Any updates on email encryption support for non-BES users?

Hi,
Given BlackBerry tends towards business users, when can we expect the nearly mandatory feature of encrypted email?? I know it is available with BES, but for the rest of the world who do not have BES, when can expect encryption?
S/MIME is essential and PGP is nice to have in my case.
Every other phone on the market can do this, so come on BlackBerry don't force me to sell my lovely Passport. I love it but if you are never going to do encryption it will have to go. I'm a business user and you are forcing me to Android or iOS just for this simple feature.
Thanks

Your CIO is asking the wrong question. What about FireWire ports? What about AirDrop? However, if you need to go through the motions of placating him, search for "Removing USB Support Software" in this document:
http://images.apple.com/support/security/guides/docs/SnowLeopard_Security_Config _v10.6.pdf

Similar Messages

HT201363 I forgot the security question and did not reach me any e-mail from an email technical support for the alternative I hope to help

I forgot the security question and did not reach me any e-mail from an email technical support for the alternative I hope to help

Alternatives for Help Resetting Security Questions and/or Rescue Mail
     1. If you have a valid rescue email address, then use this procedure:
         Rescue email address and how to reset Apple ID security questions.
     2. Fill out and submit this form. Select the topic, Account Security. You must
         have a Rescue Email to use this option.
     3. This is the only option if you do not already have a valid Rescue Email.
         These are telephone numbers for contacting Apple Support in your country.
         Apple ID- Contacting Apple for help with Apple ID account security. Select
         the appropriate country and call. Ask to speak to the Account Security Team.
Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
                         Apple ID- All about Apple ID security questions.

Email profile support for Samsung Android (KNOX) devices in integrated environment of SCCM 2012 R2 and Microsoft Intune

Hi,
I could see that lot of TechNet articles are being updated recently with the information on Samsung Knox.
Tried to check the email profile configurations in the SCCM console, could not find Android platform in the supported platforms.
I could see this option available when I login to the admin portal of Intune. Can any one confirm if the extension for enabling email profile support for Samsung Kiosk devices id released or planned to be released.
Regards
Leela

Configuring email profiles on Andriod devices is not yet supported via ConfigMgr integrated with Intune, see also:
https://technet.microsoft.com/en-us/library/dn554226.aspx
It probably will be in the future, but there are no dates available yet.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

After ICS update, stock email not syncing for exchange 2010 activesync.

After ICS update, stock email not syncing for exchange 2010 activesync.
My corporate email which was flawlessly working before ICS update. Even though I tried re-creating a new account, it hangs "waiting for sync"
Has any patch been released or explicit instructions have been provided ?
First sync:
5/3/2012 7:47 PM
Last successful sync:
Not Available
Folders synced:
0
Device name:
Not Available
Device model:
MT11i
Phone number:
Not Available
Mobile network:
Not Available
Device type:
Android
Device ID:
xxxxxxxxxxxxxxxxxxx
Device IMEI:
Not Available
Device OS:
Android 4.0.3
Device language:
Not Available
User agent:
Android/4.0.3-EAS-1.3
Access state:
Access Granted
Access set by:
Global Permissions
Policy applied:
Active Sync Policy - Partially applied
Policy updated:
5/5/2012 8:11 AM
ActiveSync version:
14.1
Also at http://talk.sonymobile.com/message/184221
Whyr is this defect "assumed answered" ? I went though all the posts and didnt find any solution?

Hopefully my reply to this can help.
http://talk.sonymobile.com/message/190149#190149
And please try to keep same problem in same thread.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Pagination support for non-Oracle databases?

