Any tool to remove generics ?

hi,
i need a tool to remove generics from my source code.
as far as i know, simply replacing generic patterns with explicit casting will work great. i looked at sun's compiler classes but couldnt find anything useful.
for the curious, i want to write my code by using generics, using 1.5 compiler to its full strength and then remove generics to compile it with 1.4 or an earlier compiler. needless to say i plan to do this by only using generics feature of 1.5. (no enum, autoboxing etc)
but if a tool exist which converts enum autoboxing and other extra features of 1.5 to older versions it will be great to.
thx.
r a f t

using 1.5 compiler to its full strengthThat is a matter of opinion i guess.
and then remove generics to compile it with 1.4 Just write it in 1.4 and save everyone a lot of pain.
</rant>
/k1

Similar Messages

Is there any way to remove the duration from the course outline in Presenter 8?

Is there any way to remove the duration from the course outline in Presenter 8? I would prefer to not have that listed if at all posible and can't find a solution.

Are you talking about the Time Remaining display on the side bar? The text for that field is in the Modify Text Labels... tool in the Theme Editor of Presenter. You can change it to whatever you want, but you may want to keep a record of what the default text labels are, as there is no restore to default option. The Elapsed Time field is what you would want to change. I have seen this modified to show no text, copyright information or other general info.

On an iMac I can't enter any text in safari or Firefox header bar. In all my program's I just have the arrow cursor and can't change to any tools in the tool bars - please help!

I cant type any text in safari or and in all programs i have the arrow cursor and can't change to any tools in the tool bars - please help!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Is there any way to remove timezone dropdown from calendar prompt

We are using a different prompt to set timezone and I was evaluating to see if there is any way to remove timezone drop down from calendar prompt, User will input only time stamp.
Appreciate your help.
Srix

Are you talking about the Time Remaining display on the side bar? The text for that field is in the Modify Text Labels... tool in the Theme Editor of Presenter. You can change it to whatever you want, but you may want to keep a record of what the default text labels are, as there is no restore to default option. The Elapsed Time field is what you would want to change. I have seen this modified to show no text, copyright information or other general info.

Is there any tool like hibernate/ibatis for abap

hi all,
is there any tool like hibernate/ibatis for abap. I want to exactly know whthr there is any object relational mapping tool for abap development.
is object based services a object relational mapping tool ?
thanks in advance
bye
babu

No. Many people use Jasper Reports (http://jasperreports.sourceforge.net/) for their reporting. It's free and opensource. You define your reports in xml and you can create text, html and pdf reports.
You can also try to use html for reporting. I've used it on a project with pretty good results. The benefit is that you probably don't need to learn a new tool/language.
We generated the html using velocity, layout was done using css. You can remove the default headers, footer and page margins added by internet explorer by setting some registry keys:
[HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\PageSetup]
"header"=""
"footer"=""
"margin_bottom"="0.1"
"margin_left"="0.10"
"margin_right"="0.10"
"margin_top"="0.1"

Convert Table to CSS - any tool available ?

Does DW have any tool for converting a table-based page or
template into a CSS-based page?
I have some old generic table-based templates that I'd love
to convert, but I'm a CSS total newbie.
I was thinking that perhaps DW might have a tool or
conversion thing that could help with this.
If DW does not, might you know of any Table-to-CSS conversion
tools out there ?
Many thanks

Well, if I knew, I wouldn't say, so I'm just saying that I
bet it has. :-D
Patty Ayers | www.WebDevBiz.com
Free Articles on the Business of Web Development
Web Design Contract, Estimate Request Form, Estimate
Worksheet
"Murray *ACE*" <[email protected]> wrote
in message
news:[email protected]...
> Ya think?
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> "P@tty Ayers"
<[email protected]> wrote in message
> news:[email protected]...
>>I bet it's been discussed. :-)
>>
>>
>> --
>> Patty Ayers | www.WebDevBiz.com
>> Free Articles on the Business of Web Development
>> Web Design Contract, Estimate Request Form, Estimate
Worksheet
>> --
>>
>>
>>
>> "Murray *ACE*"
<[email protected]> wrote in message
>> news:[email protected]...
>>> Not if I have anything to do with it! 8)
>>>
>>> --
>>> Murray --- ICQ 71997575
>>> Adobe Community Expert
>>> (If you *MUST* email me, don't LAUGH when you do
so!)
>>> ==================
>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>> ==================
>>>
>>>
>>> "P@tty Ayers"
<[email protected]> wrote in message
>>> news:[email protected]...
>>>>
>>>> "Murray *ACE*"
<[email protected]> wrote in message
>>>> news:[email protected]...
>>>>>> If DW does not, might you know of
any Table-to-CSS conversion tools
>>>>>> out there ?
>>>>>
>>>>> There is no such thing. I agree with
Shane....
>>>>
>>>> Shhhh! I wouldn't be surprised if that ended
up in the next version of
>>>> Adobe-weaver. :\
>>>>
>>>>
>>>> --
>>>> Patty Ayers | www.WebDevBiz.com
>>>> Free Articles on the Business of Web
Development
>>>> Web Design Contract, Estimate Request Form,
Estimate Worksheet
>>>> --
>>>>
>>>>
>>>
>>>
>>
>>
>
>

Is there any way to remove artwork from all songs on iPod?

