Any way to get split mono tracks in a Multicam Sequence?

I have video from 4 different cameras which I'm trying to sync as a Multicamera clip.
They sync great, but the audio mapping is not how I want it.
All the cameras recorded 2 separate audio channels, but they appear upon import in Premiere as Stereo.
So I did Modify>Audio Channels and set them to 2 Mono. Great.
But when I sync them, the resulting Multicam Source Sequence reverts to showing them all as Stereo tracks.
I tried all the different "Audio Channel Presets" in the "Create Multi-Camera Source Sequence" dialog, to no avail.
I want to be able to access both of the channels from all 4 cameras (i.e., 8 separate channels).
Any ideas?

In other words ... what I get is a sequence with 4 video tracks and 4 STEREO audio tracks.
What I WANT to get is 4 video tracks and EIGHT mono audio tracks

Similar Messages

  • Is there any way of getting split screen function in firefox 4

    Being able to split screen was a very helpful feature in the previous version of firefox, however, it is not available in version 4. Is there any other way of getting this tool?

    Firefox has never had a built-in option to split the screen, such a feature is added by an extension. The only one that I know of that is compatible with Firefox 4 is Split Pannel - https://addons.mozilla.org/firefox/addon/split-pannel

  • I have lost my ipad when i switched to "finding lost ipad app" to track its location it says that ipad is offline ... i want to know that is there any way to get know when it is online? Please reply me i need help

    I have lost my ipad when i switched to "finding lost ipad app" to track its location it says that ipad is offline ... i want to know that is there any way to get know when it is online? Please reply me i need help 

    Hi nikevans04,
    I am sorry to hear that you lost your iPad Air 2. You will only see the last location if it has been off for less than 24 hours. Anything longer than that, it will not show up using the Find My feature. Take a look at the article below for more information. 
    iCloud: Locate your device
    https://support.apple.com/kb/PH2698
    Take it easy,
    -Norm G. 

  • Is there any way to get the files from other computer ?

    Hai all,
    I have 2 computers connected. I know the IP address of other computer. Is there any way to get the files from other computer. (for e.g. I want to get the files from specific folder. In Java netwroking is it possible? (Any programs)
    regards,
    Namanc

    Bro Take it easy.
    Think you need to send a Image file named ("abc.gif")
    now develop a server using ServerSocket and connect it in local IP and any PORT
    For example i think ur server is connected in "localhost" and 9000 port.
    Now make ur server educated using some commands.
    For example:
    FileName: <File Name String>
    [Means new file is sending by connected client]
    FileSize: <File size long or int value>
    [ So that ur server can determind about the total length of sender file]
    DataModeOpen
    [Now your client will send its image data, this command means your client software is sending data]
    fjadlkfjaofaijojfwoeiurfodkjflsajlfksa
    l23j4lj23lkjlasjfoq23j4rokjelfkjasldkf
    2o3j4lk2j3ljslakdjf2l3j4 l23kjlk23k4j
    DataModeClose
    [Means file sending finished]
    Close
    [Means your client connection is closed]
    Now develop a client supporting this command.
    For example(Server):
    String getFileName=null;
    long getFileSize=0;
    public handleCommand(String getCmd) {
        if(getCmd.startsWith("FileName")) {
                String[] splitData=getCmd.split(":");
                this.getFileName=   splitData[1];
                outPutStream.writeBytes("+OK");
        } else if(getCmd.startsWith("FileSize")) {
                String[] splitData=getCmd.split(":");
                this.getFileSize=Long.parseLong(splitData[1]);
                outPutStream.writeBytes("+OK");
        } else if(getCmd.startsWith("DataModeOpen")) {
               //data mode open so receive data
              receiveData();
              outPutStream.writeBytes("+OK");
        } else if(getCmd.startsWith("DataModeClose")) {
              //close client socket
             getClientSocket.close();
    }For client:
    DataInputStream dataIn=null;
    BufferedOutputStream bout=null;
    public sendFile(bytes[] getBytes) {
            //if ok found then do other or show error message
        if(sendCmd("FileName:"+getFileName)) {
            if(sendCmd("FileSize:"+getFileSize)) {
                if(sendCmd("DataModeOpen")) {
                   bout.write(getBytes);
                } else {
                   showError(3);
            } else {
                   showError(2);
       } else {
            showError(1);
    }i think it will help u

  • Any way to get iPhoto'09 to recognise existing Facebook albums?

    Is there any way to get iPhoto '09 to recognise existing Facebook albums?
    It would be nice to have all the previous albums I've uploaded to be listed in iPhoto and all the 100's of people I've already tagged would serve as a nice basis for the iPhoto face detection to learn who my friends are!

