Any way to have restarts login-free (but not bootup from shutdown)?, Any way to have restarts login-free (but not bootup from shutdown)?
I like the idea of having to login to my mac, for security's sake, but when I do a restart, almost always within a couple minutes I'll be using it again. Typically, I'll hit restart, then go downstairs to get a coffee and come back to my desk.
It'd be great if there was a way to set it up so a bootup from shutdown or sleep required a login, but a restart would bypass the login screen altogether, so I'd come back to my desk and it would be ready to go.
Is this possible?
Not possible.
Similar Messages
-
Hi everyone. I have a iPod nano 5th gen and every time I charge it, it comes up with the apple sign. It just won't turn on. I can restart it but it goes to the apple again. Is there a way I could get it replaced? I did win it in a game at penrith bowling .Any thoughts????????
Can you play the song in iTunes?
If you can't the song file is probably corrupt and needs to be replaced. -
No sound. Mute is not checked, volume all the way up on iTunes and on status bar. What am I doing wrong or missing? I restarted last night and it worked before that but not since, any one have any ideas?
Thanks, RobFirst off did you go to System Preferences > Sound > Output > And is the correct output selected?
Any red light coming out of the headphone jack? If so, you'll need to re-set the little switch in there by inserting a 3.5mm jack carefully in & out 20 odd times. Or grab a toothpick (non-conductive) and a flashlight.
Tried anything else that produces a sound? On restart do you get the chime? Perhaps check into Audio Midi Setup to ensure your output is selected correctly using the cog at the bottom left. -
Hi all,
The problem is:
I have been using site at different times from different accounts, and I have used autologin thing.
But when last time I opened the site, for some reason Mozilla automaticly logged in with my very old account.
For some reason in Security -> Passwords - I see only 1 "Login" detail for this site.
Is there any possible way to see all Logins (login information) I have used on this site to log-in?
May be some file folder is recording them?
ThanksIf a password is filled then that can only be done if the password is saved in the password manager.<br />
If only the name is filled then that can be done by form fill.
*Form History Control: https://addons.mozilla.org/firefox/addon/form-history-control/ -
Is there any way to connect my 2011 macbook pro to my PC laptop (Dell) so that I can get files off of the Mac? The display on the pro is out and I've got a black screen. The computer turns on. Actually it turned on one time after many tries and when I took it the Mac store the guy hit restart before I could stop him. I don't have another Mac to back up files to in restart 7 mode and I can't see my external hard drive to copy to when the computer has no display, so I am at a loss on how to get the files. I would like to get them before I send in for repairs. Any suggestions are appreciated.
The only other thing I can think of is to pull the drive out and hook it to another machine with a USB enclosure. Something like this:
http://www.amazon.com/Vantec-NexStar-2-5-Inch-External-Enclosure/dp/B002JQNXZC/r ef=sr_1_2?ie=UTF8&qid=1388312417&sr=8-2&keywords=2.5+enclosure
Then you could read it like an external USB drive. It's easy to open up and get the drive out. -
really just want my songs back in itunes, trying to find a way to do it all at once instead of clicking on individual song files since i have so many.
copy them and then paste them into music/itunes/itunes media/music/ automatically add to itunes. that should automatically add them back in.
-
My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
I have bought a WD My Book World Edition to use for back-up of my iMac, but when I try and log onto the drive with Apple time Machine (back-up software) or connect in any other way I get the message 'There was a problem connecting to the server "MybookWorld.local" The version of the server you are trying to connect to is not supported. Please contact your system administrator to resolve the problem'
It is a brand new iMac and running Lion OSX
Any ideas on how to solve would be gratefully received?Followed the directions on this page and it worked!
http://forums.macrumors.com/showthread.php?t=1102423
Part One - Turn on SSH (in the admin panel)
[1] Go to to http://mybookworld.local
[2] login: username will be admin, password will be whatever you have setup. If you can't remember it should be in your Mac OS X keychain (Utilities > Keychain Access, search for "mybookworld"). If you have not changed if from the default the password will be admin as well.
[3] Switch to advanced mode.
[4] From the System tab, pick Advanced.
[5] Enable SSH Access, and click submit.
[6] Click on the network tab and then the LAN button
[7] Make a note of the IP address
Small, maybe obvious, but nevertheless important point: For the install to work, your NAS needs to be connected to a router with internet access.
