Any way to add multiple regions to a dialplan

I want a single dial plan for my pool (which is centralied) but want to
have multiple Dialin Conferencing régions. Any way to have 1 dial plan associated with multiple dialin conf régions ?

Thx for the quick answer Kevin.
However i don't want to assigned multiple regions to a dialin access number, i'd like to assign multiple regions to a dialplan.
I want multiple regions with different numbers but do not want multiple dial plans.
Question is: 1 dialplan = 1 dialin region only ??
I think that my only option is to have a "north America" dialin region and assign my differant npa access numbers.

Similar Messages

Is there any way to add multiple Facebook activity feeds to one BC website?

Hi,
One of my clients owns several cafes and they all share the same BC website abnd have their own pages. He now wants to add facebook activity feeds for each cafe.
I can go through the regular steps to add 1 feed to the site, but how can I add additional feeds? It there code I can paste into each cafe page instead?
Any ideas would be appreciated.

I use an a third part JS code to pull in Facebook content.
One script (it is a premium script) my client loves is called Social Stream. He loves the social wall and I have several other clients who appreciate this functionality. Could be an interesting way to display the various cafe's FB activity.

Any way to add transitions to multiple slides??

I just completed a 200 slide presentation which I imported into the iPad. At the time, I was not worried about slide transitions. I thought that once on the iPad, I could like on the mac, select a group of slides and add the same transition to all at once. I just tried on the iPad and it only added to one slide at a time!! Ugh!!
I had to make numerous changes to the slides once they hit the ipad for formatting, fonts, and so on so it's not practical to tweak on the mac then send back to the iPad.
Is there any way to add a transition to multiple slides at once on the iPad?
Thanks

Thanks, David, for your reply; the slides are all just basic dissolve transitions. nothing fancier, and dissolve is supported in both the transition and the build areas of keynote for ipad according to the help doc, which I had read, so this is why I am confused. I did originally create the document in keynote '08, but opened and saved it in '09, and then selected the slides, set dissolve as transition, and saved as a test file. It's an '09 file now, and some slides dissolve, others don't although they were all selected to dissolve. I've used Keynote for years on my mac so I know I set up the dissolve correctly. just not sure why only some of them are working and others not in the ipad file. I'm going to create one from 'scratch' using Keynote '09 and see if that makes a difference.

Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address? This necessitates constantly going back to click the + sign to add each address separately.

Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address? This necessitates constantly going back to click the + sign to add each address separately. Is there some way I can open the contact list, click on all of the individual addresses to which I want to send the email without the list closing between each address entry, and have all of my address entries be listed to the email at one time? Something like it works in Gmail. I do not want to use set lists, I want to enter different addresses each time I send an email. And I am a very slow typist, so I don't want to type the first few letters of each recipient's name. It is much faster for me to just click on the e-mail addresses in the list as a group. It doesn't make any sense to me to have to reopen the contact list for each address, when it should be so easy to click on all of the addresses I want at one time and then click once to add them all to the email as a group. If there is a solution to this, please tell me. Thanks.

Vatlily,
Try this:
1. Select Mail>File>New Message.
2. Select Mail>Window>Address Panel.
3. Use (command+click) on the desired addressees in the Address Panel to create the list.
4. Click "To:" on the top left of the Address Panel.
The group that you selected will be added to the "To" field in your New Message.

Is there a way to add multiple borders to a single cell with one click or do I have to add one border at a time for example, one cell with borders on three sides?

I would like to know if there is a way to add multiple borders to a single cell or selection of cells in one click. At this time, if i want to add for example a top border and a bottom border to a single cell I have to do this in two steps: first select the top border, style, thickness, and color, and then next select the bottom border, style, thickness, and color. Is there a way to select the top and bottom border of a cell in one click? Clicking on the top border then holding down the command key while selecting the bottom border does not work, nor does holding down the option key, the control key, or the shift key work. Thanks for your help.

Thank you for the suggestion but this did not work for my Mac. When a cell is selected for which I want borders, the entire cell is lit up. Then when I go to the border tool and select style, thickness, and color, the entire lit up cell takes on the border, that is the Outside Edges of the cell now have a border. So selecting the style, thickness, and color first doesn't work.
If I select the top border first (or any border), the drop down goes away and I can't select multiple borders - I get to choose one at a time. After selecting one border, style, thickness, and color, said border is now on the spreadsheet. Then I go back to the border selection and pick another border and the the previously selected style, thickness, and color reverts to null, so I start over with the new border style, thickness, and color. Yes, it is tedious.
The Fix would allow the user to select multiple borders, say left and right, before the drop down goes away after selecting only one border
Does it have something to do with Allow or Disallow border selection?
I have Numbers '09 version 2.1 (436)

Any Way to Add the Date to Pictures in PSE 4.0??

