Any value in the Rapid Charger? and other charge related questions
Ok, I think I have calmed down. I will keep my playbook. But some issues still continue to burn me. The lastest, the time to recharge off the provided wall-charger.
- So does anyone here have the Rapid charger? Does it really work faster than the wall-charger?
- WIll the playbook charge off a PC USB connection?
- Will the Playbook charge off a standard 9700 or 9800 charger?
thanks
8100, 8900, 9800, and Playbook owner
paulypaul wrote:
- So does anyone here have the Rapid charger? Does it really work faster than the wall-charger?
The provided wall charger works pretty fast for me, I was actually surprised how quick.
- WIll the playbook charge off a PC USB connection?
Yes, slowly. Much slower than the provided charger.
- Will the Playbook charge off a standard 9700 or 9800 charger?
Ditto. Yes, slowly. Much slower than the provided charger.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
Backup VHD size is much more than expected and other backup related questions.
Hello,I have few windows 2008 server and i have scheduled the weekly backup (Windows Backup) which runs on saturday.
I recently noticed that the actual size of the data drive is only 30 GB but the weekly backup creates a VHD of 65 GB.This is not happening for all servers but for most of the server.Why is it so..and how can i get the correct VHD size..60 GB VHD does't make
sence for 30 GB data.
2. If any moment of time if i have to restore entire Active Directory on windows 2008 R2 then is is the process same as windows 2003..means going to DSRM mode,restoring the backup,authoritative restore or is there any difference..
3. I also noticed that if i have a backup VHD of one server (Lets Say A) and if i copy that Backup to other server (Let Say B) then windows 2008 only gives me an option to attach the VHD to server B but through backup utlity is there any way to restore the
data from the VHD,Currently i am doing copy paste from VHD to server B data drive but that is not the correct way of doing it..Is it a limitation of windows 2008?
Senior System Engineer.Hi,
If there are large number of files getting deleted on the data drive, the backup image can have large holes. You can compact the vhd image by using diskpart command to the correct VHD size.
For more detaile information, please refer to the thread below:
My Exchange backup is bigger than the used space on the Exchange drive.
https://social.technet.microsoft.com/Forums/windowsserver/en-US/3ccdcb6c-e26a-4577-ad4b-f31f9cef5dd7/my-exchange-backup-is-bigger-than-the-used-space-on-the-exchange-drive?forum=windowsbackup
For the second question, the answer is yes. If you want to restore entire Active Directory on windows 2008 R2, you need to start the domain controller in Directory Services Restore Mode to perform a nonauthoritative restore from backup.
Performing Nonauthoritative Restore of Active Directory Domain Services
http://technet.microsoft.com/en-us/library/cc816627(v=ws.10).aspx
If you want to restore a backup to server B which is created on server A, you need to copy the WindowsImageBackup folder to server B.
For more detailed information, please see:
Restore After Copying the WindowsImageBackup Folder
http://standalonelabs.wordpress.com/2011/05/30/restore-after-copying-the-windowsimagebackup-folder/
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
In the middle of an update, it call closed. Itunes keeps saying that it's not installed, even though ive tried reinstalling multiple times. All my iphone is doing it showing the ituns symbol and a charger. How can I fix this???
Hi lepyykko,
If I understand your question, you are trying to update your iPhone, but you are seeing an error message that iTunes for Windows is not installed, is that right? The first step is to get iTunes successfully installed on your computer. Then backup the iPhone before updating the iOS software.
Are you seeing any error messages when you try to install iTunes for Windows?
If you can't install or update iTunes for Windows - Apple Support
https://support.apple.com/en-us/HT201668
Are you able to update your iPhone wirelessly?
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
https://support.apple.com/en-us/HT204204
Before you update
Back up your device to iCloud.
Update your device wirelessly
The easiest way to update your device is wirelessly, also called “over the air.” Here’s how:
Plug in your device to a power source.
Tap Settings > General > Software Update.
Tap Download and Install. Updates might download automatically while your device is connected to Wi-Fi and a power source.
Tap Install, or tap Later to install the update later. If you use a passcode, you'll need to enter it before installing the update.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
https://support.apple.com/en-us/HT201263
I hope this information helps ....
- Judy -
Need to take a value from the csv file and query in a OAF page.
Hello,
I have a requirement to take the list of employee numbers in a csv file and display its corresponding job on the page.
I have created a item 'MessageFileupload' where the user will upload the csv file containing the employee number and a Button 'Display Jobs' which will display the corresponding jobs on the page.
