Any wat to display artwork over network?

I thought that iTunes was not able to do this but saw a post from someone who said that this is automatic. For my setup (standard router network with all computers allowing sharing of all contents of library) when a shared song is selected the art box shows 'Album Artwork Not Modifyable' and the view options 'List with Cover' and 'Cover Browser' are greyed out. If I look at 'get info' on an individual song "lyrics" and "Artwork" are greyed out as selections.
Anyway, is there any way to display artwork for shared music? Some obscure setting I have missed? Any help appreciated.
-Bob

I sort of answered my own quetion - artwork for shared music that is actually playing is displayed by clicking on the triangle in the bar above artwork box, but arwork is not shown for music that is simply selected. This is likely due to increased bandwidth of need to transfer images over network; may well disappear as higher-bandwidth home networks become more common. I hope this helps someone.
-Bob

Similar Messages

Adding artwork over network

I get a strange thing: my library (of pretty much 160 kbps AAC) is on a network drive; currently ~10mbps link. If I import to the library on that drive: all good.
However if I then add artwork, then typically the smaller songs (2 minutes or less, although this is just a guide) become unplayable and I have to burn them again. If I import them locally, add artwork and then drag them over to the network drive later, everything's fine.
Does anyone else get this? If not are you accessing your library over a 100mbps link or something similarly faster than mine?
Cheers,
Trystan

I sort of answered my own quetion - artwork for shared music that is actually playing is displayed by clicking on the triangle in the bar above artwork box, but arwork is not shown for music that is simply selected. This is likely due to increased bandwidth of need to transfer images over network; may well disappear as higher-bandwidth home networks become more common. I hope this helps someone.
-Bob

Viewing non-embedded itunes album artwork over network

hi
i am exploring the two methods of adding album artwork to itunes, embedded and non-embedded. my preference is to go for non-embedded, as my artwork is quite large (500Kb), as is my collection (20000 tracks). i would like to be able to view album artwork on my ipod as well as over my local network. at the moment i can't see any album artwork over the network if i use the non-embedded method - is there any way of getting this working? i can see the artwork if it is embedded, though of course coverflow doesn't work over the network at present (shame). i can only see the artwork in every track if it is embedded in every track though, which means a lot more capacity is needed on my local drive for increased file sizes (500kb * 20000) = 10GB. this isn't such a big deal on the local drive, but 10GB extra on the ipod is of course a lot of space to use for artwork. i could settle for not having album artwork on the ipod, but if it is embedded in each track then i don't have the choice but to transfer it onto the ipod (i think i've got this right). at present i am using the 'lossless-AAC script' to convert from apple lossless to AAC for the ipod, but there doesn't seem to be any way of stripping the artwork in this process, or ideally reducing the artwork to a reasonable size for the ipod. as i understand it, when i use the non-embedded method, itunes sends a small version of the artwork to the ipod. ideally i would like a similar method for local artwork, rather than artwork downloaded from the itunes store.
i am used to using a PC, and J River Media Center as my media player, which had a much better method of handling artwork. you could store the artwork in each album folder and it would be recognised automatically by the media player, without embedding, and a smaller version would be sent to the ipod. this non-embedded artwork could be recognised over the local network, and you could even have multiple artwork which would play as a slideshow in full screen mode. i am hoping that itunes will work towards such functionality, but in the meantime would like a way of at least being able to view my artwork over my local network, ideally in fullscreen mode, using cover version visualisation, without embedding into each track if possible, but if i have to embed, without all the artwork being transfered to the ipod.
thanks
nick.

Wait, are you saying that your album art is 500k average for each image? That's a little crazy, unless you're projecting the album art on a wall or something. You might want to run the images through some jpg compression to get them down to 70k or so.
As for getting non-embedded art on seen over the network, it's not possible right now. You might want to request this feature for a future version of iTunes.

Benefits of embeded artwork over 'Get Album Artwork'?

