Any videos slow/stuck after upgrading to new Flash 11.8.800.94

After upgrading to the new flash 11.8.800.94 on Firefox 23, the videos are stuck. I have uninstalled and reinstalled any/all versions of Adobe Flash, but still the same issue. I went back to Flash 10.3 version For Windows and it works fine. But I am little skeptical in using it as it does not have protection for the swf security issues. Till then I plan to revert back to Chrome, as it as well as IE works fine with Flash 11.8 version. Pls let me know if you have any solution.

I also have the same issue, which started last week. I am running FireFox 23 on Windows 7. Flash 11.8x (and also 11.7x) causes Firefox to hang when opening a web page that has flash content on it. This issue is not with the flash video content playing as the web site is hangs before I even have a chance to launch the flash video. I have to start task manager in Windows 7 to kill the firefox process to get control of the browser back. I also went back to Flash 10.3 and the web sites are fine opening, no issues. Please let me know if you have any questions.

Similar Messages

My imac hangs up after upgrading to new os

After upgrading to new OS my imac hangs up where it never has done this before. My apple care has long sinse expired and I am really bummed. It was clearly related to the new OS. Any suggestions for relief?

If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there to Repair the Disk.

Slow responses after upgrade to lion

slow reponses after upgrading to Lion

Slower with Lion-----Same story as Texas Cats above.
Lion is killing me and my attention span was erratic to begin with...now I can't get anything accomplished.
Replaced my 80 GB hard drive with a new 160 GB HD and it did nothing!
I was told by Apple Genius Bar that more memory might be the answer but my mid-2007 MacBook is not supposed to be capable of handling more than the 2GB I have installed.
Idid the clean-up, cache cleaning, photo removal, etc. Just trying to access simple searches on Google or Safari via Verizon Fios can be excrutiating. So far I have spent $400. on upgrades, etc. and wondering if Lion should be uninstalled?

After upgrading the new operating system, it seems some useful features no longer work such as when typing a message the text anticipates the next word and when trying to delete individual messages from a contact, you can no longer tap and hold to select

After upgrading the new operating system on my Droid Razr M it seems some useful features no longer work such as when typing a message the text anticipates the next word and when trying to delete individual messages from a contact, you can no longer tap and hold to select multiple message you have to delete them individually or the entire thread. Is there a way to get these back?

Well, that's kind of embarrassing. And I honestly thought I paid attention to that... It works perfectly now, thank you so much!
As expected, cdm-git also works fine since DMs only work in the root mode as of now.
Just for the record, both type commands output "/usr/bin/startx" and pacman -Q gives "systemd 215-4".
Last edited by looki (2014-08-23 13:04:49)

HT201412 after upgrading to newer iOS version 6 only my iphone 4 got turned off.

hi ,
after upgrading to newer iOS version 6 only my iphone 4 got turned off. it could not turned.. contacted apple store they tried all the option .. solution was replace with other iphone4 by paying £119, Which is really not the new one, its refurbished one..

So what's your question?

Macbook pro slow internet after upgrade osx mountain lion

Slow safari after upgrade to osx moutain lion.

Have you reset Safari? Yet? Top left corner of the screen next to the apple logo click on the word Safari, then click reset safari, make sure everything is checked then click reset. Also try:
Repair your permissions. Go to applications then to the "other" folder then go to disk utility, on the left hand side you will see a white box. Select the second option, usually called "mac HD" with that selected click on "repair permissions" in the center towards the bottom of the screen. Wait for it to complete, then see if this fixes the issue.

After "upgrade" to new firefox, bookmarks didn't transfer. Help tells how to import from another browser but not old firefox. Also my anti virus (latest update) apparently not compatible with 4.0 Can I restore my old version

Question
After "upgrading" to new firefox none of my bookmarks are in new bookmarks help topics tell me how to import from another browser but not from previous version of firefox. Another problem is my anti virus ( most up to date) is apparently not compatible with 4.0 liked the old firefox would never have "upgraded" had I known my anti virus wouldn't work. Can I get old version back

Check with Kaspersky as to what versions of Firefox their programs are compatible with. It is up to Kaspersky to keep their stuff up to date as Mozilla releases new versions of Firefox. And if they are unwilling or incapable of doing it, they should inform their customers of such and maybe refund their customers instead of stringing them along.
http://forum.kaspersky.com/

New MBA extremely slow internet after upgrading to 10.6.7

Hey Folks, I have updating my brand new MBA to 10.6.7 and my internet is now extremely slow through the airpot. All of my other macs are running 10.6.6 and are very fast. Im using a new Airport Extreme base station, does anyone have any idea on how to fix this. LIke I mean its extremely slow online.
Thanks
Jason

Good day,
I'd like to confirm a few things:
What action/activity are you performing in Acrobat when it crashes?
Is the crash consistent at the same point?
You stated in the subject '..after upgrading to 10.6.7'
What OS was on your iMac when you purchased it?
Was this problem occuring when using an earlier verion of 10.6.x?
Have you applied to font update Apple released to address some of the problems they introduced with 10.6.7?
Did you perform a clean install of Acrobat on your iMac after you purchased it or was the application transferred in some way?
I hope we can get this resolved for you!
Regards,
David
Acrobat Community Manager
Adobe Systems

