Any way to "Get CD Track Names" automatically when you insert a CD?

I have the latest iTunes version installed as of today... my first install on a Dell I6000. When I insert a CD and select the Get Tracks option from Advanced, it works fine and import of all songs is no problem. Before reinstalling Windows (and reformating my drive) I had iTunes installed and it would automatically open and get tracks when I inserted a CD. Or, if I manually turned on iTunes and a new CD was in the drive, it would get the tracks automatically. But, now I have to manually select this option. Any way to make it automatic?

Your Dell should work the same as your Mac when inseting a CD. Mine does. Occasionally, it will hesitate in contacting the CDDB, but one round of 'Advanced==>Get CD track Names' seems to jumpstart the process.
I do not have 'iTunes' as an option in the autoplay tab. I have the CD drive set to 'No Action' on CD insert. iTunes seems to autodetect that there is a new CD inserted, while the PC in general does not (just what I want),
There used to be a checkbox within the older iTunes Preferences that allowed it to 'Automatically connect to the Internet when needed'. If you are running an earlier version of iTunes, this may be the issue. The feature is no longer available in v6. Not sure if it was there in v5.
If you are not running iTUnes v6, then search your Preferences for this checkbox. Other than that, I am at a loss as to why your autoconnect to the CDB is not functioning.

Similar Messages

Is there any way to get the canvases names on the form

i have a form in Orcle 6i
i want when the form load i get the names of the Canvases on the Form automatically
to change their visual attribute
is there any way to get the name of the canvases on the form automatically
Thanks in advance

The amount of time to evaluate each item in a Form is a lot less than you think. You are dealing with milliseconds. Worse case scenario, you might add 1 second to your form load time.
I think Francois's suggestion is the best solution, but if this is still too much time, you might concider creating strategic When-New-Item-Instance triggers on an item in each of your canvases that would perform what you want to do.
This will most likely cause problems of its own, but it is an alternative.
Food to get the thought process flowing... :-)
Craig...

Is there any way to disable the firefox search option when you long press the home button on Samsung Galaxy S5 Active?

I have an S5 Active and sometimes the home button sticks and registers as a long press which brings up Firefox search instead of going to the home screen. Is there any way to disable Firefox Search so that this doesn't happen. I Love the Firefox browser but if this keeps happening I will have to uninstall it.

hello djpianalto, you could clear the default settings for firefox on android within the system settings (like described in this [http://www.howtogeek.com/195885/how-to-set-and-clear-a-default-app-on-an-android-device/ external article]).
or try an app like https://play.google.com/store/apps/details?id=hk.sld.SwipeLaunchDisabler

Any way to get around laser flashing black when moving?

I am authoring a project that has a flash animation that I converted to an mpeg2 that starts playing right after you put the dvd in. After the 3 second animation that also includes audio it goes to my main menu. I have the end jump on the animation set to go to the menu. Everything works right , as it should, except for the fact that when it goes from the animation to the menu you see a quick flash of black. I have been told that this is the laser moving over to another asset. It would not be that big of a deal except that the animation dissolves to white and the menu that comes right after it is white, so the black frame really jumps out at you. Is there a work around for this? Thanks in advance for any information that you can provide.

This flash is indeed caused as the laser moves to the next element in the project, but different players will show different degrees of severity... some may not show it at all.
The way round it is to set the Flash animation into a longer sequence using FCP or some other editor, such that when the menu graphic appears it holds for at least 30 seconds (or longer).
You would also create an overlay file for the button highlihgt information.
Set the animation and menu background into a menu and look in the property inspector for the loop point control. Move it to the point where the still menu begins and add the overlay file. From then on you treat it like a static menu and drag out the button rectangles and set the button targets.
This then is a basic motion menu, and there is more information about using these in the DVDSP manual.

Any way to get app available for sale when iTunes Connect is down?

I have an app that was reviewed and approved yesterday and didn't make it out of "Processing for App Store" before today's iTunes Connect outage. Normally I could wait for this outage to pass but this app is for an event this weekend where 50k+ people will be visiting and it starts on Thursday. Is there anway I can get this made ready for sale without iTunes Connect?

