Any User Exist or Enhacement which will show Mesuring Point Classification.

HI Experts,
Working on one requirement where , I need to show Measuring Point class details in IL03 , Screen.
Any user exit or enhancement ?
Thanks in advance,
Riyaj

Hi,
ITOB0001 PM: Customer include subscreen for techn. obj. master data
http://pjatkin.users.btopenworld.com/documents/PMCSUserExits2.pdf
In this pdf file, check the documentation under ITOB0001.
Regards,
Maheswaran.

Similar Messages

Any user exists for SAPLSBAL_DISPLAY?

hi,
in Transaction vl02n, i throw some error message to the error log screen. And from that screen, i would like to terminate the whole transaction (vl02n) when user press back,cancel or exist button on the toolbar.
Please advise is there any user exists can do this.
thank you.

Hi Reetha,
You can terminate whole transaction by using error type A (abort). This message is displayed in screen, when the user confirm it, the transaction will be terminated.
Regards,
Dhanunjaya Reddy

Is there a good video available for beginners which will show what Photoshop can do?

I'm trying to find a good video which will give a general introduction to what Photoshop can do - not how to do it - for a group of beginners at our local photographic society.
Ideally I'm looking for something which lasts 15 - 20 minutes and will demonstrate how Photoshop can be used for correcting and manipulating images, plus a short section on how it can be used more creatively.
Is anyone aware of such a video which is preferably free to use (with obvious credits), and where it's available from?

There are multiuser/multiplatform apps that you can use to manage your photos that can view multiple source photos. I use Media Pro 1. However, you can't use iPhoto and MP on the same set of original/source image files.
I use MP as my primary DAM (digital asset management) application and iPhoto just for special projects like books, calendars, cards, etc.
OT

How do i create a button which will show new content on same page?

Hello,
I hope someone can help.
I have an image; it's a circle with different parts and different colors for each part. I inserted an image in this post.
I want to be able to make a button out of each part (will do this with Photoshop), BUT i want to have a text shown on the right from the wheel if you click on a particle of the circle. So i don't want it to go to a new page, but i want to have a textframe to pop-up when you click. And when you click on a different part of the circle a new text will occur (and the old one won't show).
Hope i made my question clear, english is not my motherlanguage so i'm sorry if my sentences are a bit weird.
Thanks a lot, i hope it can be done with Muse! (This is a big part of the website.)
best regards, bart

Hello,
You can achieve this using a blank compostion widget ot a tooltip widget.
You would need to use "no fill" for the trigger containers so that they are transparent and then place them onto each portion of the image.
Now when user clicks on that portion of the image, the trigger above it gets clicked and in a target container you can have the text displayed.
The only issue here would be that the trigger containers would be of square/rectangular shape so you might not be able place them peroperly to cover all the sections of the image.
Please refer to the video which might be helpful : http://tv.adobe.com/watch/muse-feature-tour/muse-trigger-target/
Regards,
Sachin

How to create a report which will show us the hierarchical stucture

Hi all,
I am using financial reporting studio for reports.
I have a planning appliaction. And i used Zones as the Entity Dimension.
Now I am trying to create a report for users to see my entity dimension hierarchy.
Something like Zones
East
West
North
South
I am able to generate the report but the hierarchy of the Zones does not show up..
Can anybody advice if there is a option in Financial Reporting to make the hierarchy structure more visible by adding proper indentation between the parent and the child?..
And yes i have used a prompt for the Entity in the report....
Thanks

Hi Venuramani,
Thanks for ur reply........
Let me explain you properly what I want......
I am getting the hierachical structure , but I am getting the child first,then parent and then
grant parent level members.But I want it in a different way first grant parent, then parent and then
child .Is there any way to do this?Pls advise me.........
Thanks

Can Web Performance Test work on AJAX or Javascript Project which will show only one URL for all the pages?

Hi there,
I'm working on testing a AJAX and JavaScript Project which has several pages but all in the same URL. I need to test some attribute on the page or parameter past by AJAX or Javascript. Can Web Performance Test work to get what I want?
Thanks,

Hello,
Thank you for your post.
Web performance test is used to test if a server responses correctly and the response is consistent with what we expected. And we test the response speed, the stability and scalability.
The Web Performance Test Recorder records both AJAX requests and requests that were submitted from JavaScript, but
web test does not execute JavaScript. I am afraid that you can’t use web test to test parameter past by AJAX or JavaScript.
Please see:
Web Performance Test Engine Overview
About JavaScript and ActiveX Controls in Web Performance Tests
From the first link, “Client-side scripting that sets parameter values or results in additional HTTP requests, such as AJAX, does affect the load on the server and might require you to manually modify the Web Performance Test to simulate the scripting.”
If you want to execute the function typically performed by script in web test, you need to accomplish it in coded web performance test or a web performance test plugin. Please see:
How to: Create a Coded Web Performance Test
How to: Create a Web Performance Test Plug-In
I am not sure what the ‘some attribute on the page’ is. If you mean that you want to test those controls on the page, you can do coded UI test, which can test that the user interface for an application functions correctly. The coded UI test performs actions
on the user interface controls for an application and verifies that the correct controls are displayed with the correct values. You can refer to this article for detailed information about code UI test:
Verifying Code by Using Coded User Interface Tests
Best regards,
Amanda Zhu [MSFT]
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

TS1389 I'm unable to authorize my computer and don't see any of the prompts they say will show up in my Store Menu

I'm unable to authorize my computer and don't see any of the prompts (i.e.Authorize this computer, etc.) that they say should appear under Store Menu. Also songs aren't transerring to my ipod, which is why I deauthorized the computer, hoping to restore it, in the first place.

