Any way to record mini displayport input?

Hey there,
Now that some companies offer hdmi and others to mini displayport adapters, I was wondering if the incoming data was "passing through" SL, or if it goes straight to display, so there would be no way to record it.
I'm asking because I want to webcast a live sport event this summer on the cheap. So I could use an external hdmi video switch, output that switch to the minidisplay port adapter then video mix on the fly using Wirecast.
Any answer is appreciated, thanks!

Hi
yes in Quicktime Pro click on file/new audio recording.
Or have a look at Audio-in http://www.versiontracker.com/dyn/moreinfo/macosx/15962 when run change audio device to 0xa27000401af2f
Tont

Similar Messages

Mini Displayport Input and Windows

When booted in Windows 7 on one of the 27" iMacs, is it possible to still utilize the Mini Displayport Input? The Apple + F2 to switch to input does not work when using Windows.

The video input function requires OS X to be running, so it won't work from Windows.

Is there any way to get Mini Bridge to show the color labels that are set in Bridge and/or Lightroom

Is there any way to get Mini Bridge to show the color labels that are set in Bridge and/or Lightroom?
I am using Cloud InDesign CS6 on Windows 7.

You will need to go via your computer's iTunes - to get music into the Music app you either need to download it directly on the iPad from the iTunes store app, or sync it from your computer's iTunes

Any way to record audio?

Hello,
Is there a way to record audio using iSight microphone with Quicktime or any other recording software? Weather saved in a mp3 of aiff, or.mov??
Michel

Hi
yes in Quicktime Pro click on file/new audio recording.
Or have a look at Audio-in http://www.versiontracker.com/dyn/moreinfo/macosx/15962 when run change audio device to 0xa27000401af2f
Tont

Is there any way to record a stereo signal on to a single track?

In other words, I would like to be able to record a stereo single track (without multi tracking) such as a guitar ran through a stereo effects pedal, or two microphones through a mixer panned extreme left & right. Any way to do this with Garageband on one track? I've tried two separate interfaces, a Apogee Jam and a Sonoma Wireworks via the 30-pin connector and it plays back in mono. Just wondering if there's an app that would facilitate stereo on one track?

By definition a single track is monophonic. Stereo requires two tracks and two channels.
If you have recorded a single track of electric guitar, you could route that to a stereo effect and you would have a stereo sound but it would still require two channels for playback.

Is there any way to record a whole call that is st...

My Skype recorder glitched and I lost the recording. The call is still going; is there a way to record the call from the beginning? Thanks.

Recording off Skype is like recording off the radio (if that's even done anymore), it's not like a DVR. The best you can do is continue to record the current audio. If you can resurrect whatever portion you saved earlier you may be able to splice the audio together. If your recorder didn't record it, then there isn't anything to retrieve since Skype doesn't record your calls.

Is there any way of recording a voice message for call waiting?

Hi,
I currently have the call waiting system set up on my iPhone, so i can see when other people are trying to call me whilst already on a call.
However i would like the caller to know that i'm aware of their call so was wondering if there is an app or any software where i am able to record a voiceno

What I'm saying is call waiting is a carrier feature so a recording to interrupt the incoming call while you continue to talk likely would have to be implemented by the carrier. I don't have a recorded message for call waiting but call your carrier to find out if they offer such a feature.

Using Labview's System Exec.vi, is there any way to send multiple standard inputs to the same executeable console? Or is there a way using Labview to target the window for the executeable and send commands to it at will?

thanks

One suggestion is to write a batch (.bat) file that will call your executable. The batch file can contain all the standard inputs necessary to run the executable. Then, in LabVIEW, you can call the .bat file using the System Exec.vi.
As far as your second question, there is no slick way to do this LabVIEW. You would probably have to call Window API functions using the Call Library Function utility. There is a set of VI's that call some of the standard API functions but I don't think they have what you want.
http://zone.ni.com/devzone/devzoneweb.nsf/opendoc?openagent&74DDE683A1AFF6988625683A000C0D73&cat=034E59A8530E09DF862568900018707A
Chris_Mitchell
Product Development Engineer
Certified LabVIEW Architect

Any way to record vocals and acoustic guitar at once?

