Any tool to monitor and Troubleshoot existing Voice setup

Dear All,
Please any one assist on below given points
Existing setup facing performance and conference issue :
1>  All of sudden I am facing the problem with conference calls between inter site  as well as intra site, Is there any tool to troubleshoot the same?
2>  Is there any tool to monitor and maintain the Voice setup?
3>  Is there any tool to troubleshoot the every single problems in voice setup(CUCM / Unity connection)?
Every post would be highly appreciate.
Thank's
AT

Cisco has Unified Operations Manager. It has good monitoring capabilities and and some troubleshooting capabilities.
Check out the link below.
http://www.cisco.com/en/US/products/ps6535/index.html
HTH
Sent from Cisco Technical Support iPhone App

Similar Messages

  • What happened to PDF document 22040 – "PIX/ASA: Monitor and Troubleshoot Performance Issues"?

    Hi, does anyone knows what was happened to the following PDF notes in Cisco? The PDF file is only contains 1 page compared to the original notes in html format which is about a few pages.
    If there is alternative link for this document, please let me know. Thanks.
    Document ID: 22040
    PIX/ASA: Monitor and Troubleshoot Performance Issues
    http://www.cisco.com/image/gif/paws/22040/pixperformance.pdf <PDF Notes, but 1 page only?>
    http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008009491c.shtml  < HTML Notes>

    Hi experts / marcin
    can anyone of you let me know about my question related to vpn ?
    Jayesh

  • Enquiry:  Any tool to reverse engineer an existing db schema in Oracle 8i

    Dear All,
    Do you know whether Oracle SQL Developer Data Modeler (3.1.1.703) supports Oracle 8i? If not, is there any tool that can be used to reverse engineer an existing database schema in Oracle 8i?
    Your early reply is appreciated.
    Thanks a lot.
    LAWRENCE CHOW

    That's a pity. The initial version of Data Modeler used to support import from Oracle 8i.
    You could try setting up an ODBC connection to your database and using the JDBC tab (rather than the Oracle tab) when entering the Connection details into Data Modeler.
    Alternatively, if you can get hold of an earlier version of Data Modeler (e.g. version 3.0 or earlier), you could try this (and if it works you could then upgrade your model to the current version).
    David

  • Tools for monitoring and Statistic.

    Hi there
    I am looking for a tool that help me to monitoring and take some statistic from ASA 5500 series, for example:
    monitor the number of connections in use
    monitor the number of tunnels in use
    monitor the number of sessions in use
    monitor throughput, packets and errors on all interfaces of the Cisco ASA
    monitor encrypted traffic throughput
    monitor your firewall’s uptime
    monitor statistics for TCP and UD
    Looking at on the internet I found this tool LogicMonitor somebody knows if this tool is good and reliable???
    Thanks everybody

    Hi,
    You didn't mention if you're looking for a free or licensed tool.
    We use ManageEngine/OpManager as our main monitoring and reporting (NetFlow) tool for our ASAs.
    Sent from Cisco Technical Support iPhone App

  • ACE monitoring and troubleshooting

    HI,
    i am new to the ace and i am asking for some good websites or learning material with
    -ace monitoring, troubleshooting, concepts
    -how to create vips, server farms, real servers
    we also need to be able to track sessions coming from the outside and see if they make it through or break somewhere along the way, is there a debug or logging feature that can help get this info

    I am looking for onlite material, videos, training and white papers for troubleshooting, monitoring and maintaining the ace appliance.  for example, how do I track a session to ensure it's not broken and making it all the way to the real server, etc.

  • Monitoring and troubleshooting in-place distribution point upgrades

    I have a shared SCCM 2007 secondary site server that I'd like to upgrade to a SCCM 2012 Distribution Point. I went to the Administration>Migration>Source Hierarchy>Shared Distribution Points and right clicked and hit Upgrade and then proceeded
    through the Upgrade Shared Distribution Point Wizard. Then under Administration>Migration>Distribution Point Upgrades, monitored that status, but even though I left it overnight, the status is still "Upgrade distribution point." I checked under
    the Monitoring>Distribution Status>Distribution Point Configuration Status and selected the name of my distribution point and noticed that I'd forgotten to add the Site Server's computer account to the local admin group on my Distribution Point Server.
    But even though I've corrected that, the status of the upgrade has not changed and there is nothing of note in resource manager indicating that the process is underway.
    Are there any additional logs to monitor the progress of the in-place Distribution Point upgrade? Are there any other troubleshooting steps I can do to determine why the status of the upgrade isn't complete?

