Any way to change this annoying behavior of Web Dynpro?

When debugging a web dynpro app it always launches the web dynpro app in the last browser window you accessed.
This is different from how debugging behaves with a normal J2EE app. In that case NWDS launches the app in a brand new browser window.
This is extremely annoying and inconvenient. For example, I work remotely a lot and do a lot of meetings over webex-type software. So when I'm showing someone what I'm doing the debugger will automatically "take over" my webex window instead of launching in a separate window.
Is there any way to change this behavior to force each debug session to open in a brand new browser window?
Thanks in advance for any help.
David.

Hai,
You can do one thing.
If you wan to deploy ur application.
Open a browser window--Deploy new archive and Run.
Dont close the browser, when you wan to deploy it agian,
simple righclick on project--create archive.
simple righclick on project--Deploy.
refersh the earlier browser.
Regards,
Naga

Similar Messages

Hi at the moment my ipod is on manual sync mode. Is there any way of changing this to auto-sync without losing the music on my ipod or library? Possibly more importantly is there a way I can transfer the ratings from my ipod onto my i-tunes?

Hi at the moment my ipod is on manual sync mode. Is there any way of changing this to auto-sync without losing the music on my ipod or library? Possibly more importantly is there a way I can transfer the ratings from my ipod onto my i-tunes?
This is so I can delete music from my ipod knowing its rated on my i-tunes so I can then see later if I want to re-add it based on its rating
Thanks

Is there any way of changing this to auto-sync without losing the music on my ipod or library?
Unfortunately there is not.
Possibly more importantly is there a way I can transfer the ratings from my ipod onto my i-tunes?
Not without the help of third party software such as this one:
http://www.copytrans.net/copytrans.php
B-rock

Thunderbird puts a new message at the end of the thread. Is there any way of changing this preference to listing new message at top of the thread?

Thunderbird puts a new message at the end of the thread.
Is there any way of changing this preference so that new messages are displayed at the top of the thread.
This is is more logical. You need to see new message in thread directly, rather than scanning to end of thread to see what is there.

No it is not possible. The newest message is attached to the message it is in reply to.
The conversations add-on might better suit your needs. see https://addons.mozilla.org/thunderbird/addon/gmail-conversation-view/?src=ss

Airport turns off after restart. Any way to change this preference?

I recently upgraded to 10.4.4 from 10.3.9. Whenever I restart my computer the airport by default is switched off and i have to manually select the network i want to join. Its a small detail, but previously in 10.3.9 the airport would stay on if it was switched on prior to the restart. Is there any way to change this preference or is this just the way airport is set up in 10.4.4?

Try this:
http://discussions.apple.com/thread.jspa?messageID=607421&#607421

Which can be frusterating, any way to change this?

I like to edit my photos using photoshop, but use iphoto to store, when i save a photo after editing it doesn't show the edit until the image is enlaged, any way to change this?

You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
Note that you must use the Save command in Photoshop, not Save As...
Regards
TD

My location bar autocompletes, replacing the already-typed text with the first few letters of the "switch to tab" URL; is there any way to change this?

If I have a mozilla.com window open and I try to type "mouse" to automatically search through my bookmarks and history for something on about mice, for example, the location bar changes the "mo" to "ht", due to the autocomplete replacing what I was typing with the URL of the mozilla.com tab, which starts with http://.
This is really annoying... since if I continue typing the word "mouse" it replaces it with "htuse". Which is useless to me, trying to search for mice.
Any way to fix this?

There is a way that you can do this, but it does mean abandoning CNAME forwarding that you have already set up and just using ordinary masked web forwarding. In this way you can go to the web forwarding section at your domain name registrar and forward your domain name to web.me.com/username/sitename. This will re-direct your site in the way that you want, but because it is masked web forwarding, just your domain name will show as the url for every single page, so you cannot bookmark single pages of a site, just the whole site.
If you use an iWeb blog and you mess around with moving the pages around in your iDisk, then you will loose MobileMe features such as the ability to post comments and also as you have already found, when you publish from within iWeb, it automatically publishes to the same place on your iDisk and not where you have moved your site to.
If I were you I would set up an individual blog with WordPress or Blogger or something similar - if you have an ordinary web host you can upload WordPress there and this then has the advantage of you being able to use your domain name followed by blog or whatever. It is a lot simpler than fiddling around with the iWeb blogging system - I have a blog on my own site and I use WordPress. My site was designed using iWeb and I just create a link from my site to my blog at WordPress - couldn't be simpler really.

Any way to change this default hotkey for DVD app?

My niece is enjoying a Daria marathon from my ripped DVDs which she watches on my TV off my macbook which is in another room. She has a remote keyboard app on her android phone which gives her keyboard and mouse support, and allows her to use FN hotkeys.
What would be the most useful for her, however, is a hotkey for 'Open Recent' menu line in the DVD File menu.
I already know how to create hotkeys based on menu line items, but the 'Open Recent' line item has an arrow which automatically points to a list of recent movies. So the standard procedure for creating a hotkey doesn't work. That darn arrow ruins it.
See attached screenshot, which has the default hotkey circled -- THIS is what I want to change.
Is there a way of changing this hotkey? Any help would be greatly appreciated -- thanks in advance!!

