Any way/application to raise the volume of an mp3

I exported the song into GarageBand which lets me raise the volume a tiny bit but these particular songs are almost half the volume of any other song.
I tried a quick search on VersionTracker.com but came up short.
I'm on 10.5 but if there's a program that doesn't work on Leopard yet I have access to 10.4 and 10.3 machines
Thanks

Hi there, here is a couple of plugins you can use in GarageBand that could be useful: the Sonalksis FreeG, and the C3 Multi Band Compressor.

Similar Messages

Is there any way to turn off the volume rocker of the side of the iPad?

Is there any way to turn off the volume rocker of the side of the iPad?
Please help!!!!!! I forever have the square with the volume control on my screen because my volume rocker does not work.

You could try a reboot: Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (ignore the red slider to shut down) until the Apple Logo appears, then let go of both buttons and your iPad should restart. If that doesn't get rid of the volume control box on your screen, it's time to make an appointment with the Genius Bar at your Apple Store, and they can send your iPad off for service.

Is there any way I can get the volume/silent button fixed on my iPhone?

Is there any way I can get the volume/silent button fixed on my iPhone?

More than likely, yes - via a 3rd party repair shop that works on iPhones.
Not by Apple. Apple does not offer a menu of repair services except for replacing the battery when the iPhone is no longer under warranty. If under warranty, the iPhone would be exchanged under warranty for such a problem. Apple also offers an out of warranty or not covered under the warranty "repair" price, which pays for an exchange at a discounted price off the full retail sales price - a like for like exchange. Same model/color/storage capacity.

The volume up button of my iphone 5 is not working and i can barelly listen my conversations, is there any other way that let me raise the volume?

The volume up button of my iphone 5 is not working and i can barelly listen my conversations, is there any other way that let me raise the volume?

Yes go to settings, general, accessability and turn on assisive touch. A little square will appear, click it click more
(the arrow) and select volume up. For more information tell me.

I recently downloaded a program ScanFont 5, When I try to open the installer I get the following message: "You can't open the application "(null)" because it may be damaged or incomplete. Is there any way I can get the installer to open anyway?

I recently downloaded a program ScanFont 5, When I try to open the installer I get the following message: "You can't open the application "(null)" because it may be damaged or incomplete. Is there any way I can get the installer to open anyway?

The message means just what it says. Remove the damaged copy and try downloading it again.
Edit: Looking at FontLab's page, there's two issues going on.
1) It's a PowerPC app and will not run on any version of OS X newer than Snow Leopard, 10.6.x.
2) The "workaround" they offer is to purchase the Windows version and then run it in the the open source Wine, Windows emulator.

Any way to avoid adjusting the ring volume?

Any way to avoid adjusting the ring volume? Don't know how but after using the phone for a day or two, the ring volume is adjusted. Is it because I adjust the volume of iPod or other apps. Is there a way to fix the ring volume at a constant level and won't be changed until actually changing the ring volume setting itself?
Anyone?
Thanks
Gaston

The ring volume is seperate from the iPod or 3rd party apps volume. You can have these at seperate levels. As a test, I made sure the ringer volume is at 100%. I started playing a song and lowered the iPod volume to 50%. I stopped the song and checked the ringer volume which remained at 100%.
There is no lock setting for this. If you adjust the volume when not using the iPod or when not playing a 3rd party app, it will adjust the ringer volume.

Is there any way to hook into the SQL report pagination process?

