Any way to re-try to connect when connection fails

Hi
I developed SSIS 2014 packages importing data from MySQL to MS SQL 2014.
It is scheduled to run every 3 hours and sometimes it fails to connect to MYSQL (no problem with MS SQL) and it is always ok in the next run. As it is always ok in the next run, I think there is nothing wrong with the package itself. I believe it is a temporary
network issue.
To overcome it, I want the package to re-try to connect in every 30 seconds (or 1 min) for the next 5 times.
Is there any way to do this in SSIS 2014? Below is the screenshot of .Net MYSQL data connector I am using. I thought there might be something I can do in there but can't figure it out. I don't think there is a option to do it.
Any suggestions?

Thank you.
I will try it out..
If its executing the package from a job you can set retry attempts inside job step properties so that it will try it again after the first failed attempt. You can give a number based on how many times you want to retry it and also define a retry interval
to impose a delay betweeb two consecutive retries.
see
http://sqldbpool.com/2014/06/01/how-to-rerun-the-sql-agent-job-step-automatically-in-case-of-failure/
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Similar Messages

I do not like inbox search and want to use google but i cannot find any way to remove inbox--in fact when i search for it to remove you would think it is not there--but it is and i cant get it off. anyone know how?

Question
i do not like inbox search and want to use google but i cannot find any way to remove inbox--in fact when i search for it to remove you would think it is not there--but it is and i cant get it off. anyone know how? edit
Details

What you should see on a restart is a black screen followed by a screen with the Apple (at which point you let go of the two buttons). There is no progress bar, just the Apple. The Apple will stay there for 15 seconds or so, then the "Slide to Unlock" screen will redisplay.
But, I don't think the reset will fix it for you. I just tested it, and it comes back on with the zoom still on. The only way to get it to zoom out is the tapping with the 3 fingers.
I said to double-tap....MY BAD! You need to triple-tap with three fingers!
Try that and see if it will display the zoom menu for you, or if it will zoom back out.
Cheers,
GB

Is there any way to resize already loaded preview when widget is resize?

Is there any way to resize already loaded previews when panel widget is resize? Actually, I have already a lot of preview images loaded on my preview panel's widget. when my preview panel is resize, is there any way to resize already loaded preview images without creating new preview images. ErrorCode CMPSImageListDataView::CreatePreview( const IDFile& previewFile, uint32 width, uint32 height, uint8 backGrey ) { InterfacePtr<IPMStream> fileStream( StreamUtil::CreateFileStreamRead(previewFile) ); if(!fileStream ) return kFailure; InterfacePtr<IK2ServiceRegistry> serviceRegistry(gSession, UseDefaultIID()); if(!serviceRegistry) return kFailure; int numHandlers = serviceRegistry->GetServiceProviderCount(kImportProviderService); for (int i = 0; i < numHandlers; i++) { InterfacePtr<IK2ServiceProvider> provider( serviceRegistry->QueryNthServiceProvider(kImportProviderService, i)); InterfacePtr<IImportProvider> importProvider(provider, IID_IIMPORTPROVIDER); if (importProvider && importProvider->CanImportThisStream(fileStream) == IImportProvider::kFullImport) { InterfacePtr<IImportPreview> preview(importProvider, IID_IIMPORTPREVIEW); if(preview) { bool16 reallocateNeeded = kTrue; if( (this->m_fCachedImHeight == height) && (this->m_fCachedImWidth == width)) reallocateNeeded = kFalse; if(reallocateNeeded) { this->DeleteBuffers(); m_fpCurAGMImage = new AGMImageRecord; memset (m_fpCurAGMImage, 0, sizeof(AGMImageRecord)); m_fpCurAGMImage->bounds.xMin = 0; m_fpCurAGMImage->bounds.yMin = 0; m_fpCurAGMImage->bounds.xMax = width; m_fpCurAGMImage->bounds.yMax = height; m_fpCurAGMImage->byteWidth = 3*width; m_fpCurAGMImage->colorSpace = kAGMCsRGB; m_fpCurAGMImage->bitsPerPixel = 24; m_fpCurAGMImage->decodeArray = 0; m_fpCurAGMImage->colorTab.numColors = 0; m_fpCurAGMImage->colorTab.theColors = nil; this->m_fDataBuffer = new uint8[((m_fpCurAGMImage->byteWidth) * height)]; ASSERT(this->m_fDataBuffer); m_fpCurAGMImage->baseAddr = static_cast<void *>(this->m_fDataBuffer); this->m_fCachedImHeight = height; this->m_fCachedImWidth = width; } ::memset(m_fpCurAGMImage->baseAddr, backGrey, (m_fpCurAGMImage->byteWidth) * height); if (m_fpCurAGMImage->baseAddr) { AcquireWaitCursor busyCursor; preview->Create24bitRGBPreview( (uint8*)m_fpCurAGMImage->baseAddr, width, height, fileStream, kTrue ); m_fCurImageSysFile = previewFile; return kSuccess; } } } fileStream->Seek(0,kSeekFromStart); } return kFailure; }

