Any tools support?

I wonders if coherence provides tools like
- First kind, visible tools to do configuration instead of editing xml files, many developers complain for that
- Second kind, change management tools. For the case that a cluster with hundreds of nodes, any changes to the cluster,we have to update every node in the cluster? Seems that not workable:( .
Does OEM provide options for coherence?
Regards,
michael
Edited by: user8024986 on Oct 16, 2008 12:05 AM

Taking Paul's lead: While Oracle has made it easy to get at raw JMX data, it doesn’t offer a visual front end. As deployments expand, users need to see changes in capacity, use and performance across caches spread over many nodes in an intuitive way. To your question: We provide cluster wide heat maps to understand behaviors across all caches at a glance. This is very useful for setting thresholds based on a variety of user-configurable attributes. Configuration changes are automatically captured without having to poll for data or scrape logs. The 24 hour flight recorder allows you to look back in time at node, session, cache and clusters stats, reports and alarms. See http://www.evidentsoftware.com/products/clearstone_live.aspx for more information.
Free trials take only a few minutes to install, and through the use of our own MBEAN server, have virtually no operational impact. You can reach me at 203-966-7202 if you want to speak live.

Similar Messages

What is a delta migration and is there any tool that support delta migration?

Hi,
We are migrating from MOSS 2007 to SharePoint 2013.
What is a delta migration and is there any tool that supports delta migration...Please help me understand.

hi
there are many tools are availabe in market like DocAve,Metalogic-Content migration and Quest Migration
so as per my experince Content Matrix is good to support all the feature while migration form Sharepoint 2007 and Sharepoint 2010 or Sharepoint 2013.
See the below link
http://www.metalogix.com/help/Content%20Matrix%20Console/SharePoint%20Edition/002_HowTo/003_MigrationActions/020_IncrementalCopying.htm
Please mark the answer if this help full..

Is there any tools or supported tools for codes check in/out?

When a project is in a large scale, we usually will divide the system into several modules. Each one responsible for a module. Under such situation, when a programmer tries to modify his/her module code, the problem seems to have less impact. However, in case of development involving common files, I would like to have better control about program update to avoid the conflict of program versions (Just like the Visual SourceSafe supported by Visual Basic) Is there any tool like that?
Thanks for any advise!

Hi,
JDeveloper supports three SCM systems out of the box which provide this kind of functionality:
o Oracle Software Configuration Manager (SCM) is Oracle's own source control system. It's built on the Oracle database so is highly scalable and performs well. It also has a very high level of integration into JDeveloper and has been supported in the product since JDeveloper 3.2. More information here: http://otn.oracle.com/products/repository/content.html
o CVS, probably one of the most commonly used SCM systems around because it's free, open source and very easy to use. There's a very high level of integration for CVS in the 9.0.3 version of JDeveloper. CVS doesn't scale very well to large teams, however. More information: http://www.cvshome.org.
o ClearCase, a popular source control system from Rational Software.
We don't currently support Visual SourceSafe, although we're investigating the best way to provide this in the near future.
Thanks,
Brian
JDev Team (SCM)

Have any development tools support by BEA?

Hi:
I am just learning WebLogic. But I can find any tools for developing EJB.
Does WebLogic is just a J2EE server not include development tools?
Any Advice?
John Lee

Hi John,
IMHO for purposes of learning it's better if you develop
your first EJBs manually, without any IDEs interfering
with the picture. Later, when you have better understanding
if the process you'll be able pick up an IDE that fits your needs.
Regards,
Slava Imeshev
"IVY" <[email protected]> wrote in message
news:3dc1ede7$[email protected]..
>
Hi:
I am just learning WebLogic. But I can find any tools for developingEJB.
Does WebLogic is just a J2EE server not include development tools?
Any Advice?
John Lee

Are there any tools from NI can generate the pass-through layer (IVI class driver) for IVI class specific driver?

