Any Way to down load of SAP Employee Lookup project code

HI,
We could download the SAP Employee Lookup from itunes on iOS and test tehre itself of mobile.
is there any way we can get the packaged code for download , so that we can deploy on the SUP server and test the same.
or do some customization to the exisitng code
Regards
Chandra

hi,
I know this may not answer the question but i think you have gone one step ahead of me, and I wish for you to assist me with the instalation of SAP Employee Lookup.
While following the configuraiton guide, I needed to add a service. Whilst adding the service, it asked me for a package which is not stated on the configuration guide. Which package do i need to create? Do I need to create a new package by running transaction code se80 and if so, what will be within the package?
Cheers

Similar Messages

HT204406 Is there a way to down load specific, individual songs on my iphone 5 or ipad 2, through iTunes Match, rather than having to download the entire album in the Cloud?

Is there a way to down load specific, individual songs on my iphone 5 or ipad 2, through iTunes Match, rather than having to download the entire album in the Cloud?

Begin by tapping on the Settings app.
Scroll to the Store menu and tap that.
This is where you can manage your Automatic Download settings. You can control Music, Apps, and Books (if you have the iBooks app installed) here. Slide to On any of the kinds of files you want iCloud to automatically download to your device.

Hii all is there any way to manage payroll in sap B1?

hii all is there any way to manage payroll in sap B1? if not then is i can manage with this add-on ?

Hi,
you can use payroll addon that is developed by certain SAP partner company.
if you want to manage the payroll manually, you can use vendor master data as employee and using journal entry to accomodate payroll transaction or using outgoing payment.
JimM

TS3212 every time i try to download itunes my computer comes ups up with an error code half way through down load error code 2330

every time i try to download itunes my computer comes ups up with an error code half way through down load error code 2330

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

HT204053 My company has recently issued company ipads. I currently have a iMac for personal use in which I have a iTunes account. Is there a way to down load all the music I have on my iMac iTunes account to my iPod as well?

My Company has recently issued company ipads. I currently havea iMac for personal use in which I have an iTunes account. Is there a way to down load all the music I have on my iMac itunes account to my iPod as well? Also will I be notified on email when I have a response to my questions? Thanks for your response!

Connect the iPad to your iTunes account.

Is the any place can down load a copy of CS3 Master collection disk 1

Is the any place can down load a copy of CS3 Master Collection disk 1.
I bought Adobe Creative Suite 3 Master Collection.
it has never been registered.
It ALL INSTALLS OK, WITH THE EXCEPTION OF ILLUSTRATOR.
I was told to go to your fttp site I did so and it is funny but you have the creative suite there for CS, CS2, CS4, CS5 and CS5.5 but not CS3.
There is Illustrator CS3 there but not sure if that will work with the Master Suite and the Master Suite serial number.

Please go through the mentioned link and download the CS3 Master Collection: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

Is there any way to click the System Message Box button through code?

Hi,
Is there any way to click the System Message Box button through code?
Is there any way to restrict the System Message Box ?
The requirement is, i need to open the MRP Wizard form in MRP.it s run automatically.after completion of the wizard is there finish button.after clicking of the finish button, there have a system message. i want to click on "Yes" button through coding.
when system message box open.my code is stopped.if i press yes code is running.
Thanks in advance.

