Any way to get old hard drive with winxp working on new m/b

I have moved from kt3 ultra aru 2100 to 845pe max2 fir 2.53Ghz. Is there any way to get my old hard drive running with all programs installed or do I have to format the drive and reinstall again the programs from beginning (a lot of work). Now when I connect the drive I get windows protection error.
Thanks

The best is a full clean sheet installation. Or you can attempt :
1. Use the CD and select Repair, which is actually reinstallation on the same partition.
2. put back the HDD on KT4 Ultra where it works. Goto Device Manager -> System -> Microsoft ACPI Compliant System. Uninstall it. You'll asked to restart the PC, let it restart but until the POST screen, shut the PC down, don't let it go into Windows. Put the HDD at 845PE.

Similar Messages

Is there any way to remove my hard drive with backup files in it from the exclude these items from backups???

I currently have a MacBook Air and a 1TB external hard drive, and I run my iPhoto Library from the EHD and as well have TM backup my computer to that same HD. The problem I have is that I don't have a backup of that HD which has all my photos and other media, so If the HD takes a crap I can be in big trouble.
So what I did is I purchased a new HD (My Cloud from WD) to back up my EHD. While setting everything up I ran into this
TM included the EHD in the "Exclude these items from backup" list and I can't touch them, and I tried everything. I later found this
The last sentence of #3 states why I can't.... Since the EHD has a backup file in it, it is excluded.
So..... Does anybody have any idea of a way around this? Would I have to restart everything and set it up different? Or just have a better and easier way of doing this?? I'll appreciate any help and suggestions.

What you need, is a dedicated image restauration filter that recognized the regular frequency pattern superimposed onto the prints. You can do this in advanced Image processing packages that let you compute the fourier transform of the image and then suppress or attanuate the frequency bands of the artefact with a band-stop filter.
But neither Aperture nor PhotoShop have this kind of filter. In Aperture and Photoshop you can only soften the effect by blurring and then exporting a smaller version of the image.
The algorithm that your scanner uses is probably the best that can be done, even if the resolution is only 100 dpi.
Do you still have the negatives? Scanning the negatives at a high resolution may give you better results.
Regards
Léonie

Replacing old hard drive with a new one. HP ENVY DV7 7230us laptop

I am trying to replace my old hard drive with a new one. For some reason it won't do it. I want to perform a clean install with the recovery disks. It seems the only way I can do this is to clone the old one with the new. I have attempted several times and wasted a lot of time trying to use my new drive. Is HP preventing me from doing this for some reason? Is there a work around for this?

Do you know anything about this? Now I am having problems installing the original win8 operating system, (purchased the 3 disk set) on the original hard drive, Toshiba 750g.. It installs up to updating updates but hangs at 13%. The reinstall hasn't even finished. Getting very frustrated. Your assistance is very appreciated.

HT4757 Will this software make my Canon Powershot A700 work with os x 10.8.2 and iPhoto 11 v. 9.4.1? Is there any way to get my camera compatible with this computer?

Will this software make my Canon Powershot A700 work with os x 10.8.2 and iPhoto 11 v. 9.4.1? Is there any way to get my camera compatible with this computer?

First Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
If that doesn't help apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

Just upgraded to FF 12 from FF 3.6 and most of my favicons are now dotted line squares. Any way to get the favicons associated with each web site to load?

Just upgraded to FF 12 from FF 3.6 and most of my favicons are now dotted line squares. Any way to get the favicons associated with each web site to load? I've seen some suggested code to add but I'm not web code savvy. Thanx!

The CheckPlaces extension can restore favicons. It is also great for checking bookmarks to ensure that they are still valid.
* https://addons.mozilla.org/en-US/firefox/addon/checkplaces/

Is there any way to get my pics from my iPhone to my new MacBookAir?

Is there any way to get my pics from my iPhone to my new MacBookAir? Sync only works from the MBA to the iphone.