I have a SQL report (based on EMP) with a radiogroup row selector.
The scenario 1 and 2 are in place
1) When the employee row radio group is clicked the P900007_JOB the text item is populated with the JOB for the employee.
2) When the page is initially displayed or submitted via the button the first row’s radio group is programmatically clicked and therefore populates the additional job information in P900007_JOB
Info (radio Group) Employee No Name
(+) 7369 SMITH
() 7499 ALLEN
() 7521 WARD
P900007_JOB CLERK
1-3 Next>
Once the report has been displayed and the next or previous pagination is used then none of the radio groups will be selected and the data in the P900007_JOB text item will still display the job of the last selected employee row.
What I require is on pagination some sort of mechanism to either
a) Call the page_init() that should then set the first row as selected and populate the text item via the programmatic click. (preferred option)
b) OR blank out the additional text item P900007_JOB.
Is there any way to hook into the pagination process?
I have a work around – Set the ‘Enable Partial Page Refresh’ to ‘No’ but this means a full refresh every time the pagination is used.
Details of my page
Report Region (Based on EMP table) – radio group as a row selector
select     APEX_ITEM.RADIOGROUP(1,EMPNO,'X21',null) CHECKRG, EMPNO,
     ENAME,
     JOB
from     EMP
Report Attributes -
Report template :- P900007_ROWTEMPLATE (custom template see later)
Report Attributes Substitution :- id="emp_report" (used in page_init see later)
Enable Partial Page Refresh :- Yes
Columns – All columns are selected as show but job is left out of the template below.
P900007_JOB - Text item in report region (disabled does not save state). Populated with the employees job when the radio group is clicked.
Control region :- HTML region that just holds a button <GO> just to submit the page and redirect back to the same page.
P900007_ROWTEMPLATE (named column row template)
Row template 1
<tr style="cursor: hand; cursor: pointer;" onmouseover="row_mouse_over(this, 1)" onmouseout="row_mouse_out(this, 1)" #HIGHLIGHT_ROW# ">
<td class="t15data" onclick="selectRow('#JOB#');">#CHECKRG# </td>
<td class="t15data">#EMPNO# </td>
<td class="t15data">#ENAME# </td>
</tr>
Before rows
<table class="t15standard" summary="" #REPORT_ATTRIBUTES# id="report_#REGION_STATIC_ID#" >
<th class="t15header" #ALIGNMENT# >Info</th>
<th class="t15header" #ALIGNMENT# >Employee Number</th>
<th class="t15header" #ALIGNMENT# >Name</th>
After Rows
<tr>
<td colspan="99" class="t15afterrows">
<span class="left">#EXTERNAL_LINK##CSV_LINK#</span>
<table style="float:right;text-align:right;" summary="pagination">
#PAGINATION#</table>
</td>
</tr>
</table>
*Javascript in page Header*
<script src="#WORKSPACE_IMAGES#apex_show_hide_region.js" type="text/javascript"></script>
<script language="JavaScript" type="text/javascript">

</script>
*Application shared component.* – This fires a DB packaged procedure when the page is loaded.
P330_PART_NO_HIST
Process Point On load after Body region
Process Text show_hide_memory.part_no_history_details();
*Packaged Procedure* – This kicks off the page_init javascript in the header (earlier) to click on the radio group in the first row.
PROCEDURE part_no_history_details AS
BEGIN
htp.prn('<script type="text/javascript">' || CHR(10));
htp.prn('' || CHR(10));
htp.prn('</script>' || CHR(10));
END part_no_history_details;
Thanks Pete
Edited by: Pete @ LSC on 26-Jan-2010 06:56

Anybody any ideas? Should I be looking down the route of using my own pagination buttons and adding my code to this?
There seems to be a routine $a_report that I can use for the pagination but I am finding it difficult to get the current first and last record values that I would need to pass. I've seen references to below in the form but when I'm using partial refresh they do not seem to change.
wwv_flow.g_flow_current_min_row
wwv_flow.g_flow_current_max_rows
wwv_flow.g_flow_current_rows_fetched
wwv_flow.g_request
Thanks Pete

How can I raise the volume on a video clip in Premiere Elements 12?

I want to raise the volume on a video clip in Premiere Elements 12. Can anyone help?

jcomput
Always good to give the computer operating system involved in case any computer specific details needed to be included. But here is your
generalized yet specific answer for Premiere Elements 12 and increasing the volume of a video clip.
If you are in the Expert workspace...
a. click and drag upward the orange band that runs horizontally through the middle of the audio clip.
or
b. go to Adjust Tab/Adjustments Palette/ Volume Panel expanded on move the volume slide toward +6 dB.
0 db does not represent no sound. It represents the volume of the sound when it was recorded. 0 to +6 dB increases the sound above the recording level; 0 to infinity symbol decreases the sound below the recording level, finally to muted sound.
Please let us know if you are OK with the details above. My blog post on PE12: Audio Features may be useful to you.
ATR Premiere Elements Troubleshooting: PE12: Audio Features
Thank you.
ATR

Non-Apple Keyboard: any way to control system audio volume?

I have a non-Apple Keyboard on my new Mini Lion 7.2.1
Is there any way to control system audio volume via the keyboard ?

Well. I can do this. But just because, on my Apple keyboard, there are the keys that do the job. There's a key to mute, and the keys to adjust low and high the sound. But keyboard shortcuts, I don't think exist. The aren't in keyboard shortcut in Keyboard panel, within System Preferences. The bottom line is that isn't a menu item in Finder for lower sound and higher sound. The only option would be an AppleScript that you save as an applet within Scripts menu (activated in Finder via Script Editor) and you invoke with a shortcut... Well, you can do it, if you open the script Set Output Volume in UI Elements Script folder within Scripts folder. Try it out!

