Any way to refresh the calendar?

iPhone 3G with MS Exchange Email, Contacts & Calendars set to manual fetch ...
In my mail Inbox, I can press the refresh button in the lower left to update the Inbox. Is there any way to do this in Calendar (other than changing my Fetch settings) or do I just have to open the Calendar app and wait for it to update? TIA.

You just need to exit then re-open the calendar app. With Push set to OFF and Fetch set to Manual, launching the app is what triggers a connection to the server. Mail is the only app with a 'check now' button.

Similar Messages

  • Is there any way to refresh the zfs snapshot other than creating another on

    Hi,
    I want to use the zfs send / recv replication, after I create the snapshot and do send/ recv to the remote filesystem, is there any way to do send and recv from the same snapshot after making some changes to the original filesystem other than creating another snapshot every time before send / recv
    Thanking you
    Ushas Symon

    No, you'd have to take another snapshot and then send it, but you don't need to save all the snapshots after you are done. If you script it out to take snapshots fairly often during the day, the amount of data would be small. You can also send to a file and then backup that file to tape or whatever, you wouldn't have to save a million snapshots. You can also look into OpenSolaris' Time Slider function.

  • While fetching the Audit Log Programmatically last Downloaded document is not fetched from Auditing Log. To update the events it is taking 5 to 10 mins. After that i can fetch the data. Is there any way to refresh the log to be reflected immediatly?

    SPAuditQuery wssQuery = new SPAuditQuery(SPContext.Current.Web.Site);
    wssQuery.RestrictToUser(SPContext.Current.Web.CurrentUser.ID);
    wssQuery.AddEventRestriction(SPAuditEventType.View);
    wssQuery.RestrictToList(list)       
    //set the query date range
    wssQuery.SetRangeEnd(DateTime.Now);
    wssQuery.SetRangeStart(DateTime.Now.AddMinutes(-30));// To get the last 30 Mins of data
    SPContext.Current.Web.Site.Audit.Update();
    SPContext.Current.Web.Update();                     
    SPAuditEntryCollection auditCol = SPContext.Current.Web.Site.Audit.GetEntries(wssQuery); 

    From your response, I understood that, The coding is okay. So no need to change the code.
    I am not sure what/How to be validated the Lag. Can you please suggest more on detail ?
    One more thing observed based on the below steps
    1. Downloaded 3 documents sequentially
    2. Gave pause for 15 seconds
    3. Downloaded next 2  documents sequentially
    4. Executed my above mentioned program
    Result : Fetched only first 3 documents, documents which are downloaded after pause is not retrieved
    5. Generated the custom report (or ) Do new Download
    Result : I can See 5 Documents (In case of 5th step is new download, I can See 5 Documents instead of 6 documents)
    6:  Executed my above mentioned program
    Result : I can See 5 Documents (In case of 5th step is new download, I can See 5 Documents instead of 6 documents)
    Conclusion: Most recent download event is pushed by other relevant(Custom Report Generation or Download or Page Refresh) event
    Am i Missing anything to obtain the proper result ?

  • Is there any way to put the mini calendar on the monthly calendar as in Leopard?

    I downloaded Lion about a month ago and the only dislike is ical. For one is there any way to put the mini calendar on the monthly display as it was in Snow Leopard. It makes it much easier instead of flip flopping back and forth to see last month or previous months?

    Nope

  • .  It's not clear to me if the default sync for calendar is the iphone or my mac (shows 82 modifications).  I want it to default to the mac but the wording suggests the iphone.  Also, I don't see any way to do the syncy

    I'm having trouble with a sync alert.  It's not clear to me if the default sync for calendar is my iphone (3G) or my mac (shows 82 modifications).  I want it to default to the mac but the wording suggests the iphone.  Anybody know the default device and if it can be and if the other can be selected if desired
    Also, I don't see any way to do the sync on an individual entry basis for calendar.  Looks like it will only do all of them at once.  I'd like to go through them one by one to confirm which entry is correct.
    Thanks
    PS This message ("Syncing with [OWNER'S NAME] iphone will change more than xx% of your calendars events or todos on this computer) only started when I recently updated my OS.

    bubblesblom wrote:
    Okay, so my friends think it is funny to change the passcode on my iPhone.
    Maybe you should get new friends.
    I'm not sure that recovery mode works when you have to trust the computer, but did you try it?
    If you can't update or restore your iOS device - Apple Support
    If that won't work, perhaps you can use Find my iPhone from a computer in your iCloud.com account to erase the device.
    iCloud: Erase your device - Apple Support
    This has nothing to do with the Find my iPhone app being installed on the phone, but you do have to have Find my iPhone activated in the iCloud settings on the phone.

  • When I updated to ios5, I lost all of my calendar entries. Is there any way to retrieve the information?

    When I updated my iPad to ios5, I lost all my calendar entries. Is ther any way to retrieve the information? This was before iCloud was up and running.

    try and restore you ipad maybe that would work

  • Is there any  way to Mask the Name when  a select statement is issued?

