Any way to make Mail.app receive before send?

I work at an ISP and we have a customer who is outside of our range, using Mail.app to connect to our POP3 server.
Normally we have them use their provider's outgoing mail server, and our incoming mail server since our mail server rejects e-mails originating outside of our IP pool. Usually this works.
However, the customer's provider blocks use of their outgoing mail server if the e-mail address is from a different domain.
The one solution would be to have Mail.app receive (and thus authenticate with our mail server) before sending.
Is there any way to do this?

Are you talking about POP before SMTP authentication and if so, are you saying the account must check the incoming mail server for new mail immediately before sending mail with the account's SMTP server and this must occur each time before sending mail?
I thought when POP before SMTP authentication is used/required, checking the incoming mail server for the account at least once per online session is all this is required, not each time immediately before sending mail.
There is no setting to do so in Mail but you can manually select Get Mail before sending a message if I'm understanding this correctly.

Similar Messages

Is there any ways to make Mail app show prefix and suffix in the address field?

I apologize for any inconvenience that my poor English may cause.
I would like to ask if there is a way to make Maill app show prefix and suffix in the address field.
This is, in my culture, very important, especially for formal situations. When I call someone such as professors, bosses, I should put prefix after their names to show my respect. In Microsoft Outlook, there is a field called 'Display as'.
http://www.slipstick.com/outlook/contacts/contact-address-book-options-settings/
Therefore, I can choose how the name will be shown in my messages. For example, Prof. Kim instead of Kim. However, as far as I know, there isn't such options in Mail app. Is there any way that I can modify the way of displaying names in the address field in Mail app?

As far as I can determine, that is only how you see the email address, not how it is sent.
You can set up Prefixes and Suffixes in Contacts using the Add Field submenu of the Card menu:
If you use the Edit Template... command, you can choose to always have the Prefix and Suffix show on new cards.
However, I don't think Mail uses anything but First, Last for addressing emails.
You can override the behavior by manually with:
Prefix First Last Suffix <[email protected]>

Is there any way to make Mail open next message?

Is there any way to make Mail open the next message on the inbox automatically after deleting, forwarding o saving a message?
I mean, is there any way to, after reading a message, going to the next or previous message without double clicking the main inbox window?
I used (on windows) to read mail on outlook, or even on entourage for mac, and after I read a message, even if I deleted it, forward it, replied it, or even saving it on a folder, automatically the program (outlook, entourage, hotmail, etc) opened the next message on the inbox, but I am not able to find any way to make Mail do that.
Is there a way to it? Or should I provide suggestions to Apple?
By the way, no meant to prefer microsoft for this, I just think this is a cool feature for reading several messages one after another without going back to the main inbox page and double clicking the message to read...
Thanks for any help

Down-arrow, Return. Return opens the selected message. I read through hundreds of messages without ever touching the mouse. Once you get used to the keystrokes, Mail is extremely efficient.

Is there any way to make Mail forget previous search terms?

When I search for a mail starting with say, the letters 'and' it finds every email to, from or whatever associated with those three letters. However, it includes, in the cases of to or from, old email addresses that are no longer in 'Contacts' and or have bad memories for me. Is there any way to make 'Mail' forget those email addresses completely?
This is not or does not seem to be the same as removing an email address from the previous recipient list.
Thanks.

Hmm. This removes the recipient only in such a way that when I type the first 3 letters of an address in a new email, that particular recipient does not appear.
However, if the same first three letters of the addressee's name are typed in the Mail search function, the previous recipient's email address is still offered as an option. So I am afraid this does not help.
Removing a previous recipient's email address is apparently not the same as making the Mail application forget a particular email address.

Is there any way to pass Mail.app rules to Outlook?

Hello, I want to use the same rules i use in Mail app from OS X in Outlook. Can you help me find the way to do it, because I have tons of rules and don't want to copy them one by one.

How much fuss is too much?
You can easily change your home directory to the other drive. That would certainly take care of it. Copy your home directory to the other volume. Then, in System Preferences > Users & Accounts, select your account, right/command click and choose Advanced. Change your home directory. Log out and back in.
You could also try to hack around with symbolic links, but that is more fuss.

Is there a way to make Mail app badge to show the count of unread mail for only certain account?

The mail app badge normally shows the total count of unread emails in all your accounts. Is there a way to set it so that it only displays the count from one specific mail account?

No.
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf WYSIWYG

Is there any way to have Mail.app's data live on a different volume?

