Any Vodafone INDIA user on 5S with 2G/ 3G toggle ?

I've initially update to iOS 8.0 and didn't liked it so rolled back to 7.1.2 (in time when signing window was open).
Any Vodafone India user update to iOS 8.1 and still have ability to toggle 2G/ 3G on 5S.
Country: India
wireless Carrier: Vodafone India 16
iPhone: 5S
current iOS: 7.1.2
Modem Firmware:2.18.02

No one in community...
Come ON......

Similar Messages

IPhone 3g Vodafone India users experience?

Hey Guys,
I am in India and am planning to buy the iPhone 3g through Vodafone. I wanted to know what the experience of users have been in India (Bangalore) in terms of service, reception and issues. This forum is pretty helpful in getting all the information in terms of drawbacks, issues etc as far as the phone is concerned, but atleast in countries like US you have the Genius bar etc where you can go with your issues. Whats the service like in India. It would be great if any user using it gives the feedback with the actual problems faced rather than generic statements (No offence meant). Its around 30,000 INR so need to check on that. I know of all the drawbacks, so no need mentioning that, just the user experience in India.
Cheers!

Sorry folks, I was not aware of caps issue. again I am posting my problem.
I purchased the iphone from vodafone india (serail no. 84831yj7y7h). My iphone is giving me problem since the time I purchased it. It’s ringer gets off on its own and sometime network fails and it hangs. Home button responds very late. Earlier the problem was not so frequent but since last year and a half the frequency of this problem increased. I have become a laughing stock with my friends and family.
Every possible solution was tried by vodafone but of no help. As earlier Apple had arrangement with Vodafone for service in india.
Now, as Apple have started giving service to iphone in India, I approached Apple they asked me to pay Rs10,700/- for replacement of a defective piece, which is exorbitant because apple has launched iphone 3G in india for Rs19000/-. I would have agreed to pay the amount if they were to replace with iphone 4.
I am a patron of apple owning macbook, ipad2, ipod.
I feel cheated first being delivered with a defected piece,then being asked for such exorbitant amount for replacement.
I have called the customer care and vodafone but no one hasany answer. I have lost hope. Now i have no choice but to sell it insecond hand market and by some other brand handset.
No one listening what to do.

I am from India using my iphone4 with Vodafone and firmware version 5.0.1(9A405). I am unable to access 3G from my device as the CELLULAR DATA NETWORK option in the settings is missing. Any methods or options for fixing the same????

I am from India using my iphone4 with Vodafone and firmware version 5.0.1(9A405). I am unable to access 3G from my device as the CELLULAR DATA NETWORK option in the settings is missing. Any methods or options for fixing the same????

I am from India using my iphone4 with Vodafone and firmware version 5.0.1(9A405). I am unable to access 3G from my device as the CELLULAR DATA NETWORK option in the settings is missing. Any methods or options for fixing the same????

Why iphone not in india with carrier locked like vodafone india, airtel etc.

why iphone not in india with carrier locked like vodafone india, airtel etc.
why only unlocked phones in india?
means indian gov not providing u to contract indian mo.service providers or else?
why u r not contract with any indian MSP for 2 years like us,uk.and others.
please slove this queary please
thanks
abhishek

Nobody here wouild know that.

Vodafone India customer....on my iPhone5, imessage and facetime are giving error "waiting for activation"

Hi
I have iPhone 5 with Vodafone India connection. The major challenge is Facetimche & iMessage giving error "waiting for activation"
I have tried all the available solutions in Google search but still no change.....
Please help in getting this sorted out!!!
Thanks
Atin