PhotoStream - http://support.apple.com/kb/HT4486
LN

I have replaced my old hard drive with a new SSD drive. Can I restore a complete Time Machine backup

I have replaced my old hard drive on a MacBook Pro midyear 2010 with a new SSD drive. I have a complete system backup of my old drive in an external hard drive using Time Machine.
Questions that I would like to get answered.
1) Can I connect my external hard drive to the macbook pro and use that to boot up my machine by pressing and holding down the Options key? Once booted up successfully, can I use Disk Utility to format the new SSD and then restore the complete time machine backup?
2) If that is not possible, can I use my old drive which I can connect using a USB adapter and use that to boot up by following the same strategy as listed in Step#1 above?
3) If neither options are possible, do I need to use a bootable USB drive for Mavericks OS X to boot up the machine,
I have Mavericks OS X ( 10.9.6) and I do not have a DVD of the OS.
Any help is appreciated.

Let me first document the steps that did not work and then I will document the steps that worked.
1) Replaced the hard drive with SSD.
2) Connected the original hard drive using a USB adapter to the MacBook to make it behave like an external device.
3) Powered on the machine and on hearing the chime pressed Command-R to start in recovery mode.
4) Chose the Disk Utility option to erase and format the SSD. The format chosen was Mac OS Extended Journaled.
5) Once the formatting was done, then clicked on the "Restore" tab in Disk Utility
6) In the Source field, dragged my original hard drive from the left pane and placed it in the field
7) On the destination field, choose the new SSD drive. Clicked on "Restore". Gave me a warning, accepted the warning and the restore was under way.
8) I had 236 GB to restore so took 3.5 hours before it was done.
9) Disconnected the external hard drive ( my original internal HDD), shut down the machine and powered on again.
10) Heard the chime and after that it was a white screen with no Apple logo.
Was visibly upset and started thinking what my next move will be. Then tried these steps
1) Again powered off the machine.
2) Connected my internal HDD once more as an external drive
3) Powered on and on hearing the chime, pressed Command-R as before
4) Once the OS X utilities screen popped up, this time chose Install OS X
5) Erased the contents of SSD once more and reformatted it using Mac OS Extended Journaled.
6) Installed OS X by following the prompts.
7) Once the OS was installed, I was presented with an option on how to transfer data to this new Mac
8) Chose the option to move the data from my original HDD.
9) Took another 3 hours to move the data.
10) Removed the original HDD once the transfer was complete, powered down the machine and started it once more.
11) Booted successfully and all my content is now accessible on the new SSD.
Moral of the story - It is the spirit that counts.

How do I get my Firefox bookmarks off of my old hard drive (now installed on my new computer as the 2nd hard drive) and into my new installation of Firefox on my new computer?

I had a lovely computer, about 8 years old, running Windows XP; the mother board died; the hard drive was fine.
I now have a new computer, running Windows 7, and I have the old hard drive as my 2nd hard drive.
How do I get my old Firefox bookmarks off the old hard drive and into my new Firefox installation?

You can find your current profile using about:support pasted into the location bar then click on "Open Containing folder. That is where you will want to replace your old files into.
Next find your old profile on your old HD, see
:https://support.mozilla.com/questions/886839
With Firefox down replace the profile files you decide to replace.
You might get a better idea of what you are doing or might want from also looking at
* http://kb.mozillazine.org/Profile_folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox

How to move files from old hard drive with SATA dock?

I just upgraded my hard drive and now need to transfer the data from the old hard drive to the new. I was told to use a SATA dock but I am not quite sure how to use one. I thought it best to either find out how to use one or find out if there is a better way rather than going about it on my own. How do I solve this quandry?

Click on edit, and then preferences.
Click on advanced, and click on both
keep my song organised and
copy my songs to my itunes library
Now, from your old hard drive, go to your old itunes folder, and drag each artists folder into itunes. You can do it all at once if you have a few artists, but there have been reports of itunes locking up if too much is being is being imported at once

Replace old Hard Drive with 4TB ones on ix2-dl

I ordered the ix2-dl with two 4TB seagate hard disks (ST4000DM000) which is on the official support list. The hard drive came a couple days later than the ix2-dl. So I tried the ix2-dl with an old 640GB hard drive.
Now ix2-dl seems to like my old 640GB a lot. I could either use it alone or use it with one 4TB drive. It proves that ix2-dl does support the 4TB hard drive. It's just I couldn't use both 4TB together...
When I put two 4TB hard drive in, it ended up with lower light solid blue and upper light flashing red. The LenovoEMC Storage Manager shows the error message "Storage failed and some data loss may have occurred."
The web management screen (http://ix2-dl/manage/restart.html) shows the message "Device Software Restart In Progress. The device is starting up..." It will hang up there forever.
I cleaned the 4TB drive with diskpart in windows 7 before put into ix2-dl. Abd firmware is the latest 4.1.104.31360.
I saw jlamendola get this fixed with factory reset in another thread. But I couldn't really get to the factory reset page in the web management portal... The reset button on the back doesn't help. I even tried to do the factory reset with old 640GB drive and choose shutdown after reset. I could only get there with the old 640GB drive. Then I could switch to 4TB drive. But it still gave me the same error message and red flash light ...