Simple one:
have a Macbook with a 80GB SSD and a 500GB HDD, i have 4GB of email, id love to be able to redirect mail.app to save the live synced gmail data to the 500GB drive, and not fill my precious SSD
is this possible without too much fuss?
(like with Outlook on a PC i can manage the data file and have it live wherever i want.
thank you

How much fuss is too much?
You can easily change your home directory to the other drive. That would certainly take care of it. Copy your home directory to the other volume. Then, in System Preferences > Users & Accounts, select your account, right/command click and choose Advanced. Change your home directory. Log out and back in.
You could also try to hack around with symbolic links, but that is more fuss.

Any way to make all apps run in same JVM ?

Say Im a application user and I want to start up 9 or 10 different Java applications. Is there anyway to run all the applications in the same JVM ? If each applicaiton needs its own JVM instance, memory use could quickly get big!
Compare this to Visual Basic where the runtime machine (vb runtime) is in a DLL that each application can share the services of.

Just for the sake of curiosity has someone added the total size of the classes
that a minimal java application loads?I haven't seen that anywhere. I went ahead and generated the raw data for 1.3.1 and posted it in this topic in the JRE forum. It includes a list of the classes loaded and the complete file list of rt.jar with file sizes. Perhaps a patient person (or a person deft with grep, perl, access, excel, etc.) can calculate the requested statistic.
http://forum.java.sun.com/thread.jsp?forum=32&thread=157380
Alternately, anyone who wants this raw data can request a zip file via e-mail from me.
Joe Walp <[email protected]>

Iphone 4S newly updated to iOS8, keeps popping up window notifying me of things I turned off (cell usage, location, etc) to preserve battery life. Is there any way to make them stop telling me every time I use the affected apps?

I have finally taken the step of updating my iPhone 4S to iOS8 after learning the hard way last update to wait for the bugs to be worked out. I was horrified to find that the battery was being sucked dry in no time at all. After finding a great article posted elsewhere on the apple forums, I went through and turned off all unnecessary options involving the use of cell data, location services and background refreshing. My battery life has thankfully returned to what it was before the update.
HOWEVER, now, every time I open an app for which I turned these things off, the window informing me of that pops up.   I am getting really irritated by this as I made all of these decisions deliberately and am well aware that I may need to go back and change them in order to activate certain capabilities when I want to use them. I had done the same thing with the last iOS, but there were far fewer that needed to be turned off and the battery life seemed to be less affected by those that I left on so it was not the annoyance it has become now.
Is there any way to make the phone stop presenting me with these idiot messages?   TIA

Sorry no, there isn't a way to turn off those reminders.
You can send Apple a feedback here http://www.apple.com/feedback/

After upgrading to OS Mavericks, I realized that the Partition for Windows is gone. I have really important data on this drive without a back up. Is there any way I can get this data before reformatting. Is there any third party software for receiving the

After upgrading to OS Mavericks, I realized that the Partition for Windows is gone. I have really important data on this drive without a back up. Is there any way I can get this data before reformatting. Is there any third party software for receiving the data or any possible way? Money is not a limitation to this fix. Please help!!!

sure pretty simple. make a backup of your current settings
http://support.apple.com/kb/HT1766?viewlocale=en_US
then restore device from old backup you need pics off of
then import pics to computer
http://support.apple.com/kb/HT4083
you may need to save pics to camera roll first
then restore the new backup and sync pics back to phone via itunes
Peace, Clyde

Is there any way to make the sent folder in mail list emails "to" instead of "from"

Is there any way to make the sent folder in mail list emails in the "to" order instead of "from".

Sure open Sent folder.
Just above first message is an icon titled Sort By Date followed by a downward pointing arrow.
Click on the arrow and select "To" from the list.
Allan

Are there any ways to make sure FCPX saves the project before quitting?

The other day when I was working on a project, Final Cut Pro did not save any changes I made for the last 3 hours. I lost all of my work. I understand that FCP is supposed to autosave projects, but it didn't. Are there any ways to make sure that it saves before quitting? I am currently running the trial version 10.0.8, and I plan to upgrade to the full version, soon, provided there aren't too many bugs.

It turns out it was a corrupted project. All other projects autosave before quitting, but that one always displays the same last modified time. I solved it by creating a brand new project.

My family shares one apple id. Is there any way to make an apple id for each member of my family and have it all connected to the same credit card and have the same previous downloads open to download by signing in to each members personal apple id?

My family shares one apple id. Is there any way to make an apple id for each member of my family and have it all connected to the same credit card and have the same previous downloads open to download by signing in to each members personal apple id?