Hi,
I just read this thread (Pagination Support on pagination support. Is there any way to get pagination with non-Oracle databases? We are using an IBM iSeries / AS/400 DB2 database right now, and we're planning to use some local lightweight database in the near future as well (probably Cloudscape/Derby or "IBM Everyplace database".)
We currently use code like this:
String sql = "SELECT art FROM Artikel art" +
            /* dynamically generated where statement is added here */
            + "ORDER BY art.artikelNummer";
Query q = em.createQuery(sql);
q.setFirstResult(firstResult);
q.setMaxResults(maxResults);If I look in the TopLink logs, I see queries like this:
SELECT ARTNR, ARALT, ARAFJ, ARXII, ARAVJ, ARXIV, ARANJ, AHGCD, ARNVJ, ARCRJ, ARARK, ARFKJ, ARTNK, ARGP1, ASGCD, ARGP2, ARPR1, ARGP3, ARPR2, AREX1, ARPR3, AREX2, ARPR4, AREX3, ARASA, ARINA, ASSCD, ARIA1, ARBAN, ARIN1, ARBAV, ARIA2, ARBAK, ARIN2, ARCES, ARIA3, ARCDT, ARIN3, ARCRE, ARIA4, ARCWK, ARIN4, ARHBH, ARIA5, ARDFA, ARIN5, ARDFG, ARIA6, ARDOS, ARIN6, AREPW, ARINN, ARFOD, ARIAS, ARFOE, ARINS, ARFOF, ARNAB, ARFOI, ARNIB, ARFON, ARNIA, ARFOS, ARNN1, ARFTA, ARNA2, ARVIV, ARNO2, ARGAP, ARNN3, ARGPT, ARNA4, ARGPD, ARNO4, ARGPA, ARNN5, ARGPO, ARNA6, ARHIS, ARNN6, ARISP, ARNIO, ARKHM, ARNNS, MAGCD, AROVJ, MTGCD, ARPL1, ARMXM, ARPL2, MRKCD, ARPL3, ARMVR, ARVKJ, ARMIM, ARV12, ARMDT, ARVVJ, ARMTE, AR#VR, ARMTU, ARZLS, ARMTM, ARIAT, ARMWK, ARAVS, MPCCD, ARNVS, ARBTW, ARFJS, ARXI2, ARG2S, ARXI3, ARE1S, ARXI4, ARE3S, ARXI6, ARIB1, ARXI1, ARIB2, ARXI5, ARIB3, AROPI, ARIB4, ARPRV, ARIB5, SZGCD, ARIB6, ARSPC, ARINO, ARSMF, ARIOS, VEAAN, ARNIS, ARSYN, ARNO1, ARVR1, ARNA3, ARV1S, ARNN4, ARVR2, ARNO5, ARV2S, ARNIN, ARVR3, ARNOS, ARV3S, ARP1S, ARTFA, ARP3S, ARTFG, ARS12, ARUVC, ARZLD, ARUCW, ARAJS, ARBKV, ARCJS, ARVVI, ARG3S, ARVVP, ARINB, VPOCD, ARIO2, VPECD, ARIO4, ARVIH, ARIO6, ARVHG, ARNBS, ARVRW, ARNN2, ARVPR, ARNA5, ARVVR, ARNAS, ARVVS, ARP2S, ARVV1, ARSVV, ARZK1, ARNJS, ARNA1, ARNO3, ARIO1, ARNO6, ARIO5, AROJS, ARE2S, ARVJS, ARIBS, ARIAD, ARIO3, ARG1S FROM ART WHERE ((((ARUVC = 'N') AND (ARHIS = 'N')) AND (ASGCD = 7)) AND (AHGCD = 15)) ORDER BY ARTNR ASC
(Yeah, I know we have too much columns in the table...)
So, no pagination in the query. As you can see, we have a mechanism in place to dynamically generate a where clause. This is because the user can set filters. The problem is, if our user sets a filter that causes the result set to be significantly smaller, the performance is way better than when he sets no filter at all. We suppose this is because the whole result set is sent to TopLink, regardless of the values of firstResult and maxResults.
We are using TopLink Essentials 2.1-10, by the way.
Message was edited by:
Bart Kummel

