Any Way to Change Thickness of Connector Lines for all lines of a Chart?

Post Author: ScottL
CA Forum: Charts and Graphs
Hi All,
I am trying to change the thickness of a Chart's Connector Lines for all lines of a chart and cannot find a way to accomplish this. I can go into Report Preview and individually change the thickness one at a time, but what if I do not know how many lines I will have (as in a Line Chart) ? I can't find a way to do this through Crystal Reports XI.
Many thanks in advance!
Scott

I think it's even easier to just match frame the "source file"... put your playhead on the clip you want to speed change in your sequence. Then type optioncmdf. Perform the speed change in the Viewer, then simply cut it in... Might help to put it up above the older, use the double arrow selection tool facing right to move the clips past this change later... pull the upper track speed changed clip down over the old, and viola.
Gotta say though, it's a lot easier to perform the speed change in the Viewer, and edit it all in as you go rather than doing it after you've put the clip in a sequence. (not always possible to determine what the speed change should be maybe, but sure easier.... FCP 7 handles this problem a lot better for sure, and worth the upgrade price if your machine is compatible.
Jerry

Similar Messages

  • I want to change my country so i can be able to use my imessage but i still have a balance of $.98 on my itunes. Is there any way to change it or an apps for my remaining balanced? Your answer will help a lot! Thank you! :-)

    I want to change my country so i can be able to use my imessage but i still have a balance of $.98 on my itunes. Is there any way to change it or an apps for my remaining balanced? Your answer will help a lot! Thank you! :-)

    Click here and ask the iTunes Store staff to zero your account balance.
    (98475)

  • Any way to change PPI when choosing save for web?  Seems to force 72 ppi/dpi

    I'm doing business cards for clients and submitting them to the printer in PDF which works out just fine.  However when I submit a jpg as a proof (to show orientation) they complain that I should do a higher resolution for the proof.  Illustrator seems to force 72 dpi/ppi (I realize these aren't exactly the same thing) when I use save for web.  If I use "export" instead Illustrator doesn't seem to honor my crop dimensions and I get an export that bares no resemblence shape-wise to the original document.  Why can't I just put 300 ppi in somewhere and get a higher res output?  Thanks for your help!
    Patrick

    It was because the business cards had a particular curved die-cut and they wanted to know exactly where I wanted the cut.  I sent them a 250pixel wide one and they bitched about it but did it.  Yes I sent them a PDF for the printing and it turned out just fine... I just wanted a quick raster export with curved die-cut lines and couldn't do anything other than 72dpi apparently.
    edit: Was also trying to send a client a quick jpg or png proof today and couldn't do anything bigger than 72 dpi (in save for web)... when I tried to export a png instead the cropping was way off.  I remember crop-area-make in older versions of Illustrator but apparently they took that option out while still requiring it

  • Is there any way to change the output audio device for FireFox?

    Hey,
    I'm trying to output the audio from my FireFox browser to my external bluetooth speakers, and I can't figure out how to for the life of me. I'm using google play music (just made the switch from Chrome), and for some reason I can only get FireFox audio out of the system speakers. There seems to be no settings to change this in Windows or FireFox, can someone suggest a plug-in or workaround? Really don't want to go back to Chrome over some stupid issue like this.
    Thanks,
    Joe

    I am pretty sure that the plug ins are responsible for this, My Compuer > Control Panel > Sounds and Multimedia Properties > Audio > Sound Playback, though the menu may be different in 8.1,
    Please see these as well:
    *[[What to do if Firefox won't play any sounds]]
    *[[Fix common audio and video issues]]

  • Is there any way to increase the amount of space for all day events?

    I have iCal on my ipad and my phone, and when I look at the daily view or weekly view, only 1 1/2 lines are shown. If I have a few events that are all day (I keep several calendars) then I have to scroll through them one at a time. And with my fingers, sometimes they go by too fast. Does anyone know how to increase the amount of space? I am using an iPad3, and an iPhone 5, both with ios 7.
    Thank you!

    With Mac OS X, there is no way for you to alter the amount of real memory a program is allocated. This is all done dynamically by the OS. OS X's virtual memory management is far better than 'ole OS 9's.
    What are saying about a memory leak? I take it that Safari is continually using more and more memory. How much memory is it usually taking up after a few hours? Perhaps you should just quit and restart Safari every few hours before it begins failing to respond.

