Any Way To Have Dreamweaver Cut Off Text Past 100%?

Does anyone know if there is a way to make Dreamweaver cut off your text if it is past 100% of the screen size? Thanks.

Deleted, not wrapped.
It's no big deal though.
The thing is I want it right at 100% so it fills up the width of the whole screen. But, it doesn't work right, because people have different size screens for one thing and the other thing, what I want is a straight line across the screen. Like if you were to go to style>underline and then, continually hold down the shift+ctrl+space bar until it got all the way to the end of the screen. However, when I actually preview it in my browser, it is not the whole screen (much shorter). So, then the only option is to make it really long to ensure that it does actually go to 100%, but then I would have to have Dreamweaver cut off/delete any extra text because I don't want a horizontal scroll bar across the screen. And, I don't think DW can do this. Too hard judging the 100% and it would be different on different monitors anyway, so guess I won't be able to do it. It's no big deal though.

Similar Messages

I have an Iphone 4, I have music files that appear on my phone that I want to delete, when I link it to my computer the songs on the phone will not appear in Itunes so I can delete them, Is there any way to delete these song off the phone without going th

I have an Iphone 4, I have music files that appear on my phone that I want to delete, when I link it to my computer the songs on the phone will not appear in Itunes so I can delete them, Is there any way to delete these song off the phone without going through Itunes?

Nope, it either needs to be plugged in or turned on with the power button.
A replacement iPhone 4 is $149, but at least the whole phone is replaced.

I have my TC in my Bedroom, So the light can be bright. Is there any way to turn the light off?

I have my TC in my Bedroom, So the light can be bright. Is there any way to turn the light off?

The light cannot be turned off, but if you stop by at the office supply store and get a sheet of small 1/2" white routnd labels, you can place a few over the light to dim it significantly. Add more labels as needed to adjust for the brightness level you want to achieve.
Of course, you could use a piece of tape, but the white labels look much nicer and won't be noticeable once you get 4-5 feet away from the device.

HT1478 I found my old iPod that I haven't used since about 2010, and I no longer have the computer that the library was synced with. Is there any way to get my music off of it so that I can put it on my new iPod?

I found my old iPod that I haven't used since about 2010, and I no longer have the computer that the library was synced with. Is there any way to get my music off of it so that I can put it on my new iPod? The old one is a 30 GB from 2005.

CS2 is very old and reached its "end of life" a while back. So probably won't run on modern operating systems. If you can still run it, you'll need to uninstall what you have and re-install with the download link below to activate it.
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Nancy O.

Calendar ordering issues (cut-off text)

I have a calendar that I have successfully ordered and received in the recent past.
Two more recent orders for the same calendar have given rise to messages from "print services" that they cannot print the calendar because of cut-off text.
There is no cut off text in the calendar but when I do a print preview I see that each month is cut off (Janu.., Febr ..., etc.) and the year does not appear as it does on the versions I have already received.
Has anyone else encountered this problem? Can anyone from Apple tell me what to do? I don't seem to be able to act on this part of the text.

Christopher:
Try clearing out the iPhoto cache folder inside your User/Library/Caches folder. See if that will help.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Is there any way to have Mail automatically use our default "Sent" folder?