Hi all,
I'm trying to subclass <tt>DatabasePlatform</tt> to add pagination support for the AS/400 DB2 database of my customer. To be fair, it is not going very well so far.
The first problem is, the query Chris found by googling (Re: Pagination support for non-Oracle databases?), does not work for AS/400s version of DB2. In fact, although it is called "DB2", the database on the AS/400 system is a whole other database than the "normal" DB2 database that runs on Windows and *nix. The AS/400 DB2 simply does not have a "ROW_NEXT" function.
Another option would be to use the <b>row_number() over()</b> mehtod. But, as can be read here, this function is only available from version V5R4 of OS/400. And guess what? We're stuck on V5R3 at this client. (We cannot upgrade, because there's an application in use that's written in Delphi and IBM dropped the Delphi binding from V5R4...)
So I pretty much ran out of options. On the mailing list I linked to above, someone mentions the option to make a sort of stored procedure that generates a row count number. An example of how to do this can be found here. I implemented it, and ended up with this code:
package com.myclientsname.persistence;
import java.sql.Connection;
import java.sql.PreparedStatement;
import java.sql.ResultSet;
import java.sql.SQLException;
import org.eclipse.persistence.expressions.ExpressionBuilder;
import org.eclipse.persistence.internal.databaseaccess.DatabaseCall;
import org.eclipse.persistence.internal.expressions.ExpressionSQLPrinter;
import org.eclipse.persistence.internal.expressions.SQLSelectStatement;
import org.eclipse.persistence.internal.sessions.AbstractSession;
import org.eclipse.persistence.logging.SessionLog;
import org.eclipse.persistence.platform.database.DatabasePlatform;
import org.eclipse.persistence.sessions.SessionProfiler;
public class AS400Platform extends DatabasePlatform {
    private static final long serialVersionUID = 0L;
    public AS400Platform(){
         super();
         super.setShouldBindAllParameters(false);
    public void printSQLSelectStatement(DatabaseCall call, ExpressionSQLPrinter printer, SQLSelectStatement statement) {
        int max = 0;
        int firstRow = 0;
        if (statement.getQuery()!=null){
            max = statement.getQuery().getMaxRows();
            firstRow = statement.getQuery().getFirstResult();
        if ( !(max>0) && !(firstRow>0) ){
            super.printSQLSelectStatement(call, printer,statement);
            return;
        } else {
            statement.setUseUniqueFieldAliases(true);
            ExpressionBuilder builder = new ExpressionBuilder();
            statement.addField(builder.getField("COUNTER() AS CNTR"));
            printer.printString("SELECT * FROM (");
            call.setFields(statement.printSQL(printer));
            printer.printString(") AS R WHERE R.CNTR >= ");
            printer.printParameter(DatabaseCall.FIRSTRESULT_FIELD);
            if ( max > 0 ){
                // Use of binding parameters is not allowed here, so use
                // String concatenation instead...
                printer.printString(" FETCH FIRST " + max + " ROWS ONLY");
        call.setIgnoreFirstRowMaxResultsSettings(true);
    public boolean wasFailureCommunicationBased(SQLException exception, Connection connection, AbstractSession sessionForProfile){
        if (connection == null || this.pingSQL == null){
            //Without a connection we are unable to determine what caused the error so return false.
            //The only case where connection will be null should be External Connection Pooling so
            //returning false is ok as there is no connection management requirement
                //If there is no ping sql then we can not perform the ping.
            return false;
        PreparedStatement statement = null;
        try{
            sessionForProfile.startOperationProfile(SessionProfiler.ConnectionPing);
            if (sessionForProfile.shouldLog(SessionLog.FINE, SessionLog.SQL)) {// Avoid printing if no logging required.
                 sessionForProfile.log(SessionLog.FINE, SessionLog.SQL, getPingSQL(), (Object[])null, null, false);
            statement = connection.prepareStatement(getPingSQL());
            ResultSet result = statement.executeQuery();
            result.close();
            statement.close();
        }catch (SQLException ex){
            try{
                // Had to add this check because of NullPointerExceptions
                // (maybe a bug?)
                if(statement != null){
                    //try to close statement again in case the query or result.close() caused an exception.
                    statement.close();
            } catch (SQLException exception2) {
                //ignore;
            return true;
        }finally{
            sessionForProfile.endOperationProfile(SessionProfiler.ConnectionPing);
        return false;
}(As you can see, I had to override the <tt>wasFailureCommunicationBased()</tt> method as well, due to some unexpected NPE's. (A bug, perhaps?))
This code does work. However, the performance is not very well. The first page comes relatively fast, but as you browse further in the table, each page comes slower. I assume this is because the counter() method has to be evaluated for each row in the table.
I have to get the performance better and constant. Does anyone have an idea how to optimize this further?
Best regards,
Bart Kummel