Part Two - Install netatalk2.2
[8] Open Terminal.app (Utilities > Terminal)
[9] Enter the following command (substitute in 127.0.0.1 for the actual IP address you noted down in step 7), then hit return:
Code:
ssh [email protected]
[10] When prompted, enter the ssh password (will be welc0me).
[11] You are now going to download the installer. Enter the following command, then hit return:
Code:
wget http://mybookworld.wikidot.com/local--files/netatalk2-2-on-whitelight/install_netatalk.sh -O install_netatalk.sh
[12] Once completed, you will need to run the installer. Type:
Code:
sh install_netatalk.sh
[13] You will be asked a number of question during install, answer yes to all. When asked about the "DHX2 login process", I opted to install the modified version, so I can confirm it works.
[14] Once the box has restarted, you should be able to connect to your afp shares and continue to use Time Machine. -
Has anyone upgraded to iOS 8 and have found that the service provider keeps dropping out? I have to restart my iPad to get my service back. Only happened after upgrading! Would love A fix for this.
I'm not going to say that you won't find an easier solution than the one below, but I would recommend it as the "ultimate" solution.
keithfrommariettaOct 12, 2014 3:25 PM Re: IPAD2 very slow after IOS 8 upgrade
Re: IPAD2 very slow after IOS 8 upgradein response to pacoKAS
SOLVED: IOS 8 Issues on iPad 2:
I just returned home from a visit to the Genius Bar. Like you and many others, when I upgraded my iPad 2 to IOS 8, it became practically unusable. It was VERY slow, lagged whenever trying to to do anything. Lots of screen freezes and apps spontaneously crashing. I was convinced that the processor on the iPad 2 just couldn't handle the new IOS and I went in to see about restoring to IOS 7.
Thankfully, I was hooked up with a very sharp guy at the bar. The problem is not with the OS, it is with it being an *upgraded* OS. He used the analogy of when you had an older Windows computer and how over time (and over upgrades), they just tended to get slower and slower because of all of the garbage that was carried forward in the upgrades. At those times (and if you've ever had a Windows computer, you get this), the only thing that would speed it up would be to wipe the machine and do a fresh install of the current OS and then reload your apps, and the viola, everything would be fast again. Well, it turns out that IOS can suffer the same problems.
THE FIX: FIRST, be sure you have a current iCloud backup of your device. Connect your iPad to a computer that has a clean fresh copy of IOS 8 on iTunes (this is best done with a computer other than the one that you sync your device to because you DO NOT want to restore it from a back up just yet). Ideally, if you do this at an Apple store you'll be assured of the right version there and someone to answer any questions you might have along the way. You then hold the power and home button down to hard-reset the device and continue to hold them down until it reboots into recovery mode. You then follow the instructions on the computer to reinstall the OS on the device (which wipes everything from it and then reinstalls a clean copy of it). Once this is done (which only takes about 15 minutes), your device will reboot and ask you to set it up. Answer the questions about language, location, etc. and continue until it asks you to log into your iTunes account. Once you do that, it will ask if you want to either 1) Set it up as a new device, 2) Restore from iCloud, or 3) Restore from iTunes. Choose (2), restore from iCloud. This will ensure that it brings down "clean" copies of all of your apps and preferences rather than the potentially corrupted ones that might reside in your iTunes backup. That's it! It will take a few hours depending on how much data and apps you have, but I am happy to report that my iPad 2 is now running IOS 8 and it's running as fast as it ever did when it was brand new!