Any idea how to take the values from the csv file and query it?
Regards,
den123.Hi ,
Check
http://oraclearea51.com/contribute/post-a-blog-article/csv-file-upload-for-oa-framework.html
http://www.roseindia.net/jsp/upload-insert-csv.shtml
Below code works from above blogs.
package xx.oracle.apps.pa.Lab.webui;
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStreamReader;
// import java.io.*;
import oracle.apps.fnd.common.VersionInfo;
import oracle.apps.fnd.framework.OAApplicationModule;
import oracle.apps.fnd.framework.OAException;
import oracle.apps.fnd.framework.server.OAViewObjectImpl;
import oracle.apps.fnd.framework.webui.OAControllerImpl;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.jbo.domain.BlobDomain;
import oracle.cabo.ui.data.DataObject;
import oracle.jbo.Row;
* Controller for ...
public class deptCsvUploadCO extends OAControllerImpl
public static final String RCS_ID="$Header$";
public static final boolean RCS_ID_RECORDED =
VersionInfo.recordClassVersion(RCS_ID, "%packagename%");
* Layout and page setup logic for a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
* Procedure to handle form submissions for form elements in
* a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
// Code Addition Started for CSV upload
OAApplicationModule am = (OAApplicationModule) pageContext.getApplicationModule(webBean);
OAViewObjectImpl vo = (OAViewObjectImpl) am.findViewObject("deptCsvVO1");
//if ("GoBtn".equals(pageContext.getParameter(EVENT_PARAM)))
if (pageContext.getParameter("GoBtn") != null)
System.out.println("Button Pressed");
DataObject fileUploadData =(DataObject)pageContext.getNamedDataObject("FileUploadItem");
String fileName = null;
String contentType = null;
Long fileSize = null;
Integer fileType = new Integer(6);
BlobDomain uploadedByteStream = null;
BufferedReader in = null;
try
fileName = (String)fileUploadData.selectValue(null, "UPLOAD_FILE_NAME");
contentType =(String)fileUploadData.selectValue(null, "UPLOAD_FILE_MIME_TYPE");
uploadedByteStream = (BlobDomain)fileUploadData.selectValue(null, fileName);
in = new BufferedReader(new InputStreamReader(uploadedByteStream.getBinaryStream()));
fileSize = new Long(uploadedByteStream.getLength());
System.out.println("fileSize"+fileSize);
catch(NullPointerException ex)
throw new OAException("Please Select a File to Upload", OAException.ERROR);
try{
//Open the CSV file for reading
String lineReader="";
long t =0;
String[] linetext;
while (((lineReader = in.readLine()) !=null) )
//Split the deliminated data and
if (lineReader.trim().length()>0)
System.out.println("lineReader"+lineReader.length());
linetext = lineReader.split(",");
t++;
//Print the current line being
if (!vo.isPreparedForExecution())
vo.setMaxFetchSize(0);
vo.executeQuery();
System.out.println("Trimmed "+ linetext[1].replace("\"", ""));
Row row = vo.createRow();
row.setAttribute("Deptno", linetext[0].trim());
row.setAttribute("Dname",linetext[1].trim().replace("\"", ""));
row.setAttribute("Loc",linetext[2].trim().replace("\"", ""));
//row.setAttribute("Column4", linetext[3].trim());
vo.last();
vo.next();
vo.insertRow(row);
catch (IOException e)
throw new OAException(e.getMessage(),OAException.ERROR);
//else if (pageContext.getParameter("Upload") != null)
am.getTransaction().commit();
throw new OAException("Uploaded SuccessFully",OAException.CONFIRMATION);
}Thanks,
Jit -
I can't enter any value in the Text field, after loading flash files
Hi to all,
In my Java application, I'm using a text field and a panel to load flash files. I'm using JDIC 0.9.1 to load the flash files in the panel. The flash files are created by Flash CS4.
While running the application, I can't enter any value in the Text field, after minimize and maximize the application I can enter the values.
This problem happens after change the jre version from 1.6 to 1.7.
I'm getting the following exception while running the application.
org.jdesktop.jdic.init.JdicInitException: java.io.IOException: The filename, directory name, or volume label syntax is incorrect
at org.jdesktop.jdic.init.JdicManager.initBrowserNati ve(Unknown Source)
at org.jdesktop.jdic.browser.WebBrowser.<clinit>(Unkn own Source)
pls give me a solution.
Thanks in advance...:)I can't enter any values in JTextField after loading the flash files., locking.