I have a large collection of music in iTunes, much of it with embeded artwork. I've yet to upgrade to iTunes 7, and i was wondering are there any advantages with embeded artwork over 'Get Album Artwork'?
More to the point, other than disk space, does having artwork embeded have any disadvantages? Does it slow iTunes (and in particular Cover Flow) down?
Thanks

David,
There's an article over at iLounge that may shed some light on your question.
Matt

HT5554 20 days back myself ported network from vodafone in to airtel. But in my iphone5 its still showing vodafone in only. Done reset network setting, reztore but no use, can u ppl suggest any way to display carrier name correctly, ios i m using is ios7

20 days back myself ported network from vodafone in to airtel. But in my iphone5 its still showing vodafone in only. Done reset network setting, reztore but no use, can u ppl suggest any way to display carrier name correctly, ios i m using is ios7

Call your local Apple store. Not sure how the phone system works in the UK, but here in the US there is a menu system that allows you to make an appointment. Or, you can go online to www.apple.com/retail, or you can use the Apple Store app and make an appointment there after selecting the particular store.

Any way to display dorpdown menu over quick time player

hi all,
Is there Any way to display dorpdown menu over quick time
player in Dynamic HTML page like the flash parameters wmode
transparent....The menu and quick time is different Td's
Thanks

Not that I know of.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"jibysk" <[email protected]> wrote in
message
news:ff9rjk$i6l$[email protected]..
> hi all,
>
> Is there Any way to display dorpdown menu over quick
time player in
> Dynamic HTML page like the flash parameters wmode
transparent....The menu
> and quick time is different Td's
>
> Thanks

My iMac will not display my wireless networks, any suggestions?

I have 3 wireless netowrks in my house. My iMac will only display the one that is for my home automation system and it is not connected to the internet. Any suggestions on this? When I click the wireless icon at the top it only shows 1 network, it won't display my other network or my neighbours networks. When I try to add one of the other networks in my house, it will not find them.

Wireless Diagnostics - About
Also try turning off Bluetooth

Any way to display a message when Flash is not found on the iPad?

Apple is obviously rejecting Flash to protect it's 'App' revenue. I've been on Android phones that run Flash and display all my content perfectly smooth. It can be quite frustrating how they are trying to bury it when I still have yet to see HTML5 replicate the type of interactive content Flash is capable of producing.
Is there any way to display a message on the iPad when the Flash player is not found?
I'd like it to says something along the lines of:
"Unfortunately the Apple iPad does not support the Flash player because their business interests do not want it taking away from their App revenue.
Did you know that the Dell Streak, HTC Flyer, Blackberry Playbook, Motorola Xoom, Samsung Galaxy Tab, Toshiba Thrive, and HP Touchpad all support the Flash player?"
My HTML code looks something like this...
<html>
<head>
<title>My Page</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</head>
<body bgcolor="#ECECEC" leftmargin="0" topmargin="0" marginwidth="0" marginheight="0">
<body onresize="setFlashSize()">
<div id="flashid" style="width:100%; height:100%;">
<script type="text/javascript" language="JavaScript">
function setFlashSize(){
var viewportheight = document.body.clientHeight;
var viewportwidth = document.body.clientWidth;
var mydiv = document.getElementById("flashid");
var styleheight = parseInt(mydiv.style.height);
var stylewidth = parseInt(mydiv.style.width);
if (viewportwidth<880){
document.getElementById("flashid").style.width = 880+"px"; }
else {
document.getElementById("flashid").style.width = 100+"%";}
if (viewportheight<760){
document.getElementById("flashid").style.height = 760+"px"; }
else {
document.getElementById("flashid").style.height = 100+"%";}
setFlashSize();
document.write('<object data="index1.swf" width="100%" height="100%" type="application/x-shockwave-flash">');
document.write('<param name="movie" value="index1.swf" />');
document.write('<param name="allowScriptAccess" value="always" />');
document.write('</object>');
</script>
<noscript>Javascript must be enabled to view Flash movie</noscript>
</div>
</body>
</html>