    Dear all,
    Is there any way to mask the name .. i mean if User issue a select statement in a customer table the real name should come like ' ABCXXXDEFXXCFXX'... Which is not the actual name?
    e.g if Name: CHIEV SONG MEE
    If user issue a statment select * from customers;
    The Result Should come something Like this:
    Name
    CHXXV SXNG MXX
    Thank You

    user3029023 wrote:
    but it seems there is no option in oracle it self which can be used as there they are saying to get a data masking software which we can't due to some internal issues....I would not say that. How one implements masking depends entirely on the requirements that need to be met.
    For example, schema A owns all the tables. Schema B can be created as a "trusted" schema - in other words, schema A trusts schema B and allows it full access (with grants) to its tables. Schema B implements data masking as views. For each table in A, a view exists in B that implements the required masking. B can now grant select access on these views to user C. User C will see the same data object names in B as it would have if it used A - only, by using the B data objects it uses masked data objects and not the original source data objects.
    Another example - schema Dev is to have all the data objects of schema Prod, but masked where needed. One can use CTAS (Create Table As Select) to create the required tables in Dev with masked values where relevant. This Dev schema can be "refreshed" on weekends by dropping all tables and getting a new fresh copy of production data and masking it - ready for the next week's development cycle.
    If the application use is for example APEX, then instead of coding SQL directly as reporting regions to display, a function is used instead. APEX supports reporting regions where it calls a function and this function provides the APEX run-time with the SQL to execute and contents to render. It is easy to use this approach to implement logic in functions that masked column data depending on who the APEX user is, the security/role attributes of the user, and so on.
    No there is not a single "+mask this column!+" feature in Oracle.. but that does not mean that such a feature is not supported and cannot be implemented. Oracle has a very comprehensive and rich set of tools - more so than most (if not all) other RDBMS products.
    It is up to the architect/designer/developer to use this toolkit in creating a system that meets the specific requirements at hand.

  • The old calender iOS6, in the year view, it shows how much busy I am in a day by indicating the color intensity. But the new calendar year view is totally useless!!! also too bright!! Why apple does this?? What is the way to revert the calendar back???

    The old calender iOS6, in the year view, it shows how much busy I am in a day by indicating the color intensity. But the new calendar year view is totally useless!!! also too bright!! Why apple does this?? What is the way to revert the calendar back???

    Unfortunately, that's the way the cookie crumbles nowadays. Sir Jony Ive's GUI design for iOS7 has been met with much skepticism (to say the least). But until the company sees the compelling need for an adjustment or reversal, it "ain't happenin' ". So amble over to the feedback page ( http://www.apple.com/feedback/ ) and make your displeasure known to the company, OR make it known by not purchasing its products. Because as long as the iGadgets continue selling as fast as they can make them, they will see no need for change.
    BTW, do note you are NOT talking to Apple here. This is just a user-to-user forum.
    Edit: for now, you can also try out any of the alternate calendaring apps available in the App Store.

  • Is there any way to hide the column header in BW workbook?

    I have inserted a query into a workbook. But I don't want the column header to be shown. Is there any way to hide the column header? Thanks.

    Hi,
    If you want to do any custom formatting to the workbook and you do not want it to reset when you refresh the workbook,
    You will have to You can deactivate the function for adjusting the formatting (Adjust Formatting after Refreshing) in the Display Options of the Query Properties.
    When you do this, you can have your own formatting for the workbook and it will not be affected when you refresh the workbook.
    Regards,
    Joe

  • Is there any way to prevent the OS from querying the Superdrive when start

    Just a random question. Whenever my MacBook Pro starts up (either from sleep or a complete/fresh start, the OS queries the drive slot to see if there is a disc present. While this may be normal behavior, it seems to slow down the start up process. (I rarely ever have a disc in the drive). Just curious if this, in fact, normal, or if there's something awry.

    Is there any way to prevent the OS from querying the Superdrive when start
    No
    he OS queries the drive slot to see if there is a disc present.
    How can you tell? Based on the noise it makes?

  • Is there any way to retreive the FileName in the mapping

    Is there any way to retreive the FileName and so that I can use that in my mapping. This is FILE2RFC scenario with NO BPM.
       I am using the adapter specific message attributes in the file sender CC.
    Thanks,
    Ravi
    null

    Yes you can retreive it.  Create an simple user defined function in the mapping and use the following code.
    Imports: com.sap.aii.mapping.api.*;
    Parameter: String filename
    Paramter: String filename;
    filename = fileName + ".DAT";
    DynamicConfiguration conf = (DynamicConfiguration) container
    .getTransformationParameters()
    .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", "FileName");
    conf.put(key, filename);
    return filename;
    Or
    Just do whatever mentioned in this weblog:
    /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
    ---Satish

  • Is there any way to repeat the last action on a new selection?