Level 1 (0 points)
chakkochi
Re: My iMessage still says "Waiting for activation..." Jun 17, 2012 10:04 PM (in response to bradfromwinnipeg)
Hi All,
This problem is solved for me, with some help from the carriers. At last
Let me describe my situation once again.
I am from India, where the official iPhone carriers are Airtel and Aircel.
I have two prepaid connections - One from Airtel and one from Reliance GSM
Whenever I try to activate iMessage from my Reliace SIM, it shows activation unsuccessful, the the receive at shows my email ID only.
But whenever I try activate it using Airtel SIM, it activates just fine. But since my primary connection is the Reliance one, I wanted it to get activated for Reliance.
I have tried every tweaks/restore etc mentioned in this discussion, but nothing worked.
The solution:
This does not require any jailbreak/restore. Just a little help from the carrier.
For all reliance GSM customers in India, you can just try to activate in again. I think they have solved it for all customers.
I was almost lost hope of activating imeesage on Reliance. But then one of my friends bought a new iphone (4S). He had a docomo connection, and he also had this same issue. But using his contacts in docomo, he enabled some trace in his connection, and found out that the phone was trying to send SMS to a UK number (short code), which is blocked by their RA team.
This is that magic number : 00445773142076
So from him, I got the number. I raised a complaint with Reliance.
The complaint had nothing about imessage, but it said: "I am unable to send international SMS to the number 00445773142076, even after having sufficient balance and an active SMS plan"
So they have done some 'unblocking' and called me this morning and asked to try again 'sending sms to the same number' . I went to settings and activated imessage and facetime/ Thats it !!!!.
A big thanks to Reliance GSM support for the quick solution.
For anyone on Reliance GSM in India, just try activating it now.
For others, log a complaint with the carrier that "you want to send SMS to the number 00445773142076.
Thanks all

Iphone 4 bought from apple uk and using it on vodafone india

Hi Apple Uk team
I bought a Iphone 4 from Apple UK - via a website shopyourworld.com - which ships the phones to India from Apple UK.
I received the phone and have set it up with my Indian SIM - mobile no. (removed for security) , however the phone says that "Restriced network - Your selected cellular network is restricted. You can choose different network in settings" and also says " Waiting activation"
I was using a iphone 3gs on Vodafone India earlier and everything is fine about the SIM I am using.
Infact on this Iphone 4 , I am able to browse the Edge network and check mails etc, but I cant make phone calls ( it shows Zero Signals on Vodafone India network) or send smses.
Can you please help me on how to sort this issue out , the phones IMEI Number is (removed for security)
Let me know if I can help you with anything else ?
thanks
Mohit Maheshwari

Im assuming that you have cut down your sim to a micro sim. If you cut any areas of the metal contact that may cause some abstraction or damage, making the iPhone not able to fully function. Make sure that the metal area of the micro sim card is not damaged. If not, connect the iPhone to your computer and open iTunes to activate the iPhone. If it is unlocked it would ask you to register the iPhone and you will see the home screen on the iPhone. IF THIS DOES NOT WORK YOU MAY HAVE DAMAGED THE CONTACTS OF THE SIM CARD RESULTING IN THE IPHONE NOT BEING ABLE TO FUNCTION CORRECTLY.

Vodafone India - iPhone activation could not be done?

I completed my iPhone 4S contract with AT&T USA and now moved to India. I got a Vodafone sim card since I was originally using the carrier, and tried to use it on my iPhone. When I did so, the phone started up and asked for language selection, country selection and then went to a screen that said "Activating Your iPhone". It does not go past this screen at all. It fails to activate it.
I called up AT&T and also Apple Support. They say there is nothing on their end at all. Vodafone customer care representatives are not familiar with iPhone, but based on my discussion with AT&T and Apple support, I guess that this has something to do from Vodafone India's side. Any help here is appreciated. I do not wish to jail break my phone for any reason.

Did you get the phone unlocked by AT&T before you left for India? If not, then it will only work with an AT&T SIM. AT&T will unlock the phone for current or former customers who have completed the terms of their contract, or who have paid the early termination fee, or who purchase a no commitment phone and can provide proof of purchase.
I don't see anywhere in your description of events that the phone is unlocked... In fact, it appears that the phone is still under contract.

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

The link is to a discussion started on 12/18 in the FiOS Internet forum. Here's the link I get now, however it is different than the link I pulled a few hours ago. If this system changes the link again, it may not work.
http://forums.verizon.com/t5/FiOS-Internet/Frustration-and-just-confused-with-internet-help-please/t...
You can also look for the topic, "frustration and just confused" in the FiOS Internet forum.
Here's a link that is in the thread that gives more detail.
https://secure.dslreports.com/faq/15984
Good Luck!
P.S. "Copper Contributor" is my "rank." gs0b is my user name.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Any one else have these problems with Mavericks 10.9.3?