Thanks for replay
bellow given the code
i am using, when i call the finishMrp function its going to take the itemId from XML and click to the finish button.
There have a system message .when system message fair my debugging stopped. Please give me any idea.
Public Function Execuate() As Boolean
Dim strSQL As String
Dim objRS As SAPbobsCOM.Recordset
    Dim intLoop As Integer
    Dim objForm As SAPbouiCOM.Form
    objForm = objAddOnCentral.objApplication.Forms.ActiveForm
    objRS = objAddOnCentral.objCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
    strSQL = "SELECT U_MRPCode From [@ACSYMRPLIST]"
    objRS.DoQuery(strSQL)
    If objRS.EoF Then
    Throw New Exception("No MRP Scenario Scheudled")
    Return False
    End If
For intLoop = 1 To objRS.RecordCount
            objForm.Freeze(True)
            If intLoop = 1 Then
            initializeMRPRun()
            System.Windows.Forms.Application.DoEvents()
            Else
            reinitialize()
            System.Windows.Forms.Application.DoEvents()
            End If
            MRPRun(objRS.Fields.Item("U_MRPCode").Value)
            System.Windows.Forms.Application.DoEvents()
            objForm.Freeze(False)
            objRS.MoveNext()
        Nex
        finishMRPRun()
        Return True
    End Function
   Private Sub finishMRPRun()
        Dim strResource As String
        Dim objXML As New XmlDocument
        Dim objXMLNode As XmlNode
        Dim objXMLNodeList As XmlNodeList
        strResource = System.Reflection.Assembly.GetExecutingAssembly().GetName().Name & "." & "AutoStart.xml"
        objXML.Load(System.Reflection.Assembly.GetExecutingAssembly.GetManifestResourceStream(strResource))
        objXMLNodeList = objXML.SelectNodes("/AutoMRPScript/FinishMRP/Instruction")
        For Each objXMLNode In objXMLNodeList 'objXML.ChildNodes.Item(1).ChildNodes
            Select Case objXMLNode.Attributes("OPType").Value
                Case "2"
                    systemMessageactiveFormButton(objXMLNode)
            End Select
        Next
    End Sub
Private Sub systemMessageactiveFormButton(ByVal Instruction As XmlNode)
        Dim objForm As SAPbouiCOM.Form
        objForm = objAddOnCentral.objApplication.Forms.ActiveForm
        objForm.Items.Item(Instruction.Attributes("ItemID").Value).Click()
    End Sub
Edited by: Badulla Sk on Dec 31, 2009 11:24 AM
Edited by: Badulla Sk on Dec 31, 2009 11:25 AM

Looking for a way to down load music from my pc to my iPad?

I am looking for a way to put my music from my media player on my pc to my ipad2. is there any way i can do this?

leftygirl1962 wrote:
how do you know if it is down loading or transfering to my itunes player?
Click on the Music Heading - under the main Library Heading on the left side of the iTunes window. That will open a window on the right side where you can see all of your music in iTunes

Is there any way to calculate tax in sap at document level

Is there any way to calculate tax at document level & Round the tax amount at document level, i m giving below the details of the scenario
item A = 110 Rs
Item B = 150 Rs
Tax is not calculated on individual rows it is calculated on document total i.e = 260 Rs @ 4 % = 10.4 & then this amount needs to be rounded i.e = 10 Rs is there any procedure to map it in SAP if u want any additional information revert back to me

Hi
Tax for Whole Document only is not possible, u have to include a tax per Row.
U can setup automatic tax by setting the setup here - Admin- setup-financ- tax- taxcode determination..
Rounding is posibble- for this u have to setup in Admin- setup-financ-currencies - rounding..
Also Admin - system intialiisation - document setting- rouding by document or by currency.
Giri

Nokia 1208 - Any way to d/load ringtones?

Sorry if this has been discussed elsewhere. I've searched the forums and FAQs and can't find an answer to this simple question: Is there any way to download ringtones onto a Nokia 1208? I have the cable, I d/l'd some sort of freeware that doesn't work. The manual is no help. I think the answer is going to be "no", but I want to be sure.

The 1208 has no cable connectivity (the USB socket if there is one is only for service personnel), no bluetooth connectivity and no microbrowser. It is a budget range phone with extremely limited features.
The only way to get new ringtones onto it is to have your provider or a third party vendor send them to you by SMS. You cannot transfer MP3 or MIDI files over to it and use them.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Can't open a file. It may be corrupted? Any way to rescue all or part of the project?

With all the updates FCPX has undergone and the constant updating of my libraries I seem to have lost the ability to edit a previous project which is now critical to me.
What happens is:
I locate the event in the library
I click on the project (so that it will load it in the timeline)
I get the drop down window saying "Loading 'name of project' into the timeline"
That's it. It never gets past this. FCPX crashes. Only a force quit will bring it back.
I'm wondering if there is any way to bring it back, or at least rescue some or most of the project.
Anyone out there who can help me, I would be SOOO grateful.
Thanks

Do you remember whether you had gone inside the library bundle and either moved or modified any of the files stored in that event?
I suggest starting with the ;library backups folder. The FCP X version on 3/2104 was using the current Library model and so you should have library backups that were created automatically when you first worked on your project. The default location is in Movies/Final Cut Backups, Double-click any of them to see whether the project will load correctly.
Russ

Is there any way to use copy from function in cProject Project creation.