  • Any way to increase the default Heap size for all Java VMs in Solaris 8

    Hello,
    I have a java product that deals with large databases under Solaris 8. It is a jar file, started by a cron job every night. Some nights it will fail because it runs out of Heap memory depending on the amount of records it has to deal with. I know that I could increase the java VM heap size with "java -jar -mx YY JARFILE" command but I have other java products that are showing the same behavior, and I would like to correct them all in one shot if possible.
    What I would like to do is find a system or configuration parameter that forces all Java VMs to use a larger MAX Heap size than the default 16M specified in the Man page for Java. Is there a way to accomplish that?
    TIA
    Maizo

    You could always download the source and modify it.

  • Is there any way to set global language as english for users  in portal

    Hi,
    Is there any way to set global language as english for all the users  in portal (for all the screens,applications etc) irrespective of browser settings,language in jco,user settings in backend .
    the reason why i am asking is we are implementing global implementation project and for some users in switzerland because of their browser is not english they are getting language other than english.we dont want to ask each user to change their browser language.we just want to force the portal to display content only in english
    Thanks
    Bala Duvvuri

    Hi ,
    You can add property  'request.mandatorylanguage=<your_language>'
    and property  'request.mandatorycountry'
    on file 'prtDefault.properties' located in :
    ..server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\portal\system\properties\prtDefault.properties
    Then restart the server.
    See :
    http://help.sap.com/saphelp_nw70/helpdata/EN/42/938297a5061d69e10000000a1553f6/frameset.htm
    Regards,
    Gilad

  • Is there any way to change the label of my VO attributes

    hi ,
    Is there any way to change the label of my VO attributes so that it will have more logical presentation
    Thanks
    Musahib

    Hello Alex,
    I 've just checked my webbeans and the COLUMN_NAME_LABEL property is not use by the EditCurrentRecord, FindForm and RowsetBrowser webbeans.
    I had the following line to my custom EditCurrentRecord, FindForm and RowSetBrowser.
    So I can set Column display name ones for each webbeans.
    It's better than do it with different methods for each webbeans!!!!
    if((String)qView.getProperty(attrs[attrNo].getColumnName() + "_LABEL") != null)
    rField.setPromptText((String)qView.getProperty(attrs[attrNo].getColumnName() + "_LABEL"));
    In the ViewCurrentRecord something was done but with errors. Oracle Developers used getName() method instead of getColumnName()!!! So I rewrite it.
    if((String)qView.getProperty(attrs[attrNo].getName() + "_LABEL") != null)
    sHeader = (String)qView.getProperty(attrs[attrNo].getName() + "_LABEL");
    Hope this will help!
    Email if you need more.
    [email protected]
    Jean-Nokl

  • Can't activate LG Versa on my prepaid acct. it says the device is not supported. Any way to change that?

    Can't activate LG Versa on my prepaid acct. it says the device is not supported. Any way to change that?

        I'm sorry you're unable to activate the Versa on your Pre-Pay line carter123123. Let's figure out what's going on here. Where did you get the phone from? It could be that its on the lost/stolen list; therefore, locked. Have you contacted Pre-Pay to see what exactly the issue is? You can reach Pre-Pay at 888-294-6804.
    Thank you,
    VanessaS_VZW
    Follow us on Twitter @VZWSupport

  • Is there any way to change the in-browser PDF software?

    After upgrading to mountain lion, the in-browser PDF software changed to Adobe. I have been trying to figure out a way to change it back to preview for quite some time now. My reason for wanting it changed back is that the Adobe software is very slow and scrolling always acts up in one way or another (Speeds up, slows down, doesnt work, ect.) I am a chemistry PhD student, so I download pdf journal articles very frequently. I would like to be able to open a PDF article and see if it is worth downloading in my browser.
    Any help would be greatly appreciated

    https://discussions.apple.com/thread/4253917?start=0&tstart=0

  • I recently updated to 10.8.2 and now my notes from my iPhone no longer appear in my mail nor do my calendar appointments. Is there any way to change it so they will appear?

    I recently updated to 10.8.2 and now my notes from my iphone no longer appear in my mail nor do my calender appointments.  Is there any way to change it so they will appear?

