Any way to open port for all computers?!

Hey folks,
I'm using an Airport Extreme as the router for a small network. It's been performing fantastically.
But, something I can't figure out is:
Is there any way to open a port for all the computers I have hooked into the Airport?
I can of course open ports per internal IP address, but what I'd really like to do is just open up a slew of ports for all of the machines. This way I can leave them grabbing DHCP-provided, non-static IPs, but they can also get access to the services they need to.
Tried the old asterisk in the host IP field (like "192.168.1.*") but no dice. Actually I can't even find a yes or no answer on if this is even possible...
Thanks in advance!

Sorry, but the AirPorts do not support a feature to forward a port to multiple IP addresses; only multiple ports to a single IP address.

Similar Messages

Open ports for all in LAN

Hi, a few days ago I bought a wireless router WRT160n. I want to ask how to open some port for all in LAN(3 clients). For example all in LAN have PeerToPeer application for torrents. I want to open port for example 20202 for all. Now I open port from menu Applications & Gaming->Single Port Forwarding, but I must set port for each user IP address.
Can somebody tell me how to open port for all in LAN without to config for each computer?
Thanks in advance.

Hi gv. I read more about UPnP and the WRT160n User Guide. In section Administration>managment int wrote that UPnP is Enabled by default in my router it is corect. I Setup mu PeerToPeer(eMule) TCP/UDP ports to 20202 and check option "Use UPnP to setup ports". I test and close this port on my router configuration for my computer on "Single Port Forwarding", but in eMule the port is still block. Can you explain why it did not work. For UPnP it says that if Enable it allow users with Windows ME and XP automatically to gonfigure Router ports
Thanks in advance!
Best Regards.

Opening ports for Windows computers...

Hi Everyone! This is my first post on the official forums!
I am currently sharing my internet connection (ethernet) through my Macbook wirelessly to my windows PC.
It all works very well as long as just use port 80 for simple web-surfing but whenever i use programs (Steam and Bittorrent) that use other ports i don't seem to get a connection.
The firewall in my Macbook is turned off...
Thanks in advance!
MVH//Kalle from Sweden

Hi Kalle... & Welcome to the Discussions!
You might need to open ports on any Roiter the Mac is connected to, but you didn't mention such a thing...
http://docs.info.apple.com/article.html?artnum=106439
http://en.wikipedia.org/wiki/Listof_TCP_and_UDP_portnumbers

ACS 5.3 Dashboard - Any way to create Dashboard for all users?

I'm at the point of setting up admin access for engineers needing to have insight into the operations and status of our ACS 5.3 systems.
I'm curious if there's any way to create a Dashboard that can be applied to all admin user accounts? (perhaps a custom role?)
I've been able to customize the dashboard for my own account to show what is most relevant, but am unable to figure out how to apply this layout and setup to all other users.
Basically, I have a number of folks that need to see this data, but that I can't exactly count on to setup their own dashboards to show the important details. If there were some way to build a tab/dashboard/portlet, etc (whatver it may be) and have it apply to all users, that would save me TONS of work so that I don't have to login to each person's account and set things up for them.
For example, I want to have all users see a tab/dashboard that shows the applet "Live Authentications", but with the protocol already configured to display TACACS vs the default which is RADIUS.
Any thoughts?
-Chris

Chris,
I see you are looking for read-only access to Dashboard. Currently there is no way to force all Admins to use same Dashboard and all admins will have full control of the Dashboard.
Regards,
~JG
Do rate helpful posts!

Way to open ports for PS4?

Hello.
I am fortunate enough to have a NAT 2 most of the time, but occasionally I get NAT 3. Is there a way to open the ports for the PS4? Admittedly I have absolutely no experience with opening ports.
Thanks for your time, help, and assistance.

To open ports follow the info here.
https://discussions.apple.com/community/wireless/airport?view=documents
See doco on port mapping for v5 or v6 utility according to which you are using.. you will have to look up what ports need opening.

Do I need to open ports for NTP?

