Any way to control which word a book page ends with, without have to play with tracking?

Hi, there.
I have a number of threaded text frames, and I want each text frame to end with a certain word.
Example: "The cow jumped over the moon, and ate the cheese." I want page #1 to end with the word "jumped," page #2 to end with the word "moon," and page three to end with "cheese." I want all the frames to be the same size and all text to be the same size. The text will be justified.
Do you have any ideas?
Thank you very much

Schmaltzkopf wrote:
What if I don't want to affect the text by adding a soft enter?
Then use lots of No Break.

Similar Messages

Is there any way to control automator through voice commands?

is there any way to control automator through voice commands?
Im simply trying to program my macbook pro early 2011 8gigs ram to resound to voice commands using automator but I haven't found any discuss on the subject.

I have some AppleScript that expects a Pages (v5.2.2) document opened. It will then then speak the document name, and the count of words in the document. Or, I can trigger Speakable items and tell it to, "Switch to Pages" which it does immediately, because this is part of its repertoire of built-in commands. Then speak Word Count?
In Automator, I created an Application, in which I dragged/dropped the Library > Utilities > Run AppleScript action into the workflow window. I replaced the AppleScript boilerplate with my existing AppleScript code that speaks the word count, and saved the Application into <login dir>/Library/Speech/Speakable Items folder as Word Count? (without the .app extension). It can also be saved in the Application Speakable Items > Pages sub-folder under the general Speakable Items folder.
Next, I turned on Speakable Items in System Preferences > Accessibility > Speakable Items.
It took several tries to get a spoken result from the Automator application, but it did work. Even with a calibrated microphone, and speaking about 18 inches from it. About 2 successes for ten tries. If I just put the AppleScript (without extension) in the same folder, my success rate would improve to 5/10. You may grow very weary of the repetition necessary to get Speakable Items to work. A small pink text banner also appears with the spoken content in it — below the Speakable Items monitor on the screen.
Automator is scriptable. This means that in AppleScript, you can dynamically build an Automator workflow, and then execute it.

Is there a way to control which processes should run or not ?

I have a mac with Snow Leopard and was wondering if there was an app or some other way to control which processes run at startup and which dont etc ? I made a new user account and logged in and noticed that it ran like brand new. It loaded up faster and smoother than my normal account. I looked at the processes running and noticed that this new account loads up like a 4th of the processes my main account runs at startup . How can i make my main account run the same processes only so it will run as smooth and fast ? is there an app for this ? thanks (an app that also tells me what each process is for will help too so i can close the processes that i dont need and so that i dont have to close them every time i reboot, but that it will also stop them from automatically loading)
Message was edited by: Pianohero

most of the apps that would run at login (which btw is different from startup) automatically are things in the login items. there may be a few items in homedirectory/library/lauchagents but that would be the only place. other than that what runs at login on one account will run on the other. note however, that if you remove any launchdaemons from homedirectory/library/lauchagents the apps that made them may not work properly depending on what those launch daemons do.
what 50 other processes are you referring to that you see on your main account? most of the stuff you see in the activity monitor are system processes that should not be removed. normally they hardly consume any CPU or RAM.
Message was edited by: V.K.

Is there any way to control the volume on my Apple TV?

Here's the scenario: I have a small amplifier under my couch that controls the speakers connected to my Apple TV. When I use Airplay from my iPhone to listen to music, I'm able to control the volume right from the music App on my phone- this is perfect because I don't like to reach under the couch to change the volume. However, there are two scenarios when I cannot seem to adjust the volume anywhere except on the amp. These are:
First: Using Airplay while playing a video from my MacBook Pro to the Apple TV. In this case, the volume slider in iTunes suddenly has a little lock icon on it and is unadjustable. Is there any way to unlock the volume?
Second: When using the Apple TV directly to play any media- music or movies. The volume up and down buttons on the Apple TV don't control the volume. I'm forced to reach under the couch to adjust the volume- which happens quite frequently. Is there any way to control the output volume of the Apple TV?
The lack of volume control has been super disappointing. I've been a (multiple) airport express user for years so kind of expected Airplay to work the same for video- with the ability to control the volume from whatever device was transmitting. Can anyone help me?

Andrew- this is how I would expect things to work. However, when I use airplay from my iPhone to say, play a youtube video, the volume on the phone is suddenly rendered useless and I'm forced to adjust the amplifier. When I just play audio from the phone, the volume works.
It's the same on my macbook pro. If I mirror the screen, my computer's volume affects the speakers volume. However, if I am in itunes and play a movie and use airplay for that, I get a lock on the volume. Is this a setting somewhere?

