Any way to install with an ITE 8211 IDE chipset?

Hi all!
I've been using gentoo for a while and I've been thinking about moving to Arch because I've grown pretty tired of the compiling. I however encountered a serious problem when I tried to install Arch using the install cd. This motherboard uses ITE 8211 IDE chip to supply two Parallel ATA connectors. I currently have only one 120gb harddisk and it's connected to one of those. I've tried both 0.7 and 0.7.1-pre1 and neither seems to detect the IDE chipset, so the installer can't see any harddisks. There's a driver for this chip in the kernel, called it821x, but neither of the install cd's seems to have this module. Is there some way I could have the install cd detect and use this IDE chip so that I could install Arch?

Is there some way I can bypass the seemingly artificial restriction by the installer and force installing of iMovie '08? I'm happy to use it at my own risk, accept glitches, not expect Apple to support it.
Not that I have found, sorry!
Sue

Similar Messages

  • Is there any way to install OS without USB Cable?

    Is there any way to install coroupted OS of z10 with USB cable? Actually my phones USB point is not working and OS is coroupted. IS THERE ANY WAY TO REINSTALL IT?

    At
    Navigate to Start -> Control Panel -> Device Manager -> Network Adapters.
    What do you see?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I am trying to install my HP desk jet 3050 and it only supports mac 10.6 and hp web site has the same software is there any way to install it in mac 10.6 mode

    i am trying to install my HP desk jet 3050 and it only supports mac 10.6 and hp web site has the same software is there any way to install it in mac 10.6 mode it works with lion but i need the software on my mac

    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01664444&cc=us&lc=en&dlc=en #N43
    Seems your printer is supported in Lion.

  • Any way to install EFI 1.7 ?

    Hello,
    Is there really any way to install the updated EFI 1.7 in a Macbookpro Early 2008 ?
    I'm sure that the controller is compatible with the SATA II and i really need an update of the EFI in my computer.
    On the apple updated EFI page there is even NO Update for my computer model and no information about the EFI ! What's that ???
    If someone found a solution for enabling the Sata II in that computer model; please let me know !
    Thank you.
    Message was edited by: djkawada

    Sorry to have post in the wrong part of the forum.
    But i whant to know why there is no Firmware update.
    Today SSD are really faster than Hard drive and my computer model is limited by Software at 1.5Gb/s but from the chipset (Hardware) ICH8-M AHCI it is capable of 3Gb/s.
    (i have screenshots to prove that this chipset can run at 3Gb/s if you dont trust me.)
    So, when you say that apple said that it doesn't need an update, i really don't understand how they can say such thing today.
    And because it is a "pro" machine wich cost me over 2K€ i think it really deserve, since the controller is capable of better performances.
    And still, me and others custommer will really appreciate that update to run their computer faster.
    Thank you for your understanding.

  • Bought two audition cs6 licenses one for pcs and one for mac, not finding any way to install on mac

    I bought two audition cs6 licenses, one for our pcs and one for our macs...not finding any way to install on our macs...when I run the cd it only has programs for windows...nothing for mac...I have my mac serial number, but no install app...

    If you don't have the Mac files with the disc you can probably still download the installation files and use your serial number from the purchase to activate.  Here is a link to CS6 downloads:
    Download CS6 products
    You should check with Adobe support regarding getting the disc copy of the files if that is what you purchased, unless they know something that would result in the files already being in your possession thru that disc somehow.
    Get chat help with orders, refunds, and exchanges (non-CC)
    http://helpx.adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )

  • Is there any way, to create with Adobe Muse HTML-Mail Templates?

    Is there any way, to create with Adobe Muse HTML-Mail Templates? or to convert the createt page to only html content? any other tool like an website copyer?
    tanks for help!

    Off the top of my head, you should be able to create mail templates in muse BUT it will require  very basic html/css knowledge on your part. I am assuming you want to do just the signature?
    Create the design you would like on one page, dont do any kind of styling in a master page. Then export the site into a folder. Open the html file with notepad/ textedit and then copy just the code for JUST the template. Throw it in you mail app of choice and it should work.
    This seems like something that would be done alot quicker in dreamweaver in design view.
    PLEASE NOTE: ^i could be completely wrong - but in theory this may work.

  • How do I get a refund?  I have tried to use this converter to change a PDF to a word document or excel document three of four times and it always fails..  I want my money back but don't see any way to communicate with Adobe.

    How do I get a refund?  I have tried to use this converter to change a PDF to a word document or excel document three of four times and it always fails..  I want my money back but don't see any way to communicate with Adobe.  i really just want my money back.  Very disappointed.  Also disappointed that it is so hard to find a way to communicate with Adobe that I have to resort to asking this question in this forum. 