I just noticed that my hwclock was off by nearly 30 seconds. It's almost certainly due to the recent initscripts update.
As I was looking into resetting the clock, I found out that openntpd is deprecated so I've switched to ntp, configured the daemon, reset the time with ntpd -q, and started the daemon. The time is not accurate again.
I remember back when I first installed Arch I tried to set up ntp but it didn't seem to work, so I tried openntpd and stuck with that. I reached the conclusion that ntp required open ports, which I felt was unnecessary given that openntpd could do the same thing without open ports.
Now that I'm looking at it again, I can't find any definitive answer...
Do I need to open ports for ntp if I only want to sync the system that it's running on?

ISC ntpd (the ntp package) will open UDP 123 on all your interfaces regardless of what you do with it. It will work anyway even if you block this port in iptables, assuming that you're allowing responses to established traffic as usual - your outbound mobilization requests to your chosen servers will be enough to allow the responses, and the same with further traffic sent for the lifetime of ntpd. Using iptables like this is probably the easiest way to secure ntpd.
There's also some defense in depth you can do:
- run ntpd as non-root
- run it chrooted to some safe directory (really only makes sense when doing non-root as well, since root can break out of a chroot)
- apply ntpd's built-in access controls (see examples in ntpd.conf, and full docs in ntp_acc(5))
I accomplish the first two of these by chowning /var/lib/ntp (and any contents) to ntp:ntp (so ntpd can write ntp.drift there when non-root), by using a driftfile path relative to the chroot in ntp.conf, and by setting NTPD_ARGS="-g -i /var/lib/ntp -u ntp:ntp" in /etc/conf.d/ntp-client.conf.
For the third, I chose to not allow any remote traffic to initiate anything with my ntpd, with this /etc/ntp.conf:
server ac-ntp0.net.cmu.edu iburst
server ac-ntp1.net.cmu.edu iburst
server ac-ntp2.net.cmu.edu iburst
server ac-ntp3.net.cmu.edu iburst
server ac-ntp4.net.cmu.edu iburst
restrict default nomodify nopeer noquery
restrict 127.0.0.1
driftfile /ntp.drift
Note the two "restrict" lines. The first shuts out remote access of most kinds, and the second allows the local machine all the access that would also be denied to it as well otherwise by the first rule. Note also the driftfile path, relative to the chroot of /var/lib/ntp/.
With all these security features, ISC ntpd can be just as safe as openntpd.
The use of the "iburst" keyword on the server lines to recover more quickly from out-of-contact conditions is also quite nice, and not rude to the remotes like "burst" would be.
One of the nicest other features of ISC ntpd is that it's smart enough to notice when network state changes occur, like bringing a VPN up/down, changing routes, or switching from wired to wireless and back. openntpd tended to just lose connections in these cases.

Any way to open new browser window without using image maps?

Is there any way to open new browser window without using image maps? My code works fine in Firefox, but not in IE. There are 2 problems in IE: 1st is that the thumbnail images move up within their own borders & 2nd that when you click on an image it does open up a new browser window, but also redirects to the index page (in this case it's just a placeholder index page - the new one I've called index_new.html for the time being).
Here is the link:
http://www.susieharperdesigns.com/gallery_beads.html
Any help is greatly appreciated.

Your missing a value on the HREF. In your code you have this:
<area shape="rect" coords="-24,-9,106,144" href=" " onclick="MM_openBrWindow('gallery_bead1.html','','width=255,height=360')" />
</map></div>
and it should be this:
<area shape="rect" coords="-24,-9,106,144" href="javascript:void()" onclick="MM_openBrWindow('gallery_bead1.html','','width=255,height=360')" />
</map></div>
If you fix the code on all your beads, it should work.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

I have Safari on an HP desktop running Windows 7, 64-bit. When I want to clear the history from Safari, the "Reset Top Sites Also" button is always checked. This can cause problems. Any way to have it unchecked all the time?

I have Safari on an HP desktop running Windows 7, 64-bit. When I want to clear the history from Safari, the "Reset Top Sites Also" button is always checked. This can cause problems. Any way to have it unchecked all the time?