I need to clear all the artwork from my iPod so I can put them back on, as right now they are all mixed up for some reason. Any way to remove all the artwork? I unchecked the display artwork button under my iPod preferences in iTunes preferences, but even after updating the album artwork is still there...

If you are in Windows, you can try this...
Close iTunes.
Go to the folder that contains your music. Select TOOLS then FOLDER OPTIONS from the menu at the top. Pick the VIEW tab. Change the appropriate opttion to "SHOW HIDDEN FILES". Click apply and close...
Now scroll down through your music and you should see files named "Album Art.....". Drag all of them to the trash or some other folder. If you are not sure about all this, just don't empty the trash.
When you run iTunes again, it should not be able to find the artwork. I'm not sure what you would do next but this gives you a start!
Proceed at your own risk. Good luck!

Is there any tool to check whether the proper data is inserting or not?

Hi,
We have different products A,B and C.
whenever user crates an account under these products some X,Y,Z table gets updated.
If user1 creates an account under A then X, Y, Z tables update with some data along with some ID
If user2 creates an account under A then X, Y, Z tables update with SAME DATA along with some other ID
Is there any tool to check whether the proper data is inserting (same data is inserting every time) or not?
p.s : if this thread is not related to this forum .. where can I post?
Thanks,
Praveen

Is there any tool to check whether the proper data is inserting (same data is inserting every time) or not?You need to check the code to see that. Is the update or insert on the table has from different places? In that case it would be better to have them moved to a centralized place may be a package.
If you want to restrict the columns to specific values then you can use constraints.

Is there any tools for move messages from errorqueues in WLS 8.1.5?

Hello!
          I have created a JMSDestination (MyQueue) in my wls 8.1.5.
          I have also created an other JMSDestination (MyErrorQueue) in my wls 8.1.5.
          In the wls it is possible to specify an "Error Destination:" for a JMSDestination. In my wls I have specified MyErrorQueue as error destination for MyQueue.
          If anything goes wrong during consuming message from MyQueue the message will be moved to the error destination MyErrorQueue.
          If this situation ever occur, for eg. there is a cable connection loss or something. The error destination will save me alot of trouble.
          Very nice!
          But now I wonder if there is any tool or function i wls 8.1.5 that helps me move the message back to MyQueue from the error destination, MyErrorQueue, when the problem is solved.? For eg, when the broken cable is replaced.
          Or do I have to write such a application my self? Seems strange since the concept of error destination exists.
          Best regards
          Fredrik

Have a look at this
          http://www.hermesjms.com/confluence/display/HJMS/Home
          We use it and it works very well for handling messages on error queues.
          Some messages we automatically re-queue using a modified version of this
          code here
          https://codesamples.projects.dev2dev.bea.com/servlets/Scarab/remcurreport/true/template/ViewIssue.vm/id/S134/eventsubmit_dosetissueview/foo/resultpos/1/nbrresults/285/action/ViewIssue/tab/2/readonly/true
          Hope that helps.
          Pete
          Fredrik Andersson wrote:
          > Hello!
          >
          > I have created a JMSDestination (MyQueue) in my wls 8.1.5.
          > I have also created an other JMSDestination (MyErrorQueue) in my wls 8.1.5.
          >
          > In the wls it is possible to specify an "Error Destination:" for a JMSDestination. In my wls I have specified MyErrorQueue as error destination for MyQueue.
          >
          > If anything goes wrong during consuming message from MyQueue the message will be moved to the error destination MyErrorQueue.
          >
          > If this situation ever occur, for eg. there is a cable connection loss or something. The error destination will save me alot of trouble.
          >
          > Very nice!
          >
          > But now I wonder if there is any tool or function i wls 8.1.5 that helps me move the message back to MyQueue from the error destination, MyErrorQueue, when the problem is solved.? For eg, when the broken cable is replaced.
          >
          > Or do I have to write such a application my self? Seems strange since the concept of error destination exists.
          >
          > Best regards
          > Fredrik

In the Podcasts app, is there any way to remove the list of recent podcasts that can be downloaded?

