Any way to expand the text fields in the properties menu?

Don't see that they made this bar adjustable and they gave critical field boxes like links, alt and SRC a very short set of visible characters and so entering things like long links and image names is not easy. Thought this was a Mac conversion thing, but I also know it's this way on PC.
TIA

primarily use the Inspector to change/add links and to change alt text, etc. I like editing the properties in one place.
Same here. I always use the Property Inspector (PI) for those things. Always have. That's what it's there for.
Once again, it doesn't bother you that the field boxes only show about 10 characters, so that anything else you type or paste in has to be scrolled to make sure you input the link correctly? Sounds like afterthought to me - you can't possible read even the shortest URL.
I never type in those fields.
I paste, or use Browse to File or Point to File.
They're always filled out correctly that way.
I find the tooltip another step to take. I come from GoLive, where all this was so clear and easy, plus the fact that it could autofill the http://, saving even more time.
The tooltip is just a quick and easy cross-check - not a step as such.
I rarely use http:// links in the PI. Usually site root relative or doc relative.

Similar Messages

When I add a new bookmark, and the (star) Page Bookmarked window appears - is there any way to expand the size of that window so that I can see my entire list of folders when adding a new bookmark to an existing folder?

When I add a new bookmark, and the (star) Page Bookmarked window appears - is there any way to expand the size of that window so that I can see my entire list of folders when adding a new bookmark to an existing folder? The endless scrolling technique is far too tedious when trying to add a new bookmark, because the window is simply too tiny. Is there maybe a plug-in that will let me grab the corner of that window and re-size it? Thanks!

I suggest you install the "Add Bookmark to Here2" extension, then you can expand the the list but you will not see the bookmark itself in the list if that is what you wanted. At the top you have three major folders you can select one of them and scroll up and down. Below that you have your most recently used folders and you can select one of them instead and scroll up and down. You can see the folder the bookmark is in -- they get added to the bottom
If you really want to see the bookmark within the folder the same extension allows you to bring the bookmark to the folder from say the bookmarks sidebar that is why it is named as such. I use it but mainly i use the dialog.
Please continue reading about bookmarks and some related extensions at
* http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox
* https://addons.mozilla.org/firefox/addon/add-bookmark-here-2/
* http://dmcritchie.mvps.org/firefox/firefox.htm#addbookmarkhere2
* http://dmcritchie.mvps.org/firefox/kws.htm
If you are not using tags at all, you can remove a whole lot of confusion by removing them from the dialog via the extension.

Is there any way to expand the gigage of my iPhone 3gs.

I have 8 gigs and keep running out of space, Its all i could afford at the time. I need more room!

No.
You cannot add memory.
Sorry.

Is there a way to expand the text area of the login/lock screen for the warning message?

I put our company's standard warning message in the Security & Privacy system preference ("Show a message when the screen is locked.") and it overflowed the allotted text area for the warning message text on the login screen and lock screens. It seems that the area allows about 250 character messages and I need to provide about 500 characters. Is there any way to expand the text area allotted for this purpose?
Bob Reed

To be a little more specific about the challenge I'm facing, I want to increase the allotted text space for the field I've outlined in the attached image. Seems like there ought to be a NIB file that could be edited to accomplish this task:
I would appreciate any advice on which file should be edited to expand the text field.
Bob Reed

Is there any way to print the data inside the Notes field of MIR6 Report

Hello Gurús.
We need to include the data inside the Notes field in the report MIR6 - INVOICE OVERVIEW - report.
Is there any way to print the data inside (comments) the Notes field as well in the Report ?
We found that the only way is to open the Notes and print it, but it takes time, any idea ?
Rgds.
MCM.

There's nothing built-in that does that. If you only have text fields and they don't have any formatting or other property that would prevent it (e.g., Date, character limit), you can run a simple script to populate each field with the field name, and then print. A more complicated approach would be a script that adds text annotations near/over each field that shows the field name. This would just be for documentation purposes, but it's possible. Post again if you'd like help with the first. You'll probably have to pay someone for the second approach if you don't want to do it yourself.