I have been trying to get garage band to record me playing acoustic guitar while singing. Whenever I do it, I can't hear me singing. I use the firebox and connect into an MXL vocal mic.
Any suggestions?

59Sound wrote:
I can't hear me singing.
http://www.bulletsandbones.com/GB/GBFAQ.html#monitoron
(Let the page FULLY load. The link to your answer is at the top of your screen)

Is there any way to record a screen share session?

I know you can record audio and video chats that you yourself initiate. However, I have clients that invite me to screen share, and upon acceptance, I have no control over recording. Is there an app?

Hi,
In Snow Leopard and Lion there is Quicktime X (Screen Record.)
10:40 PM Thursday; August 4, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Is there any way to record your ios 7 screen in a way apple is ok with it.

What I mean by in a way that apple is ok with it is because apple has been kicking all of them of the App Store.

There is a way but you need a computer. On youTube Ben Rimes has a video "How to screen record from your iPad." Hopefully this link will get you there.
http://m.youtube.com/watch?v=3djvdn6hGYI

Mini Displayport input support

I have a late 2009 27" iMac now that I connect to my Dell via a mini display to display cable and in "Target Display Mode" can see my Dell's screen. I am looking at buying a new iMac, But am not sure if I will be able to do this anymore.
Does anyone know if this is still possible?

If I'm understanding the answers correctly it will not work anymore. I'm wanting what is on my Dell screen to go to the screen of my iMac by pressing cmd-f2 which I can do now with my current setup.I thought that was target Display. I am NOT trying to send the iMac screen to the Dell screen.
I have poor eye site and all of my business programs are on my small Dell laptop. I don't want to put Windows on my iMac so this setup has worked great for me the last few years.
As I mentioned in my first post I was going to buy a new iMac before the end of the year, but if I lose this feature I will hold off.
rkaufmann87, if I could bother you. Could you tell me if your statement you made is still correct before I confused everyone with the wrong terminology.
Thank you

Is there any way to record other apps in garageband? Like the animoog or ms20?

This is so important to utilize the sounds from my other apps. I need to connect audio from other apps to route into garageband as if they were plug ins that can be read as a garageband track. It would be even better if you could sync garageband midi to control these other apps. That would make ipad a complete production tool. It seems the ipad is powerful enough to run 2 apps at the same time.. So when will this be possible?

Not a question anyone here would be in a postion to answer.Nor is it clear Apple is all that interested in making the iPad "a complete prodcution tool". Difficult to say. You can offer Apple feedback here:
http://www.apple.com/feedback/

Any way to boost audio input when recording?

Hi; I have been recording speech interviews with Audio-Technica mics on a ProTools set-up and they've sounded great.
I've recently tried recording using the mics in Garageband using a M-Audio Mobile Pre USB, but the audio levels are always too low unless the subject is an inch or two from the mic, which isn't the best way to get quality audio.
Is there any way to boost the audio input when recording in GB or any other tricks people know of?
thx, Charlie

I'm actually having the same problem, except I'm recording straight into the computer (no interface).
I tried using an MBox, but the computer won't even recognize it...(if anyone's got suggestions for why that is, I'll gladly take them...).
My main question is the same as Charles's, however - how come the input level is so soft when recording using the "Built-In Input" (where I can use a mic, and have mobility) as opposed to the "Built-In Microphone"?

Any way to automate input for input prompts

Hi all,
For times when there is a input prompt, is there any method/way we can direct pass it in via unix scripting or sql script? Specially for password change in this scenario, which is database's default prompting.
Eg. I wanna change a user password. however there will be an input prompt. any way I can automate the input passing in? I understand that we can use "alter user" , but I am trying to stick to using password [username] to perform the change.
SQL> password [username];
password:
Thanks in advance.
Eugene

yea, I was planning to the thing as you mentioned
pass the username, old_password and new_password as parameters, and change the password without stopping for any manual input.
Reason being my current environment is using password [username] to change password, and I try to my very best to minimise changes. I am trying to come up with the script which is capable of minimising manual entry, by issuing prompts from my script and execute any sql activity from there automatically. I have idea on how to get it work if I apply the alter user convention, just wanna check whether is there any way to do it the password [username] approach.
Eugene

Any way to record mini displayport input?

Similar Messages

Maybe you are looking for