It's not possible. That's because the Open Recent option leads to a multiple selection which you will have to peruse with the cursor to select which one you want. The shortcut only works on menu options that have only one function, i.e. open, close, burn, save as disk image, etc.
OT

HT204135 My printer always defaults to "Scale = 150%" and prints oversized. I always have to set the scale back to "100%". Is there any way to change this default setting?

Hi
My osX Lion loaded iMac always prints with a default "scale" of "150%" and consequently won't print anything on a single page. I always have to go into "Printer Settings" and change it to "100%" to print properly. Is there any way to set this up to default at "100%"?
Thanks!

Hi, just a note that might help. I notice in baltwo's screen shot of the print dialog, that the Preset titled "Plain paper, best" is selected.
anderdan33316, if you have selected a preset, and that preset was created with the "Scale" set to "150%". I suspect your issue is related to this.
for a possible solution,
1. in Safari, open the Print dialog (by cmd-p, or choosing "Print..." from the File menu, either way works).
2. in the dialog, manually set the Scale to 100%
3. in the "Presets:" pull-down menu, select "Save Current Settings as Preset..."
4. enter a label that is meaningful to you, such as "Standard", "Basic", "Default" - it can be modified later
5. print that page from that dialog, and the customized Preset will be one of your choices until you decide to delete it.
hope this helps,
Roy

HT5622 There asking me to verify but when I go to sign in it says I already added this account and doesn't let me see my mail, so I can't verify my account. Any way to change this ?

There asking me to verify but when I go to sign into mail, it says I already added this account then it doesn't let me see my mail, enabling me to verify. Any way to fix this ?

Try opening the Mac App Store and go to the Purchases tab. See if you see the preinstalled iMovie App there. You may have to accept it into your Apple ID if you have not done so already. Then it should upgrade.

Mobile device manager is using over 50% of my CPU and slowing down my computer, is there any way to change this? I have an Ipad and my kids have an Ipod so I can't disable this but I would really like to not have it running all the time

I recently got an Ipad 2 as well as an ipod touch. I have 2 laptops at home that I have synced the devices with, one is running vista and the other XP. Both of the computers are now running really slow and when I checked my CPU usage it is showing that mobile dvice manager is using around 50% of my CPU and it is constantly running in the background. I am wondering of anyone has any suggestions on how to keep dvive manager from running when my Ipad is not even connected to the computer.

I recently got an Ipad 2 as well as an ipod touch. I have 2 laptops at home that I have synced the devices with, one is running vista and the other XP. Both of the computers are now running really slow and when I checked my CPU usage it is showing that mobile dvice manager is using around 50% of my CPU and it is constantly running in the background. I am wondering of anyone has any suggestions on how to keep dvive manager from running when my Ipad is not even connected to the computer.

HT201209 My friend has sent me a code that doesn't work with a US based itunes account (says UK only). I'd love to hear the music he has bought for me. Is there any way to change this?

Please help me work out a way to redeem a voucher sent by my friend for some music -- saying it's only in UK based accounts that it's redeemable.

You cannot redeem codes from one country in another. Must be redeemed in the same country where it was purchased.

Nano doesn't keep my place in a song list. Any way to change this?

I want to be able to return to the point that I last listened to, without having to search. Is this possible?

Unfortunately there is not.
B-rock

My hotspot is turned off. Other household iphone can turn my hotspot on and don't get asked for a password. Any way to change this?

I have iphone 6, my son has iphone 5c. My hotspot is turned off. My son gets option to tether to my hotspot, if he clicks on that then it remotely turns my hotspot on! Can other iphone users do the same? Worried about other people using all my data.

The password for the hotspot will remembered by the devices that have connected to your hotspot.
If you can't reset the network settings on those devices, which would also delete all network passwords on those, just chafe the hotspot password on your phone in Settings/Hotspot/Wi-Fi password.

Is there any way to change the web dynpro Appl. description at runtime

Hi All,
Is there any way to change the description of the Web dynpro Application at runtime.
Thanks,
Arti.

There is an API to change the application description at runtime, but it will be new in NetWeaver 7.0 Enhancement Package 2 (so you probably don't have access to it yet). For the future here is a sample of the API:
wd_this->wd_get_api( )->get_component( )->get_application( )->set_window_title( lv_window_title ).

Any way to change picture timezones?

Hi,
I'm cleaning an older Aperture library and I've discovered a number of pictures that are listed with the incorrect timezone. Is there any way to change this after the files are already imported?
To clarify: Aperture seems to store (in its own metadata) not just a file date/time, but also the timezone that that date/time is specified in. This is set at time of import, but in the case of these pictures, it was set incorrectly. The result is that the files have the wrong metadata and will either say they are taken in the middle of the night or will mis-sort when displayed along with other pictures taken around the same time (but with the timezone set correctly). The "Metadata|Adjust Date and Time..." command seems to be able to change the time, but not the timezone in which that time is specified. Many of these files have been substantially edited within aperture since importing, and I certainly don't want to lose those edits...
Any ideas?
Thanks,
Mike

You can change the timezones with the command "Metadata > Batch change".
This panel has a setting "Adjust Timezone".
Specify te timezone the camera has originally been set to
And specify the timezone you want to see on the images.

Any way to change this annoying behavior of Web Dynpro?

Similar Messages

Maybe you are looking for