I received a notice that there is an update for my Lightroom 5. I have the non-creative cloud version. Is the update available for non-cloud users? It says to download click the link and it takes me to Cloud free trial screen.

I received a notice that there is an update for my Lightroom 5. I have the non-creative cloud version. Is the update available for non-cloud users? It says to download click the link and it takes me to Cloud free trial screen.

It is the same installer. You can run it as 30-days trial (CC version) and decide later for CC or stand-alone. To license as stand-alone, follow this guide.
If you already have the LR6 license key, you can enter it during setup and do not need to follow the guide.

Where is Adobe support for non-working software??

Where is Adobe support for non-working software??
Thanks,
Jerry

Bill,
Thank you for your reply!
You may have guessed I am a bit exassperated. (See this discussion from yesterday.) (Re: How do I get past the Error: 16 problem?
I am trying to move Adobe Acrobat IX, Photoshop CS6, Photoshop CC and Bridge to a new computer (Mac Pro (late2013), Mavericks 10.9.3) from an older Mac Pro using the same OSX.
I keep getting the error 16 message whether I try to open Acrobat or Photoshop (I have a paid for DVD of CS6). I have uninstalled and re-installed. I have reset permissions on 2 folders ion the system Library. I have either deactivated or signed out of ALL the Adobe products on my old computer. I signed in as 'Root' and tried to open the software. I have re-downloaded all the products except CS6 which I own. I have restarted the computer. I have repair the drive using Disk Utility and Disc Warrior. In short I have tried everything I can think of and that which has been suggested my others on this Forum.
Thanks again,
Jerry

HT5525 my iphoto is version 9.2 and doesn't show any updates avail when i check for updates. how do i update to latest iphoto then?

my iphoto is version 9.2 and doesn't show any updates avail when i check for updates. how do i update to latest iphoto then?

Launch the App Store application and log in with your Apple ID. Check to see if iPhoto is available in the Updates section.
OT

Beryl: support for non power of two textures missing

Is anyone else seeing Beryl crash X with a message about missing support for non-power-of-two textures, and something about no manageable screens being found?
Also, I've gotten something about GL_EXT_texture_from_pixmap not being available at least once, when it is definitely available:
[proteus@chameleon ~]$ glxinfo | grep -i texture_from_pixmap
libGL warning: 3D driver claims to not support visual 0x46
GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
[proteus@chameleon ~]$
I do wonder if the "3D driver claims to not support visual 0x46" thing has anything to do with this...

Unichrome here. Neither are powerful hardware but both should should have full support for AIGLX, barring some kind of weird driver bug (which wouldn't be very surprising in view of the EXA bug).
Is anyone getting this with Intel or ATI hardware?

User Interface Access Customisation for non admin users

Hi,
It is understood that for non-admin users, some features of the Planning Interface is not enabled and this can be controlled by proper access permissions. But, is it possible to extend the customization to provide some additional features in the menu bar for an user?
For example, if View User wants to manage task lists. Is it possible by some sort of customization? Please advise.
Thanks.