Use swfobject for Flash detection and you can provide all kinds of alternate content... simple text, images, links, .js slideshow, a mov or mp4 video just for the iPhone... ANYTHING this is regular HTML. Your imagination is the only limit.
And YES, HTML5 is a far cry from replicating Flash... so give them the best of both worlds.
http://code.google.com/p/swfobject/
Review this article which deals with Flash and SEO for more ideas:
If you think that Flash is somehow bad for SEO, it's time to dispell that MYTH!
If fact, in some circumstances I'll use Flash INSTEAD of just HTML because then I'll have better SEO than with just HTML alone.
http://www.worldbarefootcenter.com/
The link to World Barefoot Center in the above post is just one example. View the source code and you see a couple paragraphs of text along with regular HTML links.... but what displays is the Flash version of the image and Flash links.
The client provided the artwork for the page... and that's what they wanted to use a .jpg image. Well yes, that could be done in HTML but it would be virtually invisible to Google. So Instead I converted the image into a Flash .swf and used swfobject to display the Flash. swfobject allows you to create alternate content inside the <div> which also holds the Flash .swf, then when the page is loaded it detects if the browser has the Flash pluggin. If it does, it displays just the Flash content, if not, it displays the alternate content. Since almost everyone has the Flash pluggin, for most people the Flash version of the <div> will display.
The alternate content for that <div> can be any regular HTML text, images, media player, links, etc., anything that you would use if you were not using the Flash. Now the best part is that the alternate content can be "over the top" as far as optimizing for SEO, since it will not be seen by most viewers.
Here's another example of SEO with Flash.. again, the page is just a single image provided by the client:
http://www.ksowetsuits.com/
View the source code. The alt content is paragraph after paragraph of information about the site, including lists and links. If it was just the HTML, it might be kind of a boring Home page. But for SEO I can go "over the top" in promoting the site, since most viewers will never see that part... but it's all indexed by search engines. The end result is BETTER SEO using Flash than just HTML.
On another Web site, a Flash video is displayed, the alt content is the complete text narration of the video. Now how many people would take the time to read that if they could just watch the video instead?? again, better SEO with Flash than without. In fact in one case we had first page search result from that video narration within 4 hours of posting the page.
On still another site with a Flash video, the alt content is another video, but a .mov version, which will, in effect play Flash video on the iPhone (not possible you say??). Well since the iPhone does not have Flash pluggin, it simply displays the .mov version of the video, while everyione else sees the Flash version.
So anyway, if Flash is a part of your Web development, you should look into using swfobject and alternate content.
http://code.google.com/p/swfobject/
Best wishes,
Eye for Video
www.cidigitalmedia.com
Adninjastrator

BBM over network. STILL DOWN

When sending BBM over network (EE uk) all I have is a red clock. This has been doing this since Monday last week. Come on BB sort yourselves out. EE say they have raised loads of tickets re this issue. its not just ee. over other networks as well it would seem.
BB Europe say they have not got an issues at present.
Who is telling the truth?

I've been chatting off and on all week with friends in Europe, first I've heard of any anthing being down.
Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescribed for most glitches and operating system errors, and you will lose no data on the device doing this.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I'm attempting to migrate files from iMac to new MacBook air. The estimated time shown on the display is over ten hours. Is that correct? Is there a way to do it quicker?

I'm attempting to migrate files from iMac to new MacBook air. The estimated time shown on the display is over ten hours. Is that correct? Is there a way to do it quicker?

It's quite possible, since you are using an MBA without Firewire, that it could take that long.
A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
>Classic Environment, and subsequently any Mac OS 9 or earlier applications
>Screensavers written for the PowerPC
>System Preference add-ons
>All Unsanity Haxies
>Browser and other plug-ins
>Contextual Menu Items
>Applications which specifically require the PowerPC G5
>Kernel extensions
>Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking
will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Target Disk Mode.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
>MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- Migration Tips and Tricks;
>MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
>MacBook Air- Migration Tips and Tricks;
>MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
>In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
>
>In your /Home/Library/ folder:
>/Home/Library/Application Support/AddressBook (copy the whole folder)
>/Home/Library/Application Support/iCal (copy the whole folder)
>Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
>
>/Home/Library/Keychains (copy the whole folder)
>/Home/Library/Mail (copy the whole folder)
>/Home/Library/Preferences/ (copy the whole folder)
>/Home /Library/Calendars (copy the whole folder)
>/Home /Library/iTunes (copy the whole folder)
>/Home /Library/Safari (copy the whole folder)
>
>If you want cookies:
>
>/Home/Library/Cookies/Cookies.plist
>/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
>
>For Entourage users:
>
>Entourage is in /Home/Documents/Microsoft User Data
>Also in /Home/Library/Preferences/Microsoft
>
>Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
Revised 1/6/2009