Finally I solved the problem.
I cleaned another 1TB drive by using DISKPART as suggested in manual. I was able to access web management with this drive. Then I choose option of factory reset & Power Off.
After power OFF I replaced 1TB drive with new 3TB (already cleaned) drive. NAS accepted this time. I hope it will run smoothly now onwards. Though problem is solved I still didn't understood why it not worked with my new drive.
Future Improvement :
The software restrction of disabling the management page should be removed, so that in such case user should be able to access management page even if the disk is not present atleast for ix2-dl which has the firmware on device itself & not on hard drive.
Nilesh

Is there any way to get in direct contact with apple about a problem I am having?

When I create text boxes in Preview and then save and close the file, they will be rotated 90 degrees when I reopen the file. This makes them virtually unreadable. It happens with some pdfs but not others. I am sure it must be a bug with preview and would really like to tell Apple about it so they can fix it. I posted this problem a few weeks ago and it seems a lot of people viewed it but I only got one reply (the person said they are not having the same problem).
Is there any way to email apple directly about it? Or a better way to go about this?
Thanks!

If you believe it's a bug and you wish to just let them know about it, use the Feedback page Network 23 provided below. You will not get an answer to any feedback you send.
If you want direct assistance from an Apple support technician, then you will have to call them and pay the support fee unless your system is within the one-year original warranty in which case you could purchase an AppleCare extended warranty plan under which you would get free phone support.
You may also get suggests from people here, at least confirmation that the problem is a bug or a refutation of it being a problem across all 10.7.4 systems. You might also update to 10.7.5, if you haven't already, and see if the problem persists. Try the Combo updater; even though it's not necessary for a .1 incremental update, often use of the Combo updater fixes problems that the incremental update does not.
Regards.

Big ask! Is there any way to get MS Silverlight and NowTV to work with Mavericks and Safari 7?

Now amount of frigging will allow me to run NowTV in any web-browser on Mavericks. I've tried all browsers (latest versions in every instance) without the slightest luck. Even delving into the new Plugins security feature of Safari 7 will not get Silverlight to work properly.
Has anyone found a way to get these things to work?

Have you seen this?
http://community.nowtv.com/t5/PC-Mac-Silverlight/PC-Mac-and-Silverlight-Troubles hooting/m-p/65154#M4839
This made me smile from that page.
We know that sometimes Silverlight can be a little finicky

Any way to get Civilizes proxy behaviour with Safari?

Requiring the web browser to use the system level proxy settings is a little no the barbaric side. does anyone know of a plug in or add on for Safari to allow more useful proxy configuration? or is there an add on for the network control panel to allow smart proxy selection?

I do use firefox already, however there are some of the servers that I have to access that do not work with firefox but do work with Safari. depending on the server I have to keep going in to the network prefs and updating the proxy. it gets old fast

Is there any way to get old email back?!?!?!

This new email setup totally sucks!!! I want my old Email back!!! Is there any way to do this? If not there should be. It should be an option!!!!

As I understand, they are slowly switching everyone over to the new E mail and then the old or Classic view will go bye bye!
I wishthey would keep them both and give everyone a choice!

Is there a way to get full hard drive encryption for the iPad?

This is a requirement before I start a new job and Is urgent as I really don't want to have to purchase a laptop instead of using my iPad.

iPad doesn't have a hard drive it uses flash memory. iOS devices already support hardware encryption of data:
http://support.apple.com/kb/HT4175
And read Page 7 onwards of: http://images.apple.com/ipad/business/docs/iOS_Security_May12.pdf

Any way to get old hard drive with winxp working on new m/b

Similar Messages

Maybe you are looking for