I've observed the following wiith Mavericks:
If the system has multiple user accounts on it, it will start, erratically it seems, running background processes with those user IDs. With com.apple.IconServicesAgent eating up sometimes nearly 300MB of memory, this can get to be a memory wart hog.
It appears to be using about 20% more memory.
The fans are coming on a lot more, indicating the CPU is being taxed.
Erratically and inconsistently "losing" external drives on sleep.
High levels of memory compression when there was none before.
I reported on item #1 last night with this link:
https://discussions.apple.com/message/25807061#25807061
I monitor system activity with a tool named Performance Probe which shows the memory usage the old way (pie chart) and then bring up Activity Monitor to get the deteails. After rebooting one time, Performance Probe showed nearly 3GB out of 4GB of memory in active use right after booting, this used to report less than 2 GB. The exact same thing happened as in the link above, but in this case every single user account on the system had an instance of cfprefsd, launchd, distnoted, and com.apple.IconServicesAgent with IconServicesAgent being the "Grandaddy" of memory consumption. I used Activtiy monitor to kill all the launchd processes in the unused (not logged into) accounts followed by the rest and they never restarted.
Observation: For some reason the OS seems to erratically decide to launch or not launch all these other user accounts. Sometimes Activity Monitor will just show me and the normal system accounts on the sytem, other times it appears to be more or less a crap shoot as to what processes have been started under what users name.
For item 2, normally 10.9.2 was showing about 2.1G of RAM in use now it's running about 2.4-2.5GB. All that I typically have running is Safari and Mail and thats when I noticed this increase.
Item 3 is just an observation, but it tells me the CPU is doing a lot more work to do the same things it did before.
For item 4, I'd heard of this before but I'd never seen it, until now. If external drives are connected to the system and the system goes to sleep, when you wake it up the OS will say the drive and it's volumes were incorrectly ejected. This happens erratically on USB drives. To simulate it I set the sleep interval at 3 minutes and let it go to sleep several times. Sometimes the drives would be there, sometimes I'd get the unmounted message. I should also note that the first time I rebooted Mavericks after the update it didn't see my Firewire external drive but has since then.
I noticed item 5 after using Safari and Mail for a while. The system more or less came to a crawl, fans came on high speed, Perfomance Probe was showing about 3GB of RAM used (RED) with the other 1GB completely blue, which means it's not active but swappable. This was weird because I'd never seen the system "pegged" like this. Usually there's free memory showing up. I opened up Activity Monitor to get the details and it showed that about 1GB of RAM was compressed. This has never happened before. The only things in use were Mail and Safari, and I'd guess I was probably using Safari to go to weather.com.
I have never had or witnessed any of these problems before.

An update:
For item 1, I suspect that when the other accounts were used, the users left them in the modes to reopen applications etc when restarting. This is a laptop and it's shared in the field by several people. By getting everyone to log into the accounts and turn that feature off, it limited the number of automatic processes that would restart. By opening up Activity Monitor, and first killing launchd for each of these unused accounts, then the rest of the processes, it seems to have cleared that problem up. This system has been through several OS upgrades so it's quite possible some people may not have used this thing since Lion or Mountain Lion were on it. I am, of course, talking about killing launchd associated with people not using the system, not an active version of it.
As far as items 2, 3, and 5 go, any time Safari needs to run some video this problem seems to surface. It doesn't seem to happen with other browsers.

After doing a Google search, I click on a link and go to the searched web page. When I go back to the Google page using the back button the links I originally clicked on no longer show as "greyed out". Any idea what is going on with the browser?

After doing a Google search, I click on a link and go to the searched web page. When I go back to the Google page using the back button the links I originally clicked on no longer show as "greyed out". Any idea what is going on with the browser?

Type '''about:config''' in the Location (address) bar and press the "Enter" key. When you see a warning, click '''I'll be careful, I promise!''' button.
* Preferences that have been modified are shown as '''bold (user set)'''.
* Preferences can be '''Reset to the default''' or changed via the right-click context menu.
-> In the '''Filter bar''', type '''browser.sessionhistory.max_entries'''
* Right click the preference '''browser.sessionhistory.max_entries''' and click '''Modify'''
* Change value from 0 to whatever you want over 0 (Default value is 50)
* click OK
-> Close the '''about:config''' tab and then Restart Firefox.
See this post:
* https://support.mozilla.com/en-US/questions/860894#answer-229574
Check and tell if its working.

Lightroom 2.5 not printing with main account user but prints with a new use

I have been troubleshooting all day. My new epson r280 is not printing with LR2.5 though it prints in other applications fine. Called epson and we are sure that I have the latest drivers, etc. Called Adobe and they had me create a new user in accounts in system preferences-accounts. When I tried printing from the "test user" LR printed with my epson printer. Adobe said the problem was with my system permissions and I had to reset my system permissions. This doesn't sound right to me. I ran disk utility and repaired my permissions but LR still doesn't print using my original user. Genius Book suggests going to Library-Preferences and to delete the plist. Does this sound right? And do I delete the p-list for LR or for the epson printer? What happens when you delete a p-list? Will I lose my catalog in LR? I would appreciate any help on this problem.