Is there any way to change the default font for outgoing text-messages, in "Messages"? (OSX 10.10)

Is there any way to change the default font for outgoing text-messages, in "Messages"?
I can change it for one conversation, but then it resets to the default, tiny font.
The preferences menu only lets me change the conversation font.
(OSX 10.10)

Hi,
As you may remember there used to be a Messages pane to the Preferences where the Font and colour of the Balloons or background and the Font text colour could be changed.
And there was a Format Menu for character, word and Sentence changes in the current IM or iMessage.
Those have gone in Yosemite's version of Messages (Despite it retaining the designation of Messages 8 the same as Mavericks' version).
All that can be done now is set the size of the font and this has been moved to the General Section of the Preferences.
The Yosemite version has also been fixed to using the Balloons style of send and receiving any type of messages as well.
Changing the Font would involved editing the Balloon.transcript file.
10:34 pm Saturday; December 13, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Is there any way to change the font size of the text in the Finder Sidebar?

This may sound like a bit of a dorky question but here goes nothing...
I am rather near-sighted and in need of new glasses but I am stuck in a holding pattern until I can get a referral to see my eye doctor. Anyway... I have found myself using the Zoom features far more often and increasing the font size in the Finder for the Item Names & Info.
The problem that I am facing now, is that the font size of the text in the sidebar is FAR SMALLER than the font size of the text of the actual file names & info.
+*IS THERE ANY WAY TO INCREASE THE FONT SIZE OF THE TEXT IN THE SIDEBAR??*+
So far I have looked in:
*The Finder Preferences
*The Desktop Preference Pane
*The Appearance Preference Pane
*The Seeing Tab of the Universal Access Preference Pane
And to add to my frustration I have also searched the Mac OS X Help AND all of the posts in this thread (back to 1/1/09) that had the word "sidebar" mentioned in them!!
+*DOES ANYBODY HAVE ANY OTHER IDEAS?? OR IS THIS ONE AREA THAT I AM OUT OF LUCK BECAUSE APPLE DIDN'T FORESEE THIS ISSUE??*+
Usually, Apple is really very good about foreseeing any possible trouble (ESPECIALLY when it comes to the area of Accessibility for people w/ disabilities!!)
I do hope that SOMEBODY can help me on this one!!
Also, I noticed that the size of the text that is on the Toolbar is also the same ITSY BITSY font size as the text on the sidebar, but I am guessing that there is next to nothing that can be done about that!!
Thanks a Million!!
+~Kathryn A.+
P.S. Here is the link to a screenshot that I took that will illustrate my problem more clearly...
Icon View Screenshot: http://screencast.com/t/gzDONwN3

Hi! The only way I know of is changing the screen resolution. Tom

Is there any way to expand both the OSX and Bootcamp partitions after imaging the drive to a larger HDD?

Hey all. I have been searching forums and racking my brain to find a way to fix an issue I am having with my Late 2011 13" MBP. SInce I wasn't able to find an answer, I figured it was time for reach out to the community.
I purchased a Late 2011 13" Core i5 MBP that had a bad HDD from a friend. I replaced the HDD with an old 100GB SATA drive I had lying around. My mistake was thinking that it was a 1TB drive. Regardless, I was able to reinstall Lion to the new HDD and get the machine up and running. Once that was working, I went ahead and upgraded to Mountain Lion with no issues, then I unstalled Boot Camp and Windows 8. Everything installed without a hitch and was working great. Right about that time I realized that I had almost no free hard drive space and discovered my error (the 100GB HDD).
I pulled the HDD and put in in my ASUS G74SX laptop along with a Seagate 750GB Hybrid Drive and used Clonezilla to do a hardware-to-hardware clone of the drive. When it was completed, I put the 750GB Hybrid drive in the MBP and it booted right up with no problems. I was also able to switch back and forth from my Boot Camp drive and everything appears to be working as it should.
The only problem I have is that both the OSX partition and the Boot Camp partition are still the same size as they were before I cloned the drive. Try as I might, I can't find any way to expand either one to use the additional 650GB of space that is sitting on the drive unused. Disk Utility won't allow me to expand the partitions unless the free space is contiguous with the drives.
Does anyone know of a utility that I can use to fix my problem? I really don't want to reload everything from scratch.
Thanks,
Scott

You need to combine the libraries on one computer. Otherwise you'll be constantly erasing your iTunes content as you switch computers. iPhone will only sync or manually manage iTunes content with ONE computer at a time.