    If it has the same (bad) behavior on two different systems then there is a very good chance that the  drive is toast.
    BTW you'll get better response to your questions if the question actually reflects the problem you are having. In this case it would have been better to say you couldn't access the drive rather then that it doesn't show on the desktop.
    regards

  • Hi at the moment my ipod is on manual sync mode. Is there any way of changing this to auto-sync without losing the music on my ipod or library? Possibly more importantly is there a way I can transfer the ratings from my ipod onto my i-tunes?

    Hi at the moment my ipod is on manual sync mode. Is there any way of changing this to auto-sync without losing the music on my ipod or library? Possibly more importantly is there a way I can transfer the ratings from my ipod onto my i-tunes?
    This is so I can delete music from my ipod knowing its rated on my i-tunes so I can then see later if I want to re-add it based on its rating
    Thanks

    Is there any way of changing this to auto-sync without losing the music on my ipod or library?
    Unfortunately there is not.
    Possibly more importantly is there a way I can transfer the ratings from my ipod onto my i-tunes?
    Not without the help of third party software such as this one:
    http://www.copytrans.net/copytrans.php
    B-rock

  • Is there any way to change the default font for outgoing text-messages, in "Messages"? (OSX 10.10)

    Is there any way to change the default font for outgoing text-messages, in "Messages"?
    I can change it for one conversation, but then it resets to the default, tiny font.
    The preferences menu only lets me change the conversation font.
    (OSX 10.10)

    Hi,
    As you may remember there used to be a Messages pane to the Preferences where the Font and colour of the Balloons or background and the Font text colour could be changed.
    And there was a Format Menu for character, word and Sentence changes in the current IM or iMessage.
    Those have gone in Yosemite's version of Messages (Despite it retaining the designation of Messages 8 the same as Mavericks' version).
    All that can be done now is set the size of the font and this has been moved to the General Section of the Preferences.
    The Yosemite version has also been fixed to using the Balloons style of send and receiving any type of messages as well.
    Changing the Font would involved editing the Balloon.transcript file.
    10:34 pm      Saturday; December 13, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Is it possible to change the colour of the Pages' skin, since it is grey, is there any way to change it and make it less tedious?

    Is it possible to change the colour of the Pages' skin, since it is grey, is there any way to change it and make it less tedious?

    fruhulda wrote:
    If you see any grey"background" if is on the left and that is the comment field.
    Hi fruhulda
    It's not the comment field which is a restrictive description.
    In fact it's the window's background.
    Yvan KOENIG (VALLAURIS, France) lundi 26 septembre 2011 12:08:45
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • Thunderbird puts a new message at the end of the thread. Is there any way of changing this preference to listing new message at top of the thread?

    Thunderbird puts a new message at the end of the thread.
    Is there any way of changing this preference so that new messages are displayed at the top of the thread.
    This is is more logical. You need to see new message in thread directly, rather than scanning to end of thread to see what is there.

    No it is not possible. The newest message is attached to the message it is in reply to.
    The conversations add-on might better suit your needs. see https://addons.mozilla.org/thunderbird/addon/gmail-conversation-view/?src=ss

Maybe you are looking for

  • How do I use the Airport Extreme feature.

    For a while I have used a Netgear WGR614 wireless router, which worked fine (with a cable modem). At this time I have a DSL modem, and for the life of me I can NOT get this Netgear router to work anymore. The period for free phone support has expired

  • Part Payments Question

    Hi Experts, Scenario: I enter an invoice in January for £1000 and receive a part payment of £400 in February If I enter an incoing payment for £400 and match the payment against the invoice, the invoice is marked as fully paid and a payment on accoun

  • URGENT -- Forms exit problem

    Hi, I am working with APS9i. I have forms in APS9i. I face problem when i call form b from form a. when i call for the first time form b opens and when i exit form b it comes back to form a but some times when i exit form b it closes all the previous

  • Error 28 while unbricking the iphone on Itunes 8.2.1

    Hi, Just got the Iphone 3GS from the store and tried activating/unbricking it by connecting to the Itunes with active internet connection. It asked me to download an update and install it, it was a huge 400 mb file which i installed, after which i re

  • What to do with GB1 and GB2,when install of GB 3 ?

    I've read that once you use a song created in GB1 or GB 2 in GB3 you cannot open it in original GB1 or GB2 ? Nevermind what it might do to my Logic Express 7.1.1 loop accessability. So I've also been trying to transfer my GB2 with "Grageband Anywhere