To sum it up, this process 1) Wipes your device and the garbage causing your problems, 2) Loads a clean and bug-free version of IOS 8 to your device, and 3) restores your apps and data so that it looks just like it did before the wipe, with the exception that it works now! :-)
Note also that by following this process you don't have to go through the painful and laborious process of reloading all of your apps, data and/or settings. iCloud takes care of all of that for you. -
Backstory: There are two possible events that could be causing this
1: At some point I may have followed a ''Tinyurl' link that consquently lead me to a youtube video, to which youtube worked perfectly fine before hand, and this is where i witnessed the first crash. Theories into whether this link, previously stated, may have done something to my system have been thought about, but the fact that youtube still works on the latest Microsoft Internet Explorer seems to present the idea of a virus or an error redundant. I own the latest Macfee antivirus software and Ccleaner(running the registry check) and have run them complete with disc defragment and scan disc error recovery along with an additional malware scanner. Nothing seems to have come up on anything. After doing all this, my last resort was System restore and this seemed to solve the problem, mainly because i had an earlier version of firefox. therefore i resisted updating for aslong as possible whenever it told me to update. but the otherday i thought i'd risk it again thinking it may have been a problem alot of people have been having and it would of been fixed, but sadly it hasn't. this lead me to google the problem and was advised to start firefox on 'safe mode' as there may have been a confliction between add ons or plugins with youtube or some thing like that, but sadly that hasn't worked either. The plugins i had installed with it were the ones firefox has told me to get, or recommended and the only two addons i had on firefox was Adblock plus (fanboy subscrip) and Noscript.
Details of what actually happens: go to a youtube link, video loads for about 2 seconds(both video and audio), screen freezes, and flashes maybe once with some small lines across the bottom half of the screen horizontally towards the right corner, then the screen goes blank and makes my laptop dorment, but still running, thus I restart my system.
Sadly now when I system restore there isn't a point far back enough before this problem. So its either i downgrade(which seems to be the only option) or simply stop using firefox, as internet explorer works perfectly fine. however running firefox with no scrip and adblock plus is the ideal browser customisation, which is why this is rather annoying.
so number 1 was the tinyurl theory and i must admit i was abit foolish to follow such a random link, but whats happened has happened.
2: basically there is a major disfunction with the latest firefox that has to with the addons i have included onto firefox and this seems to be causing a terrible effect on my system.
in a nutshell: firefox worked perfectly before upgrading to the new firefox and before i followed this link, the rest of my system is completely normal and virus and error free or so it says, Other browsers seem to work also. safe mode does not cure the problem.
Running on a customised Dell laptop, which is pretty midrange-toprange and hasn't been active long, so it has the general HD video card thats included in all Studio 15 Dell laptops.
any help appreciated.
cheers.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; MDDC; OfficeLiveConnector.1.5; OfficeLivePatch.1.3; Creative AutoUpdate v1.40.02; AskTbMYC-SRS/5.7.1.11118)I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6. -
I have an iPhone 4S and when I try to add an iCloud account is gives me an error "Cannot Sign In, The maximum number of free accounts have been activated on this iPhone." Is there any way to deactivate an account? I have one for myself, one for my family and one for my work. I had all three on my iphone and then I deleted my work. I wanted to get my own person @me.com account. It wouldn't let me create it from my iphone, so I created it from my Macbook Pro. I am trying to add it to my iphone, but it keeps giving me that error. If there is a way I can deactivate my work one so I can use my @me.com personal account?
Welcome to the Apple Community.
Unfortunately once all the 3 iCloud accounts have been created on your mobile device, you cannot create any more regardless of what you do. You will need to re-use one of the accounts that you have already created or create your new account on another device or computer.
You should however be able to add existing accounts to your device, are you sure you aren't trying to create on rather than simply use an existing one. -
HOW CAN I TRANSFER PHOTOS FROM MY IPOD TOUCH TO MY PC BUT THESE PHOTOS ARE NOT IN THE SAVED POTHOS FOLDER. THEY ARE IN SEPARATE AND DIFFERENT FOLDERS THAT MY DAUGTHER SAVED FROM HER PC. IS THERE ANY FREE WAY TO DO IT. PLEASE REPLY TO JUMACAVA07@HOTMAIL.
THANKSIf you need to Transfer photos from iPod to PC,I have a method for your reference,I suggest you use iStonsoft iPod to Mac Transfer software to copy photos from iPod to Mac,a professional software,Not only can you quickly Copy pictures from iPod to Computer,but also can save a lot of trouble and time
[B]Follow these steps to Transfer photos from iPod to Mac[/B]
Step 1. Download and run the iStonsoft iPod to Mac Transfer software on your Mac computer
Step 2. Connect iPhone with Mac
Step 3. Hit "Photos" to scan photos from iPod to Mac
Step 4. Click "Photos" button to transfer photos from iPod to Mac
Step 5. Wait a while,you will success Transfer these photos from iPod to Mac
How to Transfer/Copy Photos/Pictures from iPod to Mac computer -
Help please? My first time on this forum so apologies if I boob in some way!