Hi cindy,
If you all have individual Apple IDs, then you would be able to dowload music from a shared iTunes library on a computer, but you would not be able to sign on each individual ID on an iOS device in order to download music purchased under the original Apple ID without a 90-day waiting period between sign-ons.
Here's what I mean:
If you were to sign on a new Apple ID on, say, an iPhone, and then were to purchase and download some music from iTunes, then you would have to wait 90 days before you could sign on the old Apple ID to that iPhone in order to download previously purchased material (and vice versa).
However, if all of the music purchased by that origjnal Apple ID is in an iTunes library on a shared computer, then you can hook up the device and selectively sync any music in that library to the device. You can also sign on any of the Apple IDs to that shared iTunes library and purchase music to be added to the library.
You would need to authorize the computer for each of the new Apple IDs.
Each of the Apple IDs would also be able to download that music purchased either by syncing to the iTunes library on the computer or by downloading it OTA on the device.
So, each Apple ID can download music, movies, etc. purchased with that Apple ID OTA to the device. Also each Apple ID can sync any music, movies, etc. that are in the iTunes library on the computer regardless of who purchased them.
The only other thing you would need to remember is that if an App needed to be updated, then the original Apple ID that was used to purchase that App would come up, and the password that goes with that Apple ID would be required to do the update.
Hope that helps,
GB

In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to him.

In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to such person, but the only one shows up is the birthday. How to be able to show all those dates linked to people in the agenda in the iCal?
Thanks

Hi,
I sugggest you try my application, Dates to iCal. It is shareware with a 2 week trial period.
Dates to iCal 2 is a replacement for Apple's birthday calendar for iCal. It has a range of features to allow the user to choose what, and what not, to sync to iCal from Address Book.
As well as automatically syncing birthday dates from Address Book, Dates to iCal 2 can sync anniversary and custom dates. It can set up to five alarms for each date in iCal and can also set different alarms for birthdays and anniversaries. It allows the option of only syncing from one Address Book group. This application also allows for the titles of the events sent to iCal to be modified to the user's preference.
Best wishes
John M
As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Is there any way to make copies of the maser image in LR3?

Is there any way to make copies of the maser image in LR3?
I do a lot of sports and dance photography and I need a way to make multiple copies of an image to drag into different folders in LR3.
Example: One dancer may be on several teams and I need to make copies of the team photos to put in each dancers folder before I upload them to my E Commerce site so each dancer see's their team photo with their individual photos in the same folder online.
I know I can make virtual copies, but you cannot drag them to different folders as copies, it will move the virtual with the master.
If they would just let us hold ALT or any key while dragging to "copy" instead of "move", my problem would be solved.
For now I have to go into Windows, make copies ,then synch the folders again. Pain in the rear to do that.
Anyone have any experience here?
Thanks
ronchast

Ron,
I too need to make "Real Copies" of images and hate doing anything directly from the OS because of the chance that my LR catalog gets out of Sync with the actual images on the computer. So I make the copies inside LR with an export routine and then move the copies inside of LR with the normal drag and drop. Once the export preset is created it can be executed from the Library Grid by right-clicking on the image (or selected images) to make the copies. My settings are as follows in case you are interested:
This is the first time I have posted an image before and I am not sure if you will be able to read it or not. The contents from the export preset in the image above are as follows if that helps:
s = {
id = "3AF0E3D2-BC6A-4D53-A7BE-B7A6C4D673AC",
internalName = "Make Real File Copy",
title = "Real File Copy",
type = "Export",
value = {
collisionHandling = "overwrite",
exportFilters = {
exportServiceProvider = "com.adobe.ag.export.file",
exportServiceProviderTitle = "Hard Drive",
export_colorSpace = "sRGB",
export_destinationPathSuffix = "",
export_destinationType = "sourceFolder",
export_useSubfolder = false,
extensionCase = "lowercase",
format = "ORIGINAL",
includeVideoFiles = false,
initialSequenceNumber = 1,
jpeg_limitSize = 100,
jpeg_useLimitSize = false,
metadata_keywordOptions = "lightroomHierarchical",
minimizeEmbeddedMetadata = false,
outputSharpeningLevel = 2,
outputSharpeningMedia = "matte",
outputSharpeningOn = false,
reimportExportedPhoto = true,
reimport_stackWithOriginal = true,
reimport_stackWithOriginal_position = "below",
renamingTokensOn = true,
size_doConstrain = false,
size_resolution = 300,
size_resolutionUnits = "inch",
tokenCustomString = "RC",
tokens = "{{image_name}}_{{custom_token}}",
tokensArchivedToString2 = "{{image_name}}_{{custom_token}}",
useWatermark = false,
watermarking_id = "<simpleCopyrightWatermark>",
version = 0,
Let me know if you have any questions.
Jeff

Any way to make Mail.app receive before send?

Similar Messages

Maybe you are looking for