IVI class driver (layer) will provide interchangeable feature for a IVI class specific driver. It would work as a pass-through layer and finally make calls to the IVI class specific driver. Since there could be a lot of functions to be passed through. Are there any tools from NI (Labwindows/CVI or Labview) can do this ?
Thanks a lot.
BTW: the IVI class specific driver interface is generated from Labwindows/CVI tools.

Hi Chris,
Yes, I did. To support interchangability, from my understanding of the IVI specs, there should be another layer IVI-C class driver on top of this IVI class specific driver. As in the IVI‑3.1: Driver Architecture Specification:
Although IVI‑C class drivers export inherent,
base, and extension capabilities, they do not actually implement them. Except
for a few inherent functions and attributes defined exclusively for class
drivers, class driver functions and attributes provide a pass‑through layer to
the IVI‑C specific driver. An IVI‑C specific driver is responsible for
implementing the operations of functions and attributes and for communicating
with the instrument. The IVI‑C specific instrument driver contains the
information for controlling the instrument, including the command strings,
parsing code, and valid ranges of each instrument setting"
So where is this IVI-C class driver and how is it created and communicate with my class specific driver?
Thanks a lot.
Cheers,
IVI‑3.1: Driver Architecture Specification

Enquiry: Any tool to reverse engineer an existing db schema in Oracle 8i

Dear All,
Do you know whether Oracle SQL Developer Data Modeler (3.1.1.703) supports Oracle 8i? If not, is there any tool that can be used to reverse engineer an existing database schema in Oracle 8i?
Your early reply is appreciated.
Thanks a lot.
LAWRENCE CHOW

That's a pity. The initial version of Data Modeler used to support import from Oracle 8i.
You could try setting up an ODBC connection to your database and using the JDBC tab (rather than the Oracle tab) when entering the Connection details into Data Modeler.
Alternatively, if you can get hold of an earlier version of Data Modeler (e.g. version 3.0 or earlier), you could try this (and if it works you could then upgrade your model to the current version).
David

Convert Table to CSS - any tool available ?

Does DW have any tool for converting a table-based page or
template into a CSS-based page?
I have some old generic table-based templates that I'd love
to convert, but I'm a CSS total newbie.
I was thinking that perhaps DW might have a tool or
conversion thing that could help with this.
If DW does not, might you know of any Table-to-CSS conversion
tools out there ?
Many thanks

Well, if I knew, I wouldn't say, so I'm just saying that I
bet it has. :-D
Patty Ayers | www.WebDevBiz.com
Free Articles on the Business of Web Development
Web Design Contract, Estimate Request Form, Estimate
Worksheet
"Murray *ACE*" <[email protected]> wrote
in message
news:[email protected]...
> Ya think?
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> "P@tty Ayers"
<[email protected]> wrote in message
> news:[email protected]...
>>I bet it's been discussed. :-)
>>
>>
>> --
>> Patty Ayers | www.WebDevBiz.com
>> Free Articles on the Business of Web Development
>> Web Design Contract, Estimate Request Form, Estimate
Worksheet
>> --
>>
>>
>>
>> "Murray *ACE*"
<[email protected]> wrote in message
>> news:[email protected]...
>>> Not if I have anything to do with it! 8)
>>>
>>> --
>>> Murray --- ICQ 71997575
>>> Adobe Community Expert
>>> (If you *MUST* email me, don't LAUGH when you do
so!)
>>> ==================
>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>> ==================
>>>
>>>
>>> "P@tty Ayers"
<[email protected]> wrote in message
>>> news:[email protected]...
>>>>
>>>> "Murray *ACE*"
<[email protected]> wrote in message
>>>> news:[email protected]...
>>>>>> If DW does not, might you know of
any Table-to-CSS conversion tools
>>>>>> out there ?
>>>>>
>>>>> There is no such thing. I agree with
Shane....
>>>>
>>>> Shhhh! I wouldn't be surprised if that ended
up in the next version of
>>>> Adobe-weaver. :\
>>>>
>>>>
>>>> --
>>>> Patty Ayers | www.WebDevBiz.com
>>>> Free Articles on the Business of Web
Development
>>>> Web Design Contract, Estimate Request Form,
Estimate Worksheet
>>>> --
>>>>
>>>>
>>>
>>>
>>
>>
>
>

Is there any Tool for successfully migrating the Infopaths data connection from old URL to new URL?