We are a small college, with a fair number of users who use Macs and iOS devices, and we run an IMAP mail server. By default, our accounts are configured with Sent, Trash, Drafts, and Junk folders. Apple's Mail.app insists on "Sent Messages" and "Deleted Messages" rather than "Sent" and "Trash".
We instruct our users to use the menu command Mailbox > Use This Mailbox For > commands to select our server's folders on their desktops, and on iOS to use the Settings > Mail > Account > Advanced, but this is tedious and annoying. Most users get it about half right, so that some devices use our default "Sent", and some use "Sent Messages". (This happens with Trash as well, but most users are not concerned if their Trash differs device to device.)
Is there any server setting that can hint to Mail.app that it should use "Sent" rather than "Sent Messages"?
Apple has a support document about this issue, "Mountain Lion Mail: If messages aren't stored where expected on the server" ( http://support.apple.com/kb/PH11810 ).
However, that doc (and the similar one for Snow Leopard) merely says, "When Mail stores messages on the server, it looks for specific mailboxes, by name, in which to put the messages. If Mail doesn’t find those mailboxes on the server, it tries to create them on the server or, failing that, on your Mac."
The document does not specify what the "specific mailboxes" are, and certainly does not suggest that there is any way to have it cooperate better with our server, but perhaps there is a way?
(If I was trying to be a good IMAP client, I might look for any of "Sent", "Sent Messages", or "Sent Items", and use what I found before going to the next step of creating my own folder. Hard to imagine that any IMAP account would be initially configured without some "Sent" folder, so why not try to discover what the user has before pig-headly making your own.)

