Any user exit where XNAST comes with data
Hi all,
Is there any user exit at delivery time where I can find the xnast with data.
Thanks.
Good morning all,
Is not there any exit?
Thanks.
Deniz.
Similar Messages
-
User exit to change material availability date
Hi Gurus,
my requirement is like I need to change the material availability date based on some conditions.
Is there any User Exit to change the availability date so that I can dump my code in the user exit .
If not is there any alternative process to get the solution.
Thanks,
Sudhaa.............Hi Sudha,
Can you tell me your requirement clearly please.
Regards,
Dhanunjaya Reddy -
Is there any user exit/ badi to populate the partner bank type for F-63.
Is there any user exit/ badi to populate the partner bank type (field name BSEG-BVTYP) in transaction F-63. There is exit ZFI_FOAP_CDITEMS_00001011 having BKPF and BSEG as only import parameters so I cant change the value for BSEG-BVTYP.
So could you please let me know any exit where I can change the value for BSEG-BVTYP for transaction F-63?
Thanks in Advance,
Steevanhi,
Below r the user exit related to transaction F-63.
Check out if any of them will solve ur Query..
F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002 FIDCC1: Change IDoc/do not send
F050S003 FIDCC2: Change IDoc/do not send
F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
F180A001 Balance Sheet Adjustment
FARC0002 Additional Checks for Archiving MM Vendor Master Data
FEDI0001 Function Exits for EDI in FI
RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
RFEPOS00 Line item display: Checking of selection conditions
RFKORIEX Automatic correspondence
SAPLF051 Workflow for FI (pre-capture, release for payment)
Reward points if helpful,
Regards,
Brijesh -
Restricting vendors -any user exits please?
Hi,
I have a requriement where while creating Vendors they have configured in such a way that it has to be approved for all the create and change vendors. since there is some sensitive information like bank accounts and names .
now we have changed the requriement where in we need to restrict the information only for certain conditions
vendor employee account group B007 and company code 2001 and for rest they donot need any approval and can be directly created or changed.
Is there any user exit or any other way where we can put this restriction.
We cannot put the configuration for specific requirements either the configuration is on or off in total.
Any help would be greatly appreciated.
Thanks and Regards,
Ravi Kumar LHi Max,
In XK02 if we change any of the Sensitive fields(like name bank account,bank key...). then it pops up a message that document is saved but needs to be confirmed.
For confirmation we need to login to FK08 and then press the confirm buttom for that vendor.
Now our requirement is we need that confirmation for some vendor employee account group B007 and company code 2001 and for rest they donot need any approval and can be directly created or changed.
As Suggested by Himanshu and You I have been in touch with the Basis guys for the creation of a Z object and authorization so that i can call the Authorization object in the user exit.
they too are not sure. so i need to confirm them so that they can go ahead with the creation of the z object. Since this involves business we need to tell them if this is possible or not fore hand and take their approval.
Can you suggest if we are going in the right direction.
Thanks,
RK -
Is there any user exit for changing V1 field value?
Hello Expert,
Is there any user exit for changing V1 update value?
For example, sales order number will populate 2LIS_11_VAHDR-VBELN. If other value need to populate 2LIS_11_VAHDR-VBELN, can we use any user exit to customize the V1 routine?
Please forget the enhancement for 2LIS_11_VAHDR. Just populate the system field VBELN.
Thanks
F-B-IHi,
Use the 'usual' user-exit for transactional data in R/3 EXIT_SAPLRSAP_001 (CMOD). Here your can overwrite VBELN for each extracted record with the value you want.
Hope this helps.
Grtx
Marco -
User exit to change item level data in purchase order
Hi,
Can anyone let me know the user exit to change item level data in purchase order . there is a badi ME_PROCESS_PO_CUST for this but the issue is its method process_item gets triggered only when the item is changed. My requirment is
For purchase order document types u201CZSOu201D and u201CZCOu201D, where the purchase order is a u201CLimits Orderu201D only i.e. no materials or services on the purchase order, the print price indicator field should be set to u201Cblanku201D (unchecked). now i cant use ME_PROCESS_PO_CUST because process_item wont get triggered if there is no change in itemlevel data.
Regards,
RahulHi Rahul,
Probably EXIT_SAPLMEKO_002.
hope it helps,
Edgar -
Is there any user exit in CRM_MKT_JOB_WIZARD
Hi All,
Is there any user exit in function module CRM_MKT_JOB_WIZARD? We have a requirement, where user selects 'Immediately' while scheduling job, but still it should be pooled and run over night.
Thank you,
Regards,
Rajesh.Hello,
There is a very easy way to find any BADI setting a breakpoint in class CL_EXITHANDLER.
Everything explained here:
How to find out the BADI triggered in transaction crmd_mktseg?
Regards,
Nicolas Busson. -
Help - User exit to change item level data in Purchase Order
Hi,
Can anyone let me know the user exit to change item level data in purchase order . there is a badi ME_PROCESS_PO_CUST for this but the issue is its method process_item gets triggered only when the item is changed. My requirement is For purchase order document types u201CZSOu201D and u201CZCOu201D, where the purchase order is a u201CLimits Orderu201D only i.e. no materials or services on the purchase order, the print price indicator field should be set to u201Cblanku201D (unchecked). now i cant use ME_PROCESS_PO_CUST because process_item wont get triggered if there is no change in item level data.
