Any Way I Can Make My Page's Images Load One At a Time?

Hi folks,
I have a page with a stack of large images. It takes several seconds for them all to load, but I was wondering if there's any way I could dictate the order in which all of these images load? This way, the top image would load first, then the the next one down, and so on, leaving little perceivable page load time for visitors.
It seems like this would be a common necessity for a web page, does anyone know an easy (because I know very little about this) way to do this?
Thanks!

One major problem, is that you have scaled the images in DW, and not in a graphics program.   I have your page open in the background and it's been a while loading and it's still not finished  :-)
eg:  the following images has properties of:
http://www.selfeffacingtheories.com/web-content/pictures/picpics/holes.jpg
933px × 699px  but you have scaled it to:  615px × 458px
Trying to put your page through the Web Optimiser - doesn't show a very good result - it couldn't be tested because it exceed the size requirement.
http://www.websiteoptimization.com/services/analyze/
The size of this web page (4264698 bytes) has exceeded the maximum size of 3000000 bytes.
This is just way too big a file size and seriously needs to be optimised.  The only way to do this is to scale down the images in either Photoshop or Fireworks.
Why not use a lightbox effect, where you show a much smaller size of the image and then when someone clicks on it they see a much larger version of the image:
My small demo here: (using the Dreamweaver Lightbox Extension)
http://dreamweaverresources.com/tutorials/dreamweaver-lightbox/

Similar Messages

  • My Old macbook pro that i bought in 2009. I have broke my screen and havent used it for a while, and now i have found out that i can use a monitor , but i have forgot my password is there any way i can make a new password? Thank you for reading this.

    My Old macbook pro that i bought in 2009. I have broke my screen and havent used it for a while, and now i have found out that i can use a monitor , but i have forgot my password is there any way i can make a new password? Thank you for reading this.

    Have you read for possible solutions over in the "More Like This" thread over here?-----------------------> 
     

  • IS there any way i can make something appear on the external screen or use the camera or microphone?

    IS there any way i can make something appear on the external
    screen or use the camera or microphone?

    Hi. Sorry, but isn´t this something that has been around forever?
    Regards
    Lars @ søgemaskineoptimering

  • Is there any way i can make a face time without wifi?, is there any way i can make a face time without wifi?

    is there any way i can make a face time call without using wifi?

    Unfortunately, no. FaceTime is only available over wi-fi. I do know that services like Skype and Tango allow you to videochat over 3G and wi-fi.

  • Is theres any way i can make yahoo calls from my account to another , like pc to pc

    is theres any way i can make yahoo calls from my account to another , like pc to pc 

    by the way. if it means anything. i am using the Australian iTunes store.

  • My IPOD 7th Generation is not compatible with my cars audio system. I had the IPOD nano 4th generation earlier and it was perfectly working on my car audio system. Is there any way i can make the IPOD Nano 7th generation compatible with my car audio syste

    My IPOD 7th Generation is not compatible with my cars audio system. I had the IPOD nano 4th generation earlier and it was perfectly working on my car audio system. Is there any way i can make the IPOD Nano 7th generation compatible with my car audio system?

    I am assuming you are using the Lightning to 30 pint adapter and it is not working?

  • HT4783 I have an early 2010 and a late 2011 MacBook Pro, they both have the latest upgrade of Lion. Neither of them can "see" each other in AirDrop. I have reset the apple ID on both. Is there any way I can make them "see" each other?

    I have a mid 2009 and a late 2011 MacBook Pro, they both have the latest upgrade of Lion. Neither of them can "see" each other in AirDrop. I have reset the apple ID on both. Is there any way I can make them "see" each other?
    As far as I know the older mac is compatible with AirDrop.
    Thanks

    So by dual-signal, are you referring to 2.5Ghz/5Ghz signal?
    I'm pretty sure my Mac mini 2011 has that but for whatever reason I cannot send via AirDrop to the mini. The mini can see other computers like my 2010 MacBook Pro and send files to it, but not in reverse. The MBP is unable to see or send to the mini unless the mini has engaged it to send a file to MBP. Even then it's temporary and the mini will disappear from the MBP's AirDrop radar upon completing the delivery of its file.
    So I'm a bit perplexed on how the Mac mini has AirDrop, can see other AirDrop computers and send files to them, but cannot be seen on other Macs to reciprocate.

  • Is there any way I can view internet pages that can be viewed only with explorer browser?