Unfortunately, I have not found a consise way to explain this to the general user, just a huge wall of text to work around something that Apple got wrong the first time they created an IMAP client, and has stubbornly persited with. Here's our documentation for this silly problem:
Special Folders on IMAP
The basic idea is that all IMAP mail programs keep all your mail on our server, so that, e.g. when you read or reply to a message, all of your devices can then show that message as read and replied to.
By convention, each IMAP program treats a few folders on the server as "Special", such as a "Trash" folder, that deleted messages get moved to, and a "Sent" folder, where each message you send gets copied. When they all pick the same special folders, all of your devices will show the same view of your mail. However, if different devices use different server folders for their "special" Sent folder, then the mail from these two devices will wind up in two different places, and be harder to find.
Unfortunately, Apple's Mail programs are particularly obscure and obtuse in the way they treat these folders: They show their special Sent and Trash folders on screen with the obvious names "Sent" and "Trash", but secretly, under the covers, they insist on using folders named, "Sent Messages" and "Deleted Messages" instead. Even if the server already has perfectly usable "Sent" and "Trash" folders, Apple clients will ignore them and create their own special case "special" folders.
If you only ever use Apple devices to look at your IMAP mail, you might never even notice their deception. But, if you sometimes use another mail client, such as webmail, you will encounter the confusing truth: When we created your account for the very first time, we add a "Sent" folder (actually named "Sent") and a Trash folder, named "Trash", and this is what everything except Apple's mail will use by default, because those folders are already their the first time the client connects to your account. However, even though Apple shows your special sent folder at the top of the list, with a paper-airplane icon, and labels it "Sent", in fact they ignore the existing "Sent" folder and make and use their own "Sent Messages."
SO, if you send some mail from webmail, it will be in your actual "Sent" folder, whereas if you send it from an Apple mail program, it will be put into your "Sent Messages" folder. If you look into either "Sent" special folder, you'll only find part of your previously sent mail.
Similarly for Trash, though most users find it more problematic to have two different Sent collections than to have multiple trash buckets.
To unify things, you can either set your non-Apple mail programs to use "Sent Messages" and "Deleted Items"; OR, you can set all of your Apple devices to use "Sent" and "Trash". Doesn't really matter which way you go, though if a majority of your devices are doing it a particular way, you should change the non-matching devices to agree with the majority.
(All clear so far? Why did Apple make this so hard? It would have been utterly simple for them to check for an existing "Sent" folder, and to use one if there is one, rather than to always stubbornly create and use a new "Sent Messages" folder. Then, they add to the problem by pretending that their new "Sent Messages" folder is really just named "Sent". Stupidity all the way down.)
Anyways, to find out what the majority of your devices are doing, check them each to see which of the "sent" folders shows up in the "normal" list of folders rather than in the "special" location, that is, what folder name is in the list at the bottom of the folder area, rather than up at the special "Sent" icon, (because the special one will always be labeled "Sent", not matter what the actual folder name is).
For example, say that on all-but-one of your mail setups, you see a "Sent Messages" folder down in the normal list, and on the other device, you see "Sent" down in the normal list.
In that case, you'd want to set the "different" device to make the folder named "Sent" be the special one, instead of the "Sent Messages" that it was currently using.
Conversely, if all but one showed "Sent" down in the regular folder area, and only one showed "Sent Messages", then you'd want to make "Sent Messages" the special folder on the odd device.
Once you have decided, see the specific sections below for the procedure to set the "special" folders for Apple's Mail.app on a Mac, Apple's Mail on an iPhone/Pad/Pod, or for RoundCube webmail, or for Thunderbird.
Once you have every device using the same sent folder, then you can move any messages from the "extra" version of the folder into your special folder, and then you can delete the extra folder. (If you delete this extra folder and it later re-appears, then it means one of your mail programs is still using it as its "special" folder, and recreating it.)
Similarly for Trash, though probably you could delete the extra trash folder without moving the files, because they are trash.
Here are the details for changing the Special Mail Folders on the systems we use:
A) iPhone, iPad, iPod:
As a first step, use Settings > Mail to set your device to read your email account, then open the Mail program so that it will read the list of all of your folders from the mail server. After that, go back to Settings > Mail to make sure it is using the desired special mailboxes on the server.
Select your IMAP account in the settings tool, and then press the button for "Advanced" settings, and find the list of special mailboxes, e.g. Sent, Trash, Drafts. For each, scroll through the list of folders on the server to choose the folder you wish to use for that function.
Note: iPhones/Pads/Pods also can be set to keep sent mail locally on the device. This is a spectacularly stupid choice for normal IMAP, as none of your other devices will be able to see the messages you send from your phone.
B) Mail.app on Mac desktops and laptops:
Set up mail so that it reads your messages and folders from the mail server.
Select the "Sent" folder that you wish to use in the list of folders at the lower left of the mail window. (On newer Macs, the folders may be hidden by default. Use the "View > Show Folder List" menu command to display them if necessary.)
Use the menu command "Mailbox > Use This Mailbox For > Sent" to specify that the selected mail box is the special folder for sent mail, and similarly for your Trash, Junk, or Drafts folders.
C) RoundCube Webmail (with the standard skin):
Login to your webmail site , and select the "Settings" icon in the upper right of the window, which has a "Gear" icon. This will display a "Settings" panel with buttons for "Preferences", "Folders", and "Identities" settings. When you first open the Settings panel, the "Section" panel shows a row of buttons for different Preferences.
Click "Special Folders" in the "Section" list to open a list of "Drafts", "Sent", "Junk", and "Trash". Each special folder is followed by a menu of all your server folders. Select the server folder to use for each special folder.
D): Thunderbird:
After you have set up your connection to your IMAP account, click "Get Mail" to fetch your existing mail and list of folders on the server.
Next, select the menu command "Options > Account Settings…" (Note that on current versions of Thunderbird, the default menu drops down from an icon of three horizontal bars, in the upper right corner of the mail window. You can use the Options command in this menu to display a menu bar at the top of the Thunderbird window if you wish. With the full menu, the menu command to access the special folders settings is "Tools > Account Settings…"
Select "Copies and Folders" in the list at the left of the Account Settings window. This panel has a section for Sent mail, Archives, Drafts, and Templates. Select "Junk Settings" in the list at left to specify the location of the Junk special folder.
For each special folder, the default choice is the the folder on the server with the "typical" name, e.g. "Sent" for sent, and "Trash" for trash. To use a different name, select the "Other:" option for the folder, and then choose the desired folder from the list of folders on the server.
Oof! That's a lot of explaining for a issue that Apple should have gotten right in the first place, or at least should have fixed in their next several tries. It would not break any existing functionality if they merely used whatever folder the server had created, and only made their own if there was none.

Is there ANY way to have a static widget over the top of a question slide?

I have a popup reference widget that I made and put it in a master slide and set it to ply on top, BUT if I add it to a question slide, the text from the question shows over it.
Any way to have a widget always be on the absolute top?
Click on the MSDS tab at bottom reveals popup, but the question text appears over the widget even though it is in a master slide set to shop on top.
Ideas?

