Any updates and/or patches for Aperture 3.2?

Just wondering if there are any updates and/or patches for Aperture 3.2. Especially for "Detect Edges" mode.

Hi
I don't know if it solves your problem, but version 3.2.1 has been released on last Thursday. You could update and try it.
Regards, Michael

Similar Messages

  • HT1338 Update bundle just released for Aperture 3.4.2, Safari 6.0.2, and iPhoto 9.4.2 will not install.  Keep getting error "The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102)"  Any one else having this issue?  Please help.

    Update bundle just released for Aperture 3.4.2, Safari 6.0.2, and iPhoto 9.4.2 will not install.  Keep getting error "The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102)"  Any one else having this issue?  Please help.

    Hi there!
    Yes, same problem too; I've already sent an email to apple support and just received a very vague and unpractical response with "call apple support in your country" as main advice. I've obviously emailed back stating that I need a clearer response and I don not have any intention to spend money calling for support when updates is a free tool. I do also believe this is a probem generated on Apple's end, I just wish they learned to say "sorry, it's us;  working on it!"
    Message was edited by: MacLuc

  • The new Update with the Patch for Camera Raw is not working. Code U44M1P34

    Hi there,
    i have a problem with the new CC Update - including the patch for Camera Raw 8.7.1
    Error Code: U44M1P34
    Photoshop CC (2014)
    After Effects CC (2014)
    Brisge CC
    The logfile shows 1 fatal error:
    FATAL: Payload 'Photoshop Camera Raw 8_8.7_AdobeCameraRaw8.0All 8.0.0.22 with a number following.
    I have tried to uninstall an reinstall. Did not work at all, because the same Problem is shown.
    I did not install in other folders. All other updates worked - but not this update. The problem seems to bee only caused by the Camera Raw Update.
    Are there others with the same Problem? Any ideas?
    Thanks in advance and Greetings,
    Joerg

    Hi Jeff,
    it seems that i have found a dirty, but working solution for my problem on this site: Getting fatal Exit Code 34 when installing an app
    To change these 3 folder names and reinstalling of my Programs worked fine without any errors:
    Adobe PCD -> Adobe PCDold
    backup -> backupold
    caps -> capsold
    Now the Programs are on the actual status with all updates included and everythings seems to be fine.

  • October CPU and PSU patches for oracle Database and application

    Hi experts,
    Linux-X86_64
    Datbase - 11.2.0.3.0
    Application - 12.1.3
    Can any one provide Patch Number for Cpu and Psu patch numbers for above versions(Oct 2014).
    regards,
    prathap

    You can also refer MOS note:
    Patch Set Update and Critical Patch Update October 2014 Availability Document (Doc ID 1912224.1)
    thanks

  • Since trying to update yesterday, my computer won't download any updates and itunes 11.1 says "Internal Error" and gives me the following info when I click on a song or podcast: Exception Name: NSInvalidArgumentException Description: -[_NSConcreteUserNoti

    Since trying to update yesterday, my computer won't download any updates and itunes 11.1 says "Internal Error" and gives me the following info when I click on a song or podcast:
    Exception Name: NSInvalidArgumentException
    Description: -[_NSConcreteUserNotification activationType]: unrecognized selector sent to instance 0x25a06b0
    User Info: (null)
    0   CoreFoundation                      0x922216fb __raiseError + 219
    1   libobjc.A.dylib                     0x920108db objc_exception_throw + 230
    2   CoreFoundation                      0x9222563d -[NSObject(NSObject) doesNotRecognizeSelector:] + 253
    3   CoreFoundation                      0x9216af77 ___forwarding___ + 487
    4   CoreFoundation                      0x9216ad22 _CF_forwarding_prep_0 + 50
    5   iTunes                              0x00df38e2 iTunes + 14624994
    6   iTunes                              0x00df36ae iTunes + 14624430
    7   libobjc.A.dylib                     0x9201c6c5 -[NSObject performSelector:withObject:withObject:] + 77
    8   Foundation                          0x93c12d85 -[_NSConcreteUserNotificationCenter _sendDelegateMessage:sendToAppDelegate:withNotificationFromMessage:] + 335
    9   Foundation                          0x93c12eaf -[_NSConcreteUserNotificationCenter _notificationPresentedMessage:] + 58
    10  Foundation                          0x93c137c2 __block_global_1 + 156
    11  libdispatch.dylib                   0x9371b2cf _dispatch_call_block_and_release + 15
    12  libdispatch.dylib                   0x9371ea80 _dispatch_client_callout + 46
    13  libdispatch.dylib                   0x9371c8e8 _dispatch_main_queue_callback_4CF + 223
    14  CoreFoundation                      0x9211b255 __CFRunLoopRun + 1829
    15  CoreFoundation                      0x9211a7c4 CFRunLoopRunSpecific + 308
    16  CoreFoundation                      0x9211a67b CFRunLoopRunInMode + 123
    17  HIToolbox                           0x90b6fc76 RunCurrentEventLoopInMode + 242
    18  HIToolbox                           0x90b76eb9 ReceiveNextEventCommon + 374
    19  HIToolbox                           0x90b76d34 BlockUntilNextEventMatchingListInMode + 88
    20  AppKit                              0x97621923 _DPSNextEvent + 709
    21  AppKit                              0x97621167 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 119
    22  AppKit                              0x9761d78c -[NSApplication run] + 855
    23  iTunes                              0x0017a898 iTunes + 1546392
    24  iTunes                              0x0017a709 iTunes + 1545993
    25  ???                                 0x00000002 0x0 + 2