    This is an interesting workaround, but misses the spirit of the original post. I don't know a way to get iPhoto '09 to recognize existing FB albums, but I agree that this is a serious problem with iPhoto '09.
    The iPhoto '09 Facebook and Flickr uploaders have one "cool" feature - they automatically sync iPhotos events with FB "albums" or Flickr "sets", so if you make changes to the photos in iPhoto, then those changes are reflected in the photos on FB and Flickr automagically (this has been working for me in FB but not in Flickr). The more I use this the more I think it's more trouble than it is useful and I wish I could turn it off and just use the old exporters without syncing.
    There are problems with the exporters:
    (1) the constant syncing with FB/Flickr can get annoying if you're making several changes, if you have a slow internet connection or slow computer.
    (2) If you don't actually want the changes to be reflected in the FB/Flickr album (i.e. i delete photos out of iPhoto to make room on my disk for more photos and now the photos are deleted out of facebook) can get not as user friendly as the original Facebook and Flickr exporter was easier and more user-friendly.
    (3) syncing is cool for a computer programmer to do, but what if users don't want it all the time? What if I don't want my Facebook albums to be exactly the same as my iPhoto albums, and I don't want to split out all the photos that I don't want on Facebook into separate events in iPhoto? This lack of support for the truly useful & user friendly (if a bit boring) features is a really unfortunate oversight.
    (3a) in the old version: i can quickly and easily choose exactly which photos from which events I want to upload to FB.
    (3b) as the original questioner mentioned: I can choose whether to upload to into a *new or existing album*. Hands down, this was *the single best feature* of the previous uploaders.
    (in Flickr this is of paramount importance since the free Flickr account only allows 3 "sets" - so, since this fancy iPhoto syncing links your events to sets in Flickr, you'd have to create 3 massive Flickr-only events in iPhoto in order to stay within their restrictions. I like to keep my iPhotos events separate, but I'm perfectly happy uploading photos from different events into one of my three Flickr sets. i'm pretty sure i can still do this with FFXporter or similar.)
    (3b) in the old version: all the photos i upload are put into a "pending" album on FB so that I can tag people, delete some photos (without deleting them off my own iPhoto), etc. before sharing them with all my friends. I'd like to have at least the option to choose whether they go into a pending album first or not.
    (3c) it's further annoying that you cannot browse your iPhoto library directly (from most websites) when searching for photos to upload, you have to export the files first, then browse to where the photos were exported.

  • I've lost my iPhone 4... How can I find it when the device is offline when using "find my iPhone app"????? Any way of getting a location from it????

    I've lost my iPhone 4... How can I find it when the device is off linesmen using "find my iPhone app"????? Any way of getting a location from it?????

    No. It must be online in order to locate it.
    What To Do If Your iDevice Is Lost Or Stolen
    iPhone, iPod Touch, and iPad
    If you activated Find My Phone before it was lost or stolen, you can track it only if it is connected to the Internet by Wi-Fi or cellular. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
    If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
    This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
      1. Reporting a lost or stolen Apple product
      2. Find my lost iPod Touch
      3. AT&T. Sprint, and Verizon can block stolen phones/tablets
      4. What-To-Do-When-Iphone-Is-Stolen
      5. iCloud- Use Lost Mode
      6. What to do if your iOS device is lost or stolen
      7. 6 Ways to Track and Recover Your Lost/Stolen iPhone
      8. Find My iPhone
      9. Report Stolen iPad | Stolen Lost Found Online
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
      1. Find My iPhone
      2. Setup your iDevice on iCloud
      3. OS X Lion/Mountain Lion- About Find My Mac
      4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

  • Is there any way to get an ipod to display only complete albums in the albums list?

    is there any way to get an ipod to display only complete albums in the albums list (rather than every album represented by every song on the ipod)?

    Sounds like there is some discrepancies in the tagging in iTunes.  See this page for more information.
    Grouping Tracks Into Albums
    B-rock

  • Is there any way to get the height/width of an image before importing it in the indesign document.

    Hi All,
    I need to obtain an image's attributes such as dimensions (height, width in pixels) without placing image in indesign document.
    I have full path of the image (say abc.jpg is stored at c:\my pic\abc.jpg).
    I have obtained the IDFile for this image, tried getting size using GetFileSize() which correctly return size in bytes.
    Is there any way to get the height/width of image without importing it in the indesign document.
    Please, give me some hints. I have spent quite a lot time digging in CHM. I have searched in FileUtils, IDFile API's but found no method which serves this purpose.
    At this point I am clueless where to search next.
    Any help will be appriciated.
    Just a point to mention, I am able to get image height and width for an image in indesign doc though Its not my requirement.
    Thnx,
    D.

    You might be able to examine the contents of the PlaceGun after calling kImportAndLoadPlaceGunCmdBoss without actually placing the image in a document. Not sure, but would be worth looking at.
    Otherwise you will probably have to write platform specific code, ideally with a generic platform-independant wrapper (see SDKSamples/paneltreeview/PlatformFileSystemIterator).
    For the Mac, look at CGImageGetWidth() etc., not sure what the best option is for windows.
    Perhaps Quicktime could provide you with a platform independant solution.

