Any way to play with Marvel without being in the beta program?

Hi - I tried using the search facility for FAQ and couldn't find anything. The only link to Project Marvel I can find indicates I need to register for the beta program. Is there any way to just play around with it without being required to develop a test application and other such stuff?
Thanks,
Doug

though you do need to register/sign_up to use project marvel, you don't necessarilly need to fully participate in the formal beta program. simply indicate in the section of the registration that says "Project(s) Description (describe what you intend to use this tool for)" that you'd like to play around with the tool. so long as you provide useful feedback if/when you encounter it, i'm pretty sure you should be good to go. as a bit of advice, though, creating a simple application or two from start to finish (with authentication and such in place) really goes a long way towards grasping the big picture. given that it can be a matter of minutes to create such a tiny app with marvel, it's hard to pass that big picture up.
Regards,
The Project Marvel Team

Similar Messages

Any way to reset system preferences without being able to see the screen?

I did something really stupid -- I'm running 10.5.8 on Mac mini with a 720p television as a monitor. The system rez seemed a bit too low so I wanted to change it. I went to System Prefs, Display and before I even picked a rez, a window popped up and read (paraphrasing) that a low system rez, (it gave a number, I think it was 640x480, could have been 800x600), might not be compatible with the software (OS?) -- so I clicked "Okay" unwittingly, thinking it telling me for my info and not that it was on the verge of applying that rez when I clicked "Okay". I got one brief glimpse of the screen as the rez changed -- then it went to black.
I tried booting from the install disc but without re-installing the OS I couldn't get to the System Prefs.

Yes, the screen was visible when booted from the Install Disc. Safe Boot would have been my next try but I couldn't remember what key to hold. Thanks for the reminder. My impatience, however, led me to take the easy, but sure, way out by re-installing the OS.
Of course, being on a hot streak, I reinstalled from the original discs (Tiger, but there was no designation as such on the actual disc), forgetting that I had upgraded to Leopard, so I moved backwards in the OS category and in doing so found that Tiger takes up about 9 more gb then Leopard which I really need. And the app for the project to which I was dedicating that mini -- VHS to .mov copying -- informed me that it didn't work with "the current OS", despite the mfgr (Roxio) listing 10.4 as a useable OS.
I'm going to re-reinstall the OS -- this time with Snow Leopard with a complete hd wipe (hoping to get back a lot of disc space) and be extra, extra careful the next time I attempt to change the screen rez. I kinda wish I had been patient enough to strive for a solution to my original problem, especially since haven't actually saved any time by reinstalling. I think I'll attempt to recreate the problem if I can since I'm going to reinstall again anyway and try the Safe Boot. If it works it would certainly be worth knowing.

Is there any way for play/stop to NOT apply to the metronome? [mainstage 2]

I have EXS24 samplers triggered by drum pads, but like to be able to set one pad to [Play/Stop] so I can stop the samples on the fly. (in case I make a mistake or something) Problem is, I want to send the metronome to my drummer (via a different output on my interface) but I DON'T want [Play/Stop] to stop the click. Is there any way to get better control of the metronome? Does anyone with mainstage 3 know if this is an option? Can I re-wire it with logic 9 and run a click out of logic? Can't seem to get mainstage and logic to work together... Just need my click to run independently.

What you may try is to replicate your base map but take the point theme out of its definition. Then create a second tile layer for the new base map. You can add both tile layers to the client (but set only one of them to be visible). Then simply switch the tile layers' visibility on/off based on user turning on/off the point theme. The built-in Oracle Maps tutorial #22 (Multiple Base maps) has some sample code you might be able to re-use.
thanks
LJ

I have just lost my Ipod touch gen 5 i've tried using the findmyiphone app but it seems like it need to have a wifi signal but they need to get into my ipod first to connect to internet is there any way i can track it without connecting to the internet??

is there a way i could find it if it connected to their computer??

Change your iTunes (Apple ID) password along with any other password that was stored in the iPod. If any passwords are associated with credit cards, contact the CC company and get your card replaced (with a new number). If any passwords are associated with a bank or any other savings institution, contact them also and discuss approprate action with them.
The "Find my..." function is pretty much useless if the device is in the hands of a thief. All that is necessary is for the thief to connect to any computer with iTunes and "Restore as new."
The only real protection you have is with the personal information on the device rather than the physical device itself. This requires action before the device is lost/stolen. If the device has significant personal information, it should have a strong 8-digit (or longer) password AND be configured for automatic wipe in the event of ten consecutive incorrect password entries.