Is there any way to prevent the copying of text from Presenter's Notes tab?

PowerPoint Notes Page text exposed on a Presenter Notes tab can be selected and copied from the Notes tab and then pasted into any text document. Is there any way to prevent the copying of text short of not providing notes text at all?

Hi Robingo,
Excel is strictly treated as a data source and Siena only imports the data in your tables, not the formatting.
If there is some business logic behind the formatting, you could mimic the same logic in Siena. For example, the font is bold or red if a value is in a certain range, the font is in italics if the data is for a specific customer, etc.
Thanks
Robin

Is there any way to keep the flash from going off when you receive a text or other notification?

I have an iphone 4s. Is there any way to keep the flash from going off when you receive a text or other notification? I keep it next to my bed at night and keep thinking there is lightning when something comes thru. LOL

Go to Settings>General>Accessibility and turn LED Flas for Alerts to Off.

Any way to validate the Mandatory field in the XML file

Hi,
Is there any way to validate the Mandatory field in the XML file. I created an xml type table xml_validate based on the schema and insert the XML files with statement.
INSERT INTO xml_validate(warehouse_id,xml_file_name,warehouse_spec)
Values (agreementid,p_filename,XMLTYPE.createXML(l_clob));
It is validating the data types, extra tags etc but not validating the missing of the manadatory tag/value.
Thanks in advance
Rizly

Hi Ants,
Yes, I was not doing the strict validation, after searching the forum i understood that was the reason. So i did this way,
begin
for x in (select myColumn from myTable where WAREHOUSE_ID=41) loop
x.myColumn .schemaValidate();
end loop;
end;
The out put is:
ORA-31154: invalid XML document
ORA-19202: Error occurred in XML processing
LSX-00011: internal error: LsxvPushCandidate array overflow
ORA-06512: at "SYS.XMLTYPE", line 345
ORA-06512: at line 3
My i know more information about this error, especially
LSX-00011: internal error: LsxvPushCandidate array overflow
Thanks in advance
Rizly

The data fields in a filled-out PDF form disappeared after a crash. Is there any way to restore the lost entries?

Adobe Reader crashed while I had a filled-out Adobe PDF form open. When I reopened the file, I found that all of the data that had been entered into the form fields had disappeared. Is there any way to restore the data that is missing?
I note that the "Restore" command in the Adobe Reader file menu is not available (grayed out).
Thanks for your time.

Hi a2jc4life,
maybe you can restore your deleted profile with this tool
http://www.chip.de/downloads/FileRestorePlus_29645008.html

Bcc: Is there any way to change the "undisclosed recipients" text ?

Bcc: Is there any way to change the "undisclosed recipients" text appearing on the message at destination when I used Bcc?...
Eudora offers the possibility to choose the text that appears when using Bcc.
Does Mail do the same?...
If yes, how?...
Thanks
sergio

Every message that I send with addresses ONLY in Bcc:, when is received by others, or when I receive it back from some yahoo group, has the reading: "undisclosed recipients"...which I can see either when I receive an answer from some individual or when I receive the messages from the group.
Of course, if I write any address in the "To:" space, what comes out is the address I type.
My question was something else: HOW to CHANGE what comes out.
In Eudora it is possible to have ANYTHING one wishes appearing INSTEAD of the "undisclosed recipients", it's enough to type a code inside the message once, and choose the text one wishes to appear.

I hate white text on black background - is there any way to change the look of pse9?

I hate white text on black background - is there any way to change the look of pse9?

I agree and very disappointed with the look of this Photoshop elements 9 screen

Any way to stretch the height of text?

Hi
Is there any way to stretch the height of text? I tried the distort tool, didn't seem to work.
best
elmer lang

elmerlang wrote:
…didn't seem to work. ..
"'Doesn't work' is no error description!" .... SCNR !!!
works like charm here:
Title selected
Distortion Tool selected
streeeeetched ...

Any way to expand the text fields in the properties menu?

Similar Messages

Maybe you are looking for