PLW-07203, any way to control the PLSQL_WARNINGS values specified by Raptor

While debugging some packaged code and compiling the specification through Raptor, I got the PLW_07203 warning, which was deemed to be an error and therefore prevented me from compiling the code successfully in Raptor.
First, is it correct for Raptor to consider these types of compilation warnings to be errors?
Second, since Raptor sets the PLSQL_WARNINGS parameter for the session, is there any way to control that parameter setting? For now, it seems to always specify it by executing ALTER SESSION SET PLSQL_WARNINGS = 'ENABLE:ALL'.
Third, is it possible for Raptor to tell that I've loaded the source for a package specification or body from the data dictionary and have made no changes to it before I ask it to be compiled? Now, it seems that Raptor always is recompiling the package code by using the CREATE OR REPLACE construct, so it will overwrite any existing PLSQL object settings that may have been defined for the code previously. If you could detect that I'm simply asking you to recompile the source (primarily to simply get it compiled with debug information), then you could use the ALTER PACKAGE syntax for the recompilation. That with the ability to specify whether or not the REUSE SETTINGS clause would allow people to compile packages without getting into problems from Raptor changing the PLSQL_WARNINGS session parameter.

1) It's already bugged.
2) This is planned for production
3) There's a right click compile from dictionary which just does an alter ... compile. The new drop coming this week will change how browsing code works so that there's a read-only copy with an edit button to launch the editor.
-kris

Is there any way to control or change the email notification format deliver

Hi,
Is there any way to control or change the email notification format delivered by iBots? I have created an iBot to deliver the scorecard report to the team with type chosen as 'Attachment (HTML)' option. With this definition of iBot - notification being sent in MIME HTML (.mht) format. Due to some security settings at my email client - the attachement gets quratined because of .mht format. So, I am looking for an option to send the notification only in HTML (.htm) format with which I don't have any issues with my email client?
Any help is really appreciated.
Thanks,
Vency

Hi,
You try this
change format of to whichever you required in this file.. I havn't tested it yet..
I hope it will help you..
thank you
E:\OracleBI\web\app\res\b_mozilla\delivers\deliverycontenteditor

Any way of removing which site that pops up at "best search"?

Is there any way of removing which site that pops up on top of the list ”bästa sökträffar” (translation in english would be ”best search” I assume)?
In this case I want to go to IKEA’s swedish domain ikea.se, since that is the relevant domain for me. When I start typing ik.. Safari automatically highlights IKEA’s international domain site ikea.com. I don’t want this. I never visit that domain, since I then have to choose country Sweden when I arrive at the site anyways. This means that I have to finish typing the entire URL ikea.se everytime, otherwise it will direct me to the international site. How can I stop this from happening??

Triple-click the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
/Library/LaunchDaemons
In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "LaunchDaemons" may open. Look inside it for a file with a name of the form
          com.something.daemon.plist
Here something is a variable word, which can be different in each case. It could be "cloud," "dot," "highway," "submarine," "trusteddownloads," or pretty much anything else.
There may also be a file named
           com.something.helper.plist
in the same folder.
If you find files with names that fit the above description, post what you have for "something."

Is there any way to tell which formulas a particular cell is in, reverse look-up style? That is, is there a way to search somehow for which formulas in a sheet contain a particular cell in them without opening all of them up? If not, it would be nice

Is there any way to tell which formulas a particular cell is in, reverse look-up style? That is, is there a way to search somehow for which formulas in a sheet contain a particular cell in them without opening all of them up? If not, it would be nice.
I'm fixing a Numbers document that I use in business daily that's become overly complicated, but while I want to clear/delete a number of cells in it to clean it up, I'm not sure if those cells are being used as source for other formulas on the page. I don't have to open all my formulas one by one to see if that cell is in there, do I?! That'd be a huge amount of work if I wanted to eliminate say 10 cells to search each formula on the page to see if it is in there or watch all the cells when I delete that cell to see if the numbers change! There's got to be an easier way! Right click doesn't seem to be any help.
I don't want to damage my daily tool to make it cleaner and reorganize it. Is there really no way to do a reverse look-up of which formulas a particular cell is in?! Any time I click on a formula it highlights all the CELLS in that formula. Why can't I (or can I?) do the reverse and see all the FORMULAS that contain a particular cell?
As a Numbers document ages or gets used frequently, you can sometimes forget which cells are tied to which formulas. You just look for the results of your formulas. Would be a nice thing to be able to do. Thoughts? Work-arounds? Answers?