Really Thanks!! T Schneider How can I do that matrix? Would you mind....? PMReal imageWidth = ( m_fpCurAGMImage->bounds.xMax - m_fpCurAGMImage->bounds.xMin); PMReal imageHeight = ( m_fpCurAGMImage->bounds.yMax - m_fpCurAGMImage->bounds.yMin); PMReal xOffset = frame.GetHCenter() - imageWidth/2; PMReal yOffset = frame.GetVCenter() - imageHeight/2; gPort->translate(xOffset, yOffset); InterfacePtr<ITransform> iTransform(this, IID_ITRANSFORM); PMMatrix theMatrix = iTransform->GetInnerToParentMatrix(); .??????????????????????????????. ASSERT(m_fpCurAGMImage); gPort->image(m_fpCurAGMImage, theMatrix, 0);

Is there any way to make an iPad3 connect to the internet in an Extended Verizon area?

Is there any way to make an iPad3 connect to the internet in an Extended Verizon area?

If you have the prepaid 3G account, no. The prepaid service, the kind activated directly from the iPad only works on Verizon's own network. You'd need to change to the month-to-month postpaid service to roam on the extended network. Call customer service about changing it over. You will need to do a credit check but there is no contract.

I have a spelling app that is stuck on the screen - it doesn't have any way to close it out, and when I split the screen and go to "Finder" to remove it, it says that it can't, because the program is still open. Please help.

I have a spelling app that is stuck on the screen - it doesn't have any way to close it out, and when I split the screen and go to "Finder" to remove it, it says that it can't, because the program is still open. Please help.

Paul,
I'm sure this is the correct answer, but just switched to Apple, so am just an apple seed at this point! :~)
How do I get to the Apple Menu?
Thanks!
KL

Is there any way to trace my session even when i forgot to fire spool

Is there any way to trace my session even when i forgot to fire
spool [file name] .................

No, not as fa as I know.
Traces of a session and spool are not related.
You need to set an audit trail to trace a session.
Spool simply spools to a file your work in SQL*Plus.
Hope this Helps

Any way for iPhoto to NOT launch when iPhone connected?

Hey gang-
Is there any way to configure iPhoto to NOT launch every time my iPhone is connected to my iMac? I understand why it does it- because there are photos on my iPhone Camera roll- I get it. But I would love for it to NOT launch iPhoto every time. I know I can use Image Capture to tell iPhoto not to launch for ANY camera, but that's overkill. I just want iPhoto to not launch when my iPhone is connected. Is there maybe an app or a terminal command that could configure that?
Thanks!
Kupe

roaminggnome wrote:
Sure. Go to preferences and select do nothing when a camera is attached.
This is the way to do this. As you know, it will not open for any camera.
These are your choices. Sorry.
Thanks- at least I know I wasn't missing something.
Okay- how about this? Is there an app that would enable me to move my photos off my Camera Roll and organize them separately? That might solve the problem of iPhoto seeing them.
Thanks!
Dave

Is there any way to popup a dialog box when user try to create a new folder?

Hi
I want to add a pop up dialog ,using Flex custom UI dialog, when use click "New Folder" in Adobe Bridge ? Then user can input folder name in this dialog.
Or I want to put this way, is there any way to display Flex custom UI dialog and get user's input in my CreateDirectoryHandler implementation?
The Adobe Drive SDK doesn't elaborate clearly about how to interact with custom UI dialog.
Thanks a lot!

Hi jmc,
             See the links below.This will be helpful to you.
             http://forums.ni.com/t5/LabVIEW/A-picture-as-a-dialog-box/td-p/236851
             http://forums.ni.com/t5/LabVIEW/Dialogbox-with-user-input-and-image/td-p/1601214
Thanks as kudos only

Iphone 3GS was dropped and will not turn on or respond to USB connection. Is there any way to extract the data off when it is not responding so that I can restore to my new phone?

The phone is physically intact, but you can see the LCD is cracked behond the glass. I have tried plugging it in, tried putting it on the charger, and resetting it using the off and home buttons, bit response. I don't need the phone to work, but I do need to be bale to back it up in order to restore to the new phone. Is there any way to extract the data or back up the hard drive without repairing the phone? Just curious what my options are before I spend cash trying to fix the phone and find out there was another way to get the data. Any thoughts here or should a good repair shop being able to create a backup somehow?

Im not going to be much help because I don't know of anything else to besides take it somewhere that fixes electronics and see if they can get it off some how maybe if you take it to an apple store they can do something to get your information.

HT1414 is there any way to track down my iphone when i have lost it?

I lost my iphone and i have the "find my iphone" app and thought that it may work from my mac but I am not finding a way to do that, is there any way to track down my iphone from my mac?

On your Mac, login to iCloud.com, & try to locate your phone. This requires that Find My Phone be setup/activated, on your phone, before you lost it. It also requires your phone be turned on & connected to the Internet. There is no other way to locate a lost iPhone, other than physically looking for it.

Is there any way to see what Guest connections are active?

The DHCP reservation popup only shows connections with full access. I can't see any way to see who/what is connected using a Guest logon. Is there any way to do this?