Welcome to the HP Forums Hinalover,
I see by your post that you are having issues with the print spooler on the Windows 7 computers.
I can help you with this issue.
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
Try running the Microsoft Fix It Tool to see if it will fix the print spooler.
Diagnose and repair Windows File and Folder Problems automatically.
You can also run the System File Checker to repair corrupted or missing files.
System File Checker: Run sfc /scannow & analyze its logs in Windows 7 | 8.
You might end up having to do a repair of Windows.
Please let me know the results.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Dsd files - any way to open?

dsf or dff formats - apparently aren't supported. Any way to open them in audition? Or will there be in the near future?
Thanks

Just FYI, there is quite a bit of music, mostly classical, being recorded in DSD and released as digital files, not only as SACD. In addition, a lot of catalog material originally recorded on tape (all types of music) is being remastered to DSD and released for download. In a quick search, I came up with about 500 titles, all from the last year or two, with more on the way. SONY, among others, has begun marketing home equipment capable of playing back DSD files; they also have all of their music archives (thousands of titles) in DSD, so if these start to be released in large numbers for download there will be no lack of material.
SACD is a proprietary closed format which can't be copied under normal circumstances. Probably one of the big reasons it didn't succeed outside of classical recording and in Japan, where it is still quite a viable format. There are though, about 8000 SACD titles available, and the number is still growing. The advantage of dsf and dff releases is that they are DSD without the copy protection, and can be manipulated, played back, and copied just like any other digital file.
As far as how it sounds, you'd have to listen for yourself. I think there quite a few people that can hear that DSD playback sounds different from SACD playback and also from PCM playback. There's no reason it houldn't, as the filtering used in recording (none for DSD in recording) and playback is different than PCM.

How to query opening balance for all customer or Vendor for an speci. date

Hi,
How to query opening balance for all customer or Vendor for an specific date?
Example:
put any date and query will show all customer/ Vendor that date opening/current balance.
Regards,
Mizan

Hi mizan700 ,
Try this
SELECT T0.[DocNum] As 'Doc No.', T0.[CardCode] As 'Customer Code',
T0.[CardName] As 'Customer Name',(T0.[DocTotal]-T0.[PaidSys]) As 'O/S Balance'
FROM OINV T0 INNER JOIN OCRD T1 ON T0.CardCode = T1.CardCode
INNER JOIN OCRG T2 on T1.GroupCode = T2.GroupCode
INNER JOIN INV1 T3 ON T0.DocEntry = T3.DocEntry
WHERE T0.[DocStatus] ='O'
AND
(T0.[DocDate] >='[%0]' AND T0.[DocDate] <='[%1]')
Regards:
Balaji.S

Is there any way to open a file with a .msi extension on my new mac?

I have Camtasia from the pc I was using. It has a .msi file extension for the installation file. Is there any way to open the Camtasia installation file with the .msi extension on my new Mac?
Thanks,
Jerry

That's a Microsoft program which requires Windows. You could run on your Mac if you install Windows on it.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows 7 or Windows 8. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusion and Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. A more recent comparison of Parallels, VM Fusion, and Virtual Box is found at Virtualization Benchmarks- Parallels 10 vs. Fusion 7 vs. VirtualBox. Boot Camp is only available with Leopard and later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Is there any way to open an .xlsb file in numbers?

Our ad department has recently upgraded their windows PCs, and it seems the new default for Excel to save is .xlsb (excel binary workbook). Is there any way to open this in Numbers, or is my only answer to go over to them again and again, to get them to resave in .xls or .xlsx?

jamilKC wrote:
Our ad department has recently upgraded their windows PCs, and it seems the new default for Excel to save is .xlsb (excel binary workbook). Is there any way to open this in Numbers, or is my only answer to go over to them again and again, to get them to resave in .xls or .xlsx?
Ask them to resave as .xls
If they are polite enough, I'm quite sure that they may change their default format to .xls.
Yvan KOENIG (VALLAURIS, France) jeudi 1 avril 2010 18:24:03

Error opening port for replicat

Hi Guys,
I m getting below, while sending statust on target.
GGSCI (PMS) 15>info all
program Status Group Lag Time Since Ckpt
MANAGER RUNNING
REPLICAT RUNNING REPYA 243:53:20 53:49:42
GGSCI (PMS) 16> send repya status
Sending STATUS request to REPLICAT REPYA ...
ERROR: opening port for REPLICAT REPYA (Connection timed out).
#cat REPYA.pcr
PROGRAM REPLICAT PROCESSID REPYA PORT PMS.7840 PID 26342
#telnet PMS 7840
Trying...
telnet:Unable to connect to remote host:Connection timed out
What could be issue ???