Thanks,
RahulHi Rahul,
Probably EXIT_SAPLMEKO_002.
hope it helps,
Edgar -
Is there any user exit in IW54 before document saving?
Dear experts,
Is there any user exit in IW54 before document saving? I want to check some data before saving.
thanks
LanceOr BADI NOTIF_EVENT_SAVE (Change When Saving Notification)
PeteA -
Is there any user exit after saving the material doc
Hi,
Is there any user exit in the T-code:mb01/migo after saving the material doc,?I want to record some data when the doc is saved.
thanks,
lanceHi
Please check <i>The enhancement MB_CF001, includes a function module that is called up immediately before the COMMIT WORK when a goods movement is posted.</i>
Regards
Ramakrishna -
Any user-exit to change VBAK from VA02?
Hi all,
I have an urgent problem to fix in few hours but so little ideas for the moment, in deed I have to fill the field VBAK-STCEG_L in T-codes VA01, VA02, VA21, VA22, VA41 and VA42 according to some conditions from table VBPA, I can't find any user-exit or BADI to implemant my code so any solution would be welcome.Hi,
These are the availble Enhancements and BADIs
Enhancement
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
V46H0001 SD Customer functions for resource-related billing
V45W0001 SD Service Management: Forward Contract Data to Item
V45S0004 Effectivity type in sales order
V45S0003 MRP-relevance for incomplete configuration
V45S0001 Update sales document from configuration
V45P0001 SD customer function for cross-company code sales
V45L0001 SD component supplier processing (customer enhancements)
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45E0001 Update the purchase order from the sales order
V45A0004 Copy packing proposal
V45A0003 Collector for customer function modulpool MV45A
V45A0002 Predefine sold-to party in sales document
V45A0001 Determine alternative materials for product selection
SDTRM001 Reschedule schedule lines without a new ATP check
Business Add-in
BADI_SD_SCH_GETWAGFZ Scheduling Agreement: Read WAGFZ from S073
BADI_SD_V46H0001 SD Customer functions for resource-related billing
Regards,
Satish -
Billing user exit to update service rendered date
Hello,
My client would like to determin the rebate conditions based on billing date. However, the system only uses the service rendered date for rebate determination.
Therefore, I am trying to overwrite the service rendered date with billing date at the time of billing creation.
Could you please let me know what user exit I can use?
I can't user the user exit RV60AFZC because the billing date is not determined when this user exit is running.
Your help would be appreicated! I will give you good points! ThanksHi Londa,
Is this question for BW? Otherwise, you'd better post it in the ABAP forum.
You can do that in the extraction User Exit, RSAP0001 (FM EXIT_SAPLRSAP_001).
Regards,
Diego -
Restricting Saler Order Target Quantity to be = 100 ( any user exit )
Hi Friends,
In transaction VA01, while creating a sale order, it asks for reference document number, after we copy the reference document number the No of quantities (item level ) will be copied to the new Sale order .
My requirement is : the target (total - VBAP-ZMENG)quantity should not exceed the reference quantity (VBAP-ZMENG) ......
Is there any user exit/BADI for this ?????
Expecting your answers!!
Thanks in Advance
Cheers,
R.Kripa.Hi Srikanth Pinnamaneni ,
Thanks ... but what is "USEREXIT_CHECK_VBAP", in which transaction we should see that ??????
Thanks in advance
Cheers,
R.Kripa.
Hey ya i got that ..... thanks ( SE38 - MV45AFZB )
Message was edited by: Kripa Rangachari -
Can we add additional fields in work center creation using any user exit ?
Hi,
is there any user exit using which we can have some tab and fields such that we can add/ update the equipment to wotk center in CR01 ?
regards,
madhu kiranhi,
requirement is can i get the additional fields like equipment and asset in the work center creation ?
i would like to maintain these against a work center
and using any user exit can i add additional fields ?
regards,
madhu kiran -
Are there any user exit for ess travel?
Hi all
I want to ask,
are there any user exit for ess travel?
and if I want to know if we already had enhancement for back-end system (sap gui)
is it automatically applicable to ess too?
many thankscheck this
ESS: BAdi for Checking Mileage
Thanks
Bala Duvvuri
Maybe you are looking for
-
New Customer Field in Shopping Cart (SRM) with default value
We have requirement to add new Customer field in Shopping cart (SRM 4.0) and assign a default value to it. We have added the custom field and also assigned default value 'X' to it using BADI BBP_CUF_BADI_2 method MODIFY_OUTPUT. Problem we are facing
-
I would like to know if someone could help me I would like to find a 3rd party app. that allow me to see my iPod touch in finder can any one help me please? 2nd gen 32 gig
-
Screen Light. (Gone with the wind)
how to I get my screen light to come back on. the ipod works and i have memorized all the touch applications but the screen light does not work. suggestions anybody?
-
Application in debug mode?
I want to look at some shared objects in the Media Server administration page, but when I click on them I get the error "Failed to make a debug connection." Does the main.asc have to be running in the development environment in order to view the cont
-
Hi All, I went to run a query in SQL Management Studio the other day and realized that the v_GS_VIRTUAL_MACHINE table missing the PhysicalHostName0 and PhysicalHostNameFullyQualifi0 Columns. I reviewed the Configuration.mof and SMS_def.mof files and