    Hi all
    I would like to share my experience with migrating from SCCM 2007 Distribution Points to SCCM 2012. We have in our test environment 39 secondary site systems with the role of distribution points and I wanted to play with the migration feature "Share
    Distribution Point" scenario. In the night in which I had prepared the Secondary sites using the migration wizard, 30 of the 39 sites completed in approximately 3 hours with the status "Completed upgrade distribution point". On all distribution
    points the same completion date was entered. It seems that a task at specific times in the background check again whether the migration is complete and the status is consolidated. The remaining 9 Distribution Points were then completed almost exactly after
    12 hours.
    I then inquired about the migrated packages. On the night not a single package came in the status 'Targeted'. After about 12 hours I saw at once that now at least the distribution points were recorded in most packages. The status 'Installed' but got no distribution
    point. I then startet at about 10 packages an update distribution job. These then became the status of 'Installed' more than 4 hours later. Then the weekend was between and on Monday morning, no other distribution points were listed as 'Installed'. I checked
    local on the distribution point, if all of the packages was converted. This was the case, not only the 10 I have updated. The packages then should be available during deployments, I think. But I have not tested it.
    If you have looked at a package converted times more precise, the status of most distribution point is 'Unknown'. I then googled for this situation, and I have found this
    article. There seems to be a bug which is currently in a solving process.
    For me, there are two solutions for this problem:
    1. Waiting for the hotfix and the problem is then solved centrally. By the fact, that we migrate the 340 Secodary Sites in 3 weeks, I don't think that this hotfix will be available.
    2. Depending on the number of distribution points and packages it may be helpful if all 'targeted' packages are again updated. In this 'Unknown' status situation I simply do not know if the packages are really available or not.
    I found another problem with the Distribution Point migration. Actually with the migration of SCCM 2007 Secondary Site Server to SCCM 2012 remote Distribution Point, an uninstallation of the secondary site server should be performed. We had tested this with
    SCCM 2012 RTM and it was working at that time. With the update to SCCM 2012 SP1 here again seems a problem with the migration to be added. In the SCCM 2007 environment, the Secondary Site Server were removed during migration. But not local uninstalled, even
    after 3 days.
    Conclusion to the Distribution Point in SCCM 2012 SP1 migration:
    As always, you just have to have patience until the migration jobs are completed. Certain tasks must then be carried out by hand. In my view, the missing log information is the biggest problem. Without the log information I was blind
    during the migration. If you only have a short window for migration and like us, that we need to migrate 340 Secondary Site Server in the production environment, the scenario must be carefully considered. We proof now to not migrate the Secondary Sites with
    the Migration Wizzard, but start from the ground up a new installation of Distribution Points followed by the necessary sync packages.
    Kind regards Stefan Somogyi

  • Monitoring and Alerting tools for Business Object Data Integrator

    Hi,
    We have Business Objects DI installed in AIX 5.3 environment. Please advise any type of monitoring and alerting tools for DI.
    Monitor tools to monitor Job servers(like job service and web services running properly) and also to monitor long running extraction jobs and alerting the same. Thanks.
    Thanks.
    Raj.

    Hi Thomas
    Though both the tools objectives are for Data integration, the purpose for both tools are different.
    SAP BODS/ BOBJ Data Integrator is an ETL tool which involves combining data residing in different sources and providing users with a unified view of the data
    SAP PI is a Middleware/EAI tool which have a mechanism/technology that connects different parts of an application or a series of applications
    SAP BOBJ Data Integrator
    Bulk Data Integration
    Extraction Transformation and Loading
    Deals of huge volume of data
    SAP PI
    It is process based integration of application data
    It is a middle ware which integrates various project applications into a common programming package that can be operate/access as a single application
    SAP NetWeaver PI is SAP’s implementation of Service-oriented Architecture (SOA) middleware and facilitates the integration of business processes that span different departments, organizations, or companies.
    SAP PI uses SAP NetWeaver Application Server and message servers where in fail over cases the messages can be resent again.
    The below differences will gives you more clarity
    Verdict is we can use both the tools for data transfer/migration and for choosing the tool depends upon the business requirement
    Please reply back if you need more information.
    Regards
    Murthy