Once your widget is on the slide, it has complete control over the display tree. So what you can do is to move up the parent hierarchy until you find the slide (parent.parent.parent) and then re-parent yourselft or you popup window on top of the hierarchy by just calling addChild(). That works well for the static widgets. You just need to deal with the position being different on the slide so you'll have to juggle with localToGlobal() and globalToLocal().
Whyves
www.flash-factor.com

Is there any way to have a COMPLETE list of all samples and loops ( Logic 8

I'm sure it's been posted previously, but anyway, I'm looking to buy new Apple Loops libraries and I have faced the fact , that many of the sounds and loops produced by third parties manufacturers have been already included in Logic installation discs.
I have a list of Apple Loops DVD's that have been included with Logic somewhere, the problem is, Apple didn't post ( I believe) the credits of all 3rd party manufacturers that have produced these libraries that are included with Logic or Garage band. Is there any way to have a COMPLETE list of all samples and loops that are included with Apple DAW's so I wouldn't duplicate anything ? I'm pretty much positive that Apple had other companies to sound design and sample all libraries for them, so is there also a way to have a list of those manufacturers? Again, the objection is to start upgrading the sound library without any possible duplication?
Thanks in advance!

Chris, I certainly don't mind additional questions and postings.
I believe there are many issues with Apple Loops and Logic that need to be resolved and people need to be aware of that. Unfortunately, in opposite to the old "german" version of Logic , there's no lifetime tech support, you can't even call and ask the question after 60 days , which isn't right for a professional software of this level, especially considering the fact that many things still remain vague in Logic even for developers and tech support people!( believe me, I've called and asked!)
Issues like that need to be resolved over the phone with the company, period!
One thing I also learned over the years as a Mac OSX user, if something doesn't work, don't mess with it. Delete your drive and re-install everything. This is very frustrating , I know, but unfortunately this is the only way to deal with OSX issues, if you got a problem with your system, don't try to fix it. It's never gonna be the same again. I know , it's off the topic a little bit, but if your content is missing from the system files, before installing your new Logic, back up your important files, wipe up your drive and clean install Mac OSX , run updates and then install the Logic. Most likely , everything will be in it's place, at least 90% or more. I gave up trying to make two system in my house to be compatible 100% , but it's OK if they're 90% or more identical. I spent enormous amount of time trying to find out what's missing and where, I visited most of the forums and there's no clean answer.
Message was edited by: Moderator

Is there any way to add a hyperlink to text in Messages.app?

Is there any way to add a hyperlink to text in Messages.app?
I frequently share links via Messages and would like to have clickable text with a hyperlink beneath vs an ugly URL.

Hi,
In iChat and early versions of Messages this used to be CMD + K keys together
This no longer works.
It seems CMD + K is free as a Modifier keystroke.
I would have added it as an item in System Preferences > Keyboard > Shortcuts.
The issue with that is the fact that there is also no longer an Menu item for it. (so it does not work).
You can add a URL and then Right Click and there is an Edit option but this only allows you to change the URL and not add a URL to existing unsent text.
Right Clicking unlinked Text does not allow you to Edit it either (well there are some format option but not Hyperlinks)
I can't find away around this.
I know in the past the AIM service suffered from malicious code sent in Hyperlinks so this might be the reason.
9:56 pm Monday; January 5, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Is there any way I can download my received text messages to my computer

I have a BB 8830 World Edition. Is they any way I can download my received text messages to my computer. If so, how? Thanks
Solved!
Go to Solution.

To backup/store your messages use Blackberry Desktop Manager software.
Connect your device to the PC.
Run the Blackberry Desktop Manager
Select "Backup and Restore" icon on the application window
Click on "Advanced" button and select the information that has to be stored.
When backup completes - there is a *.ipd file on your computer created. It contains all necessary information.
Later you can write information from this file to the blackberry device with the same mechanism.
For now there is no such a standard application to read stored messages on PC Computer.
Try to find third-party applications for that purpose.

