Any tips on setting up and using akai mpk mini in logic 9?

any tips on setting up and using akai mpk mini in logic 9?
Im stuck!!

To really find out in what frequency range the harshness you're describing lives you should enhance it first making it even more harsh and then reduce it with steep EQ bands. Just dialing in some EQ at 3 k because "they say" that's where the harshness lives will not yield satisfying results. I also found that using dynamic EQs which only react above/below a certain level work wonders sometimes compared to static EQs. The harshness might only occur on loud parts but not on soft parts so why dial out the entire frequency range for good making everything sound dead. Sonalksis has some great dynamic tools for this and I use those in almost every project.

Similar Messages

Using the MPK Mini with Logic Pro

Hi, I got an MPK Mini with Logic Pro.
At first it was working fine but I left it for a couple of weeks but now when I plug it in, Logic doesn't recognise it anymore.
I've read this http://documentation.apple.com/en/logicpro/controlsurfacessupport/index.html#cha pter=1%26section=1 but I still haven't been able to get it working.
Has anyone got any ideas?

Do you have Gear Box? If you do try launching Gear Box then see if it works.
Thunder

Setting up and using a Mac Mini WITHOUT a screen

I use an IMAC, a macBook 15" and an old G4 Powerbook 15".
I have no external screen available and would prefer to avoid the purchase of an external screen.
I am considering to purchase a mac mini to operate my large Itunes library and store my movies. The mini would be installed close to the Stereo and TV, and would mainly be considered a multimedia storage and handling device rather than a computer.
Is it possible to perform the initial set up without the use of an external screen? Or could I connect it to my portable to perform the setup, and later access the device remotely with the WiFi network.
What would happen after I unbox the device, and start it? Would it automatically appear in my list of network devices, ready to be managed and customised via one of my 3 computers?
Your advice would be appreciated.
Patrick

Yeah you're going to need to use a display for the initial setup since sharing is not setup by default so you need to get in there and set that up before you can access it remotely.
Also, the mini was never designed to run "headless" as what you are trying to do is called so you may have to resort to strange hacks like this to keep it happy
http://blackfriarsinc.com/blog/2007/04/how-to-keep-headless-mac-mini-happy
Here's some more good info to know if you want to run the min as a headless server:
http://mrblog.org/2008/03/25/going-green-with-a-mac-mini/
Message was edited by: davi angel

Hi guys. Just a quick question. My wife has a Mac Book Pro and when she is browsing the web she can use a two fingered gesture to go back to her previous page (by swiping from right to left). Is there any way to set that up on my iPad Mini. Many thanks.

Hi guys. Just a quick question. My wife has a Mac Book Pro and when she is browsing the web she can use a two fingered gesture to go back to her previous page (by swiping from right to left). Is there any way to set that up on my iPad Mini. Many thanks.

Not in the Safari browser she can't. That is not supported on the iPad. There are other mobile browsers that do have that functionality - one is iCab Mobile.
https://itunes.apple.com/us/app/icab-mobile-web-browser/id308111628?mt=8

How to set-up and use FAMILY Sharing

Can someone please explain to me in detail how to set-up and use FAMILY Sharing, none of the information I have so far found in the documentation helps at all, in fact it puts you in a constant loop giving the same information over and over again
We have quite a few devices from ipads, iphones and ipods and I need to set-up Family Sharing.
We have our main Apple ID which is linked to our Payment method, I have now got my son a new iPad, I have created his Apple ID and set-up a link via FAMILY Sharing to our main Apple ID.
From what I read we should be able to share our purchased Apps between family members.
So I figured I would be able to get the Apps now via iTunes that are part of the FAMILY Sharing, however when I go into ITunes (latest version downloaded yesterday) I can only see the Home sharing menu item not FAMILY Sharing, so I cannot work out in Itunes how to get Apps that are FAMILY shared. So ok I will try and get Apps directly via the Ipad using the App Store. To test it is working I look for a known paid for App, I then go to download it and it is now asking me to pay for it again.
Can someone please explain to me in detail how FAMILY Sharing is supposed to work and how I get it to work please.
Thanks for your help
Greg