Hi Support,
In my Project we are trying to migrate sharepoint 2007 Infopaths to sharepoint 2013 Infopaths(there are some 20000 infopaths).Here we want to change the Data Connection from old to new connection.
So please let me know if there is any tool to migrate sharepoint 2007 infopaths data connection to sharepoint 2013 infopaths data connection.
Thank You in Advance for your help.
Regards,
Pradeep

Hi Pradeep,
As far as I could search, there is no built-in feature to batch updating InfoPath forms, I’d suggest you consider script or third party tool. Here are the links that might help:
http://sharepintblog.com/2011/06/07/updating-infopath-form-templates-and-data-connections-with-powershell/
http://www.dotnetfunda.com/articles/show/2829/migrating-infopath-2007-form-to-2013-forms
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety,
or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Regards,
Rebecca Tu
TechNet Community Support

Any tool to monitor and Troubleshoot existing Voice setup

Dear All,
Please any one assist on below given points
Existing setup facing performance and conference issue :
1> All of sudden I am facing the problem with conference calls between inter site as well as intra site, Is there any tool to troubleshoot the same?
2> Is there any tool to monitor and maintain the Voice setup?
3> Is there any tool to troubleshoot the every single problems in voice setup(CUCM / Unity connection)?
Every post would be highly appreciate.
Thank's
AT

Cisco has Unified Operations Manager. It has good monitoring capabilities and and some troubleshooting capabilities.
Check out the link below.
http://www.cisco.com/en/US/products/ps6535/index.html
HTH
Sent from Cisco Technical Support iPhone App

Any tools available to aid in sync troubleshooting?

I'm coming from a Palm OS phone, and the sync. conduit provided detailed log files of what it did, what got updated where, and what it was in the middle of doing it it got hung up. This was all very helpful...
*My question:* Are there any tools available to aid in troubleshooting iTunes/iPHone sync issues? Any sync. log files that can be reviewed?
I know the typical answer is here: http://support.apple.com/kb/HT1692, but in many cases this does not solve the issue.
Thanks for any pointers....

check this out
http://e-docs.bea.com/wls/docs60/notes/upgrade.html
Kumar
Ram Kumar wrote:
We are planning to migrate to WLS6.1 from WLS5.1. Please let me know if there is
any tool to help convert our properties in weblogic.properties file to config.xml
format.
Thanks,
Ram Kumar

Is there any tool to check whether the proper data is inserting or not?

Hi,
We have different products A,B and C.
whenever user crates an account under these products some X,Y,Z table gets updated.
If user1 creates an account under A then X, Y, Z tables update with some data along with some ID
If user2 creates an account under A then X, Y, Z tables update with SAME DATA along with some other ID
Is there any tool to check whether the proper data is inserting (same data is inserting every time) or not?
p.s : if this thread is not related to this forum .. where can I post?
Thanks,
Praveen

Is there any tool to check whether the proper data is inserting (same data is inserting every time) or not?You need to check the code to see that. Is the update or insert on the table has from different places? In that case it would be better to have them moved to a centralized place may be a package.
If you want to restrict the columns to specific values then you can use constraints.

Is there any tools for move messages from errorqueues in WLS 8.1.5?