    Hello, there is one site that I visit extremely often for work, but it works only with explorer browser. Is there any way I can open it using y iPad?

    ED3K wrote:
    If its only for explorer browsers, the company who owns that website doesn't know how to make a website. most of the sites out there now are using HTML5 which is cross-compatible on all browsers.
    The reason it needs internet explorer is because it will probably need to use some sort of active x plugin.
    I disagree that "the company who owns that website doesn't know how to make a website." You do not know the requirements; technical, contractual, or environmental that led to the design of the web site. There may be a valid reason the site is designed to use IE only. For example, many multimillion dollar government web sites are IE only because of policy, security, or other restrictions.

  • HT5622 when i send an iMessage, it comes up as my email. is there any way I can make it come up as my name?

    when i send an iMessage, it comes up as my email address. is there any way i can get it to come up as my name?

    Make sure the receipient(s) have you in their Contact app with that email address and your name.

  • Any way I can make my iPod Nano quieter?

    The loudest I ever listen to my music at is at around 1/3 of the bar and that's when I'm somewhere noisy. When I've got it on at work I have it on the lowest volume setting, but it's slightly noiser there than I'd like it to be really...
    Glyn

    "I believe he is looking to shift the range of the volume scale down - not simply turn down the volume."
    That’s correct. I am familiar with the operation of the click wheel volume control.
    “To get to debug menu just hold down both centre and menu until the Nano resets then while its resetting press and hold centre and left.”
    Tried this and got to an ‘iPod Diagnostics’ menu, though I can’t seem to see an Audio option there.
    “have reinstalled the firmware right? I've never seen a post asking to lower the volume before, and it's hard to believe that the lowest setting is too loud for you....the lowest setting is practically off for a normal iPod”
    I think I’m just using the original firmware that came pre-installed. While I normally like listening to music at decently loud volumes I've found I seem to get earache / ringing in my ears if I listen to earphones at anything but fairly quiet volumes. Don’t want to damage my hearing so that’s what I’ve got used to. Plus I’ve been allowed to have them on at work, so long as it doesn’t interfere with my work and it’s actually useful for me to be able to overhear background noise and conversation over the music.
    Alternatively, is there any way I can alter the volume of the AAC files using iTunes or whatever so that they’re quieter before they get put on to the iPod?
    Glyn

  • IPod touch got stolen didn have findmyipod touch turned on is there any way I can make sure they don get in my emails

    Someone stole my iPod touch and I'm afraid they will get in my email from my iPod touch is there any way I can find my iPod touch or erase my info from it from my laptop I have my serial number

    These are your only options.
    http://support.apple.com/kb/HT2526?viewlocale=en_US
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • HT2497 Airport is not recognizing my wireless network because my wireless network has the same name as another apartment in my builing.  I cannot change the name because my room mate controls it, is there any way I can make it find my wireless network?

    It used to be that the other apartment with the same name didn't have theirs password protected so even though only one or the other would show up, I could always get onto one.  Now, they have password protected theirs and it seems to be that 100% of the time only theirs shows up which I only can tell because it says "invalid password" when I try to connect to the Internet.
    I have asked my room mate to just change the name of the network but she is really slow to do anything about it and I need to be able to get the internet at home and the internet is in her and set up through her computer so I really don't have any way of being the one to just go in and fix it myself.
    Is there any other way to make Airport recognize that there are two different networks with the same way so it will find mine?  I feel like I have tried everything including mannually typing in the name of my network and typing my password and it still just says "invalid password."  I have also double checked that I was typing in the correct password and I am.  My room mate is not having any problems accessing the Internet so I know the problem is not with our connection (she also has a Mac, almost the same model as me, I have a MacBook Pro purchased in 2011).  I am also able to connect to the Internet on my Mac at coffee shops and the library so I know that the problem is not my computer or my wireless connection so I'm pretty sure it is just that Airport is somehow only recognizing one of the two "WLAN" networks
    Any help???!