I have a preorder and I can't find the credit card I used to buy it in the first place. Is there any way I can switch the payment to a new card and get my cd?

I preordered a CD and I can't find the credit card I used to order it so I can't confirm the billing and recieve my CD Is there any way I can switch the payment to a new card and get my cd?

Welcome to Apple Communities
PowerPC applications are unsupported in newer versions. You can upgrade Photoshop or you can install Snow Leopard in a partition.
1. Open Disk Utility (Applications > Utilities) and select your drive
2. Go to Partitions tab, press + button, create a new partition and press Apply
3. Insert the Snow Leopard install DVD and reboot pressing C key
4. Install it in the new partition
5. If you want to change boot, go to System Preferences > Startup Disk and select 10.7

Any way to know if the "Remember" option of the Security panel is active or inactive?

Hello, is there any way to know if the "Remember" checkbox of the Security panel is active or inactive? I just need this for a "local" domain application that access to the camera and the microphone. The camera.muted property es not enough because I need a permanent access, and if the "Allow" option is active but the "Remember" option is not active, I have no way to know if I have full access to the camera and microphone.
Regards.

Hi,
IMHO testing for an instance of Applet will not solve the problem because it seems that godbert has an (J)Applet including a main method which can be started as application and as applet.
One solution for solving the problem could be to store at startup if the program was started as applet or application. Storing this in the system properties makes it available for other components, too.
class MyApplet extends JApplet {
static {
    System.setProperty( "startedAsApplet", Boolean.TRUE.toString() );
private boolean isStartedAsApplet() {
    return ( Boolean.getBoolean( "startedAsApplet" ) );
private void setStartedAsApplet( boolean startedAsApplet ) {
    System.setProperty( "startedAsApplet", new Boolean( startedAsApplet ).toString() );
public void startLikeApplet() {
    setStartedAsApplet( false );
    init();
    start();
    stop();
public static void main( String[] args ) {
    MyApplet myA = new MyApplet();
    myA.startLikeApplet();
}Hope that helps,
Alex

I recorded a video when my phone was on silent mode. There is no sound on the video. Is there any way I can get the sound on the video?? Please help!

I recorded a video when my phone was on silent mode. There is no sound on the video when I play it. Is there any way I can get the sound on the video?? Please help!

I have tried turning up the volume and it still doesnt work, I think I have tried everything possible and still no good!

I want to buy a new apple tv but it used hdmi cables and my house is only wired for analog. Is there any way I can use the apple tv on analog cables?

I want to buy a new apple tv but it used hdmi cables and my house is only wired for analog. Is there any way I can use the apple tv on analog cables?

Welcome to the Apple Community.
It's do-able, but I don't think it's a great idea.
DVI
Some users with DVI have managed to get their TV's to work with DVI-HDMI cables. DVI carries no audio, so alternative connections need to be explored to enable audio. DVI doesn't necessarily support HDCP as well as other standards used by HDMI (which may or may not be an issue)
Analogue
There are hardware converters that will convert HDMI to various other types of output, however there are some issues with doing so that you should be aware of.
HDCP
HDCP compliant converters will not allow you to watch HDCP protected content such as that from the iTunes Store. Non compliant converters exist but we cannot discuss them under the Terms of Use for these communities.
Resolution and aspect ratio
I'm not aware of any converters that will scale the output from the Apple TV, any TV or projector which is used will need to be widescreen and support resolutions of 720p (Apple TV 2), 720p/1080p (Apple TV 3)
DAC
DAC (Example Only - Not a recommendation or suggestion that this is suitable in your circumstances)

HT201335 I have an i mac early 2008 10. 8. 2 mountain lion. Is there any way i can do the mirroring to my apple tv.

I have an i mac early 2008 10. 8. 2 mountain lion. Is there any way i can do the mirroring to my apple tv/ tv?

Not natively. That requires the newer processor. You will have to use Airparrot
http://airparrot.com/

My iphone was stolen, I used find my iphone app, and found that it was offline, however when tried locking mode option, I pressed remove device by mistake. Is there any way I can restore the iphone to my icloud/ apple Id again? No manual backup on laptop

My iphone was stolen, I used find my iphone app, and found that it was offline, however when tried locking mode option, I pressed remove device by mistake. Is there any way I can restore the iphone to my icloud/ apple Id again? No manual backup on laptop

The phone will automatically re-appear when it connects to the Internet. However, don't get your hopes up, as thieves know this & will make sure your phone never re-connects so you can locate it.

Any way/application to raise the volume of an mp3

Similar Messages

Maybe you are looking for