Hi,
You can create right click menus, and you can also create links on the tools page. Would any of these help you?
Here is the doc on those subjects:
Creating and Updating MenusAdministrators can create right-click menus and associate them with data forms, enabling users to click rows or columns in data forms and select menu items to:
Launch another application, URL, or business rule, with or without runtime prompts
Move to another data form
Move to Manage Approvals with a predefined scenario and version
The context of the right-click is relayed to the next action: the POV and the Page, the member the user clicked on, the members to the left (for rows), or above (for columns).
When designing data forms, use Other Options to select menus available for Data Form menu item types. As you update applications, update the appropriate menus. For example, if you delete a business rule referenced by a menu, remove it from the menu.
To create, edit, or delete menus:
Select Administration, then Manage, then Menus.
Perform one action:
To create a menu, click Create, enter the menu's name, and click OK.
To change a menu, select it and click Edit.
To delete menus, select them, click Delete, and click OK.>
Specifying Custom ToolsAdministrators can specify custom tools, or links, for users on the Tools page. Users having access to links can click links from the Tools menu to open pages in secondary browser windows.
To specify custom tools:
Select Administration, then Application, then Settings.
For Show, select Advanced Settings.
Click Go.
Select Custom Tools.
For each link:
For Name, enter the displayed link name.
For URL, enter a fully qualified URL, including the http:// prefix
For User Type, select which users can access the link.
Click Save.

Itunes hangs for non admin users

I've got itunes 10.6.3 running on 10.6.8 Macs which are joined to AD and OD for network authentication.
When starting itunes as anything other than an administrator (local or domain) itunes simply hangs - on the very first run you can Agree to the EULA but after that it hangs at the startup. Sometimes you get the authentication dialogue for our proxy server but not always.
I've checked and the proxy isn't even receiving any requests, and it works fine for an admin user. I've taken the proxy out of the users preferences and it still hangs.
So is itunes dead in the water for non admins, or do I have to resort to the Windows 95 days of making everyone an admin of the Mac?

Fgi42 wrote:
The backup destination is an OpenSolaris ZFS directory shared with netatalk.
That doesn't sound like a supported destination for Time Machine backups. See Apple's Disks that can be used with Time Machine.
You'll probably need to find someone familiar with the OpenSolaris OS.

Acrobat 7 requires admin password at every launch for non admin users?

acrobat 7 requires admin password at every launch for non admin users?
any one with a solution or similar problem?
thanks for any help.

I've been avidly following all of the threads regarding this issue...yet none of the solutions have worked for me. I've got 11 Mac users that do not use the Creative Suite..only Acrobat, Quark, etc. I've tried installing and re-installing through both Admin and User accounts, I've tried the AdobeBib XML change, I've tried enabling Root and installing, changing permission on the Acrobat folder, etc. all to no avail. I still get asked for Admin Authentication every time Acrobat and Distiller are opened (except on the Admin account side). This is happening on one particular Mac (G4, 1GB Ram, OS 10.4.3) for both Acrobat Standard 6 and 7 as well. The biggest issue that also happens in tandem with the Acrobat installs is the inability to print from Quark. I get the following error when printing: "The process "pictwpstops" terminated unexpectedly on signal 6." Because of the necessity to print Quark documents, I have uninstalled all Acrobat on the machines until we can get a fix. This resolves the printing problem with Quark. The only option left is to set up all users as Admin accounts - which I really do not want to do. Any other suggestions out there? I've got more information available if needed.

Can I burn photos onto a DVD/CD for non-Mac users?

Can I burn photos onto a DVD/CD for non-Mac users?

You can burn a plain CD/DVD by just dragging the photos there; but, that may or may not be playable by everyone. To be sure that the result would be playable in any computer or CD/DVD player, it would be better to use either one of the apps already on your system - such as iPhoto. I don't use that myself - I use other third party software - but take a look at iPhoto help. And, you could make it more interesting by creating a slideshow - also in iPhoto, or iMovie. To give it the final cool touch, bring it into iDVD to give it a polished look if you'd like. You can burn it then from any of the above.
If you happen to have Toast (an excellent burning app), you could use that as well (that is my preferred way to work). In Toast, you have multiple choices: burn a data CD/DVD for Mac only, for Mac & PC, etc, burn a picture CD, video DVD, etc, etc.