Never plan an event that relies on an app being in the store, much less approved.
Apple does on occasion respond to requests for expedited reviews, but if the backend, which is part of the process, is unavailable, there isn't much you can do but reschedule and wait for approval.

Is there a way to bring the schema names forward when you deploy a mapping?

Hi all,
I am working in a database instance where there are objects in multiple schemas needed for a single mapping. Currently I have to create a grant statement and then create a synonym to get the deployed package to compile and run. Is there an option I can turn on where instead of it just bringing forward "<Table_name>" that it will generate "<Schema_name>"."<Table_name>"?
This would remove the need for creating all of the synonyms I currently have to create.
Any help would be appreciated.
Thanks,
Shaun

So you need a different location for each schema, the 'masteruser' that can access all the schemas is used for authentication as below (so MASTERUSER has access to SCOTT and HR), see how MASTERUSER is provided for the user name and the specific schema (HR or SCOTT) provided for the schema:
!http://blogs.oracle.com/warehousebuilder/schema_mapping_example1.JPG!
Then when code is generated the schema is added to the table references:
!http://blogs.oracle.com/warehousebuilder/schema_mapping_example2.JPG!
Cheers
David

HT4236 so, i bought the iphone 5s..but i took a few photos with it 1st before syncing it to the computer and restoring backup of the contents of my old iphone.now, the new iphone's photos are lost.is there any way to get it back?

so, i bought the iphone 5s..but i took a few photos with it 1st before syncing it to the computer and restoring backup of the contents of my old iphone.now, the new iphone's photos are lost.is there any way to get it back?

No. When you restored the backup of the old computer it wiped out everything on the phone.

Any way to recall unsaved tracks?

I was in a hurry after recording some guitar tracks and when I closed the application I stupidly hit the 'Dont Save' option....any way to get those tracks back?

Unfortunately no.

HT4993 I lost all my notes in my iphone 5s and so i went to my ipad and pulled the notes up and seen them for a Sec then they were gone. Please is there any way to get my notes back.

lost all my notes in my iphone 5s and so i went to my ipad and pulled the notes up and seen them for a Sec then they were gone. Please is there any way to get my notes back?

Do you have a back up?
If not you're into using file recovery software like File Salvage - you can download a free trial and it will scan the disk for you and tell you with might be recoverable. Actual recovery will require that you purchase the app. There may be many files with the same or similar names. Always recover the largest file size.
There are other such apps. Search on Macupdate or the App Store

While deleting an album, I hit select all, instead of deleting just that album the entire genre was deleted. I was able to get back all the purchased songs , but none of the cds that were in my collection. Any way to get those songs back?

While deleting an album, I hit select all, instead of deleting just that album the entire genre was deleted. I was able to get back all the purchased songs , but none of the cds that were in my collection. Any way to get those songs back?

Assume you were in itunes? Also assuming windows? Two paths I can think of.....
1) Normally anything deleted from itunes goes to recycle bin. If you did not pick remove from computer probably still in itunes music directory. Just add back. Note to speed things up you can use add directory.
2) Use restore previous version of music directory. To be safe I'd back up current directory, do a restore, then swap back original directory and use restored directory off line.
I do not know of nice solution, I like to hack my way through.

I lost my music when I tried to authorize my iPod for my new MacBook Pro. Is there any way to get it back?

I was able to get a MacBook Pro for college this year and I tried to transfer my music from my iPod Nano to my laptop. Everything was going smoothy until I had to autherize my laptop for the music. To do this I had to enter my Apple ID and password. I must have typed it in wrng because it asked me if I had forgotten my password. I hit the cancel button thinking I could just try again without having to go through the hassle of making a new password but instead al my music disappeared!
Is there any way to get my music back?
Thank you, MHettich

Copy everything from your old computer or your backup copy of your old computer to your new one.

