Any way to preview document for web at 72dpi?

I do mostly work for print, but today was asked to save a web graphic created by one of our designers in InDesign. Unfortunately, our designer created something that looks good on screen, but when saved to a png or jpeg, is completely unusable (type too small, unreadable). The file was created at the proper dimensions (95px x 150px), but since he only viewed it @ high resolution on screen and printout, and didn't view it @ the actual pixel dimensions, we now have to completely recreate this job.
Is there a way to preview the current document in InDesign on screen at a specific resolution, so that he will know what the final product will look like without having to export it?

If you are using CS6 choose web intent when you create a new document and set the Page Dimension to the desired pixel dimensions. Then double click the Magnifier tool to set the view to a 1:1 screen to pixel ratio.
If you are using an earlier version set your rulers to pixels or points and set the view at 100%

Similar Messages

  • Any documents for web interface builder?

    any documents for web interface builder?

    Hi Saida,
    You can refer the following link for the web interface builder wrt SEM BPS:
    http://help.sap.com/saphelp_sem60ep1/helpdata/en/0a/242537cedf2056e10000009b38f936/frameset.htm
    Hope this helps.
    Please revert incase of any clarifications and reciprocate points if helpful.
    Regards,
    Poonam

  • Is there any way to use a For Each Loop for each property of an User Defined Type?

    Is there any way to use a For Each Loop for each property of an User Defined Type? That would be very handy!
    Jorge Barbi Martins ([email protected])

    Alas, no, not in VBA.
    Regards, Hans Vogelaar (http://www.eileenslounge.com)

  • Is there any way to Authorization Management for Material Components?

    Hello every body
       Is there any way to Authorization Management for Material Components? 
       For example  i want to create , delete , modify  Material Components,how i can Authorization Management ?
       Enhancement or IMG or other ways?
                                                                                    thanks

    Alas, no, not in VBA.
    Regards, Hans Vogelaar (http://www.eileenslounge.com)

  • Is there any way to raise alerts for stock outages in inventory

    Is there any way to raise alerts for stock outages in inventory

    You can use the Check Material Shortages attribute in the Org items under Inventory tab. Oracle will trigger shortage alert notifucations for the checked items. This works in the conjuntion with the Shortage Parameters defined at the Inv ORg level (these parameters are nothing but what business wants to consider as a shortage in WIP and OM). You can notify the cmp planner/buyer , assy planner/job creator..

  • I bought an iBook  book thinking it was in English.... Turns out its in German any way I can return for a refund?

    I bought an iBook  book thinking it was in English.... Turns out its in German any way I can return for a refund?

    How to report an issue with Your iTunes Store purchase
    http://support.apple.com/kb/HT1933
    iTunes Purchase Problems: How to Report a Problem to iTunes Support
    http://tinyurl.com/7tscpa7
    How to Get a Refund from the App Store
    http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
    Getting Refunds for your iTunes Store Purchases
    http://www.labnol.org/software/itunes-app-store-refunds/13838/
    Canceling a Digital Subscription
    http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/

  • Elements 13 : 1. Is there a way to stop the automatic proposal for exemption? 2. Is there any way or an update for the manipulation of the color curves like in Gimp or Paintshop?

    Elements 13 : 1. Is there a way to stop the automatic proposal for exemption?
                           2. Is there any way or an update for the manipulation of the color
                               curves like in Gimp or Paintshop?
                                                        Dankeschön für jede Antwort die weiter hilft!!

    Hey Rich,
    It is true that you cannot add more than 250 plots to a 2d-axis graph in the REPORT.  One work around is to have the graphs stacked on top of each other and plot 250 to one graph and 250 more to another graph.  I am including a TDR (you have to unzip it) file that has 12 2d-axis stacked on top of each other.  Most of the properties have been made invisible through the graph properties.  You can still see the legends however.  One caveat to this is that you will have issues accessing the different graphs.  You have to do it from a VBScript.  The following line of code worked for me:
    Call GraphObjOpen("2DAxis" + Str(NewAxis))
    Where NewAxis is a variable that defines which graph I want to look at.  You would of course have to loop through the graphs as you add data. 
    Cheers,
    jigg
    CTA, CLA
    teststandhelp.com
    ~Will work for kudos and/or BBQ~
    Attachments:
    12PlotStack.zip ‏12 KB

  • With Firefox 6, is there any way to allow cookies for the browsing only and then erase cookies when you close the browser?

    With Firefox 6, is there any way to allow cookies for the browsing session and then automatically erase cookies when the browser is closed? On older versions this option was available.

    For more help, see the '''[[Tabbed browsing]]''' page.