  • Java 1.4.2 version CPU spike to 100%, require tools to monitor CPU spike

    Hi,
    When using our application CPU is spiked to 100% (Suspecting memory leak here). The Java version used is Java 1.4.2_04. This CPU spike is seen only when more users are logged in (may be around 25 users and more).
    Any tools to monitor the CPU spike (other than perfmon) ? How to nail down the memory leak issue or CPU spike in code perspective.
    Please suggest some tools to do monitoring as well..
    Thanks in Advance.

    It's quite heard to create a memory leak with Java (except from creating objects in a loop or something like that). Perhaps it's only the garbage collector? If you have a memory leak you don't only get a CPU spike, but the VM will exit if the heap space is full.
    I used JProfiler before and it's really good.

  • Advanced monitoring and report feature on ACS5.1

    Hi !
    I would like to know where I can find documentation about the "Advanced Monitoring and Report" feature on ACS server version 5.1.0.44-3. I would like find information about the installation, benefit of this feature, and how to use advanced monitoring and report feature.

    In ACS 5.0 there was a separate licensed feature that enabled additional monitoring and troubleshooting features such as alarms, thresholds and additonal reports. In ACS 5.1 this functionality is included by default as part of the base product

  • Monitoring and performance

    Hi
    Can someone recomend a tool for monitoring and performancetuning of Appserver 8.1 SE running EJB's ?
    We are NOT using HTTP but ORB ie Swing clients.
    TIA
    /JAn

    AppServer 8.1 has pretty good built-in monitoring capabilities. Checkout following article for more info:
    http://developers.sun.com/prodtech/appserver/reference/techart/mgmt_monitoring.html

  • VoIP Monitoring and Management Tools

    Does anyone have suggestion on VoIP monitoring and management tools for large enterprise voip infrastructure?
    We are in the final phase of 8000 phone cut-over across 2 location (2clusters) and need some advice on choosing the right monitoring system.
    I saw Qovia have Cisco approved monitoring tools.
    Does anyone ever use this? any suggestions or advice?
    Thanks in advance
    Bonaldi Kresnanto

    Bonaldi,
    Monitoring voice quality is just one aspect of ongoing operations. It is equally (if not more) important to have the ability to remotely troubleshoot end-user problems, manage configuration changes, and perform active testing on a regular basis before users are impacted.
    In addition, whenever you make changes to your IPT system (e.g. CallManager upgrades/patches, IOS upgrades, power outages) you'll definitely want the ability to verify the system is still operating as design. Using the active tests you can do this easily and in an automated fashion.
    ClarusIPC Operations is the only product that addresses these needs. It is also just as valuable during the deployment as ongoing operations to help you make changes and deploy new phones with the same product you day-to-day.
    I'd like to talk to you more about the product and how it can be used in your environment.
    David Roberts
    [email protected]

  • Can computer expert retrieve deleted videos and photo from and iphone 4 which the photos and video are not sync before? is there any tools or software to retrieve it?

    can computer expert retrieve deleted videos and photo from and iphone 4 which the photos and video are not sync before? Are there any tools or software to retrieve it?

    kimberlyq wrote:
    That means it is possible for sure there is a chance to retrieve back those photos and video.
    No, there are no gurantees. The capabilitty exists to retrive deleted data from an iPhone, but like many things in life it is not 100% successful all the time. Be careful, there are a lot of scam artists out there. They take your money & retrive nothing. This guy is one of the best in the business, but he does not work for people in the private sector. Perhaps he can recommend a service to you. But, as already pointed out, you're looking at thousands of dollars out of pocket whether these folks are successful or not:
    http://www.zdziarski.com/blog/

  • Ask the Expert:Concepts, Configuration and Troubleshooting Layer 2 MPLS VPN – Any Transport over MPLS (AToM)