Hey GregWr,
Thanks for the question. The following resources provides some of the best information regarding Family Sharing. Included, you’ll find information on making sure the accounts are set to "Share my purchases”, as well as information on downloading Family Member purchases from the iTunes Purchased section. Please note that some applications are not shareable.
Sharing purchased content with Family Sharing - Apple Support
http://support.apple.com/en-us/HT201085
Which purchased content can I share using Family Sharing - Apple Support
http://support.apple.com/en-us/HT203046
If you don't see your family's shared content - Apple Support
http://support.apple.com/en-us/HT201454
Thanks,
Matt M.

HT204407 my 2 daughters and I are sharing one icloud. I am trying to set up and use find my friends with them, but it won't let me. It says I can't send a request to myself when I send one to her email address, which is different than mine. What am I d

my two daughters and I have iphones. I am trying to set up and use find my friends with them. We have 1 icloud, but different emails. When I send a request it states that I can't send a request to myself. What am I doing wrong

Sharing an Apple ID is never recommended for these reasons.
They can create their own: http://appleid.apple.com and you can add them at the addresses they use for their ID.
Sharing an Apple ID is not recommended because all of your data gets merged and when it gets deleted from one device, it deletes from them all, such as Contacts.
iCloud Guide

How to set up and use AirPlay

How to set up and use AirPlay

Welcome to the Apple Community.
AirPlay; When watching suitable content on the iPad, tap the screen to bring up the controls, tap the AirPlay icon and select the Apple TV. The content will then stream to the Apple TV.
Mirroring; Double tap the home screen button, swipe the application panel to the right, tap the AirPlay icon and choose the Apple TV. The iPad screen will then be streamed to the Apple TV.

How do I set up and use the TV tuner for an ENVY 23 TouchSmart?

How do I set up and use the TV tuner for an ENVY 23 TouchSmart?

Hello LindaLamb:
First thing is connect your coex TV Anti cable to your computer the end connector looks like a bolt. Then open up Windows Media Center go down the list to live tv and follow and fill in your information with wizard . If your computer doesn't have an built in TV Tunner then you will need to purchase an USB TV tunner. http://www.bing.com/shopping/search?q=usb+tv+tunner&qpvt=usb+tv+tunner&FORM=HURE . frrw

Setting up and using International Roaming

Setting up and using International Roaming

Re: Setting up and using International Roaming
I have paid for international travel pack but it is not working. My phone will only go into SOS mode. It is a telstra problem. Not phone problem. The apple shop has narrowed it down to this as.

Is there any way that to install and use firefox remotely on centos 6?

Hello everyone
i rent a dedicated server that using centos 6...I'm going to browse through the internet with that.can anyone tell me, is there any way that to install and use firefox remotely on centos?
(just like utorrent server)
tnx

Install a proxy server on the centos machine and configure your local Firefox to connect through that proxy.
If you really want to run Firefox on the centos machine, install a VNC server instead.
(Obviously, use Google if you don't know what that means ;)

Operating system : I'm using windows vista. is there any way i can download and use illustrator without changing my os?

I'm using windows vista. is there any way i can download and use illustrator without changing my os?

Bluegrassbarry you can download and install Illustrator CS6 from Download CS6 products. Do you currently have a Creative Cloud Membership? If not then I would recommend upgrading your operating system prior to subscribing. You can find the system requirements for Creative Cloud at System requirements | Creative Cloud.

Hi,I'm a new mac user and happy about it so far. I've heard there is a built in pdf creator in OS X. Any tips for me how to use it?

Any tips on how to create pdf's on my mac will do I've installed Mountain Lion by the way and it's working great!

