Any tips for configuring adesklets and yab?

hi,
ive just installed adesklet and yab, a simple but nice launcher.
ive played around with the config file, and got it looking real good, but i cant get it to autostart or sit above other apps or start at the bottom of the screen!
anyone else using it, and achieved these results??
thanks

Laura,
Thanks for your reply.
Its hard for me to explain what went wrong, as I think my steps are incorrect when performing the deployment, and the configuration on the OAS.
Anyway, if possible could you please gimme a complete steps to be performed for the deployment and the configuration at OAS part. What I am looking for is the correct step as to perform which steps first. I tried to look at the documentation however, the documentation is kinda loosely joint to each steps.
By the way, I am very new to JDeveloper and OAS.
If you have the steps, you could email to me at [email protected]
Thanks in advance.

Similar Messages

I have question about hooking up an external hdd to a time capsule and still have my printer hooked up as well. Anyone got any tips for me, how to do it and what brand of harddrive that will work best for me 1 or 2 TB

i have question about hooking up an external hdd to a time capsule and still have my printer hooked up as well. Anyone got any tips for me, how to do it and what brand of harddrive that will work best for me 1 or 2 TB

You just need a powered hub.. if you already use one then fine.
Plug in just about any external hard disk will work fine. Format has to be readable by the TC.. ie fat32.. or much better HFS+.. plug it into a Mac to prepare the drive.
Pick whatever size suits.. nowadays 2TB are most economical.
WD, Seagate have goobled up all the minor players.. so pick one.
Whatever suits your budget and asthetics.
NOTE.. The USB on the TC is fine for printers.. IMHO it is the wrong way to go with USB disks.. use the internal disk of the TC.. USB is less than half the native speed plugged into a Mac.. TC to USB is slow.. far slower than internal drive.. or using external drive as external.

I have a Macbook Pro 15" that is three and a half years old. Although it has slowed a bit, it still runs well and runs every program I need. Any tips for how to keep this old computer running well and in good health?

I have a Macbook Pro 15" that is three and a half years old. Although it has slowed a bit, it still runs well and runs every program I need. Any tips for how to keep this old computer running well and in good health?
I have a 250 gig drive and try to keep at least 100 gigs unused at all times, 4 GB 667 MHz DDR2 SDRAM memory, back up with Time Machine and CrashPlan, and have OS X 10.7.3.
This was my first Mac since an old Apple II GS. After that I used PC's and got really good at reformatting, replacing drives, reinstalling, defragging, resolving software conflicts, etc. Since switching back to Macs (five in my extended family now), I haven't had to do any of those things. So, although, the cost is three times as much, the aggrevation has been ten times less.
I'm retired and living on a fixed income and would therefore like to keep this computer running as opposed to constatntly upgrading.
That said, any tips?
Thanks
It does have a crack on the left of the screen case about 3/4'' up from the bottom. I've posted that as another question.

Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. Drive Genius provides additional tools not found in Disk Warrior. Versions 1.5.1 and later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Adding more RAM, if feasible, and a new, faster hard drive may also help pep it up a little.

The battery for my Macbook Pro 13 "has only 121 cycles and is not charging anymore, my Mac is telling me that it is necessary to exchange it. You have any tips for me to find out what might be happening with my battery?

The battery for my Macbook Pro 13 "has only 121 cycles and is not charging anymore, my Mac is telling me that it is necessary to exchange it. You have any tips for me to find out what might be happening with my battery?

Guys, i am actually trying using a solution provided by the article shared by dominic23,
It says "Another option is to get an ionizer to help the atmosphere in the workplace be more conductive and pull charges away from contact surfaces, including yourself."
So in my home, we have such device that could clean the air using ion, and i am using it in my room...
Result: BANG!!! The electric shock on my macbook has gone!! I don't really care about physics but somehow it works! You guys should give it a try.
Thanks again dominic23

My ipad will not let me slide to log in, or power off. i have tried to hold down the sleep and home button at the same time, but that did not work. Do you have any tips for me? Thanks

my ipad will not let me slide to log in, or power off. I have tried to hold down the sleep and home button at the same time, but that did not work. D o you have any tips for me? Thanks.

recovery mode
open itunes on computer
plug cable into computer not iOS device
turn phone off
hold home button and plug cable into phone. do not release home button until an itunes graphic appears on device.
look to computer should have message about recovery mode click ok and restore
Peace, Clyde
if u need an article see
http://support.apple.com/kb/HT1808

Since backing up my iPad air and installing IOS 8.1.2 the screen doesn't move between landscape or portrait when I turn it. Any tips for getting it to do so?