You can browse it a little more easily with TextWranger. You can also search it:
http://homepage.mac.com/bagelturf/aparticles/library/libtw/libtw.html
See what happens when you restore a vault:
http://homepage.mac.com/bagelturf/aparticles/vaults/vrestore/vrestore.html
It actually renames your existing library and creates a new one.

Any Way to Automate a Bluetooth Connection to a Specific Device?

I have 3 Magic Mice that I keep in three different work areas where I use my late 2010 MacBook Air. All mice have already been paired with the MBA.
Sometimes when I boot up in a different location, the computer will quickly initiate a connection with the Magic Mouse in that location. Other times, I have to manually use the Bluetooth menu in the finder to initiate a connection with that mouse.
Is there any way to automate (Applescript, Automator, Terminal Command within an Applescript, Keyboard shortcut, etc.) a connection to a Bluetooth device that has already been paired with a Mac?
Thanks.

Barry,
Thank you. When I transferred all my info from my previous computer to my MacBook Air, I ended up deleting all my Bluetooth preferences because of some issues. I thought I made my Magic Mice favorites again, but I didn't. Hopefully that will make a difference. I wouldn't have checked without your reply, so THANK YOU.
Scott

Is there any way to schedule an Internet connection reset?

Hello.
I live in a three-story house and have a Wi-Fi network set up using a Time Capsule and a couple of AirPort Express units. The Time Capsule, which is connected to the modem and is the initiator of the network, is on the second floor and there’s an AirPort Express each on both the first and third floors.
In India, we do not have the luxury of high speed unlimited access to the Internet. We can either opt for a 2Mbps connection (yeah, +scorching fast+, I know) that is capped at 2.5GB and allows unlimited access between 02:00 AM and 08:00 AM each day, or a 512Kbps unlimited connection.
Right now, I’m subscribed to the latter, but I made the mistake of traveling to the USA recently and, after having gotten used to the 16Mbps speeds for a month, I just cannot tolerate the incredibly slow speeds anymore.
Therefore, I’m thinking of switching to the 2Mbps connection. Since I download a lot of stuff though, I need to find a way to have the Internet connection automatically disconnect and reconnect at 02:00 AM and then get disconnected at 08:00 AM. Is there any way to get this done?
Putting my Mac to sleep and have it automatically wake up at 02:00 AM won’t work because the Internet connection will still remain connected on the Time Capsule and I will still get charged for the nighttime downloading. Is there any way to have my Time Capsule do the job for me—some Automator script or something, perhaps?
Any help would be greatly appreciated. Thank you.

How would that help though? I need the Internet connection to be reset, so that a new session starts after 02:00 AM, which will then be counted among the happy hours and won’t be chargeable. Restricted my Mac from accessing the wireless network is not the solution here.
Thanks for trying to come up with a solution though. Do let me know if you think of any other alternative.

Nokia 1020 - any way to get an internet connection...

There doesn't seem to be any way to get networking via BT.
As a possibly separate issue, I can connect to my Nokia 808 over BT and they pair up OK, but the 1020 doesn't see any network, dial-up or any other service like that in the 808.
Every windows laptop and even a win8.0 Lenovo tablet can connect to the 808 over BT, and all but win8.x devices can also do it over wifi (Joikuspot). Why can't the win8.1 Nokia phone do this?

In that case, what methods *are* available on the 1020 for getting an internet connection, other than using
- built-in GSM/3G/4G, or
- built-in WIFI (infrastructure mode only)
Can one do it via USB?
Why is adhoc WIFI or bluetooth insecure, for a personal temporary internet connection, from another device, used typically while travelling and used to make sure that roaming costs are contained within the one device on which there is a decent roaming data package?
Currently the only way I see is a 3G-WIFI modem (e.g. the E585) with a locally puchased data SIM inside it, but such deals are available only in some countries in Europe. They also tend to be really difficult to purchase e.g. in Greece you spend an hour or two in a phone shop, proving your identity with a passport and other documents.
Was this done because the networks (who own the phone shops) insisted on it, as a condition of carrying the phone in their shops?

HT4314 I have two games Tribez and Tribez and Castles on my iPad. I have to send my iPad Air back for repair to crack glass. Is there any way to save the games., for when I have to restore back up

I have two games tribez and tribez and Castle. As my new iPad air has a cracked screen I have to send it back for repair. I have to do a reset and restore backup when I get it back. Is there any way to back up above games. On tribez I have reached level 99 and will be annoying to starts again.

Do you have a computer with iTunes on it that you have associated the iPad with?
If the answer is yes, simply set iTunes up to back up the device locally, fully sync the apps, photos, movies, etc. A copy of everything, including the config of the device and all your settings (scores) will be made on the computer's drive. This even includes a backup copy of all the apps. When you get the replacement device (probably a refurbished blank unit), a Restore from that backup will totally reconstruct what you have today.
If the answer is no, you will have quite a bit more work to do in order to get back to the original state that the iGadget is currently in (minus the crack).

Any way to re-try to connect when connection fails

Similar Messages

Maybe you are looking for