Does any one experience having slow performance after upgrading to lion? (I'm using an iMac early 2008 with 4gb memory)

I'm having a problem on my iMac early 2008 (2.4GHz Core 2 Duo 4gb SDRAM) after upgrading to Mac OS X Lion.
The animation such as mission control and full screen and especially, launch pad performs really slow.
Sometimes, mission control doesn't even show the animation.
This is terrible and I want Apple to fix these problems or otherwise this is just making my mac useless.
Does anyone experience having similar problem?

thanks for the reply!
I've checked the activity monitor but nothing was taking up the space expect for Flash Player (Safari Internet plug-in, which takes up 29% of CPU)
here's my screenshot. can you see any problems?
and here's another

IMac is running slow again after upgrading Memory to 6 GB 800 MHz DDR2 SDRAM. Mail is especially slow. I have searched the community info, but I am really a novice and most of the solutions appear to be beyond my level of proficiency. Please help!

I am at a loss. even after reading other questions and responses. After upgrading to Mt. Lion, everything on my iMac slowed down. I knew more memory would be needed, so I went from 2G to 6G. That worked for awhile, but now, about 3 weeks later, things are slowing down again. Mail is especially slow, when moving from one message to another, and also just plain typing is delayed in mail. iPhoto has had the spinning wheel issue since change to Mt. Lion, but it eventually stops and the app itself is functional, so this is just annoying as much as anything.
Any easy, simple to follow instructions would be appreciated. Is it better for a novice to take to the Genius Bar or to an approved Mac repair center in my area, rather than attempt some of the solutions I've seen offered here. And, if I do, what's the likelihood the issues will be resolvable?? Clearly, I am not the only one with this issue ...
Thanks for any help you can offer.

There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

HD Steaming video now choppy after upgrading to 10.6

Back when I was running 10.5 I could stream HD videos from Youtube, Hulu, etc without problems. After upgrading to 10.6 the lower resolution video plays normally, but once you go to 720p+ the processor usage climbs and the video starts to stutter. I run a 2.33 Core2Duo Macbook Pro, 3GB RAM, RadeonX1600. Flash is of course upgraded to 10.x, so it's not an issue there. I've seen plenty of discussions about this issue from my searching, but I can't seem to find any solution. Thanks in advance!

I have tested with Safari and Firefox. After a TON of digging through Google I found an article that ultimately helped. I did a full uninstall of Adobe Flash player, then reinstalled the latest version. I don't know if it's newer than the one I was trying before this. After installing, I did a verify/repair permissions through Disk Utility. One of the permissions needing to be repaired was a flash player file. After this I ran Netflix at HD quality and it was much better. It wasn't 100% perfect, but I assume that was because of my "older" hardware. I'm going to mark this as solved, so if anyone else has this problem, give it a shot.

Can't use my old HDD after upgrading with new one,old is GPT protected

Hi everyone! First of all I would like to thank you in advance!
Recently I upgraded my old HDD on my MacBookPro. I made a clone of the old disk, installed the new one in the MBP and putted the old one in external enclosure. Now I'm trying to use the old disk with the enclosure, but it doesn't appear in Finder, it appears in Disk Tools, but I can not perform any actions on it. I tried to erase it, but with no success! The old disk is GPT protected and I don't know what to do. Tried to erase it with Windows and Linux with no success neither. I know the enclosure works because it recognize every other disk, but my old one is untouchable to my Mac OS! I'm looking for possible ideas on how to make my old HDD usable with the enclosure?

Can't really help with your Internet issues, but I can put you on the path to leaning more about Macs.
If you're a former Windows user, there many resources on Apple's web site to get yourself familiar with how Macs and OS X work.
Here ard a few areas to spend time with
http://www.apple.com/support/macbasics/
http://www.apple.com/support/imac/intel/
http://support.apple.com/videos/
http://www.apple.com/support/lion/
http://www.apple.com/support/osx/
For the video tutorials, in the video search box, just type in OS X. You'll get a list of OS X video tutorials to watch as you learn to use your iMac.
Start with the Anatomy of a Mac video first, Then the Finder Basics video second. After you have watched and put to use these two videos, you can watch any other OS X video you want in any order.
Here is a free eBook download of David Pogue's OS X Snow Leopard The Missing Manual here. While OS X 10.7 LIon and OS X 10.8 Mountain Lion work a bit differently than OS X 10.6 Snow Leopard, there are many things that still apply.
http://it-ebooks.info/book/337/
Good Luck!