    Hi - you can do what you want to do with AirPlay from your iPhone - but unfortunately it is not as easy as the people in the Apple store told you - your first problem is that you have a non Apple router - you cannot extend a non Apple router wirelessly with the Express - you can only join the network and connect an ethernet device to it - you can however connect via ethernet and have it create a wireless network of its' own - you can set this up from your iPhone or the XP - but this is a complicated setup and would involve many different discussion areas of this forum - therefore I would suggest that you use your 90 days of support and consult directly with Apple to do this - go to this link - http://www.apple.com/support/contact/

  • Is there any way i can make ase to put something in errorlog when the one of the db is dropped

    Hello
    a silly query
    I had dropped the db and closed the putty can it be possible anyway to prove someone that i had dropped the database.
    Thanks

    I don't know of any way to have ASE automatically log that to the errorlog.
    If this is a general ongoing requirement, I'd recommend using the auditing features.
    To show it historically, the transaction log in the master database can provide proof (assuming you weren't using a shared login).   When you drop a database, ASE logs a BEGINXACT log record that has a transaction name of $dbdestroy <databasename>.  The record also contains the suid of the user and a datetimestamp.
    dbcc log(dbid,0,0,0,number of records to print,0)
    The final 0 is the filter for BEGINXACT record types, which has an op code of 0.
    Example
    1> create database x
    2> go
    CREATE DATABASE: allocating 1536 logical pages (24.0 megabytes) on disk 'master'
    (1536 logical pages requested).
    Database 'x' is now online.
    1> drop database x
    2> go
    1> set switch on 3604
    2> go
    Switch 3604 ('print_output_to_client') is turned on.
    All supplied switches are successfully turned on.
    1> dbcc log(1,0,0,0,1000,0)
    2> go
    LOG SCAN DEFINITION:
            Database id : 1
            Log operation type BEGINXACT (0)
            Forward scan: starting at beginning of log for 1000 log records
            Maximum of 1000 log records.
    LOG RECORDS: (0 records did not qualify so far.)
            BEGINXACT       (4054,1)        sessionid=4054,1
            attcnt=1 rno=1 op=0 padlen=6 len=72
            odc_stat=0x0000 (0x0000)
            loh_status: 0x0 (0x00000000)
            masterxsid=(invalid sessionid)
            xstat=XBEG_ENDXACT,
            spid=17 suid=1 uid=1 masterdbid=0 dtmcord=0
            name=$dmpxact   time=Mar  5 2015  9:26:25:270AM
            BEGINXACT       (4054,11)       sessionid=4054,11
            attcnt=1 rno=11 op=0 padlen=5 len=64
            odc_stat=0x0000 (0x0000)
            loh_status: 0x0 (0x00000000)
            masterxsid=(invalid sessionid)
            xstat=XBEG_ENDXACT,
            spid=17 suid=1 uid=1 masterdbid=0 dtmcord=0
            name=x   time=Mar  5 2015  9:26:53:280AM
            BEGINXACT       (4054,19)       sessionid=4054,19
            attcnt=1 rno=19 op=0 padlen=2 len=72
            odc_stat=0x0000 (0x0000)
            loh_status: 0x0 (0x00000000)
            masterxsid=(invalid sessionid)
            xstat=XBEG_ENDXACT,
            spid=17 suid=1 uid=1 masterdbid=0 dtmcord=0
            name=$dbdestroy x   time=Mar  5 2015  9:26:57:280AM
    Total number of log records 3 qualified out of 3 scanned.
    DBCC execution completed. If DBCC printed error messages, contact a user with
    System Administrator (SA) role.
    So the third BEGINXACT record output here shows that suid 1 ("sa", that is me), destroyed (dropped) database named  "x" at 9:26AM
    Cheers,
    -bret

  • Is there any way I can convert web pages to PDF using Acrobat X Pro in Explorer from Office 2013?

    I get the error message "Could not access Acrobat's web capture facility.  Acrobat may be busy or waiting for input."  I have Win 8 OS also. Is there any way to convert?

    I doubt that PDF Maker of AA X will work in OFFICE 2013. You should be able to print to the Adobe PDF printer, though I am not sure how AA X works in Win8, another potential problem.
    For a web site, you should be able to open the web site directly in AA X.

  • Simple motion animation - any way I can make this look better ?

    Hello All;
    I would like your thoughts and tips. I created a simple animation in AE CS3 that I am going to use in a video. I would like to know if there is anything you'd suggest I do to make it look better ? Would you suggest adding a horizontal blur during the motion portion and if so, what type of Blur in AE CS3 ? Thanks for any tips you can provide.
    Tim

    Commenting on just the motion, not the design I'd enable motion blur and maybe increase the shutter angle from the default of 180º to about 360º. I'd also put in an ease in and ease out. You could just select all the keyframes and press F9.
    On the design, I'd try a gradient for the background and work a little on the typography so that it's a little more readable.

Maybe you are looking for