I've just started using PSE 4.0, and am new to the forum.
I don't see any way to add the date to a picture. I want to be able to add the date to the picture file for sending to a commercial source for printing. In my search in this and other forums, it appears there was a feature to add the date via Print|Show more options|Label|Date in PSE 3.0, but the "Date" seems to have been eliminated in 4.0.
I've used a separate program (Exifer) for this in the past, but doing it one picture at a time is tedious at best, and very time consuming. With all the capabilities of PSE, I'm amazed that this isn't an obvious capability.
Any advice would be greatly appreciated.
Tks...Thksnow

Barb -
You are absolutely right. Unfortunately the Date function under Caption put an entire date and time stamp on the picture, which is not what I want. All I'm trying to do is put a date stamp on the picture similar to a dateback on a 35mm camera (yes I still have a few of those!!), which we really like to have for our family photo albums.
The best I've figured out from a suggestion on another forum is to use the Watermark function under the same Process Multiple Files area. The downside is that I have to put the date in manually, as opposed to automatically from the file data, but it's better than doing it with another program.
Bryan

Any way to upload multiple images without renaming?

The multiple image upload seems to enforce a renaming convention and the
creation of restricted user backup folders or new folders.
Is there a way to just upload multiple files to an existing folder and just
allow renaming or replacing of images, but still resizing? This procedure
seems to work fine on individual image uploads in an update or insert record
behavior....
Maybe I'm missing something, but I was getting all sorts of directories
being created and couldn't load the new files with their current name into
the directory I actually wanted...
Jeff

Post Author: norton
CA Forum: crystalreports.com
Hi Dixie,
You seem to be asking all the right questions lately!
Right now we do not have any way of uploading multiple docs at once. We do have the desktop publisher tool that helps with automatically refreshing a report and uploading it, but it is still handles them on an individual basis.
However, with our next big release (planned for the middle of December) we are planning to add a new batch task to the desktop publisher. The intent behind this is that you can set up your folder and document structure on your local file system and use the batch task to upload everything to your cr.com account. This would include creating the necessary folders in cr.com. You will be able to schedule this batch task like you do the existing individual tasks so that it runs once a week or whatever you like.
This new batch task will NOT allow you to refresh any reports before uploading them though. Everything will be uploaded as is.
Hopefully this will help with what you are trying to do.
Steve

Any way to pass Multiple Values for a single Label in the Parameter?

I have a Report that Contains 2 Parameters, @Customer & @Area. When trying to set up the Available Values for @Area, I'm having issues using multiple values for one Label, i.e. = "4006" Or "4610"
One of the Filters in the Report is an Operation number, which is the [OPERATION] field, which is setup as a filter on the Tablix referencing the @Area parameter.
PROBLEM: I cannot retrieve any data when trying to use the ‘Or’ Operator here. If I simply put “4006” or “4610” I retrieve data, but when trying to combine it returns no data.
Example, I need to allow a user to select ‘Chassis Incoming’, which would include data from Operations 4006 & 4610.
QUESTION:
Any way to pass Multiple Values for a single Label in the Parameter?
I realize the typical solution may be to use ‘Multi-Value’ selection, but in this case we want the User to select the Area and the multiple values for Filtering will be automatically determined for them. Otherwise, they are subject to not getting
it correct.
I have tried several different ways, such as =”4006” Or “4610”, =(“4006”, “4610”), = In(“4006”, “4610”), etc….
Note: We are using Report Builder 3.0

Based on my experience, there's no way to 'intercept' the query that gets passed back to SQL Server, so a Split wouldn't work.
Try creating either a function or stored procedure using the code below (compliments to
http://www.dotnetspider.com/resources/4680-Parse-comma-separated-string-SQL.aspx) to parse the string:
CREATE FUNCTION dbo.Parse(@Array VARCHAR(1000), @Separator VARCHAR(10))
RETURNS @ResultTable TABLE (ParseValue VARCHAR(100))AS
BEGIN
DECLARE @SeparatorPosition INT
DECLARE @ArrayValue VARCHAR(1000)
SET @Array = @Array + @Separator
WHILE PATINDEX('%' + @Separator + '%' , @Array) <> 0
BEGIN
SELECT @SeparatorPosition = PATINDEX('%' + @Separator + '%', @Array)
SELECT @ArrayValue = LEFT(@Array, @SeparatorPosition - 1)
INSERT @ResultTable VALUES (CAST(@ArrayValue AS VARCHAR))
SELECT @Array = STUFF(@Array, 1, @SeparatorPosition, '')
END
RETURN
END
Once created you can do things like this:
SELECT * FROM Parse('John,Bill,David,Thomas', ',')
SELECT * FROM (SELECT 'John' AS TestName union select 'David' AS TestName) AS Main
WHERE TestName IN (SELECT ParseValue FROM dbo.Parse('John,Bill,David,Thomas', ','))
This is what your SQL query would probably look like:
SELECT OperationID, OperationName FROM dbo.Operations
WHERE AreaID IN (SELECT ParseValue FROM dbo.Parse(@Area, ','))
You may need to fiddle around with the Separator depending on whether SQL Server inserts a space between the comma and next value.

Is there any way to create multiple users in a single shot in oracle db

Can Any one tell me, is there any way to create multiple users in a single shot in oracle database.