Answer would be no unless application provided such feature. Numbers does not as far as I know.
Note that even if you have complete list of formulae used in a table, identifying formulae referencing any given cell is not simple.
E.g., cell T20 is referenced not only in
=T20+1
but also in
=SUM(T)
=SUM(20:20)
=SUM(S19:U22)
=OFFSET(S1,19,1,1,1)
=INDIRECT("T"&(10*2))
In order to identify such formula, we have to actually evaluate it to see if it references the given cell. Especially such formula as OFFSET() and INDIRECT() may not be found by static parser because their parameters can be dynamic.
Sorry to be the bearer of bad tidings.
H

I have downloaded a Audio Book from Itunes Store, but rencently i have had to reinstall windows, is there any way to re-download the audio book from Itunes, i know that the audio books are one time downloads, but is there any way to get the audio book

I have downloaded a Audio Book from Itunes Store, but rencently i have had to reinstall windows, is there any way to re-download the audio book from Itunes, i know that the audio books are one time downloads, but is there any way to get the audio book back as i have already paid for it once and i would not like to pay for it twice.

If you haven't got a backup copy and if it's still in the store then you can try contacting iTunes support and see if they will grant you a re-download (there is no guarantee that they will) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Non-Apple Keyboard: any way to control system audio volume?

I have a non-Apple Keyboard on my new Mini Lion 7.2.1
Is there any way to control system audio volume via the keyboard ?

Well. I can do this. But just because, on my Apple keyboard, there are the keys that do the job. There's a key to mute, and the keys to adjust low and high the sound. But keyboard shortcuts, I don't think exist. The aren't in keyboard shortcut in Keyboard panel, within System Preferences. The bottom line is that isn't a menu item in Finder for lower sound and higher sound. The only option would be an AppleScript that you save as an applet within Scripts menu (activated in Finder via Script Editor) and you invoke with a shortcut... Well, you can do it, if you open the script Set Output Volume in UI Elements Script folder within Scripts folder. Try it out!

Is there any Way to find Which case is Executing in LabVIEW VI programmatically and Display it..

Is there any Way to find Which case is Executing in LabVIEW VI programmatically and Display it..
Solved!
Go to Solution.

I wrote this a few years ago: http://lavag.org/files/file/199-state-machine-follower/
This JKI RCF Plugin sets the Visible Frame property of a Case Structure while the owning VI is running. Use it to follow the execution through the cases in your string-based State Machine/Sequencer when Execution Highlighting isn't fast enough (and, it's never fast enough).
The use-case I wrote this to improve is setting a Breakpoint on the Error wire coming out of the main Case Structure and probing the Case Selector terminal so I can float-probe wires during execution. The problem with this is that I had to manually select the current frame every time. This is boring, so I developed this plugin to automatically set the Visible Frame to the case most recently executed.
You might be able to adapt it to your needs. The basic idea is that a custom probe on the wire to the Case structure's selection terminal sends a notification to a VI that displays the appropriate case.
We might be able to help you develop something easier if you'll give us more information. Is it OK if the code to display the case is in the same VI?
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice

Is ther any way i can upgrade my mack book air 256gb to 512 gb ?

Is ther any way i can upgrade my mack book air 256gb to 512 gb ?

You can be it's very expensive.
http://eshop.macsales.com/shop/SSD/OWC/Aura_Pro_Express

When using two iPhones (iOS 5) on the same computer/iTunes Is there any way to choose which songs, contact info., etc. are sync'd to each device?

When using two iPhones (iOS 5) on the same computer/iTunes Is there any way to choose which songs, contact info., etc. are sync'd to each device?

For each iPhone...
From the Summary tab select: Sync only checked songs and videos.
Under Options in the Summary tab select: Sync with this iPhone over Wi-Fi
If you want you can select: Manually manage music and videos.
Select the music you want synced from your iTunes library, same with Contacts.

Any way to tell which module the user is in?

Although I try to avoid it, I occasionally find myself writing plugins that do menu manipulation and other keystroke emissions that depend on module.
It would be great if there was a way, *any* way, to tell which module is active - even if it entailed sending keystrokes and testing response...
~R.

Hey jarnoh,
Maybe the module name in the window title only disappears when the app loses focus. I thought I'd seen it disappear at other times too, but I could be mistaken. (seems to have nothing to do with startup - my mistake).
UPDATE: caught it: If I minimize Lightroom, then maximize it, the window title just says "Lightroom" (no module name). Some places I click, e.g. on a photo, it doesn't change, other places I click - it changes to show the module name.
Thanks,
Rob

Any way to control money input?

Is there any way to control money input, I mean for example
If someone inputs 12.52356 dollars I have to control it until the user inputs 2 digits after the decimal dot.

BTW using floating point numbers to represent money is not very accurate. You would be better to use whole numbers and then only convert to floating point when you want to display it. So for 12.87 you would actually use 1287 instead. Check out the following.
double dollars = 12.87;
double change = dollars - 4 * .45;
System.out.println(change);
int money = 1287;
int remainder = money - 4 * 45;
System.out.println(remainder / 100.00);Output:
11.0699999 - inaccurate
11.07 - accurate

Any way to control which word a book page ends with, without have to play with tracking?

Similar Messages

Maybe you are looking for