-
You purchase properties in Arab game (Sultan desert), while the procurement process and the discount amount lost contact wrote the running game has been cooperation from them but the problem!
I can't buy any properties in the game itself and the science I don't use jailbreak and two free jailbreak is there a program hindered the procurement process so that I can buy anything from the storeHello milkisoo,
Wow! Purchasing a new computer and monitor should be a fun and exciting experience, and instead, it sounds like it’s turned into a complete nightmare. I can only imagine your disappointment when you found two charges relating to its purchase on your debit card account, and I’m sorry for any aggravation this caused.
As I want to provide you some piece of mind, I pulled up your order number using your email address attached to the forum. After review of its payment information, I found we collected only one payment. However, when orders are first placed on BestBuy.com, a pending authorization should show up on your bank card to make sure funds are available for the order until it is fulfilled. From there, the authorization should drop off and the collection charge should appear. This is the case for your one charge of $1,051.69.
It also sounds like an error may have occurred when you initially attempted to place your order, resulting in one of your gift cards not registering properly and the order not being completed. Your card’s issuing bank doesn’t appear to have recognized this and pushed through the pending authorization. This occurred a second time when your account information didn’t quite match up with what we had on file. Please know that we haven’t ordered a collection of these funds and your issuing bank should release the two pending authorizations within 5 to 7 business days.
Thank you for posting.
Alex|Social Media Specialist | Best Buy® Corporate
Private Message -
I tried updating my iPod 5th gen to iOS 8 but it only shows me a picture of the iTunes logo and a charger at the bottom, I'm not sure what this means or what I need to do. Can someone please help me?
After restoring to factory settings/new iPod you will then have to restore from backup
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Nice to see 13" retina but it has only Intel HD Graphics 4000 and does not have NVIDIA GeForce GT 650M with 1GB of GDDR5 memory card. How it will affect the speed, performance and other things compared to 15" retina where NVIDIA GeForce card is available.
The 15" Retina's will have better performance than any 13" Retina. Not only do the 15" machines have dedicated GPU's, but they also have quad-core processors, whereas the 13" Retina's only have dual-core processors.
-
Creation of a Query to show the values for the current month and the last 12 months data.
Dear All,
Good day!
I have to create a Query with the below requirement.
I have to create a Query to show the values for the current month and the last 12 months data.
Can you please guide me how to achieve this ??
thank you,
Regards,
HemaHema
explain the exact problem..? as you mentioned you want to create query to show values for current month and last 12 months.. so I think you want to show values for 12 months from current data.. you can achive this by multiple way..
you can have selection screen and field with date .. and restrict based on system current date and 12 months before or you can handle this at your target.. .. I mean there are multiple ways to restrict data by date range..
for some more hints..
http://www.forumtopics.com/busobj/viewtopic.php?t=34393&sid=7fba465d0463bf7ff5ec46c128754ed6
http://businessintelligence.ittoolbox.com/groups/technical-functional/cognos8-l/how-to-display-last-12-months-in-report-based-on-todays-date-3231850
http://scn.sap.com/thread/3217381
search on SDN you will get many other ways..
Thanks,
Bhupesh -
I have the latest Mac Air 13" and I have a Seagate 500MB external hard disk I cant copy or Cut any files on the hard disk and I cant even delete any files. I have the settings as Read and Write in the get info tab. Please helpand also note that my hard drive was formatted on a Windows 7 Laptop.
thats the problem, its in MSDos (Fat) or NTFS for Windows.
Options.....
1. offload all that data on the HD onto your PC, THEN format the HD in EXFAT for use on BOTH PC and Mac for read/write.....then reload all (or as you need) that data back onto the HD
2. get another HD, and format it for Mac OSX extended journaled.
FAT32 (File Allocation Table)
Read/Write FAT32 from both native Windows and native Mac OS X.
Maximum file size: 4GB.
Maximum volume size: 2TB
You can use this format if you share the drive between Mac OS X and Windows computers and have no files larger than 4GB.
NTFS (Windows NT File System)
Read/Write NTFS from native Windows.
Read only NTFS from native Mac OS X
To Read/Write/Format NTFS from Mac OS X, here are some alternatives:
For Mac OS X 10.4 or later (32 or 64-bit), install Paragon (approx $20) (Best Choice for Lion)
Native NTFS support can be enabled in Snow Leopard and Lion, but is not advisable, due to instability.
AirPort Extreme (802.11n) and Time Capsule do not support NTFS
Maximum file size: 16 TB
Maximum volume size: 256TB
You can use this format if you routinely share a drive with multiple Windows systems.