    I'm playing with Pages to see if I can use it instead of Word. I'm very expert with Word, just starting with Pages. Like some things, don't like some, but I think it's worth continuing to play with it to see if it will work for me. One problem I've been having is repeating an action. In Word, if you do something (in the particular situation I just had, it was deleting a row in a table), and then click on another place and do command-Y, it repeats what you did. Similarly, if you format a word as bold, say, and then select another word and do command-Y the second word will also be made bold. I realize the latter can be done in pages by selecting "emphasis" style for the second word, but I couldn't figure out any work-around for deleting the table rows (I tried selecting several non-adjacent rows, but "delete row" was greyed out on the actions menu). Any way to do this that I've missed?

    Thanks anyway. I'm sorry that Apple didn't include a "repeat" keyboard shortcut - going to the Inspector and then the actions wheel and then "delete row" time after time wasn't fun.
    I'm afraid I failed to communicate well about outline format - I didn't mean a bulleted or numbered list, I do know how to do that, but rather making a single character (or in my particular interest a symbol, the diamond and heart suit symbols) appear in outline text format. You can do it by going to format->font->outline, but if I want to do it for several occurrences of the same thing (or a few different things), it's not much fun to do it that way. But maybe I can define a character format that's outline and that will work. Still would prefer to have a keyboard shortcut to apply the character format though.
    Incidentally, while I'm talking about diamonds and hearts, is there any way to change the amount of space that gets put in after the diamond and heart symbols if you insert them using Edit->Special Characters? I write a lot of documents that use those symbols and lines end up unevenly spaced because of the large amount of space below each symbol (I've figured out a partial work-around - I defined a style for "body after suit symbol" that is raised enough to get the line spacing right, but that only works when I want to have a hard return at the end of the line with the suit symbols, since if the lines wrap, both lines have to have the same paragraph formatting. This problem isn't really Pages related - I have the same difficult with Word .

  • Is there any way to identify the particular socket connection is closed ?

    Is there any way to identify the particular socket connection is closed or not ?
    Any methods ???
    How can the program knows the connection is lost or some thing ...
    Is the socket throws some excpetions when there is no active connection ???
    namanc

    If you get an IOException when you try to use the socket, the connection was obviously closed.
    The correct way for an application to know if the socket was closed is:
    1) the server sends a message indicating that the socket should be closed
    2) the client closes the socket itself

  • Is there any way to get the height/width of an image before importing it in the indesign document.

    Hi All,
    I need to obtain an image's attributes such as dimensions (height, width in pixels) without placing image in indesign document.
    I have full path of the image (say abc.jpg is stored at c:\my pic\abc.jpg).
    I have obtained the IDFile for this image, tried getting size using GetFileSize() which correctly return size in bytes.
    Is there any way to get the height/width of image without importing it in the indesign document.
    Please, give me some hints. I have spent quite a lot time digging in CHM. I have searched in FileUtils, IDFile API's but found no method which serves this purpose.
    At this point I am clueless where to search next.
    Any help will be appriciated.
    Just a point to mention, I am able to get image height and width for an image in indesign doc though Its not my requirement.
    Thnx,
    D.

    You might be able to examine the contents of the PlaceGun after calling kImportAndLoadPlaceGunCmdBoss without actually placing the image in a document. Not sure, but would be worth looking at.
    Otherwise you will probably have to write platform specific code, ideally with a generic platform-independant wrapper (see SDKSamples/paneltreeview/PlatformFileSystemIterator).
    For the Mac, look at CGImageGetWidth() etc., not sure what the best option is for windows.
    Perhaps Quicktime could provide you with a platform independant solution.

  • Any way to get the old behavior of "Hyperdraw Other"

    In Logic 4.7 one could type ^Command-O to bring up a dialog, then simply type in a controller number and RETURN. That's all you needed to do to hyperdraw any arbitrary controller.
    In Logic 7 you type ^Command-O which brings up a long list. No text entry box. You are then forced to use your mouse to scroll waaaay down the list to the controller you want. To add insult to injury you are then forced to use the mouse again to click on the close box to close the window. Yes, this is one of those nifty new-fangled windows without a "CLOSE WINDOW" key command.
    Is there any way to replicate the old behavior of Hyperdraw >Other?
    I don't want to rant but it seems to me that the speedy interface of logic 4.7 has given way to uber-bloat in logic 7. I hope this isn't the general direction things are going.

    Hi K,
    ⌘ W
    Yes, it does close the floating window on my system.
    Coming fresh off the transition from 4.7 the distinction is vivid. You may not remember
    Probably not, since I made every upgrade along the way, though skipped a lot of V5's primetime.
    In my opinion once you start adding up a bunch of "nowhere near as terrible"s and your forced to do them again and again day after day they add up to one big terrible.
    Agreed - but some adaption is of course to be expected (at least, IMO). Some is for the better, some is for the worse. Overall, I find the workflow faster with 7 than 4 but again, my memory is not as vivid as yours.
    Cheers,
    J

Maybe you are looking for