Since backing up my iPad air and installing IOS 8.1.2 the screen only shows the portrait view and won't change to landscape view when I turn the device. Any tips for getting back both views?

If you see a lock icon in the upper right corner of the screen - then the screen orientation is locked.
Try the side switch above the volume rocker first and see if that unlocks the screen. If that didn't work, swipe up from the bottom of the screen to get to the control center and the lock icon is in the row of icons at the top all the way to the right.
If the screen is unlocked but still will not rotate, reset the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the button

Any tips for novel writing in Pages?

I am determined to finish my next novel in Pages. I can't take the weight of Word any more. Does anyone have any tips for using Pages in this way, producing a manuscript that will probably run to 130k words in the end? I have tried everything in this field on OS X, from Mellel to Nisus, Ulysses and Copywrite, and I think Pages suits me best.
What I have discovered so far...
Good points
Reliability
Ease of use
Speed
The fantastic search and I think unique show search feature which is now my primary way of navigating the manuscript.
Could be better
No keyboard shortcuts for styles
It's simpler to number chapters manually than mess around with lists
The word count is awkward to get at
No outlining or easy navigation by chapters
Occasionally I get red underline spelling errors for words that are spelled correctly. This goes away if I right click and may be due to hyphenation though that is turned off for the document.
G5 dual Mac OS X (10.4.2)

Bodsham,
I started my novel with Nisus, switched to CopyWrite, then wrote the bulk of it with Pages. All in all, using Pages was a terrific experience. But the use of a word processor for a novelist is a very, very personal and subjective thing.
Things a novelist might like about Pages
- What you see on the screen is beautiful -- Pages renders text extremely well
- The system for defining styles is excellent. When I first fired up Pages 1.0, it took me 15 minutes to make a complete manuscript template, including headers
- It's very stable. Unlike Nisus, which was a nightmare (adding blank pages and weird indents all through the document), Pages behaves itself very well
- Plays nice with Word. I'm able to open and export Word docs very successfully
- Brilliant search feature; provides a list of word occurances, then lets you click on them
- Bookmark feature lets you easily jump from chapter to chapter
Things a novelist might not like about Pages
- A few people report a typing lag. If you experience it, it's a significant problem
- Bookmarks, while excellent, won't permanently sort alphabetically -- only numerically. Every time I open my document, my bookmarked list of chapters is sorted incorrectly. Not a big deal; just a minor annoyance
- Very mouse-intensive program. Not a huge issue for a novelist since we mostly just hit a carriage return; not a lot of styles in a text-based manuscript
- Gobbles up a lot of screen real estate. In order to have various inspectors and panes open, it's good to have a larger monitor, otherwise you'll find things sitting on top of your text
I'm sure there are many more strengths and weaknesses, but that'll get you started. By the way, you can download Devon Technologies' excellent and free Word Services that'll add a lot of very useful features (including word count) to your services menu. Get it at http://www.devon-technologies.com/download/index.html
-Dennis

Any tips on setting up and using akai mpk mini in logic 9?

any tips on setting up and using akai mpk mini in logic 9?
Im stuck!!

To really find out in what frequency range the harshness you're describing lives you should enhance it first making it even more harsh and then reduce it with steep EQ bands. Just dialing in some EQ at 3 k because "they say" that's where the harshness lives will not yield satisfying results. I also found that using dynamic EQs which only react above/below a certain level work wonders sometimes compared to static EQs. The harshness might only occur on loud parts but not on soft parts so why dial out the entire frequency range for good making everything sound dead. Sonalksis has some great dynamic tools for this and I use those in almost every project.

Do you know any program for 3d modeling and rendering for Mac?