Very slow encoding after upgrade from 5.03 to 5.5 with MXO2 mini

Hi all.
After upgrading from CS5.03 to 5.5 my encoding now takes 5 times as long. A 2 minute HD Video file would take 2 minutes, and still does on the PC I haven't upgraded (identical almost) but now with CS5.5 it takes almost 11 minutes.
Some explanation....
I create HD MJPEG files on a PC with Blackmagic Decklink.
I transfer these files to an HPz800 which used to run CS5.03 with Matrox Utils 5.1.1.37 and an MXO2 Mini with Max. (Nvidia Quadro fx4800 and 12GB of RAM)
On a Blackmagic timeline HD 1080i MJPEG with filters of Auto Color, Fast Color Corrector and Gamma correction a 2 minute timeline would encode in 2 minutes give or take a couple of seconds.
Now with CS5.5 and Mtx 5.5 an identical file takes 11 minutes to encode to Microsoft avi - Matrox 1920 x 1080i - 25fps.
If I remove the filters (which I need to be able to use) it will come down to 2 minutes as it used to be.....so it seems to be the filters are now slowing things down when they never used to. I have never rendered before exporting. Ever. So this time I tried rendering first and it brought the 11 minutes down to 7 minutes but when taking into account the 4 minutes rendering time I am no better off.
I have updated CS5.5 to CS 5.5.1 and MTX Utils to 5.5 and then 5.5.1 and it makes no difference. Still 11 minutes to decode 2 minutes with three filters, which is exactly what I have always been doing but now it doesn't work....
Can anybody help? or make a suggestion as to why using filters in 5.5 now multiplies the encode time by 5 when it never used to. Everything else bar Matrox Utils on this machine is as it was before the upgrade to 5.5 and as I say my older machine is still 5.03 it can do it all in 2 minutes even with the filters intact.
So have I really spent a small fortune upgrading to make my output 5 times slower. Not happy......

To go further, every single encode that I have done is slower than it was before with CS5.01 or 5.03.
This is odd because going from Blackmagic to any other codec doesn't necessarily need the Matrox box or Matrox utils
Blackmagic HD or SD to
Matrox HD
QT HD MP4
QT SD DV25
DV AVI SD
Mpeg2 - DVD
Every single encode is slow by 2x to 6x.
Why should Blackmagic HD to QT MOV MP4 take twice as long as it used to...... having said that The speeds I am seeing now are what it was like before I attached the box in the first place, whether a Matrox codec was involved or not.... It is acting like a blocked funnel. when it used to be a lovely wide and clear funnel.
Anyway Matrox have reproduced the problem and are investigating, so hopefully there will be an answer soon....

Painfully slow internet after upgrading to Snow Leopard

hi all, i recently upgraded to Slow leopard.
My internet has soon become painfully slow, taking (literally) minutes to load pages. I have checked my modem & router, they seem to be fine as my iPhone & Vista laptop run perfectly on the same network.
does anybody know what this could be?

If you have not done so since upgrading to Snow Leopard, you should run Disk Utility and use +Repair Disk Permissions+.
Have you used Software Update to apply Apple's latest updates after upgrading to Snow Leopard. If there are updates, you should run it a second time to ensure there were no dependent updates.
As a test, you can create a new admin user account in System Preferences Accounts pane.
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8235.html
Log out and log in to the new account. Try the things that caused the problems. Is it fast in the new account, or is it the same? If it is fast, then the cause is likely to be in your normal user account. If it is the same, then the cause is likely to be with the overall system (the OS).
You can also try doing a Safe Mode startup
http://support.apple.com/kb/HT1455
This will do some maintenance during startup and also load only Apple's essential system extensions and processes. Any third party software you have installed will not automatically run. Check the performance while in safe mode, and if there is improvement, restart normally to see if the problem comes back or not.

Cannot view any Videos on Youtube after installing flash 10

Hi there.
I had my day off today and have been viewing videos on youtube all day.   I had adobe pop up to say that I should upgrade to the newer flash version and I did this. Afterwards I went back to youtube to continue watching the videos and now I get an error message "An error occurred, please try again later."
I have followed all the advice I could find.   I uninstalled all adobe programs and rebooted the comp then installed again and I still get the same thing.   I downloaded the offline uninstaller and ran it 5 or 6 times then reboot and installed and again same thing.
I am using Vista and I have never had any problems with viewing videos.   I use Firefox as my browser, but Internet Explorer is experiencing the same difficulty for me when I checked it.
Please help me out.   Tried to figure it out on my own but I'm stuck.
Thanks!

Sounds like the problem I was having. Places like YouTube kept asking to upgrade to a new version (which I did) and to check that I had Javascript enabled (which it was). I tried installing new versions of FlashPlayer on several occasions and they seemed to work, but FlashPlayer 10 was clearly not working.
I found a support page http://kb2.adobe.com/cps/494/cpsid_49419.html that directed me to use the standalone uninstaller, then use a Microsoft SubInAcl Registry tool to fix some pemissions in the registry. Then I installed a new version of FlashPlayer and everthing has been working well since. I have no idea hour the registry permissions got messed up in the first place.

Any videos slow/stuck after upgrading to new Flash 11.8.800.94

Similar Messages

Maybe you are looking for