Go to Print and in the bottom left hand corner is a button "Print to PDF".

How to set up and use multiple Ext HD compatible with Windows w/o emulating

I am in deep doodle and confused, sit down and get a cup of coffee cuz is going to be loooooong.
I need some suggestions for my present situation. I have posted a similar question but I only got partial answer and I need to complete this task.
I migrated to my Mac from Windows, and I still have a Windows XP laptop. At first, I formatted my Ext HD as FAT 32 but I noticed that it was too slow. I was suggested to reformat the drives back to Journal. However, recently I had to replace my internal HD and backed up all my data to several Ext. HD. Oh brother what a mistake, while my Mac was at Apple I couldn't get access to my files using my Windows XP laptop because all drives were formatted as Journal (only for Mac).
At the moment, I have the following:
1- Seagate (350 GB orig)- complete back up images 110 GB avail
2- Maxtor ( 500 GB orig) - " " second copy 330 GB avail
3- Old int w/ casing(150 GB orig) 3rd copy 78 GB avail - is working but not sure if it will last, I had this DR for a long time. All 3 DRs formatted as Journal
4- Western Dig 1TB (new FW) 1TB avail
I realized that at the rate that I am shooting I would be running out of space on the current Drives. So I bought 1TB Ext HD FW, but I am in great need from others with more experience than me in setting up a strategy to back up and using my Ext HD. I only use the Int. HD DR 250 GB for Apps only, anything else I use exclusively my Ext HD.
So I would like to know which drive should I use as my primary one, and how I should set up the other subsequent drives as shown above. Do you think that I should reformat all the drives back to FAT 32, (what a task)? I'm also aware the 4 GB limitations. Or should I just format to FAT 32 the 1 TB, and can I partition the this drive and Format each partition with different format,ie. a couple NTFS and one FAT32.
Thanks in advance to all

You can also share a printer between the Mac/PC as well as files and mounted Volumes, see the Tiger articles here
http://www.ifelix.co.uk/tech/
You may want to use Bonjour for Windows on your PC
http://www.apple.com/macosx/features/bonjour/
Then there are VNC clients for Mac/PC that also allow you to actually control the other machine, if they aren't in the same room and you just need to check something quick that can be handy, it's kind of slow though for regular use.
The main benefit of partitioning is being able to have different versions of bootable OS on them. You can try out Leopard on a new partition, while keeping your Tiger partition intact, you can have a XP/Vista partition for parallels or BootCamp, etc... other than that drives are pretty much fast enough, having smaller partitions probably won't realize any significant speed ups over searching the whole large drive.

How to set up and use to Java fax machine

How to setup and use the fax utilies on the c410a allin one smakphoto printer.

Hello @158,
Welcome to the HP forums.
I understand that you would like to know how to setup and use your Photosmart c410 for faxing.
I would like to help.
Setting up the fax requires the phone line to be plugged into Lin -1 on the back of the printer.
There should be a fax setup wizard with your HP Solutions Center.
You can also go into the printers setup menu and setup the fax from the front panel.
Touch the button with teh wrench icon to access the setup menu.
From here select the Basic or Advanced fax setup menu.
You will see your options for rings to answer and other features as you scroll through.
Running the fax setup wizard may be the easier method.
As for sending a fax, that can be found on page 87 of the Users guide.
Fax 1–sided document
a. Load original.
Remove any staples or clips from the original document.
Slide original with print side up into document feeder tray until the product detects the pages.
Slide paper-width guide inward until it stops at edge of paper.
b. Press Start Fax and wait for tone.
c. Enter number
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Where can I go to read about the concept of set-up and use of Key Chain to automatically insert required passwords at internet sites?

Where can I go to read about the concept and use of Key Chain to automatically insert required passwords at internet websites? I may or may not want to use Key Chain after I understand it.

Key Chain basics

Any tips on setting up and using akai mpk mini in logic 9?

Similar Messages

Maybe you are looking for