The server where Replicat is running is up? Can the server be pinged/telnet by another server? Can the source server connect anywhere else? Firewall? Network services running? Network troubleshooting 101.

Getting error 'opening port for MGR (Connection refused).

Hi Guys,
I m getting below, while starting replicat on target.
GGSCI (ggtarget) 16> start replicat RLOAD
Sending START request to MANAGER ...
ERROR: opening port for MGR MGR (Connection refused).
GGSCI (ggtarget) 20> view param mgr
PORT 7809
USERID orgg, PASSWORD orgg
PURGEOLDEXTRACTS /ggs/dirdat/*, USECHECKPOINTS
GGSCI (ggtarget) 21> view param rload
REPLICAT RLOAD
USERID orgg, PASSWORD orgg
ASSUMETARGETDEFS
HANDLECOLLISIONS
APPLYNOOPUPDATES
GETUPDATEBEFORES
reperror default, discard
DISCARDFILE ./dirrpt/rload.dsc, purge
MAP HR.TCUSTORD, TARGET HR.TCUSTORD;
MAP HR.TCUSTMER, TARGET HR.TCUSTMER;
from Source I could able to do the telnet to target...
What could be issue ???

Hi,
Error:
GGSCI (ggtarget) 16> start replicat RLOAD
Sending START request to MANAGER ...
ERROR: opening port for MGR MGR (Connection refused).
You can start Manager, but when you try to start Replicat, GGSCI gives me a connection timeout error
Solution:
GoldenGate uses a TCP/IP socket to communicate between local processes. When you issue a START, STOP, SEND, or other command in GGSCI, the command interface will try to open a local port for the process.
Here is how to find out which local ports these processes are listening on. In the dirpcs directory, there will be one file for each running GoldenGate process.
For Manager, the file name will be MGR.pcm.
For Extract, it will be <GROUP_NAME>.pce.
For Replicat, it will be <GROUP_NAME>.pcr.
These are text files that can be viewed by using cat or any equivalent command. For example, the MGR.cpm file content will read like this:
PROGRAM MGR PROCESSID MGR PORT sys1.4356 PID 60070
After the keyword PORT will be the local hostname and the port number that Manager is supposed to be running on. In the preceding example, the hostname is sys1, and the port is 4356.
The program (ggsci) tries to use that hostname to communicate to the process (Extract/Replicat/Manager) when the command is issued in GGSCI. If you get a timeout or connection-refused error on the command, that means GoldenGate could not connect to the local host. Most of the time, you should have no problem connecting to a local host, but when you have the wrong IP address or routine table configured in your TCP/IP settings, connection errors can happen.
To troubleshoot this, follow the steps below
1. Try to ping that host name from the OS shell to see if it goes to the correct IP address (which should be the one for the local system).
2. If the ping is successful, try to telnet to the Manager port on your local host. You will be able to see your telnet session connect if a Manager is listening on that port.
Here is an example:
shell>telnet
telnet> open sys1 4356
Trying 100.100.100.100...
Connected to sys1.oracle.com (100.100.100.100).
Escape character is '^]'.
3. If your telnet session times out or gets a connection-refused error, that means either the hostname is wrong or the port number is wrong.
If the ping to the hostname listed in the pcm/pce/pcr file fails, or if you cannot connect your telnet session to the port listed in the file(s), contact your network engineers to get the TCP/IP issue resolved.
Hope this information helps.
Thanks & Regards
Santhosh

I have 3-4 computers authorized on my apple id. These computers have either been replaced or formatted. Is there any way of de-authorizing these old computers?

I have 3-4 computers authorized on my apple id. These computers have either been replaced or formatted. Is there any way of de-authorizing these old computers?

Your Google must be broken?
No problem, let me do it for you:
http://support.apple.com/kb/HT1420?viewlocale=en_US&locale=en_US

Any way to open port for all computers?!

Similar Messages

Maybe you are looking for