How to allow access to winrs for non-admin user?

I have Windows Server 2012 (and Server 2008, but it is next priority) to monitor it using txwinrm. txwinrm library internally is using WinRS protocol. I have to monitor it using least privileged user, but don't know how to configure access for him.
All I managed to do - is to configure remote Powershell session for my user, but it's look like that winrs and powershell sessions have different security descriptors:
Invoke-Command -ComputerName 192.168.173.206 -Credential (credential Administrator $pwd) -ScriptBlock { 2 + 2}
# gives 4
Invoke-Command -ComputerName 192.168.173.206 -Credential (credential lpu1 $pwd) -ScriptBlock { 2 + 2}
# gives 4
winrs -r:192.168.173.206 -u:Administrator -p:$pwd 'powershell -command "2+2"'
# gives 4
winrs -r:192.168.173.206 -u:lpu1 -p:$pwd 'powershell -command "2+2"'
# Gives Winrs error: Access is denied.
Configuration for my user is following:
(Get-Item WSMan:\localhost\Service\RootSDDL).value
# O:NSG:BAD:P(A;;GA;;;BA)(A;;GA;;;S-1-5-21-3231263931-1371906242-1889625497-1141)S:P(AU;FA;GA;;;WD)(AU;SA;GWGX;;;WD)
(Get-PSSessionConfiguration -name Microsoft.Powershell).SecurityDescriptorSddl
# O:NSG:BAD:P(A;;GA;;;BA)(A;;GA;;;S-1-5-21-3231263931-1371906242-1889625497-1149)S:P(AU;FA;GA;;;WD)(AU;SA;GXGW;;;WD)
(In each security descriptor my user is given general access to protected object).
So what security descriptor should I set to make my winrs query work for non-admin user?

Hi Bunyk,
I can not recreate the erroe you posted, and please also post the screenshoot in your convenience.
I tested with a non-domain user but has the local admin permission of the remote computer, and this worked, before running the remote cmdlet in powershell, I also configured the TrustedHosts.
In addition, the access denied could be also caused to the Protocol Filtering on the remote server, for more detailed information, please refer to this thread:
winrs error:access is denied
I hope this helps.

SQL tab not working in V2.1 EA1 for non-DBA users -- how to fix?

In v2.1 EA 1 the tab to show the SQL script (DDL) in the object browser is not working for non-DBA users. In the prior version, these users would see a message about DBMS_METADATA and then the message would indicate that an "internal generator" would be used to generate the DDL script. After that brief message the DDL would show up as expected. This doesn't seem to be the case in the newest version.
I issued the following two grants to a particular user which worked, but I am reluctant to issue the grants to "PUBLIC".
SQL> grant execute on DBMS_METADATA to XXXXX;
SQL> grant select_catalog_role to XXXXX;
So, my questions are:
1) Will the old functionality (that didn't require these privileges) be added to V2 at some point?
2) What security implications are there for issueing the above grants to PUBLIC?
NOTE: After granting execute on the DBMS_METADATA package, it still didn't work. I left that grant in place and granted SELECT_CATAOG_ROLE, so I can't say for sure that the 1st grant was required.
Edited by: user615070 on Nov 19, 2009 9:30 AM
Edited by: user615070 on Nov 19, 2009 10:06 AM

An OEM account is separate from the database account. You need to use OEM UI to create an OEM account, however, for certain tasks to be done in the databases which OEM is monitoring they will also require separate database accounts within those databases. For example, to view the performance tab in OEM UI, a database account is required.
OEM only has two types of users, i.e. Super Administrator and Administrator, but don't go by the names. You can grant an OEM 'Administrator' account access to specific targets and what they can do within OEM, such as only viewing reports, targets, and so on. For access within a database, the user created need not be a DBA either.
I hope you understand.

Any updates on email encryption support for non-BES users?

Similar Messages

Maybe you are looking for