Is there any way i can recieve my sons text messages on my phone

i have a 14 year old son is there any way i can recieve the same text messages on my phone as he gets

I see no reason to think this would not be legal.
Your son is not old enough to enter into a cell phone agreement with Verizon, so I assume YOU are the account owner. There is no law keeping you from putting an app on YOUR phone to track the texting history from YOUR phone. Whether or not he will be able to notice this app running in the background and disabling it is another matter entirely.
If you are unable to find/use an app for such a task, then what mdram4x4's suggestion is the only way. Of course, if your son only has a basic phone, the chance for an app which would do this is not very likely.

Bcc: Is there any way to change the "undisclosed recipients" text ?

Bcc: Is there any way to change the "undisclosed recipients" text appearing on the message at destination when I used Bcc?...
Eudora offers the possibility to choose the text that appears when using Bcc.
Does Mail do the same?...
If yes, how?...
Thanks
sergio

Every message that I send with addresses ONLY in Bcc:, when is received by others, or when I receive it back from some yahoo group, has the reading: "undisclosed recipients"...which I can see either when I receive an answer from some individual or when I receive the messages from the group.
Of course, if I write any address in the "To:" space, what comes out is the address I type.
My question was something else: HOW to CHANGE what comes out.
In Eudora it is possible to have ANYTHING one wishes appearing INSTEAD of the "undisclosed recipients", it's enough to type a code inside the message once, and choose the text one wishes to appear.

Just switched from safari on my imac. when using search menu safari gave me the option to "find on this page," which was an incredible help while doing research. Is there any way to have this feature using firefox?

Just switched from safari on my imac. When using search menu in safari I had the option to "find on this page," which was an incredible help while doing research and looking for specific phrases/words. Is there any way to have this feature using firefox?

I think Safari has the same keyboard shortcut as Firefox "command+F" on a Mac or "Ctrl+F" on Windows.
Look in the lower left corner for the Find. There are more likely to be differences in Find Next and Find Previous in the keyboard shortcuts, but continuing at the Find bar at the bottom doesn't matter what browser you use. There is an "X" there to dismiss the Find bar. In Windows the "Esc" key will dismiss the bar if you are within the find text entry area.
Keyboard shortcuts:
* [https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts?s=keyboard&r=0&as=s Keyboard shortcuts | How to | Firefox Help], from Mozilla very limited number of shortcuts but will show correctly for your system
* [http://dmcritchie.mvps.org/firefox/keyboard.htm Firefox and other Browser Keyboard Shortcuts (Comparison Table)], more comprehensive but is oriented to Windows users with some guidelines for Mac and Linux users.
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

Lately while doing a 'save image as', it tries to 2nd guess me. I HATE that! Any way to turn this feature off?

Doing the 'save image as' option, it will go back to the previous folder and keep going there for about 5 times before it save the image to the folder I want. Then when I change folders again, it will go back to the previous folder for about 5 more times. Is there any way to turn this feature off? I do not like it at all.

Current Firefox versions remember the download directory based upon the URL, so if the URL changes then the default folder may be chosen if there hasn't been selected a download folder before for that server.
*[[/questions/889958]]
*[[/questions/882443]]
Firefox 11 will have a workaround by providing a pref ( browser.download.lastDir.savePerSite) to disable this feature.

Any way to have file size included in the first search in finder?

Is it possible to somehow show file sizes when doing a search in finder?
On Panther, it was very helpful to have the file sizes listed. This immediately revealed whether the photoshop files I was looking for were full size or reduced.
But when I run a search in Snow Leopard it only shows name, kind and last opened. Otherwise I have to also add a second search to add in file size.
Any way to have file size included in the first search?
Thanks!

Well, I wish I could take credit for knowing it was there before two days ago... but I dropped my laptop a couple months ago and it finally died for good on Friday, and I noticed this on the new laptop when setting up my Finder preferences.

Any Way To Have Dreamweaver Cut Off Text Past 100%?

Similar Messages

Maybe you are looking for