Hi there,
I'm wondering whether there's any way to remove all those recent podcasts (either unplayed or only partially played) listed as downloadable from the Podcasts app on the iPhone. If I'd wanted all these additional episodes on the phone, I would have put them there. I don't want them there, yet the app insists upon larding up my podcast lists with these useless episodes. Nor do I want to mark them all as "played." There's a reason some of them are only partially played and others not at all. I prefer to keep them marked that way in my master list. But I do not want them on the iPhone.
I've tried searching online, but am not coming up with a solution. Do I have to go to some third-party app to have cleaner, tidier, and smaller lists? When I intend to carry around only three or four episodes for a given podcast, it is really REALLY annoying to have to pick through a list of forty-some-odd offerings to find the ones I want.
I sure am hoping some techie-inclined soul has a solution for me.
Odile

we are working on server to server APIs that will allow you to fetch data (items) from node.
when that is available you'll be able to get the user list from the UserManager node.

Any tools are there in data upload for other than BDC.

Any tools are there in data upload for other than BDC.

Hi Hassan,
LSMW
<a href="http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf">http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf</a>
Direct Input
<a href="http://help.sap.com/saphelp_di471/helpdata/EN/fa/097174543b11d1898e0000e8322d00/content.htm">Direct Input</a>
BAPI's
Example :
BAPI_QUOTATION_CREATEFROMDATA2 - Customer Quotation: Create Customer Quotation
BAPI_PO_CREATE1 - Create Purchase Order
Close your previous threads if you have got the answers.
Regards,
AS

Are there any tools from NI can generate the pass-through layer (IVI class driver) for IVI class specific driver?

IVI class driver (layer) will provide interchangeable feature for a IVI class specific driver. It would work as a pass-through layer and finally make calls to the IVI class specific driver. Since there could be a lot of functions to be passed through. Are there any tools from NI (Labwindows/CVI or Labview) can do this ?
Thanks a lot.
BTW: the IVI class specific driver interface is generated from Labwindows/CVI tools.

Hi Chris,
Yes, I did. To support interchangability, from my understanding of the IVI specs, there should be another layer IVI-C class driver on top of this IVI class specific driver. As in the IVI‑3.1: Driver Architecture Specification:
Although IVI‑C class drivers export inherent,
base, and extension capabilities, they do not actually implement them. Except
for a few inherent functions and attributes defined exclusively for class
drivers, class driver functions and attributes provide a pass‑through layer to
the IVI‑C specific driver. An IVI‑C specific driver is responsible for
implementing the operations of functions and attributes and for communicating
with the instrument. The IVI‑C specific instrument driver contains the
information for controlling the instrument, including the command strings,
parsing code, and valid ranges of each instrument setting"
So where is this IVI-C class driver and how is it created and communicate with my class specific driver?
Thanks a lot.
Cheers,
IVI‑3.1: Driver Architecture Specification

Are there any tools for optimizing placement of Airport Base Station

I have both a Airport Extreme B/G and a Airport Extreme N unit. I also have several Airport Express units on the network. Does any one know of any tools (Hardware or Software) that can be used to identify the best physical placement of Airport Units in a multi-story building. I need to find where the connections are breaking down and where the dead spots are located. My network works but has random problems and now that I have an Apple TV the problem is worse. If I cluster everything together in one room it works like it should. Once I place the units where I need them it breaks down.
There must be some tools that are available that can assist in the physical placement issue.

You can use something like AP Grapher to determine where wireless network coverage is working well.

Are there any tools for data encryption and decryption ?

Hi,
i am using oracle 9i R2, i want encrypt my data. Are there any tools available in market.
Please let me know the ways to do data encryption and decryption.
Thanks in advance
Prasuna.

970489 wrote:
using DBMS_OBFUSCATION_TOOLKIT.Encrypt /DESEncrypt we can't secure our password...So i am looking for an another alternative.As Blue Shadow said, what are you really trying to achieve?
Encrypting a password is itself not secure. Anything that can be encrypted can be decrypted. That is why Oracle itself DOES NOT encrypt passwords.
Surprised??
Here's what Oracle does with passwords, and what others should be doing if they have to store them.
When the password is created, the presented password - clear text - is concatenated with the username. The resulting character string is then passed through a one-way hashing function. It is that hashed value that is stored. Then when a user presents his credentials to log on to the system, the presented credentials are combined and hashed in the same manner as when the password was created, and the resulting hash value compared to the stored value.

Is their any way to remove headers and footers in numbers 09?

Is their any way to remove headers and footers in numbers 09?

Hi Jeuker,
In Numbers 3.2, you can do lots of things with Page Headers and Footers in Print Preview. Move them to the (paper) edge - if your printer will handle that .
Then bring up the Fonts window (in Print Preview, Menu > Format > Fonts > Show Fonts) and have a play:
Or leave them blank. With zero position on the (paper) page, they will probably be in the non-printing margins anyway .
Regards,
Ian.

Any tool to remove generics ?

Similar Messages

Maybe you are looking for