Help! Saving an image to stream and recreating it on client over network

Hi,
I have an application that uses JDK 1.1.8. I am trying to capture the UI screens of this application over network to a client (another Java app running on a PC). The client uses JDK 1.3.0. As AWT image is not serializable, I got code that converts UI screens to int[] and persist to client socket as objectoutputstream.writeObject and read the data on client side using ObjectInputStream.readObject() api. Then I am converting the int[] to an Image. Then saving the image as JPEG file using JPEG encoder codec of JDK 1.3.0.
I found the image in black and white even though the UI screens are in color. I have the code below. I am sure JPEG encoder part is not doing that. I am missing something when recreating an image. Could be colormodel or the way I create an image on the client side. I am testing this code on a Win XP box with both server and client running on the same machine. In real scenario, the UI runs on an embedded system with pSOS with pretty limited flash space. I am giving below my code.
I appreciate any help or pointers.
Thanks
Puri
     public static String getImageDataHeader(Image img, String sImageName)
         final String HEADER = "{0} {1}x{2} {3}";
         String params[] = {sImageName,
                            String.valueOf(img.getWidth(null)),
                            String.valueOf(img.getHeight(null)),
                            System.getProperty("os.name")
         return MessageFormat.format(HEADER, params);
     public static int[] convertImageToIntArray(Image img)
         if (img == null)
             return null;
        int imgResult[] = null;
        try
            int nImgWidth = img.getWidth(null);
            int nImgHeight = img.getHeight(null);
            if (nImgWidth < 0 || nImgHeight < 0)
                Trace.traceError("Image is not ready");
                return null;
            Trace.traceInfo("Image size: " + nImgWidth + "x" + nImgHeight);
            imgResult = new int[nImgWidth*nImgHeight];
            PixelGrabber grabber = new PixelGrabber(img, 0, 0, nImgWidth, nImgHeight, imgResult, 0, nImgWidth);
            grabber.grabPixels();
            ColorModel model = grabber.getColorModel();
            if (null != model)
                Trace.traceInfo("Color model is " + model);
                int nRMask, nGMask, nBMask, nAMask;
                nRMask = model.getRed(0xFFFFFFFF);
                nGMask = model.getRed(0xFFFFFFFF);
                nBMask = model.getRed(0xFFFFFFFF);
                nAMask = model.getRed(0xFFFFFFFF);
                Trace.traceInfo("The Red mask: " + Integer.toHexString(nRMask) + ", Green mask: " +
                                Integer.toHexString(nGMask) + ", Blue mask: " +
                                Integer.toHexString(nBMask) + ", Alpha mask: " +
                                Integer.toHexString(nAMask));
            if ((grabber.getStatus() & ImageObserver.ABORT) != 0)
                Trace.traceError("Unable to grab pixels from the image");
                imgResult = null;
        catch(Throwable error)
            error.printStackTrace();
        return imgResult;
     public static Image convertIntArrayToImage(Component comp, int imgData[], int nWidth, int nHeight)
         if (imgData == null || imgData.length <= 0 || nWidth <= 0 || nHeight <= 0)
             return null;
        //ColorModel cm = new DirectColorModel(32, 0xFF0000, 0xFF00, 0xFF, 0xFF000000);
        ColorModel cm = ColorModel.getRGBdefault();
        MemoryImageSource imgSource = new MemoryImageSource(nWidth, nHeight, cm, imgData, 0, nWidth);
        //MemoryImageSource imgSource = new MemoryImageSource(nWidth, nHeight, imgData, 0, nWidth);
        Image imgDummy = Toolkit.getDefaultToolkit().createImage(imgSource);
        Image imgResult = comp.createImage(nWidth, nHeight);
        Graphics gc = imgResult.getGraphics();
        if (null != gc)
            gc.drawImage(imgDummy, 0, 0, nWidth, nHeight, null);
            gc.dispose();
            gc = null;
         return imgResult;
     public static boolean saveImageToStream(OutputStream out, Image img, String sImageName)
         boolean bResult = true;
         try
             ObjectOutputStream objOut = new ObjectOutputStream(out);
            int imageData[] = convertImageToIntArray(img);
            if (null != imageData)
                // Now that our image is ready, write it to server
                String sHeader = getImageDataHeader(img, sImageName);
                objOut.writeObject(sHeader);
                objOut.writeObject(imageData);
                imageData = null;
             else
                 bResult = false;
            objOut.flush();
         catch(IOException error)
             error.printStackTrace();
             bResult = false;
         return bResult;
     public static Image readImageFromStream(InputStream in, Component comp, StringBuffer sbImageName)
         Image imgResult = null;
         try
             ObjectInputStream objIn = new ObjectInputStream(in);
             Object objData;
             objData = objIn.readObject();
             String sImageName, sSource;
             int nWidth, nHeight;
             if (objData instanceof String)
                 String sData = (String) objData;
                 int nIndex = sData.indexOf(' ');
                 sImageName = sData.substring(0, nIndex);
                 sData = sData.substring(nIndex+1);
                 nIndex = sData.indexOf('x');
                 nWidth = Math.atoi(sData.substring(0, nIndex));
                 sData = sData.substring(nIndex+1);
                 nIndex = sData.indexOf(' ');
                 nHeight = Math.atoi(sData.substring(0, nIndex));
                 sSource = sData.substring(nIndex+1);
                 Trace.traceInfo("Name: " + sImageName + ", Width: " + nWidth + ", Height: " + nHeight + ", Source: " + sSource);
                 objData = objIn.readObject();
                 if (objData instanceof int[])
                     int imgData[] = (int[]) objData;
                     imgResult = convertIntArrayToImage(comp, imgData, nWidth, nHeight);
                     sbImageName.setLength(0);
                     sbImageName.append(sImageName);
        catch(Exception error)
            error.printStackTrace();
         return imgResult;
     }