If using iTunes 11... See this Discussion...
https://discussions.apple.com/thread/4631735?tstart=0
See Here for full details...
About authorization and deauthorization

HT4946 I need to print & back-up a series of abusive/threatening SMS (on iphone 5c) for my solicitor. Is there a way to do this which will show the time, date & sender info? How can I preserve (full) SMS data as evidence for future court proceedings?

Does anyone know how to access sms text messages from iphone 5c backup from icloud or itunes? Apparently SMS can be restored so data I need must be stored in backup. I need to print a series of abusive/threatening SMS messages received on my iphone 5c from one sender. I need the time, date & whatever data is stored about source/sender of messages, as well as content. How can I access this data to create a chronological record of the abusive SMS messages and can I preserve the iphone's message log specifically-- so I can access records of these texts without having to restore a back-up? I need to do this to provide evidence for my solicitor and preserve that evidence for future court proceedings, thank you.

http://www.wideanglesoftware.com/touchcopy/index.php?gclid=CMr1..
http://www.ecamm.com/mac/phoneview/

Is there is any add-on which will make "Show all bookmarks (Ctrl +shift + B)" to be opened in new tab

When we want to open all my bookmarks, and when we click on bookmark icon \ show all book marks (Ctrl + Shift + B), it opens in new window instead it should opened in new tab like add-on manager or download page (with help of Download Manager Tweak Add-on) so basically is there any add-on at present which will induce this functionality in browser or is firefox will take up this as built in property in next version?

https://addons.mozilla.org/en-US/firefox/addon/tab-utilities/?src=search

In MIGO transaction Transfer posting user exist or BADI or Enhacements

Hi Experts,
Could you please help on this issue.
My requirment is, In MIGO transaction code, Transfer Posting (i.e., Storage location) screen, in item level there is Transfer posting tab From and Dest two sub screens are there.
if user enter material , plant and stoargae location in From side and that will be same maintain in Destination side.
If any user will change in Destination level Material or Plant or Stoarage location, I need to populate the error message.
Could you please tell me BADI or user exist or Enhacement for this requirment.
I have serached in SDN and debug the transaction code MIGO. I didn't found user exist and enhacment.
Thanks
Srinu

HI ,
If i tried this Enhacment MB_MIGO_SC. I have put break point and it is not triggering, when i am saving/ Checking the postings in MIGO transaction code.
Thanks
Srinu

Regd: User Exists

Hi All,
Is there any User Exists for modifying
1. Customer Master (SD Modlue based)
2. Payment Terms (SD Modlue based)
3. Delivery Location (SD Modlue based)
4. Pricing List (SD Modlue based)
5. Sales Tax (SD Modlue based)
And the process to work with those userexits. Pls.
Help and suggestion will be much appreciated.
Thanks.
Ganesh.

Hi,
Can u tell me the specific Userexits in the Include Prog MV45AFZZ which i should modify to get the results for
1. Customer Master (SD Modlue based)
2. Payment Terms (SD Modlue based)
3. Delivery Location (SD Modlue based)
4. Pricing List (SD Modlue based)
5. Sales Tax (SD Modlue based)
Pls so suggest me.
Thanks.
Ganesh.

User Exists In Sales Order Creation Program for adding "Reason For Reject"

Hi gurus
I have following requriement
As New Sales Order created (VA01) by default or at the time of saving the sale order, perticular "Reason for Rejection" should be set to each line item.
This is then can be removed in change (VA02) with Mass change.
We need this to review the sales order / block sales order from MRP run.
Please let me know how to manage this or is there any user exist for the same.
Thanks
Sunil K

Hi,
As per my knowledge the automatic creation of rejection order is not possible, still will check out and know.
but for urgent use you will have to follow the manual way of changing the line items from OK to blocked for apporoval so you can achieve their not passing on to MRP.
manual way is what is described below:
You can either reject the whole sales document or individual items.
Reject all items:
If you want to reject all the items, choose Reject document in the change modus for the sales document.
The system automatically selects all the items and you can enter a reason for rejection in the following dialog box.
Enter the appropriate reason for rejection and choose Copy.
The system assigns the same reason for rejection to all the selected items.
Reject individual items:
If you only want to reject some of the items, select those items in the item overview screen and choose Edit - Fast change of... - Reason for rejection.
A dialog box appears in which you can enter the appropriate reason for rejection.
Enter the appropriate reason for rejection and choose Copy.
The system assigns the same reason for rejection to all the selected items.
Reject individual items with different reasons of rejection:
If you want to enter different reasons for rejection for the items, choose the Reason for rejection tab page from the overview screen when changing the sales document.
You can enter a different reason for rejection for each item in the Reason for rejection field.
regards,
Siddharth.
Edited by: SD on Mar 15, 2008 10:22 AM