Do you know any program for 3d modeling and rendering for Mac?

I use MegaPov for 3D-rendering. MegaPov is a Mac version of the free PovRay, a photrealistic renderer. It is perfect, if you like to write animation scripts to program elaborate animations and shading.
If you prefer a GUI to a scripting language you may consider Blender; it is also free.
Rather expensive, but with an elaborate GUI are Maya and Cinema 4D; both are available for the mac.

Hi, I just want to know. If everyday fully charge my iphone, 2 times per day . It's okay for my battery health? Any tips for battery health?

Hi, I just want to know. If everyday fully charge my iphone, 2 times per day . It's okay for my battery health? Any tips for battery health?

See here for battery tips http://www.apple.com/batteries/iphone.html

My iphone 4 lock button does not work, i turned it off using assesive touch, now it wont turn back on? got any tips for fixing this problem!

my iphone 4 lock button does not work, i turned it off using assesive touch, now it wont turn back on? got any tips for fixing this problem!

Hi, braidenwhitesidemate.
Thank you for visiting Apple Support Communities.
I would recommend going through the steps in the article below. If the issue persists, see the section labeled Issue not resolved.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Cheers,
Jason H.

Any charge for free app and issues at Apple Store?

In case we need to create free issues or even apps for iPad (from a non-profit organization), what will the incurred costs be through the whole process?
i.e. From the time of development of issues and the app in which the issues may work - is there any registration or license fees involved, till it reaches all customers - provided the package is for free?
Any charge for free app and issues at Apple Store for iOS apps for iPad?

You must pay the USD$99 fee to join the Individual Developer Program.
After that, there is no fee to put free apps into the iOS App Store.

Hi,I'm a new mac user and happy about it so far. I've heard there is a built in pdf creator in OS X. Any tips for me how to use it?

Any tips on how to create pdf's on my mac will do I've installed Mountain Lion by the way and it's working great!

Go to Print and in the bottom left hand corner is a button "Print to PDF".

Does anyone know any tips for editing video to display on an LED digital billboard?

I was just given a MOV file of a TV commercial they want to display on a digital billboard. It needs to be converted to AVI format.
They said when they tried to translate it to AVI, it looked terrible and they couldn't tell what it was.
They thought I might have better luck since I have Premiere Pro.
I'm a beginner with Premiere anyway, but I also have no experience with digital billboards. I have no idea what settings I should use or anything.
I think it's going to look pixelated anyway, just because that's what LED signs do. Also, the TV commercial is a night scene around a campfire, so that doesn't help.
I asked what company made the sign and they told me ICE and the software used for it is called IView, but I haven't been able to Google anything helpful from ICE so far.
So any tips, tricks or suggestions from anyone who might have previous experience with this kind of thing would be GREATLY appreciated.
Thanks!

OMG! I finally got the sign company's phone number and called their tech support and he was clueless! He didn't even know what a codec was!
All he knew was that the frame rate is 30, pixel matrix is 48 pixels high by 96 pixels wide, and WMV is actually a preferable format to AVI.
But I see WMV also isn't an option in Premiere, so I'm guessing that is also nothing but another container?
Maybe I should just export it to Quicktime and find some free translation software to change it to WMV.

BOM explosion in sales order for configurable materials and variants

Hi,
I have these materials:
A: configurable material (header)
B: variant material (header)
C: configurable material 1 (position)
D: configurable material 2 (position)
E:variant material 1 (position)
F:variant material 2 (position)
I can in the sales order explode in this way the BOM (using SD01 application in the position type of the header material):
1) A --> C+D
2) B --> E+F
while I can't make the explosion in this way: A --> EF and A --> CE
is this possibile? I want to make an explosion of a BOM for a configurable material and having variants material as sons, or having mix sons (one configurable and one variant)
Thank you
Sandra

Hi Sandara,
Just check the BOM in cs03 u have maintained !!! If u have maintain the variant material there in the config mat BOM with object dependencies than u can explode !!!!
Please let me knwo if u any query and also if u elabore more than will help u out

Any tips for configuring adesklets and yab?

Similar Messages

Maybe you are looking for