While testing more, I found that the client side is generating color UI screens if I use JDK 1.3 JVM for running the server (i.e the side that generates the img) without changing single line of code. But if I use JDK 1.1.8 JVM for the server, the client side is generating black and white versions (aka gray toned) of UI screens. So I added code to save int array that I got from PixelGrabber to a text file with 8 ints for each line in hex format. Generated these files on server side with JVM 1.1.8 and JVM 1.3. What I found is that the 1.1.8 pixel grabber is setting R,G,B components to same value where as 1.3 version is setting them to different values thus resulting in colored UI screens. I don't know why.

Error -50 when trying to display artwork on ipod 5th gen

I had this problem recently where the artwork went all wierd and wrong album covers were showing, so I thought that I'd remove all artwork using itunes (version 7.0.2.16) update the ipod, remove ipod, reset it, reconnect it and then update again with display artwork checked. It seemed like a good idea at the time but wasn't! Now all the artwork has been removed and when I try to apply 'display artwork on ipod' I get the following error message:
"ipod can't be updated. an unknown error occurred (-50)"
In short, I am now left with no artwork and can't seem to get any of it back onto my ipod despite the fact that it is all correctly atached to the tracks id and dispays ok in itunes.
Any ideas would be gratefully received...

Does anyone have a better solution? I am having this same error, and I really don't want to re-encode anything on my originals. I've done that in the past and I was unhappy with the resulting media in an ABX test. Why does iTunes have to be so picky. One of the songs is in my top 10 favorite that I listen to all the time, and as such I KNOW the song displays no obvious corruptions. AAC is the devil.