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • W2 and 1099 Patches for year 2009 on E-Business Suite 11.5.10.2

    Friends -
    Is there any w2 and 1099 patches released for year 2009 for E-business suite 11.5.10.2
    Recently we implement basic HR without any benefits. Please provide me list of patch details.
    Regards
    Satish

    Pl see if MOS Doc 255466.1 (End of Year Processing Using Oracle Payroll HRMS (2009)) can help
    HTH
    Srini

  • Lion OS random freezing. Any updates on a fix for this?

    I've downloaded the latest Lion OS updates but my iMac continues to randomly freeze up and requires a restart. Any updates on a fix for this?

    Create a new admin user account, log into it, and see if the freezes persist.

  • Leopard 10.5.4 update and security patches

    I am new to macs and I have a question regarding OS updates and security patches. I installed the 10.5.4 update. Do I need to install the 2008-004 security update?
    Thanks.

    Welcome to Apple Discussions and welcome to Mac
    The easiest way to find out exactly what your Mac needs is to go to your Apple menu and choose Software Update.
    EDIT: It should include it but I had to check because I used the Combo Update.
    -mj
    Message was edited by: macjack

  • My httpwatch professional is not compatible with firefox 4 ? any updates will be released for that ?

    my httpwatch professional is not compatible with firefox 4 ? any updates will be released for that ?

    Yes, HttpWatch does support Firefox 4 but you'll need to install version 7.1.34 or later:
    http://www.httpwatch.com/download/
    If you have any problems please contact [email protected] .

  • My iPhone 4s has the latest OS update and this morning for no reason all my contacts have disappeared.  Is there a fix or reason for this?

    My iPhone 4s has the latest OS update and this morning for no reason all my contacts have disappeared.  Is there a fix or reason for this?

    After some troubleshooting, I decided to order a new battery.  I replaced the battery and was then able to get it to restore, however--after I restore it and it comes time to restart the phone, it gets stuck and doesn't turn on.
    Sorry, your repair ruined the iPhone.
    She does not have apple care and even though she loved this device, she isn't going to buy another iPhone because of all the problems shes had with this one (it's just over a year old).
    After you ruined the iPhone with DIY, Apple won't touch it anymore. You should have asked before all these had happened.
    I'm an android user myself and I love rooting/flashing new ROMS, so if jailbreaking her phone or doing some kind of super-restore with 3rd party programs might help, I'm all for it-
    Yeah, all Android user can think of is Jailbreaking, read this: http://support.apple.com/kb/HT3743

  • HT201363 my ipad went on update and now asking for passcode which i don't know

    my ipad went on update and now asking for passcode whcih i don't know what should i do now to start operating

    Hey sunny1008,
    Thanks for the question. The following article provides some solutions if you are having issues with passcode lock:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212
    If you have never synced your device with iTunes, or you do not have access to a computer
    If you see one of following alerts, you need to erase the device:
    "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
    "You haven't chosen to have [device] trust this computer"
    If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    Alternatively, place the device in recovery mode and restore it to erase the device:
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the Connect to iTunes screen.
    5. iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
    Thanks,
    Matt M.

  • Difference between Maintenance update and recommended patches.

    Hello
    What is the difference between "Maintenance Update" and "Recommended patches" ?
    Can we install the OS from the distribution, then install the recommended patches and have a decent system. Or we do need to install the maintenance update before the recommended patches ?