  • Generate Preview - Save for Web Crashes Photoshop

    Ok so when using Photoshop CS3 for web use i usually save for the web and preview in firefox, Now i had a few issues with photoshop, and so reinstalled my system, However since this now when i go to save for web, then preview image, Photoshop freezes during the Generate Preview.
    Any Help
    Cheers
    Alex

    Thanks Chris,
    Here is the latest crash details from Event Viewer, it also crashes intermittently when I open documents, this is a crash from opening a document today.
    Faulting application name: Photoshop.exe, version: 14.0.0.0, time stamp: 0x5176451b
    Faulting module name: ntdll.dll, version: 6.1.7601.18205, time stamp: 0x51dba4e7
    Exception code: 0xc0000005
    Fault offset: 0x0000000000027b0b
    Faulting process id: 0x2fa4
    Faulting application start time: 0x01cea063426c74fe
    Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Photoshop.exe
    Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
    Report Id: 715dd1e4-1044-11e3-8c24-7c05070d23cd

  • Resize a Document for web Use

    I looked online on how to reduce file size od an .fla file for use on the web but not very clear. I have an .FLA file that is 800X600 px.  when I publish it, I reduce file size, audio to mono etc, and I am getting 1.8mb file, way to large for web use. I tried an swf and flv file but same results. I need to reduce the entire document. I read to use the onion skin the highlight everything then resize but I have over 5,000 frames in my movie. Can someone explain in detail, how to highlight all of the frames in the movie, and then reduce the file to say 400 X 300 px? I am able to drag the onion skin but only to the edge of the viewable document then I must scroll over and repeat the process. there must be an easier way to highlight all frames in the movie then resize the whole thing. Any help would be appreciated.

    I do not think you understand the question. Here is an answer I got off another forum but do not quite understand how to implement.
    If you want to resize everything, a quicker way would be to select all frames (select the onion skin tool) and then resize everything to fit the new canvas size. That way, every frame of your animation will be reduced at once.
    Kglad,
       Does that make sense? How do you get the onion skin to select every frame in the animation?

  • Which way to get image for webi report?

    Hi,
    I have to add image to webi report. So any way is there for adding image for webi intelligence.

    check this thread:
    Adding an image (logo) to webi report

  • Best way to preview AIR for Android projects for different devices?

    So if I am developing an AIR for Android app, is there a good, simple way to preview the app on any android device? I have installed it on my phone of course, but is there a simulator/emulator of some sort available so we can see how it would look on both an Android phone and a tablet? Thanks in advance to anyone who can help!

    DPI aside, you can just set your resolution on the project to the target devices resolution to preview how it will look. While vectors will render much smoother on the device (higher DPI), it's a very easy way to target various resolutions for testing.
    If you have the full CC suite you might want to consider using Flash Builder 4.7 which has many different device presets and allows you to create your own presets to mimic tablets and phones. It really depends how complex your project is to move over to FB.

  • Any way to modify document safely?

    If you extend AbstractDocument (at some level), and you want to write a method that does a whole lot of operations on a document at once...like cutting, pasting, changing attributes, etc.. in one method call, is there ANY way to be able to do this safely (without the chance of another thread changing the document while you're working on it.)
    You can't use readLock() obviously, you also can't use writeLock() since all the lower level methods (that you DEPEND on) also use writeLock() before modifying the document, and calling writeLock() from a thread that already has the lock throws an exception.
    You can't control all edit paths since you don't have access to the undo stuff, otherwise you could add your own level of locks.
    Why in the world was AbstractDocument designed this way? It makes it virtually useless to extend it for functionality since all the functionality is effectively confined in AbstractDocument.

    Why "obviously"? The JavaDoc says:
    @exception IllegalStateException thrown on illegal lock
    attempt. If the document is implemented properly, this can
    only happen if a document listener attempts to mutate the
    document. This situation violates the bean event model
    where order of delivery is not guaranteed and all listeners
    should be notified before further mutations are allowed.
    So if you're getting the exception, you're doing it wrong.

  • Is there any way to display document page numbers and section page numbers at the same time?

    Hi, I have different sections within my document starting the page numbering at 1. Besides the section page numbers I would also like to display the actual document page numbers in the header (eg. you are on page 10 of the document and page 4 of the section). Is there any way to do that? Thanks

    You can maybe use the Find/Change
    Command+i
    See if that can work for you.
    But like Steve said it is good practice to use Paragraph Style whenever you have lots of Type, I just get lazy sometimes.. lol
    Thanks

  • ACS 5.3 Dashboard - Any way to create Dashboard for all users?

    I'm at the point of setting up admin access for engineers needing to have insight into the operations and status of our ACS 5.3 systems.
    I'm curious if there's any way to create a Dashboard that can be applied to all admin user accounts? (perhaps a custom role?)
    I've been able to customize the dashboard for my own account to show what is most relevant, but am unable to figure out how to apply this layout and setup to all other users.
    Basically, I have a number of folks that need to see this data, but that I can't exactly count on to setup their own dashboards to show the important details.  If there were some way to build a tab/dashboard/portlet, etc (whatver it may be) and have it apply to all users, that would save me TONS of work so that I don't have to login to each person's account and set things up for them.
    For example, I want to have all users see a tab/dashboard that shows the applet "Live Authentications", but with the protocol already configured to display TACACS vs the default which is RADIUS.
    Any thoughts?
    -Chris

    Chris,
    I see you are looking for read-only access to Dashboard. Currently there is no way to force all Admins to use same Dashboard and all admins will have full control of the Dashboard.
    Regards,
    ~JG
    Do rate helpful posts!

Maybe you are looking for