Is there a way to turn on icloud without being near the device

My ipod was recently stolen. I don't have icloud turned on so I have no way to trace it. Is there a way I can trace it without turning it on or is there a way to turn icloud on from a computer?

You would have needed to enable 'Find My iPod' on your iPod Touch before it was lost in order to be able to locate it. Failing that, you cannot do so. (It would also have to be on, not wiped, and able to connect to a network - any competent thief will have wiped it.)

HT1420 Is there a way I can de-authorize without being on the pc or laptop etc?

I don't think I have/know what my authorized pc's are anymore so is there a way I can do it without taking all 5 off? Butttt, If i have to do all 5 can I do it and it won't blank all my info etc?
Cheers

viva jakers wrote:
... If i have to do all 5 can I do it and it won't blank all my info etc?
No Content will be affected...
If you no longer have, or access to, the computer(s) you want to deauthorise,
Log in to iTunes, go to "view your account info" on the itunes store, deauthorise all five, (Please Note: this can only be done Once every 12 months) and then re-authorize your current Computer(s) one at a time.
Authorise / Deauthorise About
http://support.apple.com/kb/HT1420

Is there any way to use zen touch without being an admin on the comput

I looked for weeks and weeks with no solution. All I want is the simple
interaction between my 20GB zen touch and a pc with which I have
no admin priviliges. If I managed to get the files (nomad explorer/driver)
somewhere else would simply copying them over be enough to get it to work.
Or is it hopeless and you HAVE to be an admin? :smileysurprised:
Please helpMessage Edited by myname on 05-24-2005 03:8 PM

It works fine on my laptop but you know the way it is at work.
I thought I'd be able to download files and bring them home
to my laptop on the zen touch. ?260, 20GB and I can't even use
it to transfer files. Feck that :smileyvery-happy:

Hi, my 2 kids have 2 different ipod touches all under my itunes account. when they play the same game/app, it sees them as one player. is there any way to separate their progress without giving us all different itune accounts?

Hi, my 2 kids have 2 different ipod touches all under my itunes account. when they play the same game/app, it sees them as one player. is there any way to separate their progress without giving us all different itune accounts?

You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse

HT204266 I erase all application of my iphone 4 with erase restore and now it's in restore mode. Now is there any way to restore my iphone without backup. Please help me. I have no need my previous file i just want my i phone ok and work smoothly as new p

Hi,
I erase all application of my iphone 4 with erase restore without any backup & i also lose the product serial number. Now it's in restore mode. Now is there any way to restore my iphone without backup. Please help me. I have no need my previous file I just want my iphone4 ok and work smoothly as like new ipone justlike i bought it at first time. I can't restore it. So Please help me to solv this proble.

See Here > without the Backup > http://support.apple.com/kb/HT4137

Is there any way to reset security questions without a vocal contact with Apple?

Yesterday I've tried to buy a song from iTunes, and it's surprised me that I've been ask to answer some security questions I have made long time ago and unfortunately I can't recall the answers of these security questions, I've tried to reset the security question by this site applied.apple.com and the reset link is not appearing under the answer box!!
Is there any way to reset security questions without making a vocal contact with Apple ?
Best Regards,

Click here and ask. If they say that there isn’t, and they probably will, accept that.
(122113)

With just ONE inatentive sweep of my finger one page of my note was disappeared! Is there any way it can be recovered without using the help of iCloud backup?

1. With just ONE inattentive sweep of my finger one page of my note disappered. Further more, the same page in my iPad was deleted automatically too! How could this happen? Is there any way it can be recovered without using the backup feature from iCloud? The data is vey important to me?
2. I havn't connect the power code to my iPad yet, the backup copy in the iClout was before the accident as I checked in iPad. Is there any way that I could open my notes in iCloud backup so that I can copy the missing page and move back to my iPad and iPhone?
Thanks a lot for any help!
Xueyu

Sorry, no. The only way to restore this note is to restore from a backup that contains it.