    With Vignesh R. P.
    Welcome to the Cisco Support Community Ask the Expert conversation.This is an opportunity to learn and ask questions about  concept, configuration and troubleshooting Layer 2 MPLS VPN - Any Transport over MPLS (AToM) with Vignesh R. P.
    Cisco Any Transport over MPLS (AToM) is a solution for transporting Layer 2 packets over an MPLS backbone. It enables Service Providers to supply connectivity between customer sites with existing data link layer (Layer 2) networks via a single, integrated, packet-based network infrastructure: a Cisco MPLS network. Instead of using separate networks with network management environments, service providers can deliver Layer 2 connections over an MPLS backbone. AToM provides a common framework to encapsulate and transport supported Layer 2 traffic types over an MPLS network core.
    Vignesh R. P. is a customer support engineer in the Cisco High Touch Technical Support center in Bangalore, India, supporting Cisco's major service provider customers in routing and MPLS technologies. His areas of expertise include routing, switching, and MPLS. Previously at Cisco he worked as a network consulting engineer for enterprise customers. He has been in the networking industry for 8 years and holds CCIE certification in the Routing & Switching and Service Provider tracks.
    Remember to use the rating system to let Vignesh know if you have received an adequate response. 
    Vignesh might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the  Service Provider sub-community discussion forum shortly after the event. This event lasts through through September 21, 2012. Visit this forum often to view responses to your questions and the questions of other community members.

    Hi Tenaro,
    AToM stands for Any Transport over MPLS and it is Cisco's terminology used for Layer 2 MPLS VPN or Virtual Private Wire Service. It is basically a Layer 2 Point-to-Point Service. AToM basically supports various Layer 2 protocols like Ethernet, HDLC, PPP, ATM and Frame Relay.
    The customer routers interconnect with the service provider routers at Layer 2. AToM eliminates the need for the legacy network from the service provider carrying these kinds of traffic and integrates this service into the MPLS network that already transports the MPLS VPN traffic.
    AToM is an open standards-based architecture that uses the label switching architecture of MPLS and can be integrated into any network that is running MPLS. The advantage to the customer is that they do not need to change anything. Their routers that are connecting to the service provider routers can still use the same Layer 2 encapsulation type as before and do not need to run an IP routing protocol to the provider edge routers as in the MPLS VPN solution.
    The service provider does not need to change anything on the provider (P) routers in the core of the MPLS network. The intelligence to support AToM sits entirely on the PE routers. The core label switching routers (LSRs) only switch labeled packets, whereas the edge LSRs impose and dispose of labels on the Layer 2 frames.
    Whereas pseudowire is a connection between the PE routers and emulates a wire that is carrying Layer 2 frames. Pseudowires use tunneling. The Layer 2 frames are encapsulated into a labeled (MPLS) packet. The result is that the specific Layer 2 service—its operation and characteristics—is emulated across a Packet Switched Network.
    Another technology that more or less achieves the result of AToM is L2TPV3. In the case of L2TPV3 Layer 2 frames are encapsulated into an IP packet instead of a labelled MPLS packet.
    Hope the above explanation helps you. Kindly revert incase of further clarification required.
    Thanks & Regards,
    Vignesh R P

  • Photoshop CS5 problem with missing menu and unable to click any tools

    We have a user who was working on a couple documents. After backgrounding PS, they pulled it back to the foreground, but instead of the Photoshop menus appearing at the top, the tools palettes came up, but the menu at the top still says finder. They are unable to click on any tools or the documents. It's as if PS is unresponsive, but you can click to other apps and the spinning ball is not appearing. Activity monitor reports no hangs as well. We would to be able to save the open files, but are unable to do anything. Choosing to "hide" photoshop from the dock resulted in the documents hiding and now they will not appear again.
    Can anyone point us in a direction that might help?
    Thanks,
    Scott

    ForceQuit and Quit are options, but not a solution. I'm more interested in why it happens and when it happens, how to back out of it.
    I asked if you are offered »Quit« or »Force Quit«. I have never seen them both offered in that pop-up.
    In latter case you have no further options, I’m afraid.
    In the first case you could try quitting all other applications … no guarantees that would help, though.
    As to why it happens:
    How diligent are you with System maintenance, font validation etc. and are third party plug-ins installed?

  • Is there any tools can check for existed database ?

    hi all, is there any tools that can check for that existed database after inserted a database to Ms access??

    Then you'll open a connection and then do a Select from table to retrieve information. (and close afterwards)
    /Y 
    LabVIEW 8.2 - 2014
    "Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
    G# - Free award winning reference based OOP for LV

Maybe you are looking for