Hello!
          I have created a JMSDestination (MyQueue) in my wls 8.1.5.
          I have also created an other JMSDestination (MyErrorQueue) in my wls 8.1.5.
          In the wls it is possible to specify an "Error Destination:" for a JMSDestination. In my wls I have specified MyErrorQueue as error destination for MyQueue.
          If anything goes wrong during consuming message from MyQueue the message will be moved to the error destination MyErrorQueue.
          If this situation ever occur, for eg. there is a cable connection loss or something. The error destination will save me alot of trouble.
          Very nice!
          But now I wonder if there is any tool or function i wls 8.1.5 that helps me move the message back to MyQueue from the error destination, MyErrorQueue, when the problem is solved.? For eg, when the broken cable is replaced.
          Or do I have to write such a application my self? Seems strange since the concept of error destination exists.
          Best regards
          Fredrik

Have a look at this
          http://www.hermesjms.com/confluence/display/HJMS/Home
          We use it and it works very well for handling messages on error queues.
          Some messages we automatically re-queue using a modified version of this
          code here
          https://codesamples.projects.dev2dev.bea.com/servlets/Scarab/remcurreport/true/template/ViewIssue.vm/id/S134/eventsubmit_dosetissueview/foo/resultpos/1/nbrresults/285/action/ViewIssue/tab/2/readonly/true
          Hope that helps.
          Pete
          Fredrik Andersson wrote:
          > Hello!
          >
          > I have created a JMSDestination (MyQueue) in my wls 8.1.5.
          > I have also created an other JMSDestination (MyErrorQueue) in my wls 8.1.5.
          >
          > In the wls it is possible to specify an "Error Destination:" for a JMSDestination. In my wls I have specified MyErrorQueue as error destination for MyQueue.
          >
          > If anything goes wrong during consuming message from MyQueue the message will be moved to the error destination MyErrorQueue.
          >
          > If this situation ever occur, for eg. there is a cable connection loss or something. The error destination will save me alot of trouble.
          >
          > Very nice!
          >
          > But now I wonder if there is any tool or function i wls 8.1.5 that helps me move the message back to MyQueue from the error destination, MyErrorQueue, when the problem is solved.? For eg, when the broken cable is replaced.
          >
          > Or do I have to write such a application my self? Seems strange since the concept of error destination exists.
          >
          > Best regards
          > Fredrik

Any tools are there in data upload for other than BDC.

Any tools are there in data upload for other than BDC.

Hi Hassan,
LSMW
<a href="http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf">http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf</a>
Direct Input
<a href="http://help.sap.com/saphelp_di471/helpdata/EN/fa/097174543b11d1898e0000e8322d00/content.htm">Direct Input</a>
BAPI's
Example :
BAPI_QUOTATION_CREATEFROMDATA2 - Customer Quotation: Create Customer Quotation
BAPI_PO_CREATE1 - Create Purchase Order
Close your previous threads if you have got the answers.
Regards,
AS

Are there any tools for optimizing placement of Airport Base Station

I have both a Airport Extreme B/G and a Airport Extreme N unit. I also have several Airport Express units on the network. Does any one know of any tools (Hardware or Software) that can be used to identify the best physical placement of Airport Units in a multi-story building. I need to find where the connections are breaking down and where the dead spots are located. My network works but has random problems and now that I have an Apple TV the problem is worse. If I cluster everything together in one room it works like it should. Once I place the units where I need them it breaks down.
There must be some tools that are available that can assist in the physical placement issue.

You can use something like AP Grapher to determine where wireless network coverage is working well.

Are there any tools for data encryption and decryption ?

Hi,
i am using oracle 9i R2, i want encrypt my data. Are there any tools available in market.
Please let me know the ways to do data encryption and decryption.
Thanks in advance
Prasuna.

970489 wrote:
using DBMS_OBFUSCATION_TOOLKIT.Encrypt /DESEncrypt we can't secure our password...So i am looking for an another alternative.As Blue Shadow said, what are you really trying to achieve?
Encrypting a password is itself not secure. Anything that can be encrypted can be decrypted. That is why Oracle itself DOES NOT encrypt passwords.
Surprised??
Here's what Oracle does with passwords, and what others should be doing if they have to store them.
When the password is created, the presented password - clear text - is concatenated with the username. The resulting character string is then passed through a one-way hashing function. It is that hashed value that is stored. Then when a user presents his credentials to log on to the system, the presented credentials are combined and hashed in the same manner as when the password was created, and the resulting hash value compared to the stored value.

Any tools support?

Similar Messages

Maybe you are looking for