Just trying again to see if anyone has any solutions for this question. Thanks

OID users ( EUS) problem with grant create table with admin

Hi,
We activated enterprise users in the OID.
There is a role APP_ADMIN that has the following grants:
create user
drop user
create table with admin option
this is for an application that creates BI schemas, so it needs to be able to create other users.
I have granted these to a local role, and the user has access to the local role, thanks to the OID setup.
The create and drop user work.
however, the grant create table to another user does not work.
Is there an issue with 'with admin option' grants in Enterprise user security?
Regards,
Peter

If I grant
grant create table to test_role with admin option;
it does not work
if I grant
GRANT GRANT ANY PRIVILEGE to test_role WITH ADMIN OPTION;
it does work.
The test command as user with test_role is:
grant create table to test_usr;
very strange!
If the user is a standard user and I create role test_role
and grant create table to test_role with admin option it works.
but if I convert the user to an EUS user and the same privilege is given to the role ( role is granted to a global role to an enterprise role)
it doesnt work
Edited by: Peter on Dec 7, 2012 2:36 PM

Portal: Tab displayed but not assigned to any roles of user

HI Experts,
I have a problem need your great help.
When I logon portal as a specific user, there are 5 tab in home page. When I check the role list, 3 tabs doesn't assigned to any roles this user owned.
Then I try to copy current user into a new user, and logon in . There are only 2 tabs left, which belonged to assigned role.
How those 3 tab assigned into this user? Can we assign iView/Page/Workset directly to user without role?
Any suggestion appreciate. Thanks so much!
Edited by: Jalyn Liang on Nov 13, 2009 9:29 AM
Edited by: Jalyn Liang on Nov 13, 2009 9:30 AM

Jalyn Liang ,
You can find if the user id belong to a particular group with the following ways,
Log in as an admin and go to User Admin -> Users- > Seach -> Enter the user Id and serach for the user -> Select the 5th icon with the tool tip ->Assigned Groups"
or
User Admin -> Group -> Search for the group.
or
You can use UME API to find out whether the is belowng to a group though coding.
Ram

How to Insert a User Defined Column with CheckBox In ADF Swings

I have create JTable by dragging a view object from Data Control Palette .But apart from columns listed in JTable i need to insert a User Defined column with Check Box selection option in each row .
Can any one help me out to sort the problem.
Regards
Bhanu Prakash
Message was edited by:
user579125

I retrieve 10 column from Database and build JTable. But apart from 10 column displayed i need to display one more column( User Defined) at run time with the check box option for each row . Because on select of corresponding check box i need to do some mathematical calculation. add also How do i know whether check box is selected or not.
Regards
Bhanu Prakash

Ldapbind to database adapter users in OVD with email

Hi!
Can anyone tell me howto ldapbind to database adapter users in OVD with email or uid?
Ldapbind with full DN work just fine.
Thanks!

>
Also I can bind to users in database CRM OVD-DB table using
ldapbind -h ovd.mydomain.com -p 6501 -D "cn=extcustomername,cn=customers,cn=users,dc=mydoamin,dc=com" -w %custpwd%
But I getting "ldap_bind: Invalid credentials" error trying to bind with:
ldapbind -h ovd.mydomain.com -p 6501 -D cn=extcustomername -w %custpwd%You can bind with UPN to AD because AD is special.
You won't be able to bind with cn=extcustomername using out of the box adapter. If you write your own plugin that will look up the DN based on cn=extcustomername, then have the plugin do the bind with the DN for you, it'll work. Then you would have to make sure this plugin will work with the database adapter, I haven't tried it so I don't know.
If you're trying to make this bind with cn=extcustomername work for OAM to OVD, then you don't need to do it. Leave the adapter as is (bind with full DN). External users will login to OAM-protected application with their username or whatever is the value of cn. OAM will then look up the DN based on the cn or any other attribute, this is configured in authentication scheme in credential_mapping plugin. Take a look at the OBE example: http://www.oracle.com/technology/obe/fusion_middleware/im1014/ovd-oam/index.htm

Any Vodafone INDIA user on 5S with 2G/ 3G toggle ?

Similar Messages

Maybe you are looking for