Default Employee group using user exist ZXPADU01

Hello,
I would like to know if it is possible to change the field
PSPAR-PERSG in infotype "action" -0000
via user exit ZXPADU01/2 ?
When I get p0000-MASSN = 10 ,i need to move 0 to
PSPAR-PERSG but via the user exits it is not possible.
I have coded the below logic in ZXPADU01, but it is not displaying the required employee group in actions screen.
data pspar type pspar.
case innnn-infty.
      when '0000'.
        move innnn to i0000.
         if ipsyst-massn = 'U0'.
                    l_persg = '4'.
          else.
                    l_persg = '1'.
          endif.
         pspar-persg = l_persg.
       move i0000 to innnn.
endcase.
          Please kindly help me in this regard.
Thanks,
V.Nagaraju.

>
vundralla nagaraju wrote:
> Hi,
>
>     I have tried with following different scenarios, but was not able to get the required output.
>
> 1.     Adding additional fields to structure I0000.
> 2.     Using PSPAR structure
> 3.     Using set parameter id u2018PRGu2019.
>
>    The main problem here is we are unable to pass the calculated Employee group back to the standard program which will show the required default PERSG. The Function Module for this user exit does not have the required Export Parameters, so we are not able to pass the required PERSG back to standard program.
>
>     Can any one suggest me how can I proceed further? Does any one faced similar problem. Please let me know.
      Please try this option also, this worked for me.
data:fieldname(25) type c value '(SAPFP50M)PSPAR-PERSG'.
       field-symbols: <fs> type any.
       ASSIGN (fieldname) TO <fs>.
        MOVE '9' to <fs>.

HOW TO WRITE USER EXIST IN B/W

HI SAP GURUS,
CAN U PLZ TEL ME THE STEP BY STEP " HOW CAN I WRITE USER EXIST"
AND I WHICH SUATION I CAN USE THIS OPTION
AND SAME WITH CUSTOMER EXIST ALSO
WITH AN EXAMPLE OF ANY ENHANCEMENT
PLZ KINDLY HELP ME

Hi,
here customer exit we can write in r/ and bw side
in both places also tcode is CMOD
first create the project
assign the enhancement for that procjet and go the compnents
it shows the screns as below.
if it is r/3
exit_saplrsap_001--for transaction data
exit_saplrsap_002---for master data attribute
exit_saplrsap_003---master text
exit_saplrsap_004 -heiraraches
situation in r/3
if do u want to enhance(add the field) to already existed data source or appling some condition on that.
if it is bw
same as r/3 for creating the project and assign the enhancement then click on copmonets it shows the fm as exit_saplrrso_001
in bw for all the things it is the FM
doble click on that it takes to the main code screen with zxrsuo1 structure and go for change mode and write the code.
in bw situation
when ever u want calculate something internaly in dyanaamically u can write the code
for example if u r created varible on some date colum now u want dynamically current date
then u can write code as below
when 'ur varibale name'
clear l_s_range.
l_s_range-low = sy-datum(current date)
l_s_range-option = 'eq'.
l_s_range-sign = 'i'.
append l_s_range to e_t_range.
here we r getting the current date for that varible
like that in different scenarios we can use this.
Thanks & Regards,
Sathish

User Exist for MM - Purchase Order

Hi ABAP expert,
is there any user exist for Purchase order, actually i'm want to prevent the user from do the deletion on PO items, as per my understanding we can use user exit.
can anyone help and how to do the process ?

Hi,
1. Just copy and paste this code and execute it.
2. Give the Tcode "ME21" and you will see the lot of user exits.
TABLES : tstc,     "SAP Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
* Validate Transaction Code
SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
* Find Repository Objects for transaction code
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
       WHERE pgmid    = 'R3TR'
         AND object   = 'PROG'
         AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
         WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
          WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
          WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
          WHERE pgmid    = 'R3TR'
            AND object   = 'FUGR'
            AND obj_name = enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
* Find SAP Modifactions
    SELECT * FROM tadir
      INTO TABLE jtab
      WHERE pgmid    = 'R3TR'
        AND object   = 'SMOD'
        AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
      WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(95) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      WRITE:/(95) sy-uline.
      LOOP AT jtab.
        SELECT SINGLE * FROM modsapt
        WHERE sprsl = sy-langu AND
        name = jtab-obj_name.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        WRITE:/1 sy-vline,
        2 jtab-obj_name HOTSPOT ON,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      ENDLOOP.
      WRITE:/(95) sy-uline.
      DESCRIBE TABLE jtab.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'No User Exit exists'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
* Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
Thanks,
Reward If Helpful.

Any User Exist or Enhacement which will show Mesuring Point Classification.

Similar Messages

Maybe you are looking for