Hello Nunhum,
I guess this was not my question.. This is not what I m asking.. I know there is not a single sql statement in oracle ,which could create multiusers alike UNIX/LINUX(OS LEVEL), Whatever you have written..is simple creating them one by one.
What I am expecting is to have PL/SQL statement which could help us in this regard.

Is there any way to delete multiple spams at once, right now I go through each individually and delete it, but it's time consuming, thanks

Is there any way to delete multiple spam messages at once. Right now I go through each individual spam and delete one at a time. This is very time consuming. Any tricks out there.
Thank you

Hi LRagsdale517,
You should definitely be able to upload multiple files by Shift-clicking or Ctrl-clicking the files you want to upload. Just to make sure you don't have an old version of the service cached, please clear the browser cache and then log in to https://cloud.acrobat.com/files. After clicking the File Upload icon in the upper-right corner, you should be able so select multiple files for upload.
Please let us know how it goes.
Best,
Sara

Is there any way to add a digital copy movie to an iPhone without syncing with my iTunes library? I use iCloud to sync, not iTunes. So when I go to sync movies, it deletes the other ones I already have loaded on the iPhone. Thanks.

Is there any way to add a digital copy movie to an iPhone without syncing with my iTunes library? I use iCloud to sync, not iTunes. So when I go to sync movies, it deletes the other ones I already have loaded on the iPhone. Thanks.

or is there a way to upload the digital copy to store in my iCloud account?

Any way to add 'Actions' tab on Service order Item level in ICWeb?

Hello,
We are implementing Service orders under CRM2007 Interaction Center.
When we access the Service Orders through backend (t-code CRMD_ORDER), we see an 'Actions' tab on the Item Level which captures all the actions executed at Item Level. This tab is not available from the UI.
Is there any way to add it to the UI? Note that it is available from both backend and UI at Header level but only from backend at the Item level.
Thanks,

Hi Deepali,
I checked the TCODE CRMD_ORDER, there are buttons like AVAILABILITY CHECK on the item level.
When you say it is an Item view on the Web UI, I believe it is a Table View.
In Table Views you will have ON CLICK ACTION buttons next to the Row Selectors.
For most of the views it will be available by default.Identify the Web UI component and open it through BSP_WD_CMPWB.Select the view and open the context node class and check if there is a method
GET_OCA_T_TABLE.
This method will have the code like this, for the buttons
ls_one_click_action-id      = 'DELETE'.
ls_one_click_action-icon    = 'delete.gif'.
ls_one_click_action-text    = ''.
ls_one_click_action-tooltip = cl_wd_utilities=>get_otr_text_by_alias( 'CRM_IC_APPL/DELETE' ).
ls_one_click_action-active = 'X'.
APPEND ls_one_click_action TO rt_actions.
If your component also has these things, then you can simply add the ACTIONS column using Configuration Tool else you need to add this column by coding, redefine the method GET_OCA_T_TABLE and add the buttons.
You need to explicitly create event handlers for the button click actions.
Mostly,it should be available to you by default as it is available in SAP GUI.
Regards,
Masood Imrani S.

Importing a lot of video clips from a Sony camera to FCE; during the Log and Transfer process, is there a way to add multiple clips to the browser instead of one at a time?

Importing a lot of video clips from a Sony camera to FCE; during the Log and Transfer process, is there a way to add multiple clips to the browser instead of one at a time?

Select one and click cmd-A which selects them all.
Then click the import button if it hasn't started already.

Is there any way to add PO no and corresponding line item of PO in VL32N?

Hello,
The scenario is, we have created the IBD and deleted one of the line item and saved it.
We went to VL32N and added the missing line item to IBD but PO number and corresponding item number of PO field of newly added line items are grayed out. We are not able to add PO number in VL32N screen.
Is there any way to add PO number and corresponding line item of PO in VL32N screen of IBD? Our client does not want to create new IBD for same PO. He wants to add the line item in same IBD.
Thanks,
Milind
Edited by: Csaba Szommer on Aug 27, 2011 4:52 PM

Hello,
This thread is pending since long time. No body has answered my question. Can any body suggest me?
Thanks
Milind

Is there any way to add a hyperlink to text in Messages.app?

Is there any way to add a hyperlink to text in Messages.app?
I frequently share links via Messages and would like to have clickable text with a hyperlink beneath vs an ugly URL.

Hi,
In iChat and early versions of Messages this used to be CMD + K keys together
This no longer works.
It seems CMD + K is free as a Modifier keystroke.
I would have added it as an item in System Preferences > Keyboard > Shortcuts.
The issue with that is the fact that there is also no longer an Menu item for it. (so it does not work).
You can add a URL and then Right Click and there is an Edit option but this only allows you to change the URL and not add a URL to existing unsent text.
Right Clicking unlinked Text does not allow you to Edit it either (well there are some format option but not Hyperlinks)
I can't find away around this.
I know in the past the AIM service suffered from malicious code sent in Hyperlinks so this might be the reason.
9:56 pm Monday; January 5, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Any way to add multiple regions to a dialplan

Similar Messages

Maybe you are looking for