Share Aperture photos over network

Hallo every body,
iam searching for a solution, how to share photo over network for a long time, in our company we have 40 macs(imac, mac bookpro) and 3 xserve, vtrak and 30pc. and we have round about 30000 pic they are saved in iphoto library on one of the xserve.
My Boss wants from me to find a solution to share these photos over network. the mac users must use iphoto to access these photos.
which program shall i install on the server so that the client users can access the photos from there macs through iphoto.
at the beginning i used the share library option in iphoto, until iphoto 9.1.1. By iphoto 9.1.1 on the client when i click on the shared library my searching field disappears and i cant search in the shared photos.
I thought Aperture is the solution, so i shared the aperture library over the network (with afp protocoll) but in order to access the network aperture library, first i need to install aperture on the client and then i open iphoto and from iphoto option i can choose the option access aperture library.
how can i solve it without to install aperture on the client, is there any iphoto plugin so that i can access aperture library without installing aperture
or is there somebody uses another solution???
please help
best regards
Tony

Neither iPhoto nor Aperture is the solution for this.
The idea of using iphoto on the client machines is wrong, it's just not designed for that use. Iphoto is designed for a family with a point and shoot camera, or even a phone. Aperture is a pro level photomanager. Installing Aperture on all the mchines means you will have to purchase the app for all the machine, you need a site licence.
Also, it won't work anyway. You can't share an Aperture Library like an iPhoto one an only one user can access the Library at a time. So, one of the users acesses the Library and all the others are locked out.
Neither are what you need: you need a media server application. A pro level media server. Tell your boss he's fooling himself if he thinks anything else will work reliably.
Regards
TD

Install Solaris10 over network.

I have one sinfire v245 box which is in remote location (DR site). I want to install Solari10-u5 on it.
I can't travel to remote site due to some restriction.
Presently Solaris10-U1 is installed in the box.
I have telnet/SSH access to Solaris-OS, and i have SSH access to it's "Advanced Lights Out Manager".
There is no one in remote location who can insert Solaris10-u5 media.
In this situation, is there anyway that i can freshly install Solaris10-u5 on it ?

Ok. I learned the way how to install Solaris over network.
I have created a install server on another solaris box, the client and this box are in the same network.
I am trying to install the client, i am getting this error on the client continuously . Any idea how to solve this ?
ar_entry_query: Could not find the ace for source address <IP_Address>
ar_entry_query: Could not find the ace for source address <IP_Address>

Any suggestions for building a home network (in a modest...

Any suggestions for building a home network (in a modest 1600 sq. ft. home) with the following requirements...
1) Laptop(s) and PC share broadband (cable) internet connection
2) Access files on PC from laptop(s) and vice versa
3) PC and laptop(s) share printer (Canon Pixma 610)
4) Send media on PC to TV
5) Send music to wireless speakers (not purchased yet)
Note hardware specs:
A) One laptop runs on Windows XP and has an Intel PRO wireless 2915ABG network connection
B) PC runs Windows XP Media Center
I was thinking about the wireless N broadband router 300. From the experiences of the community, will I be able to achieve my goal? Beside a PC adapter, is there any other hardware I will need?
A couple other questions.
The router will likely be sitting right next to my PC. Does the PC need to have a wireless adapter or can it be wired from the router to the PC?
When will the media extender be available? Will it work with Windows XP?
Thank you.
Chris

I personally might not buy Wireless-N, but the idea of being on the bleeding edge is nice.
Anyway, whichever router you choose, you should be able to accomplish almost everything you need.
You'll be able to share your internet amongst all of the computers, and share files between them all. Local firewalls and permission settings on individual computers could potentially pose a problem.
Sending media to your TV may or may not be possible, depending on what other hardware you have. A router itself would not be able to do that, as a TV doesn't usually have any form of WiFi, but if you had a box connected to it for displaying content on the TV, you could do something like that...
Wireless speakers are generally a separate wireless system. As far as I know, there is a wireless transmitter that sits next to the amp (or other sound source), and broadcasts the music wirelessly to the speakers. You'd have to make sure the speakers and wireless router are on different channels as to not cause interference.
Don't know much about the media extender, but highly likely will be compatible with XP.

Any wat to display artwork over network?

Similar Messages

Maybe you are looking for