Are there any way to play movie from hard disc uploaded with java player?

I found quicktime player can export the movie as webpage versions, uses java to play the movie instead of quicktime player.
How can I do the same with iweb? From the webpage which quicktime generated said should insert some code to the head of page and something else, but how do I insert those codes to the page I create with iweb?
It said :
"To make your media viewable on the Internet, your media assets (movies, poster image) must be placed on a publicly accessible server.
The URL parameters must be modified if your media assets are served from a different location than your web page.
The movie URL parameters must always point to the reference movie (carsmoke.mov) rather than a source movie.
The reference movie must be kept in the same folder as the source movies.
Source movie names cannot be changed, but you can change the name of the reference movie (remember to change it in the HTML code as well).
Please note, to properly validate as XHTML, the <style> tag and the first <script> tag should be placed within your page's <head> tag."
Use this code in the <head> of your web page:
<script src="http://www.apple.com/library/quicktime/2.0/scripts/prototype.js" language="JavaScript" type="text/javascript"></script>
<script src="http://www.apple.com/library/quicktime/2.0/scripts/qtp_poster.js" language="JavaScript" type="text/javascript"></script>
<link href="http://www.apple.com/library/quicktime/2.0/stylesheets/qtp_poster.css" rel="StyleSheet" type="text/css" />
Use this code in the <body> of your web page:
" <<a href="carsmoke.mov" rel="qtposter">
<<img src="xxx.jpg" width="120" height="50" />
<</a> "
(I put < into << so it will not execute in this page...)
How to do these with iweb?
Message was edited by: kosmo.yin
Message was edited by: kosmo.yin

kosmo.yin wrote:
Are there any way to play blue ray disc on imac 27 under OSX system ?
Wonder what kind of software and blue ray player need to buy to play it.
Yes there is. See the link below:
http://eshop.macsales.com/shop/optical-drives/superdrives/

Recorded a video in portrait mode and want to switch it to landscape mode is there any way else to do it without useing quicktime pro....hope apple fixes this in ios 7 the video should come out in landscape regardless of the way you hold your phone

is there any way else to do it without useing quicktime pro....hope apple fixes this in ios 7 the video should come out in landscape regardless of the way you hold your phone or if you start in portrait and go into landscape while recording

You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse

Is there any way to play all files in a directory by one url?

Hi all,
I am testing fms this days, I have put all my files(such as 1.mp3,2.mp3...n.mp3) in my directory.
I can play single file fine with url like this:
rtmp://localhost/mp3/mp3:x/2
but i want to know is there any way to play all files in my direcotry?
for example, user click the play button, the player(smp) automatic plays all files in the directory, link windows media server.
Should I use playlist? Or there is another better way?
Thanks a lot.

Hi,
FMS do not directly take a directory to play files, the file names have to be fetched some way (through script if needed) to make a playlist and then the play command needs to be repeated as many times.
Thank you !

Any way to export with multiple presets at once?

Hi! Is there any way to export with multiple presets at once? I do a lot of product photography, usually clients send me around 5 to 10 pieces to photograph, and from each photo requires to be exported to about 7 different formats and sizes for different uses. I have a preset for each export, but this requires multiple clicks per export, select the preset, the destination folder, etc..... and at the end I end taking about 1 hour to just export files when if I could just select 1 time a folder of presets and the destination folder just once, then it will take no time to get all oft those exports.
Thanks!

Some of those other photographers have assistants they can task with doing the drudgery.
I would describe what you're wanting scripted multiple exporting, not multiple export presets, because multiple-exports don't necessarily rely on presets, just initiating an Export and clicking on various things for each one.
I assume you have a preset set for each of the 7 format-size-uses variations, and then most of the time consuming part is setting the Choosing the destination folder that gets mirrored to DropBox? You can copy/paste most of the path into the Folder address area after clicking Choose.
Without knowing what your master-photo folders and dropbox-mirror folder names and organization are it's hard to know if you've thought of all the shortcuts you might use or if things are organized in the most efficient manner.
If you're on Windows, maybe something like AutoHotKey macros would help with what you're doing.

Any way to play with Marvel without being in the beta program?

Similar Messages

Maybe you are looking for