HFS+ ((((MAC FORMAT))) (Hierarchical File System, a.k.a. Mac OS Extended (Journaled) Don't use case-sensitive)
Read/Write HFS+ from native Mac OS X
Required for Time Machine or Carbon Copy Cloner or SuperDuper! backups of Mac internal hard drive.
To Read HFS+ (but not Write) from Windows, Install HFSExplorer
Maximum file size: 8EiB
Maximum volume size: 8EiB
You can use this format if you only use the drive with Mac OS X, or use it for backups of your Mac OS X internal drive, or if you only share it with one Windows PC (with MacDrive installed on the PC)
EXFAT (FAT64) ------Can read/write from both PC and Mac
Supported in Mac OS X only in 10.6.5 or later.
Not all Windows versions support exFAT.
exFAT (Extended File Allocation Table)
AirPort Extreme (802.11n) and Time Capsule do not support exFAT
Maximum file size: 16 EiB
Maximum volume size: 64 ZiB
You can use this format if it is supported by all computers with which you intend to share the drive. See "disadvantages" for details. -
Can't seem to download any app despite entering the correct password and answering 3 security question but still in the end it comes up the message that my session has timed out no matter what! Please help, many thanks in adv!!
Try doing it on your computer with iTunes and then sync to your iPad to see if it clears the problem.
-
In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like brush etc). Whenever I try to use a tool, a blue box appears around the line and I have to double click it to manipulate it, which opens just that line in a semi burred screen where all the other objects are semi-grey in the background. I can manipulate this line in this screen but nothing else at that time which I could do about 5 minutes ago. For exampe, I no longer can join up 2 lines drawn by the line tool together. For some reason this started randomly (probably due to a accidental shortcut combination) and I just can't put it back to what it used to be. I have inserted a video hopefully showing what I mean. Any help would be appreciated.
Thank you - Just what I needed
-
I clicked the button in my setting thatz is saying "software update iOS 6.1.2. It turned off and now My iPad 2 is stuck on a black screen that has the iTunes symbol and a charger that I'm guessing means "plug into iTunes". I did so and then waited four hours to download something. And now it is saying that its going to update my iPad but it isn't working. I tried to "update" twice. I am VERY ANNOYED beczuse the last time i updated it, it just turned off and i didnt have ot plug it in or anything. WHY IS IT DOING THIS.....?????? My ipad will not turn on or anything. Help me FIX THIS!!!
hi Kinney. last hour, i update my ipad 2, then im having the same problems as u. im also hoping people can solve this issue.
-
I plug my ipod in, and it says it needs to be charged and never charges or shows up on my computer. But it works in the charger. I cannot sync it, and the computer doesn't detect it. It charges in the charger, but as soon as you unplug it, the ipod shuts off. Doesn't charge in the computer at all.
Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
Default values for the controlling area and language
Hello
I have a query.
I need to set default values for the controlling area and language in the screen
"find account assignment data 1"
Is it possible to do so?
Thanks.
Jayawant GokhaleHello
To clarify,
This is the search used ,when I go for shopping.For the Cost assignment,the fields controlling area and language should be default for a user.
Could someone throw a light on this.
Thanks.
Maybe you are looking for
-
Bex Report issue - transaction data of type Char not dispalyed complete
Hi BI Expers , I have one issue related to Bex reports here I have complete data loaded in DSO , there is one field Job Title which is having a length of 60 char . When I am executing the report in Bex Analyzer , the value for Job Title is getting tr
-
How can I diagnose or resolve missing AD groups for target audience rules
Hello everyone, I'm having some problems with the target audiences I have set up in my SharePoint 2010 farm. I have set up a single rule for each target audience in Central Administration, pointing to a group in Active Directory. Up until a couple of
-
Open image in PS CS6 from LR 4.4 - found different PS app
Something weird happened today... I was in LR 4.4 and made the choice to open an image into PS CS6. I received the message that the Photoshop app had changed location, would I like to open the image. Without giving it much thought, I clicked on YES
-
Oracle ADF for weblogic server
Hi, Can I extend weblogic domain to include Oracle ADF my version of weblogic is 10.3.0.0 Thanks, Charan
-
Problems in editing To Do on E75 after being syncr...
After I add a todo to my phone i can change the time as long as i don't synchronize it. but once i synchronise it with MS Outlook 2007, any changes i made to time it says "Alarm set for later than entry starts" then i can't even move the cursor from