously isn’t working as well because it’s based on AFP too.
    You may say that this is a developer preview, things will change for the final release. That’s obviously true. Source say that this connection problem most likely has to do with Apple discontinuing support for DHCAST128 (or DHX) authentication in Lion because it was considered insecure. Instead, the successor of DHCAST128 should be used: the more secure DHX2 user authentication module. DHX2 is supported since Mac OS X 10.2 and supports up to 256 characters for passwords (**** yeah, that should be enough). It relies on CAST-128 in cipher block chaining mode for encryption.
    I checked my QNAP NAS for available afpd/netatalk UAMs and DHX2 isn’t present, so it most likely wouldn’t work with Lion.
    Well, if it weren’t for Time Machine, I could always resort to SMB.
    [/usr/local/etc/netatalk/uams] # ls -ladrwxr-xr-x     
    1024 Jan 31 23:08 ./drwxr-xr-x     
    1024 Feb 25 20:14 ../lrwxrwxrwx       
    14 Feb 25  2011 uams_clrtxt.so -> uams_passwd.so*lrwxrwxrwx       
    18 Feb 25  2011 uams_dhx.so -> uams_dhx_passwd.so*-rwxr-xr-x    
    10959 Jan 31 23:08 uams_dhx_passwd.so*-rwxr-xr-x     
    5304 Jan 31 23:08 uams_guest.so*-rwxr-xr-x     
    6996 Jan 31 23:08 uams_passwd.so*
    AFP authentication might work if a uams_dhx_2_passwd.so authentication module was present and configured. It may not be a bad idea to raise this issue with your NAS vendor if you plan to use Lion in the near future.
    Rumor has it that some NAS vendors intentionally disable DHX2 in netatalk because it’s a lot more CPU intensive. This could lead to longer login times when accessing AFP shares on NAS’ units with slow CPUs.
    Update 2-26-2011: It has been verified that Lion is able to connect to a Linux host running netatalk 2.1.2 supporting the DHX2 UAM in afpd.
    Update 7-15-2011: See Time Machine support in OS X Lion 10.7.
    ==
    Now we also have to wait for 'Netatalk' stable release to be outed as that should resolve the Ubuntu via Webmin picture..(we hope).
    I tried different work arounds and have reset them all back to what they were and will just have to wait for Apple to address this. Hope this snippet
    gives a little clarity
    Cheers,
    Michael

    Hi Slammer,
    I don't have a Qnap. The info between both == signs is to give an understanding of what’s going on.
    Myself I have a HP Proliant 4 x 1 TB drives running Ubuntu 8.04.2 with 4shares for my Mac stuff under 'afp' and 1 share under 'smb', so my wife’s Windows work laptop can be backed up.
    Now I have got all my connectivity back by using the terminal commands whichis now well documented but here is a good place if doing it on Lion as shown byMember 'ctendell'...
    http://charlestendell.com/os-x-lion-afp-nas-connection-error-fix/
    I can now see my server and everything on it but still no Time Machine backups because you need Netatalk 2.2 to be loaded on the server in my case and millions of others into Ubuntu.
    (The version I am sporting at present is Netatalk 2.03).  This I can do by using Webmin and will do it after the update to Lion due shortly. I could do it now, but I won't.
    I should never have updated to Lion, and do what I have always done, and that was wait until at least 3-4 updates have taken place and review all the discussions on this forum to see if issues have been resolved.
    With regards to DH....Things may have been fixed in the next update which has been seeded and a selectable choice option to use the prior DH....over the new version may be on the cards. The Netatalk latest version is still in beta format though it can be used and has been implemented by NAS manufacturers, but as I understand its due to become  'stable' and no longer in 'beta mode'.
    I dare say that S.Jobs will not want to alienate a huge group so a fix will be the right thing to do but given the mountain of cash they have and most of the revenue coming from iPhones, iPads etc, they may decide not to and of course that means 3rd party fixes.
    Patience is a virtue but Apple sometimes sorely tests it.
    Cheers
    Message was edited by: Michael Wayne for spelling corrections

  • TS1398 i can access my wireless network on every other device EXCEPT my new iPad - any thoughts on why?

    any idea about what's going on and why i can't connect my wireless account to the the "new iPad?"

    Yup that would have worked.

  • Any thoughts on why my page is jumping?

    It seems to be happening when you roll over the drop down menus in IE. http://www.connorsdrilling.com.
    Hoping for a cure!
    Kelly

    It jumps in IE8, but it does not move in compatabilty mode.
    It has something to do with your menu. I saved  your page and changed your css from imports to links and it quit jumping.
    That shouldn't be the problem. I think it has something to do with the widths of your sub menu items.
    Jim

  • Installed Lion, now Iphoto doesn't open. Think I tried all tricks mentioned so far. None seems to work for me. Anybody any thoughts?

    Installed Lion, now Iphoto doesn't open. Think I tried all tricks mentioned so far. None seems to work for me. Anybody any thoughts?

    Installed Lion, now Iphoto doesn't open. Think I tried all tricks mentioned so far. None seems to work for me. Anybody any thoughts?

  • Reading List/Page Won't Load

    Good morning - trying to log in to a website (Facebook), and when I hit "enter" the page goes to reading list but won't log in.  Any thoughts on why it's doing this?  Thanks for any advice.

    There are a lot of files that won't load.
    http://cmweb.pvschools.net/dsmsweb/Site/Students_files/Students.js
    http://cmweb.pvschools.net/dsmsweb/Site/Media/winkingmascot3.gif
    http://cmweb.pvschools.net/dsmsweb/Site/Studentsfiles/shapeimage5.png
    are a few.
    It's either the webpage or the webserver (FirstClass®) that has trouble serving the files. Based on the info [it looks like it favours MSIE|http://cmweb.pvschools.net>.
    Check with FirstClass®.

  • 64-bit plugin won't load

    Hi,
    I have a plug-in that I've compiled in 32-bit and 64-bit versions, and the 32-bit version loads fine in Photoshop 32-bit, but the x64 version fails to load in Photoshop 64-bit.  I saw Jim Watters' thread about this, and added this to my .r file:
    #if defined(_WIN64)
                    CodeWin64X86 { "PluginMainCorrect" },
    #else
    but it still fails to load.  What do I do from here?  I've looked around but can't see any advice on how to track down problems with plug-ins that won't load.  Are there any diagnostic tools which I can use to get more information about why it won't load?
    Thanks
                -Matthew

    Interestingly, the debug version works fine, just not the release version.  I have looked at the projects settings but found nothing significantly different between the two configurations.  Currently we're working around the problem by using the debug version.

  • Bridge won't load.

    CS6 including Bridge works fine on my laptop, but Bridge won't load on my desktop.  Can someone please let me know why Bridge won't load.

    We cannot tell because we know nothing about your system.
    Mylenium

Maybe you are looking for