  • Is there any way to get the appStore link for my application

    Hi everyone , i am developing an app which has a feature of sharing its appstore link with the friends through mail,so that they can see my appplication in appstore and buy it directly on click of a button. For that i need to use the app store link of my application for sending it . is there any way to get that and using it dynamically in my app immediately after releasing it.

    Your best bet would be to create a web page of your own for the app. Design that page so that it uses 'META REFRESH' to redirect the visitor straight to the App Store link.
    That way you can hard-wire your own web page address into your app.
    This has the advantage that it can work well even before you've noticed that your app has arrived on the App Store. Create a real web page, describing the app and telling people to search for it in the App Store by name - then replace it with the auto-redirect page when you've discovered your application's App Store address.

  • HT1386 i am trying to restore a backup og my iphone 4 from itunes on my macbook, it asks me for a password which i do not recall setting up, is there any way of getting this password.

    i am trying to restore a backup og my iphone 4 from itunes on my macbook, it asks me for a password which i do not recall setting up, is there any way of getting this password.

    No there's not.  Otherwise that wouldn't be very secure, would it?

  • I had 41 tabs open in about six groups over the last year and a half and I just close them and exited Firefox. Is there any way to get them back?

    <blockquote>Locking duplicate thread.<br>
    Please continue here: [[/questions/856718]]</blockquote>
    I had 41 tabs open in about six groups over the last year and a half and I just close them and exited Firefox. Is there any way to get them back?
    Also, is there any way to save a group or an open session and then restore it later?

    History menu, if it was destroyed in the last session
    then use "Restore Previous session:" and then restore all windows also from the history menu.
    If done in this session try the restore all windows under the history menu.

  • Federal court website gives a .pl document which opens as garbage until we manually change it to .pdf, is there any way to get Firefox to do this automatically?

    I am using a Mac. When downloading a document from the federal court website using Firefox, we get a .pl document which opens as garbage (in TextEdit) until we manually change it to .pdf, which causes it to open just fine (in Preview). It used to work fine, giving a .pdf document every time, but apparently upgrades to Firefox have removed this functionality. As far as I can tell my computer, an iMac running Mac system OS X 10.10.1, does not recognize the .pl format. Is there any way to get Firefox to automatically convert a downloaded file from .pl format to .pdf format? My friend tells me that Google Chrome downloads these documents with no problem. I would prefer to stick with Firefox but I might have to change if every downloaded document is in an unreadable format.
    This is a typical example of what I get when I try to open a .pl document (the pdf version is a one page document using plain English):
    =====
    %PDF-1.5
    %‚„œ”
    2 0 obj
    <</Length1 15628/Length 10121/Filter/FlateDecode>>stream
    xúÌ{i`U∂9∑™∫;kWoYÈtuöK“ÑR@“ F!,Å$ñêÑÑd Ç䆆¢≤)
    ¢Ääƒet\FeûN࣌∆y3"ÈÔ‹Í|Ûæ˜˝˙˛LUNü{œ›Œ=€=∑i

    HI jlawrence1,
    Is it possible to associated the pl file mimetype with an application? [[Applications panel - Set how Firefox handles different types of files]]

  • Any way to get more than 1000 characters in notes?

    i was just wondering if there was any way to get more than 1000 characters in the notes section of the ipod. i have outlines for school and they are a lot longer than 1000 characters... i didnt know if there is a setting on itunes or the ipod or a hack or mod to make it more than 1000 character limit. thanks for the help

    No.
    You can use the iPod in Disk mode and copy the outlines in their native format (Word?) and put them on your own computer.

  • Is there any way to get my photos FROM my iPod Touch back onto a new hard drive?

    My Mac crashed last Friday. First timeIs there any way to get my photos FROM my iPod Touch back into my new hard drive. The iTunes sync only goes one way from the computer to the iPod.
    It syncs the photos taken with the iPod (really an old iPhone 3G without phone service) but not the folders which I synced from the old hard drive to the iPod over the past year.

    thank you for the tip.
    Yes, my computer was backed up. for reasons way too complicated to go into here, these particular folders were not part of the backup.
    Thanks again for the help.
    jglaiche

  • Itunes deleted my 30 gigs of music and I didn't have it saved in itunes or on computer, is there any way of getting music back?

    Itunes deleted 30 gigs of music from my ipod. And I don't or didn't have it saved in Itunes or on my computer....is there any way of getting my music back? Alot of the music was not purchased from Itunes....mostly from cds I dont have anymore! PLEASE HELP!

    If the lost music is no longer on your iPod, on your PC, or in another backup somewhere, you are out of luck.  You can download most iTunes purchases again at no cost via iCloud.  See this article for more information and assistance.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    For non-iTunes purchased content, you'll need to redownload or rerip them from their original source.
    B-rock

Maybe you are looking for