    Hi,
    What do you mean of Manual Update.
    Simulation means , it will not upload into the data to the datatarget,It just explore you about how the system goes through update rules,Transfer rules .
    real upload/Update manually means the data will reach the datatarget and sits there with out explore you about how the system goes through update rules,Transfer rules .
    With rgds,
    Anil Kumar Sharma .P

  • Help-urgent - how to update service pack and apply patches for ADS

    Dear all,
       I've just download the sp 11 and the patch ,how should i update my ADS? I've try to search the forum but to no avail. Pls advise,thanks.
    Regards,
    Joan

    Hi Joan,
    To deploy an SCA or SDA, proceed as follows:
          1. Make sure you have downloaded the SCA or SDA from SAP Service Marketplace.
          2. Start the SDM GUI. To do this, execute the following file:
                a) Windows: RemoteGui.bat in folder \usr\sap\<SID>\<instance>\SDM\program
                b) Unix: RemoteGui.sh in folder /usr/sap/<SID>/<instance>/SDM/program
          3. The SDM GUI screen appears.
          Note: With SAP Web Application Server 6.30 the SDM server is started whenever you start the SAP system. To check whether the SDM server is running, use the tools SAP Management Console (Windows) or jcmon (UNIX).
          4. Choose "SDM Gui -> Login" or the icon "Connect to SDM Server". The dialog box "Enter Login Information for SDM Server" appears.
          5. Enter the following information:
                a) Password
                The initial password is "sdm" (without quotes).
                b) User description (optional)
                c) Hostname
                d) Port
                With instance number 00, the default port number is 50018. If your instance number is different from 00, the port number changes to
                Port = 50018 + 100 x <instance number>.
                You have to calculate the new port number and enter it manually.
          6. Choose "Login". The SDM GUI appears.
          7. Choose tab "Deployment".
          8. Choose "Add SCA/SDA to Deployment List (Local File Browser)". A file selection screen appears.
          9. Select the SCA or SDA file you would like to deploy and choose "Next" to read the information on the following screens.
          10. Choose "Next" until the "Start" button appears.
          11. Choose "Start". After the SCA or SDA has been completely deployed, a success message appears.
          12. Choose "Confirm" to return to the SDM GUI.
          13. When you have finished work, log out from the SDM server. Choose "Deployment -> Logout" or the icon "Disconnect from SDM server" for this.
    If this answers your question, please mark the question accordingly and do award points if helpful.
    Regards,
    Arafat

  • IPhoto 11 asks for a software update before starting but doesn`t find any updates and will not open the program?

    What can i do to solve my problem? I uninstalled the software and re installed but still inidcate to upgrade and don't find any update.

    Thank you very much for your help. The problem was solved follwing the next steps:
    1- Remove iphoto
    2- Install it again from the iLife11 disc.
    3- Download and install manually the update to iPhoto 9.1:
    http://support.apple.com/kb/DL1322
    4- Dowload and install manually the update to iPhoto 9.3:
    http://support.apple.com/kb/DL1545
    5- Depress the option and command keys and Launch iPhoto
    6- Rebuild library

  • I can not get any updates and therefor not use Java as it only run updates for Mac 10.7. and later? How do i get the updates to install and use Java?

    I can not get ny updates and therefore not use Java, as it only run updates for MAC 10.7. and later. How do i get the updates to install and use JAVA ?

    In Snow Leopard you update Java from Software Update (in the Apple menu). You can check your version by opening Terminal and typing
    java -version
    (don't get creative and type anything else)
    The latest version is 1.6.0_65.

Maybe you are looking for

  • 10.2.8 not upgrading...

    Hello, My name is Kellie. I am trying to upgrade my OS X 10.2.8 version to the new Tiger OS X 10.4.3. Everytime I try to install it, it checks the disk fine, and then once it tries to install it says, "there were errors and please try again" and then

  • Sap standard report for customer trial balance based on business area wise

    hi experts,                 Can any tell me is there any standard report for customer trial balance based on business area.

  • Sond control for external modem when faxing

    Does anyone know of a way to turn off the sound when using an Apple external modem for faxing? Oddly, my sound output is set for USB speakers which are off. I have the system volume turned all the way down. Yet when sending or receiving a fax, the in

  • Imported Star Ratings

    In Aperture, when I import images that have been previously meta-annoted in iView, the star ratings do not show up (that column is empty in list and thumb views), although all my other iptc stuff is there. The stars DO show up in LightRoom, but not i

  • How to purchase? Pay-per-use?

    We've developed an application with our free $15 a month developer account, and we're planning to use it in a big webcast event next week. There will be over 1000 contributer in the event so, we'd like to purchase more credits. But we couldn't find h