Any way to confirm Apple TV is using 802.11N?

I just went out and bought an Airport Extreme (yes, I'm being assimilated)... How do I confirm the Apple TV is using Draft-N?

I'm not sure there is an easy way, but you could set up your extreme to use n only, that way if your tv still sees your network, you know it's using n.
(Airport Utility/Airport/Wireless/Radio Mode)

Similar Messages

Forcing Apple TV to use 802.11n

My wireless network is as follows.
Airport extreme connected to internet via cable modem.
Airport express configured as remote WDS base station.
Apple TV connected via wireless to network.
My problem.
Both the airport express and the airport extreme are within range of my Apple TV however the Apple TV appears to connect to my wireless network via the airport express limiting it's speed to 802.11g. The airport extreme capable of 802.11n is clearly within range of my Apple TV and I would like it to only connect via 802.11n. Is there any setting within the Apple TV to force it to stay on the 802.11n network even if the signal from my airport express may be stronger.
20" iMac core duo 2.0Ghz, Black Macbook core duo 2.0Ghz, 17" iMac 1.8Ghz G5, Powermac G4 1.0Ghz Mac OS X (10.4.9) Apple Extreme (pre-n), Airport Express, Apple TV

DML,
RE:Another option would be to set up the Extreme to use Access Control, limiting it to specific machines, by entering MAC addresses. If you don't enter the Apple TV's MAC address into the Express, would it be forced to find the Extreme, where it has 'permission' to access the network ?
That was an awesome idea and I think it might solve my problem. I setup the access control list on my express to only accept connections from my macbook. I'll post again after some further testing with my Apple TV. Many Thanks.
20" iMac core duo 2.0Ghz, Black Macbook core duo 2.0Ghz, 17" iMac 1.8Ghz G5, Powermac G4 1.0Ghz Mac OS X (10.4.9) Apple Extreme (pre-n), Airport Express, Apple TV

Recorded a video in portrait mode and want to switch it to landscape mode is there any way else to do it without useing quicktime pro....hope apple fixes this in ios 7 the video should come out in landscape regardless of the way you hold your phone

is there any way else to do it without useing quicktime pro....hope apple fixes this in ios 7 the video should come out in landscape regardless of the way you hold your phone or if you start in portrait and go into landscape while recording

You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse

Is there any way to contact apple thru email??

Is there any way to contact apple thru email, cause im trying to log in to this depot.info.apple.com/ipod site which is not working and i need to send in my ipod to be fixed. how can i contact apple, I called them but they are no use and wont fix it.

Hi i got my ipod video and i have insurance on it. It keeps on freezing like once every day and i cant fast forward or rewind on videos. My battery also lasts only 3 or 4 hours. Do you think they will give me a new ipod video. Also is there a way to contact them through email?

Any way to confirm JCE is installed?

Hello...a consulting partner installed JDK for a system of ours and was required to also install JCE. I need to validate that install. Any way to confirm whether JCE was installed?

Well, the javax.crypto.Cipher class in included in JCE, so if it's not present, it means JCE is not there. Try this
try {
Class.forName("javax.crypto.Cipher");
} catch (Exception e) {
System.err.println("Sorry, but there's no JCE");
}In fact, if you are using Sun's JRE equal or higher than 1.4, JCE is already included.

Is there any way to get around having to use iDVD to burn DVD?

Is there any way to get around having to use iDVD to export FCE to DVD?
I've been trying to burn a FCE2 sequence to DVD. A friend of mine told me all I had to do was put a blank DVD in, click on the icon on the desk top, export the sequence to Quicktime and drag the QT sequennce into the DVD icon and click burn.
Well something happened! But there's nothing on the DVD!! What am I doing wrong? I loathe iDVD. i don't want to author. I just want to burn the project on a DVD. Please advise. Thanks.
Chuck
iMAC 1.25 GHz PowerPC G4 Mac OS X (10.3.1)
iMAC 1.25 GHz PowerPC G4 Mac OS X (10.3.1)

If you export a sequence at full resolution to can burn it onto a DVD as a data DVD, but this is for transportation purposes only. At full resolution the DVD, especially as it fills up, will not have sufficient throughput to sustain good playback of the material. That's why the material is encoded into MPEG-2 for DVD authoring. If you want to make a DVD for set-top playback it has to be authored to include the DVD format structure. There is no way around that. If you don't like iDVD, take a look at Final Cut Studio, you might prefer DVD Studio Pro. Or you might what to look at Roxio's Toast. It has basic authoring capabilities. Personally I don't think direct playback hardware solutions (except for seriously expensive ones) produce acceptable quality, but that's just me.

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab?

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab? When there was support for Google Toolbar, I was able to do this; now, whenever I want to search for something, I have to open a new tab to do it, and cut-and-paste my search into the search field in the new tab. I used to be able to highlight, drag, and drop something into the search field and have it automatically open in a new tab. This is enough for me to switch to Chrome . . .