I have a monthly subscription for PS and Lightroom.
When I opened Lightroom this morning, it told me an upgrade was available through CC. I probably did something wrong, butI couldn't get it to download.
I came on the forum and read a couple of discussions on your pages and found a reply that posted links to the pages where Lightroom 5.7 could be downloaded.
I clicked the link and downloaded the update fine.
However, now when Lightroom opens, it is asking whether I want to BUY or have a free 30 day trial and won't progress any further into the app.
My CC icon reveals that my software is up to date but I can't get past this register screen, without selecting BUY or FREE 30 TRIAL .
can anyone help please?Help please? My first time on this forum so apologies if I boob in some way!
I have a monthly subscription for PS and Lightroom.
When I opened Lightroom this morning, it told me an upgrade was available through CC. I probably did something wrong, butI couldn't get it to download.
I came on the forum and read a couple of discussions on your pages and found a reply that posted links to the pages where Lightroom 5.7 could be downloaded.
I clicked the link and downloaded the update fine.
However, now when Lightroom opens, it is asking whether I want to BUY or have a free 30 day trial and won't progress any further into the app.
My CC icon reveals that my software is up to date but I can't get past this register screen, without selecting BUY or FREE 30 TRIAL .
can anyone help please? -
I recently gave my old iPhone to my nephew, I did not clear out my old phone before I gave it to him, when he transferred to his account, he had my iCloud info on the phone, and it updated the contacts on my new iPhone 5 to his contacts. Is there any way for me to get my contacts back?
This is caused by using the same iCloud account on both phones. When you do this any data you sync with the shared iCloud account such as contacts is merged and will appear on all devices connected to the account. To fix this you both need to have separate iCloud accounts (you can continue to share the same Apple ID for purchasing from the iTunes and app stores).
Decide which iPhone will be keeping the current iCloud account. On the one that will be changing accounts, if you have any photos in photo stream that are not in your camera roll or backed up somewhere else save these to your camera roll by opening the photo stream album in the thumbnail view, tapping Edit, then tap all the photos you want to save, tap Share and tap Save to Camera Roll.
Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account. (This will only delete the account from this phone, not from iCloud. The phone that will be keeping the account will not be effected by this.) When prompted about what to do with the iCloud data, be sure to select Keep On My iPhone. Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom). Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge. This will upload the data to the new account.
Finally, to un-merge the data you will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the data you don't want (i.e., deleting your nephew's data from your account, and vice versa).
As for recovering your lost contacts, if they aren't on icloud.com when you check from your computer, you will have to recover them from a backup source. You could try restoring to your last backup but this doesn't always work for contacts. (Chances are you nephew deleted your contacts from his phone, not realizing it would also delete them from yours.) -
10.6.8 update won't install gets half way through then just freezes spinning beach ball for 4 hours any ideas y. Tried and restarted 3 times already does the same thing each time have to hold down the power button to restart. Anyone can help
Ok will check, as of right now I have 82.57gb free, that's plenty of space will check the disk though using disk utility. Also I am now downloading the update from the apple website instead of going through software update
Maybe you are looking for
-
Issue while saving the project plans into XML
Hi, Could anyone of you please help me here. We are having one custom field(Type: Text) in the project level(Custom field name: ProjectComments) and end users are entering the data against this custom field more than 200 characters. The problem here
-
Hi, I have loaded in process chain a ODS in Delta, the load was not successfull it went in error stating that : "The last delta load is still running; no new request possible" and so i deleted the request from manage. But still its showing the same i
-
How to get the list of only installed bundled application on mac os X through programmatically???
how to get the list of only installed bundled software on mac os X through programmatically???
-
Problem in deleting records in DB2
From session bean method i have called DAO & Entity Bean to delete from some tables in DB2. But it is throwing Deadlock or Timeout exception and got rolledback. What could be the reason. When i comment out DAO part it is working fine. Is there any re
-
Stuck on "Starting Windows" screen
Hello, For some reason, my laptop graphics display shut down earlier today. So, I tried the shut down my laptop (thinking that it was just overheating from work) and let it cool down. I tried to start it up a bit later and it would not start up. It j