    You need to use the CHAT link in support to reach Adobe staff. Be sure you know the product name you are trying to cancel, Adobe have lots of products, several converters etc. I think it is ExportPDF you have, most likely.

  • I'm forced to use a xoom for work. Is there any way of installing android ICS via virtual machine or any other mechanism?

    i'm forced to use a xoom for work. Is there any way of installing android ICS via virtual machine or any other mechanism?

    On the iPad? No.

  • Any way to export with multiple presets at once?

    Hi! Is there any way to export with multiple presets at once? I do a lot of product photography, usually clients send me around 5 to 10 pieces to photograph, and from each photo requires to be exported to about 7 different formats and sizes for different uses. I have a preset for each export, but this requires multiple clicks per export, select the preset, the destination folder, etc.....   and at the end I end taking about 1 hour to just export files when if I could just select 1 time a folder of presets and the destination folder just once, then it will take no time to get all oft those exports.
    Thanks!

    Some of those other photographers have assistants they can task with doing the drudgery.
    I would describe what you're wanting scripted multiple exporting, not multiple export presets, because multiple-exports don't necessarily rely on presets, just initiating an Export and clicking on various things for each one.
    I assume you have a preset set for each of the 7 format-size-uses variations, and then most of the time consuming part is setting the Choosing the destination folder that gets mirrored to DropBox?  You can copy/paste most of the path into the Folder address area after clicking Choose.
    Without knowing what your master-photo folders and dropbox-mirror folder names and organization are it's hard to know if you've thought of all the shortcuts you might use or if things are organized in the most efficient manner.
    If you're on Windows, maybe something like AutoHotKey macros would help with what you're doing.

  • Is there any way to install Win7 64bit onto a partition

    Is there any way to install Win7 64bit onto a partition from a Win7 CD? I have tried bootcamp several times and it won't work. I am running a late 2011 MBP 500gb hd, 2.7ghz i7

    Bootcamp is saying no USB device connected.

  • Is there any way to install OSX Mountain Lion to a MacBook Late 2007

    hey i was just wondering is there was any way to install OSX mountain lion to a macbook late 2007. ive gottan it before to point where i was about to boot up into the software but on the boot screen i got a stop sign. please help me if you can. thank you

    i just ran the follw=owing command on mac
    ioreg -l -p IODeviceTree | grep firmware-abi
    and the resond i got was
    "firmware-abi" = <"EFI64">
    so what does this mean

  • How do I talk to someone about my account and merging two subscriptions together...Can't seem to get to any way to conversing with a human from the website.

    How do I talk to someone about my account and merging two subscriptions together...Can't seem to get to any way to conversing with a human from the website.

    Worst Service In the World
    I just want to cancel my order and get a refund, the company MUST be corrupt because it is nearly Impossible to get what is rightfully mine. It's been 3 years.. how, sad, is that, I got other people to try too...
    they steal from people... by making it impossible to talk to anyone real.

  • Any way to install Vista in 10.4 other than Boot Camp?

    Since Boot Camp for Tiger went to the chopping block, is there any way to install Vista on my old-ish iMac? My brother's a gamer....

    I don't think so.
    The closest thing you can do would be getting VMware Fusion
    It's a parallel so it runs right on your mac side
    It's not quite as fast as native speed, but it's about 90%-95% and works really well for everything except gaming
    There's a free beta out now, so you might wanna try that

  • Any way to install Windows 7 by copying the install disk to a HD first?

    Any way to install Windows 7 by copying the install disk to a HD first?
    I have HDs installed in my optical bays.
    I can copy the Win 7 install disk to a new freshly formatted HD if needed.
    I am unable to install from my Firewire DVD.
    It will not work.
    I have a NTFS partition ready to go on an internal drive.
    If there is a way to do this I would appreciate any help.
    I really do not want to put my DVD back in if it can be avoided.
    Thanks ... Ken

    I've done an install off a hard drive, but I was already running Windows on a separate drive partition.
    People have put DVD on flash memory, though that is 'maybe' and depends on booting from USB devices.
    I routinely put OS X Install DVD on a firewire hard drive and installs quickly (to say nothing of booting in under 60 sec).

  • Is there any way to sync with new pc? HELP!

    Ok, so I have an ipod touch and a new computer. The old computer that the ipod was synced to was destoyed. Can anyone tell me if there is ANY way to sync with the new pc AND keep all the songs, games, pic, and everything? I don't want to lose everything!!

    There are several shareware utilities that can be used to transfer some of your data such as music files from the Touch to the computer - search for "ipod" at VersionTracker. Contacts and calendar data will sync automatically when you use iTunes to sync the Touch, but be sure to get your music files and pics transferred first. Apps should sync normally.

Maybe you are looking for