Set a preference to have searches from the Search Bar (upper right) automatically open all searches in a new tab
#type '''about:config''' in the URL/Location/Address bar and press the Enter key
#if you see a warning, accept it (promise to be careful)
#Filter = '''browser.search.openintab'''
#in the lower panel, double click the item (or right-click and choose "Toggle") to change the value to "true"
#close the about:config tab and test
#See:
#*For help with opening/using about:config, also see: http://kb.mozillazine.org/About:config
#*Also see: http://kb.mozillazine.org/About:config_entries (click on "Browser", scroll down to browser.search.openintab)
'''Search Bar''': http://support.mozilla.com/en-US/kb/Search+bar
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
About Google toolbar............
Google decided that they will no longer produce the Google Toolbar for Firefox 5 and newer version. It is best to move on to other alternatives than to try any "hacks" to the toolbar that may or may not perform in the future. Future versions of Google toolbar will only work with IE7-9. Google Toolbar is not available on any other browser, even Google's own browser.
*http://googletoolbarhelp.blogspot.com/2011/07/update-on-google-toolbar-for-firefox.html
*https://support.mozilla.com/en-US/kb/google-toolbar-not-compatible-firefox?s=google+toolbar&r=0&as=s
*http://www.google.com/support/toolbar/bin/answer.py?answer=1342452&topic=15356%29
*Google Toolbar 8 FAQ (IE only): https://www.google.com/support/toolbar/bin/answer.py?hl=en&answer=1111588
'''''To access your Google Bookmarks visit''''' www.google.com/bookmarks.
Alternatives:
*http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
*https://addons.mozilla.org/en-US/firefox/addon/googlebar-lite/
*https://addons.mozilla.org/en-US/firefox/addon/gbookmarks-google-bookmarks-fo/

Is there any way to generate Gantt chart by using oracle 9iDS?

Is there any way to generate Gantt chart by using oracle 9i reports builder
Can you please send me the link or more information on oracle 9iDS.
Thanks

Hi,
Oracle9iDS itself doesn't support creating Gantt charts. The option oyu have is to use Oracle Graphics 6i, because there is no Graphics in 9i, and configure it to run with Oracle9i Forms. There exist a whitepaper at otn.oracle.com/products/forms that explains how to make Graphics 6i work with Forms 9i.
Frank

Only an exclamation point shows up when I click a thumbnail in my iphoto folder. Is there any way to recover these photos by using the thumbnails?

Only an exclamation point shows up when I click a thumbnail in my iphoto folder. Is there any way to recover these photos by using the thumbnails? Please help. Thanks!

That exclamation mark is displayed when iPhoto cannot link to the original file. First make sure you are running a "managed" library by checking iPhoto's Advanced preference pane to make sure the checkbox to copy files into the library during import is checked.
Click to view full size
If it is checked you can try the following: make a temporary, duplicate copy of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Is there any way to ask Apple to add a certian TV Show (Star Trek : The Next Generation) to the iTunes store in Australia?

Is there any way to ask Apple to add a certian TV Show (Star Trek : The Next Generation) to the iTunes store in Australia?

You can try requesting it via this page : http://www.apple.com/feedback/itunes.html
But utlimately it's the TV studios choice, they are the people who will have to grant Apple a license to have it in the Australian store.

Any way to invoke a servlet without using "action=" in HTML

Hello,
Is there any way to invoke a servlet without using "action=" attribute of Form tag in the HTML form.
I.e. if I need to run the servlet from a hyperlink, how could it be possible?
Or If I need to run a servlet from a "window.Open()" method using java script, how could it be possible?
The error I am facing...
HTTP Status 405 - HTTP method GET is not supported by this URL
type Status report
message HTTP method GET is not supported by this URL
description The specified HTTP method is not allowed for the requested resource (HTTP method GET is not supported by this URL).
Thanks,
Sandeep

Maybe your URL needs to use POST.

With just ONE inatentive sweep of my finger one page of my note was disappeared! Is there any way it can be recovered without using the help of iCloud backup?

1. With just ONE inattentive sweep of my finger one page of my note disappered. Further more, the same page in my iPad was deleted automatically too! How could this happen? Is there any way it can be recovered without using the backup feature from iCloud? The data is vey important to me?
2. I havn't connect the power code to my iPad yet, the backup copy in the iClout was before the accident as I checked in iPad. Is there any way that I could open my notes in iCloud backup so that I can copy the missing page and move back to my iPad and iPhone?
Thanks a lot for any help!
Xueyu

Sorry, no. The only way to restore this note is to restore from a backup that contains it.

Is there any way to find out a Tcode used by user in a particular interval.

Hi
Is there any way to find out a Tcode used by user between 10/8/2009 to 31/8/2009, in production?
Satish.

Yes i have been trying SE16N only. But i am unable to pull data based on dates (Aug/8 to Aug 21)... its showing list of users who have accessed the tcodes directly for entire month....
Se16n ->Export mode->month->08/2009
---> Transacction profile -->Standard
I want to find out only users who have used a particular tcode during those dates.....in august..
Satish

Any way to communicate with Serial PORT using JavaScript

is there any way to communicate with Serial PORT using JavaScript ??
Dont tell me to do it in java because I need to this on client side not on server side.
such as when client pressed the button, a javascript function will be called and in that function I need to communicate with the serial port of that client... That action will not go to server side.

Is there any way to send a string of bytes to the serial port from the client side ?
Just a button on the web page that sends out stuff to the comport.
I was hoping to do this using java script also ..

Just updated to the latest version of itunes and now my iphone won't sync with my email or calender because the apple mobile device is not started. Anyone know any way roudn this - Apple wish to charge me to fix this. not impressed

just updated to the latest version of itunes and now my iphone won't sync with my email or calender because the apple mobile device is not started. Anyone know any way roudn this - Apple wish to charge me to fix this. not impressed

It is working now. I no longer get the message about the item not being available in the US and I can access the store.

Any way to confirm Apple TV is using 802.11N?

Similar Messages

Maybe you are looking for