Is there any way to get a Smart PlayList to sort automatically

I have a smart playlist that consists of Podcasts by certain Authors. I'd like to have it sorted by release date, so I listen to them in order, oldest first. Is there any way to get the smart playlist to sort that way automatically? Right now i can't really figure out how it is sorted, it seems somewhat random to me.
Thank you. Tom
Windows XP

yes, and it is actually quite easy. just make a smart playlist that is like this:
First Field: Podcast is true
Second Field: Name Contains (something present in the names of all of the podcasts you want)
There will be a check box next to "Limit to...". check the box, and set the number absurdly high, and then change "selected by random" to selected by most recently added. create the playlist. after it is created, right click on the name, date, time, album, genre... bar, and select "Date Modified" once it is there, click on it and it will allow you to arrange them either ascending, or descending. that should do it.

Federal court website gives a .pl document which opens as garbage until we manually change it to .pdf, is there any way to get Firefox to do this automatically?

I am using a Mac. When downloading a document from the federal court website using Firefox, we get a .pl document which opens as garbage (in TextEdit) until we manually change it to .pdf, which causes it to open just fine (in Preview). It used to work fine, giving a .pdf document every time, but apparently upgrades to Firefox have removed this functionality. As far as I can tell my computer, an iMac running Mac system OS X 10.10.1, does not recognize the .pl format. Is there any way to get Firefox to automatically convert a downloaded file from .pl format to .pdf format? My friend tells me that Google Chrome downloads these documents with no problem. I would prefer to stick with Firefox but I might have to change if every downloaded document is in an unreadable format.
This is a typical example of what I get when I try to open a .pl document (the pdf version is a one page document using plain English):
=====
%PDF-1.5
%‚„œ”
2 0 obj
<</Length1 15628/Length 10121/Filter/FlateDecode>>stream
xúÌ{i`U∂9∑™∫;kWoYÈtuöK“ÑR@“ F!,Å$ñêÑÑd Çä††¢≤)
¢Ääƒet\FeûNà£Œ∆y3"ÈÔ‹Í|Ûæ˜˝˙˛LUNü{œ›Œ=€=∑i

HI jlawrence1,
Is it possible to associated the pl file mimetype with an application? [[Applications panel - Set how Firefox handles different types of files]]

Is there any way to get rid of this stupid feature in iTunes for Windows? You've subscribed to a podcast but have more than five unplayed episodes. iTunes will stop automatically downloading newer episodes.

s there any way to get rid of this stupid feature in iTunes for Windows?
You've subscribed to a podcast but have more than five unplayed episodes. iTunes will stop automatically downloading newer episodes. You may get the following message:
iTunes has stopped updating this podcast because you have not listened to any episodes recently. Would you like to resume updating this podcast?
You can click Yes to continue downloading additional episodes. Or you can just listen to any part of any episode and a new episode will download at the next update.

I believe that feature was added in order to reduce wasted costs to the Podcaster.
Podcasts incur costs - that have to be paid for, by someone. That cost will be the cost of hosting the Podcast on a server somewhere and more crucially (with regard to your point), the cost of the Podcast being downloaded to your computer. Every download costs the Podcaster money (typically, charged by bytes downloaded).
If that Podcaster pays for the whole thing personally, obviously they want to keep down any unnecessary cost to themselves. If the Podcaster is earning money for his or her Podcast (typically from advertising within the programme) then obviously, the advertiser only wants to pay for advertisements heard by listeners. So a download, not heard by the downloader, is waste of the Podcaster's money or no payment from the advertiser.
My own experience is that I only have to resume downloading once per programme. I'm usually several episodes behind on two different Podcasts that I follow, but I do not recall having to repeat the resume Podcast after that first time.

I have lost my ipad when i switched to "finding lost ipad app" to track its location it says that ipad is offline ... i want to know that is there any way to get know when it is online? Please reply me i need help

I have lost my ipad when i switched to "finding lost ipad app" to track its location it says that ipad is offline ... i want to know that is there any way to get know when it is online? Please reply me i need help

Hi nikevans04,
I am sorry to hear that you lost your iPad Air 2. You will only see the last location if it has been off for less than 24 hours. Anything longer than that, it will not show up using the Find My feature. Take a look at the article below for more information.
iCloud: Locate your device
https://support.apple.com/kb/PH2698
Take it easy,
-Norm G.

Any way to "Get CD Track Names" automatically when you insert a CD?

Similar Messages

Maybe you are looking for