Hi,
Kinldy suggest if any one have idea to use copy from function in cProject while creating Project in cProject.
We have copy from function in our material creation and BOM, Is there any way to copy the old project and we can take the same for new project as a Paste entire structure.
Please share with me if you have any ideas for the same.
Thanls in advance for your help.
Thanks & Regards.
Raj

Hi,
please see
[http://help.sap.com/saphelp_ppm50/helpdata/en/4a/6431a343946ba2e10000000a421937/frameset.htm|http://help.sap.com/saphelp_ppm50/helpdata/en/4a/6431a343946ba2e10000000a421937/frameset.htm]
there the third case ("Based on an operational project ...")
Kind regards,
Florian

Is there any way to use two video resolutions in one project in Pre10?

i looked up this question but didn't find what i was looking for. Pre10 on XP or on Win 7 64 bit( i have Pre 10 on two machines) both with lots of RAM. XP has a dual core processor and Win 7 64 has a quad core.
I shot a concert video with a Sony HDR-XR160 (1920 x1080 16:9) on tripod in back of room for my main camera and used a Panasonic Mini-DV as my roving camera (640x480). i am using the HD on video/audio 1 in timeline and want to use the Mini-DV on v/a 2... but when i cut to the mini-dv footage it plays fine but I see the edges of the HD footage on both sides.... is there any way to make this work??
can i resize the mini-dv footage or will that look weird? should i make a new project and make it 640x480 and what would that do to the HD footage? I thought that the 640x480 footage would look cool as cutaways as it's different res.
(I have another question. in Pre3 i could click on a video track and hold the alt key and use the arrow keys to shift the video track right or left by a frame at a time and that doesn't seem to work in Pre10 I have a matrix audio track to sync with the video. do you want me to start another thread for this question?)
thanks

If the SD material is not filling the Frame, which will happen in an HD Project, you will then need to Scale the SD footage to fit. This is what Steve was warning about, as the Scaling will degrade the SD material. One possible option would be to use a program, like Red Giant's Magic Bullet Instant HD, to do the Scaling. While still less quality, than having shot HD to begin with, many users find it pretty good for the up-rezzing.
Good luck,
Hunt

Project Web App (PWA)/Sharepoint 2013: is there any way to display two different views of the Project Center PWA web part to the same user in a site collection?

i want some of my users to see all the projects in the Project Center at my top-level site, and those same users to see only the projects they own at a subsite level in Project Center. that way they could see an 'all project' view on the homepage and only
their projects on their dashboard pages (which also have an instance of Project Center web part on them). i have searched and searched but cannot find a solution to this. is there any way to acheive this functionality? thanks in advance for your assistance!

I have tried this in the past, but was not successful, as far as I can recall. Once you access the project center webpart in one page, the view will be retained regardless where you see it again. (until you apply a different view or clear your browser cache).
May be an easier solution is to display a 'report' on the home page with ALL projects (much easier to do), and use the Project Center webpart for the My projects view as it is easier to achieve via Project Server Security, than a report.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

Is there any way to edit all the transitions in a project at the same time?

I chose "insert with transition" when adding clips to my timeline, but the default is set for one second, which is longer than I'd like. I know how to change the duration of each transition one at a time, but is there any way to select all the transitions (there's about 90 of them) and adjust the duration for all of them at the same time?
That's my main question, but I also would like to change the default cross-dissolve transition to be 15 frames instead of 30 for future projects. Anybody know if I can do that? I know I can create a 15 frame cross-dissolve and make it a "favorite", but it seems it would just be easier to change the default one instead.
Thanks,
Stephanie

I know I can create a 15 frame cross-dissolve and make it a "favorite", but it >seems it would just be easier to change the default one instead.
That's your only choice using FCE.
Al

Any Way to down load of SAP Employee Lookup project code

Similar Messages

Maybe you are looking for